Neoglycosylated Collagen: Effect on Neuroblastoma F-11 Cell Lines.

The regeneration of the nervous system is a challenging task. Currently, regenerative medicine approaches that exploit nature-inspired cues are being studied and hold great promise. The possibility to use protein-based matrices functionalized with small oligo- and monosaccharides is of interest since these can be finely tuned to better mimic the native environment. Collagen has been selected as a promising material that has the potential to be further tailored to incorporate carbohydrates in order to drive cell behavior towards neuroregeneration. Indeed, the grafting of carbohydrates to collagen 2D matrices is proved to enhance its biological significance. In the present study, collagen 2D matrices were grafted with different carbohydrate epitopes, and their potential to drive F-11 neuroblastoma cells towards neuronal differentiation was evaluated. Collagen functionalized with α-glucosides was able to differentiate neuroblastoma cells into functional neurons, while sialyl α-(2→6)-galactosides stimulated cell proliferation.

Crystal structure of the deglycating enzyme Amadoriase I in its free form and substrate-bound complex.

Amadoriases, also known as fructosyl amine oxidases (FAOX), are enzymes that catalyze the de-glycosylation of fructosyl amino acids. As such, they are excellent candidates for the development of enzyme-based diagnostic and therapeutic tools against age- and diabetes-induced protein glycation. However, mostly because of the lack of a complete structural characterization of the different members of the family, the molecular bases of their substrate specificity have yet to be fully understood. The high resolution crystal structures of the free and the substrate-bound form of Amadoriase I shown herein allow for the identification of key structural features that account for the diverse substrate specificity shown by this class of enzymes. This is of particular importance in the context of the rather limited and partially incomplete structural information that has so far been available in the literature on the members of the FAOX family. Moreover, using molecular dynamics simulations, we describe the tunnel conformation and the free energy profile experienced by the ligand in going from bulk water to the catalytic cavity, showing the presence of four gating helices/loops, followed by an "L-shaped" narrow cavity. In summary, the tridimensional architecture of Amadoriase I presented herein provides a reference structural framework for the design of novel enzymes for diabetes monitoring and protein deglycation. Proteins 2016; 84:744-758. © 2016 Wiley Periodicals, Inc.

Hierarchical structure and nanomechanics of collagen microfibrils from the atomistic scale up.

Collagen constitutes one-third of the human proteome, providing mechanical stability, elasticity, and strength to organisms and is the prime construction material in biology. Collagen is also the dominating material in the extracellular matrix and its stiffness controls cell differentiation, growth, and pathology. However, the origin of the unique mechanical properties of collagenous tissues, and in particular its stiffness, extensibility, and nonlinear mechanical response at large deformation, remains unknown. By using X-ray diffraction data of a collagen fibril (Orgel, J. P. R. O. et al. Proc. Natl. Acad. Sci. 2006, 103, 9001) here we present an experimentally validated model of the nanomechanics of a collagen microfibril that incorporates the full biochemical details of the amino acid sequence of constituting molecules and the nanoscale molecular arrangement. We demonstrate by direct mechanical testing that hydrated (wet) collagen microfibrils feature a Young's modulus of ≈300 MPa at small, and ≈1.2 GPa at larger deformation in excess of 10% strain, which is in excellent agreement with experimental data. We find that dehydrated (dry) collagen microfibrils show a significantly increased Young's modulus of ≈1.8-2.25 GPa, which is in agreement with experimental measurements and owing to tighter molecular packing. Our results show that the unique mechanical properties of collagen microfibrils arise due to their hierarchical structure at the nanoscale, where key deformation mechanisms are straightening of twisted triple-helical molecules at small strains, followed by axial stretching and eventual molecular uncoiling. The establishment of a model of hierarchical deformation mechanisms explains the striking difference of the elastic modulus of collagen fibrils compared with single molecules, which is found in the range of 4.8 ± 2 GPa, or ≈10-20 times greater. We find that collagen molecules alone are not capable of providing the broad range of mechanical functionality required for physiological function of collagenous tissues. Rather, the existence of an array of deformation mechanisms, derived from the hierarchical makeup of the material, is critical to the material's ability to confer key mechanical properties, specifically large extensibility, strain hardening, and toughness, despite the limitation that collagenous materials are constructed from only few distinct amino acids. The atomistic model of collagen microfibril mechanics now enables the bottom-up elucidation of structure-property relationships in a broader class of collagen materials (e.g., tendon, bone, cornea), including studies of genetic disease where the incorporation of biochemical details is essential. The availability of a molecular-based model of collagen tissues may eventually result in novel nanomedicine approaches to develop treatments for a broad class of collagen diseases and the design of de novo biomaterials for regenerative medicine.

