RESUMEN
We show transmission of 20 wavelength-division-multiplexed (WDM) × 960-Gb/s space-division-multiplexed 32QAM modulated channels (spectral efficiency (SE) of 15 bits/s/Hz) over 60 km of few-mode fiber (FMF) with inline few-mode EDFA (FM-EDFA). Soft-decision FEC was implemented and used to achieve error-free transmission.
RESUMEN
We successfully fabricate three-mode erbium doped fiber with a confined Er(3+) doped ring structure and experimentally characterize the amplifier performance with a view to mode-division multiplexed (MDM) transmission. The differential modal gain was effectively mitigated by controlling the relative thickness of the ring-doped layer in the active fiber and pump launch conditions. A detailed study of the modal gain properties, amplifier performance in a MDM transmission system and inter-modal cross-gain modulation and associated transient effects is presented.
Asunto(s)
Amplificadores Electrónicos , Tecnología de Fibra Óptica/instrumentación , Láseres de Estado Sólido , Telecomunicaciones/instrumentación , Diseño de Equipo , Análisis de Falla de EquipoRESUMEN
Transmission of a 73.7 Tb/s (96 x 3 x 256-Gb/s) DP-16QAM mode-division-multiplexed signal over 119 km of few-mode fiber transmission line incorporating an inline multi mode EDFA and a phase plate based mode (de-)multiplexer is demonstrated. Data-aided 6 x 6 MIMO digital signal processing was used to demodulate the signal. The total demonstrated net capacity, taking into account 20% of FEC-overhead and 7.5% additional overhead (Ethernet and training sequences), is 57.6 Tb/s, corresponding to a spectral efficiency of 12 bits/s/Hz.
RESUMEN
We compare the transmission performance of 112-Gb/s POLMUX-QPSK modulation over large-A(eff) Pure-Silica core fiber and SSMF using EDFA-only amplification. The higher nonlinear threshold of the large-A(eff) Pure-Silica core fiber allows for a 55% increase in transmission distance. By using back-propagation an additional 10% increase is observed. In case spans with equal length for both fiber types and two splices per span only would have been used, resulting in a lower span loss for the large-A(eff) Pure-Silica core fiber, the total increase grows to 85%.