Fabrication Strategies Towards Hydrogels for Biomedical Application: Chemical and Mechanical Insights.

This review aims at giving selected chemical and mechanical insights on design criteria that should be taken into account in hydrogel production for biomedical applications. Particular emphasis will be given to the chemical aspects involved in hydrogel design: macromer chemical composition, cross-linking strategies and chemistry towards "conventional" and smart/stimuli responsive hydrogels. Mechanical properties of hydrogels in view of regenerative medicine applications will also be considered.

Trends in biomedical engineering: focus on Smart Bio-Materials and Drug Delivery.

The present article reviews on different research lines, namely: drug and gene delivery, surface modification/modeling, design of advanced materials (shape memory polymers and biodegradable stents), presently developed at Politecnico di Milano, Italy. For gene delivery, non-viral polycationic-branched polyethylenimine (b-PEI) polyplexes are coated with pectin, an anionic polysaccharide, to enhance the polyplex stability and decrease b-PEI cytotoxicity. Perfluorinated materials, specifically perfluoroether, and perfluoro-polyether fluids are proposed as ultrasound contrast agents and smart agents for drug delivery. Non-fouling, self-assembled PEG-based monolayers are developed on titanium surfaces with the aim of drastically reducing cariogenic bacteria adhesion on dental implants. Femtosecond laser microfabrication is used for selectively and spatially tuning the wettability of polymeric biomaterials and the effects of femtosecond laser ablation on the surface properties of polymethylmethacrylate are studied. Innovative functionally graded Alumina-Ti coatings for wear resistant articulating surfaces are deposited with PLD and characterized by means of a combined experimental and computational approach. Protein adsorption on biomaterials surfaces with an unlike wettability and surface-modification induced by pre-adsorbed proteins are studied by atomistic computer simulations. A study was performed on the fabrication of porous Shape Memory Polymeric structures and on the assessment of their potential application in minimally invasive surgical procedures. A model of magnesium (alloys) degradation, in a finite element framework analysis, and a bottom-up multiscale analysis for modeling the degradation mechanism of PLA matrices was developed, with the aim of providing valuable tools for the design of bioresorbable stents.

Integrating Biosensors in Organs-on-Chip Devices: A Perspective on Current Strategies to Monitor Microphysiological Systems.

Organs-on-chip (OoC), often referred to as microphysiological systems (MPS), are advanced in vitro tools able to replicate essential functions of human organs. Owing to their unprecedented ability to recapitulate key features of the native cellular environments, they represent promising tools for tissue engineering and drug screening applications. The achievement of proper functionalities within OoC is crucial; to this purpose, several parameters (e.g., chemical, physical) need to be assessed. Currently, most approaches rely on off-chip analysis and imaging techniques. However, the urgent demand for continuous, noninvasive, and real-time monitoring of tissue constructs requires the direct integration of biosensors. In this review, we focus on recent strategies to miniaturize and embed biosensing systems into organs-on-chip platforms. Biosensors for monitoring biological models with metabolic activities, models with tissue barrier functions, as well as models with electromechanical properties will be described and critically evaluated. In addition, multisensor integration within multiorgan platforms will be further reviewed and discussed.

Fluid dynamics characterization and thrombogenicity assessment of a levitating centrifugal pump with different impeller designs.

Technical guidelines nowadays recommend and regulate the use Computational Fluid Dynamics (CFD) to assess the performance of medical devices. CFD coupled to blood damage models has emerged as a powerful tool to evaluate the hemocompatibility of blood recirculating devices. The present study is aimed at evaluating the hydrodynamic performance and the thrombogenic potential of two prototypes of magnetically levitating centrifugal pumps. The two devices differ in the impeller configuration - 6-blades vs. 12-blades - and have been designed to be used in Cardiopulmonary Bypass (CPB) circuits during open heart surgery and in Extracorporeal Membrane Oxygenation (ECMO) to support patients with severe cardiac or respiratory failure. The pumps have been modelled using Direct Numerical Simulation coupled to Lagrangian analysis to predict platelet activation due to abnormal shear stress histories. Numerical results have been compared with experimental data in terms of head generation for different working points. Results show that the 6-blades pump has i) smaller stagnation areas, ii) lower stress levels and iii) higher strain rate, resulting in a lower thrombogenic potential, whereas the 12-blade impeller guarantees a more stable performance at high flow rates, suggesting its preferential use for more demanding applications, such as CPB.

Molecular and mesoscale mechanisms of osteogenesis imperfecta disease in collagen fibrils.

Osteogenesis imperfecta (OI) is a genetic disorder in collagen characterized by mechanically weakened tendon, fragile bones, skeletal deformities, and in severe cases, prenatal death. Although many studies have attempted to associate specific mutation types with phenotypic severity, the molecular and mesoscale mechanisms by which a single point mutation influences the mechanical behavior of tissues at multiple length scales remain unknown. We show by a hierarchy of full atomistic and mesoscale simulation that OI mutations severely compromise the mechanical properties of collagenous tissues at multiple scales, from single molecules to collagen fibrils. Mutations that lead to the most severe OI phenotype correlate with the strongest effects, leading to weakened intermolecular adhesion, increased intermolecular spacing, reduced stiffness, as well as a reduced failure strength of collagen fibrils. We find that these molecular-level changes lead to an alteration of the stress distribution in mutated collagen fibrils, causing the formation of stress concentrations that induce material failure via intermolecular slip. We believe that our findings provide insight into the microscopic mechanisms of this disease and lead to explanations of characteristic OI tissue features such as reduced mechanical strength and a lower cross-link density. Our study explains how single point mutations can control the breakdown of tissue at much larger length scales, a question of great relevance for a broad class of genetic diseases.

Mechanical properties of physiological and pathological models of collagen peptides investigated via steered molecular dynamics simulations.

In this work we used molecular simulations to investigate the elastic properties of collagen single chain and triple helix with the aim of understanding its features starting from first principles. We analysed ideal collagen peptides, homotrimeric and heterotrimeric collagen type I and pathological models of collagen. Triple helices were found much more rigid than single chains, thus enlightening the important role of interchain stabilizing forces, like hydrophobic interaction and hydrogen bonds. We obtained Young's moduli close to 4.5GPa for the ideal model of collagen and for the physiological heterotrimer, while the physiological homotrimer presented a Young's modulus of 2.51GPa, that can be related to a mild form of Osteogenesis Imperfecta in which only the homotrimeric form of collagen type I is produced. Otherwise, the pathological model (presenting a glycine to alanine substitution) showed an elastic modulus of 4.32GPa, thus only slightly lower than the ideal model. This suggests that this mutation only slightly affects the mechanical properties of the collagen molecule, but possibly acts on an higher scale, such as the packing of collagen fibrils.

Mechanical response and conformational changes of alpha-actinin domains during unfolding: a molecular dynamics study.

Alpha-actinin is a cytoskeleton-binding protein involved in the assembly and regulation of the actin filaments. In this work molecular dynamics method was applied to investigate the mechanical behaviour of the human skeletal muscle alpha-actinin. Five configurations were unfolded at an elongation speed of 0.1 nm/ps in order to investigate the conformational changes occurring during the extension process. Moreover, a sensitivity analysis at different velocities was performed for one of the R2-R3 spectrin-like repeat configuration extracted in order to evaluate the effect of the pulling speed on the mechanical behaviour of the molecule. Two different behaviours were recognized with respect to the pulling speed. In particular, at speed higher than 0.025 nm/ps a continuous rearrangement without evident force peaks was obtained, on the contrary at lower speed evident peaks in the range 500-750 pN were detected. R3 repeat resulted more stable than R2 during mechanical unfolding, due to the lower hydrophobic surface available to the solvent. The characterization of the R2-R3 units can be useful for the development of cytoskeleton network models based on stiffness values obtained by analyses performed at the molecular level.

Estimation of the binding force of the collagen molecule-decorin core protein complex in collagen fibril.

Decorin belongs to the small leucine proteoglycans family and is considered to play an important role in extracellular matrix organization. Experimental studies suggest that decorin is required for the assembly of collagen fibrils, as well as for the development of proper tissue mechanical properties. In tendons, decorins tie adjoining collagen fibrils together and probably guarantee the mechanical coupling of fibrils. The decorin molecule consists of one core protein and one glycosaminoglycan chain covalently linked to a serine residue of the core protein. Several studies have indicated that each core protein binds to the surface of collagen fibrils every 67 nm, by interacting non-covalently to one collagen molecule of the fibril surface, while the decorin glycosaminoglycans extend from the core protein to connect to another decorin core protein laying on adjacent fibril surface. The present paper investigates the complex composed of one decorin core protein and one collagen molecule in order to obtain their binding force. For this purpose, molecular models of collagen molecules type I and decorin core protein were developed and their interaction energies were evaluated by means of the molecular mechanics approach. Results show that the complex is characterized by a maximum binding force of about 12.4 x 10(3) nN and a binding stiffness of 8.33 x 10(-8) N/nm; the attained binding force is greater than the glycosaminoglycan chain's ultimate strength, thus indicating that overloads are likely to damage the collagen fibre's mechanical integrity by disrupting the glycosaminoglycan chains rather than by causing decorin core protein detachment from the collagen fibril.

Molecular assessment of the elastic properties of collagen-like homotrimer sequences.

Knowledge of the mechanical behavior of collagen molecules is critical for understanding the mechanical properties of collagen fibrils that constitute the main architectural building block of a number of connective tissues. In this study, the elastic properties of four different type I collagen 30-residue long molecular sequences, were studied by performing stretching simulations using the molecular mechanics approach. The energy-molecular length relationship was achieved by means of the geometry optimization procedure for collagen molecule strains up to 10%. The energy was interpolated by a second order function, and the second order of the derivative with respect to the mean length corresponded to the molecule stiffness. According to the hypothesis of linear elastic behavior, except for one sequence, the elastic modulus was around 2.40 GPa. These values are larger than fibril values, and they confirm the hypothesis that tendon mechanical properties are deeply related to tendon hierarchical structure. A possible explanation of the lowest values obtained for one sequence (1.33-1.53 GPa) is provided and discussed.

CAMM techniques for the prediction of the mechanical properties of tendons and ligaments nanostructures.

Theoretical prediction of the mechanical properties of soft tissues usually relies on a top-down approach; that is analysis is gradually refined to observe smaller structures and properties until technical limits are reached. Computer-Assisted Molecular Modeling (CAMM) allows for the reversal of this approach and the performance of bottom-up modeling instead. The wealth of available sequences and structures provides an enormous database for computational efforts to predict structures, simulate docking and folding processes, simulate molecular interactions, and understand them in quantitative energetic terms. Tendons and ligaments can be considered an ideal arena due to their well defined and highly organized architecture which involves not only the main structural constituent, the collagen molecule, but also other important molecular "actors" such as proteoglycans and glycosaminoglycans. In this ideal arena each structure is well organized and recognizable, and using the molecular modeling tool it is possible to evaluate their mutual interactions and to characterize their mechanical function. Knowledge of these relationships can be useful in understanding connective tissue performance as a result of the cooperation and mutual interaction between different biological structures at the nanoscale.

Short-term effects of microstructured surfaces: role in cell differentiation toward a contractile phenotype.

Cell adhesion plays a key role in cell behavior, in terms of migration, proliferation, differentiation and apoptosis. All of these events concur with tissue regeneration and remodeling mechanisms, integrating a complex network of intracellular signaling modules. Morphogenetic responses, which involve changes in cell shape, proliferation and differentiation, are thought to be controlled by both biochemical and biophysical cues. Indeed, the extracellular matrix not only displays adhesive ligands necessary for cell adhesion but also plays an essential biomechanical role - responsible, for instance, for the acquisition of the contractile phenotype. The substrate topography around the forming tissues and the associated mechanical stresses that are generated regulate cellular morphology, proliferation and differentiation. Thus, the ability to tailor topographical features around cells can be a crucial design parameter in tissue engineering applications, inducing cells to exhibit the required performances.In this work, we designed micropillared substrates using highly spaced arrays (interspacing equal to 25 µm) to evaluate the effects of topography on C2C12 myoblasts' adhesion and differentiation. Optical and fluorescence microscopy images were used to observe cell adhesion, together with Western blot analysis on vinculin and focal adhesion kinase (FAK) expression, a protein highly involved in adhesive processes. Differentiation marker (Myf5, myogenin and myosin heavy chain [MHC]) expression was also studied, in relation to the effect of different substrate topographies on the enhancement of a contractile phenotype. Our results demonstrated that microstructured surfaces may play a key role in the regeneration of functional tissues.

Skin nanostructural features determine suture biomechanics.

The stress state surrounding wounds in the skin plays an important role in the healing process; it affects the tissue strength, its aesthetic, and its resistance to infections. In this paper, the collagen fibril and elastin matrix damage mechanics following suture point application is investigated at the nanoscale; to this purpose, a model has been developed, which accounts for the architectural and mechanical features of the tissue components. Results indicate that the force displacement caused by the suture point application curve initially stiffens and subsequently softens. Softening occurs due at first to the enlargement of the elastin matrix damaged area and second to the collagen fibril disruption. Three regions may be identified: the first one, (0-0.38 N) refers to skin withstanding the force both in the collagen and elastin components; the second one (0.38-0.75 N) concerns the mechanism of elastin matrix damage; in the last one (> 0.75 N), the collagen fibrils also fail. Accordingly, by properly choosing the number of suture points, it is possible to define the optimal suture points number for a given wound closure force.

Age- and diabetes-related nonenzymatic crosslinks in collagen fibrils: candidate amino acids involved in Advanced Glycation End-products.

Ageing and diabetes share a common deleterious phenomenon, the formation of Advanced Glycation Endproducts (AGEs), which accumulate predominantly in collagen due to its low turnover. Though the general picture of glycation has been identified, the detailed knowledge of which collagen amino acids are involved in AGEs is still missing. In this work we use an atomistic model of a collagen fibril to pinpoint, for the first time, the precise location of amino acids involved in the most relevant AGE, glucosepane. The results show that there are 14 specific lysine-arginine pairs that, due to their relative position and configuration, are likely to form glucosepane. We find that several residues involved in AGE crosslinks are within key collagen domains, such as binding sites for integrins, proteoglycans and collagenase, hence providing molecular-level explanations of previous experimental results showing decreased collagen affinity for key molecules. Altogether, these findings reveal the molecular mechanism by which glycation affects the biological properties of collagen tissues, which in turn contribute to age- and diabetes-related pathological states.

Carbohydrate-functionalized collagen matrices: design and characterization of a novel neoglycosylated biomaterial.

Collagen matrices have been neoglycosylated with lactose by reductive amination at lysine side chains. AFM analysis highlights that the chemical does not affect molecular assembly into fibrils. Moreover, ELLA biochemical assays show that the glycan moiety is efficiently exposed on the matrix surface for receptor recognition.

Nanomechanics of collagen microfibrils.

Collagen constitutes one third of the human proteome, providing mechanical stability, elasticity and strength to organisms and is thus the prime construction material in biology. Collagen is also the dominating material in the extracellular matrix where its stiffness controls cell differentiation, growth and pathology. We use atomistic-based hierarchical multiscale modeling to describe this complex biological material from the bottom up. This includes the use and development of large-scale computational modeling tools to investigate several aspects related to collagen-based tissues, including source of visco-elasticity and deformation mechanisms at the nanoscale level. The key innovation of this research is that until now, collagen materials have primarily been described at macroscopic scales, without explicitly understanding the mechanical contributions at the molecular and fibrillar levels. The major impact of this research will be the development of fundamental models of collagenous tissues, important to the design of new scaffolding biomaterials for regenerative medicine as well as for the understanding of collagen-related diseases.

Atomistic modeling of water diffusion in hydrolytic biomaterials.

One of the most promising applications of hydrolytically degrading biomaterials is their use as drug release carriers. These uses, however, require that the degradation and diffusion of drug are reliably predicted, which is complex to achieve through present experimental methods. Atomistic modeling can help in the knowledge-based design of degrading biomaterials with tuned drug delivery properties, giving insights on the small molecules diffusivity at intermediate states of the degradation process. We present here an atomistic-based approach to investigate the diffusion of water (through which hydrolytic degradation occurs) in degrading bulk models of poly(lactic acid) or PLA. We determine the water diffusion coefficient for different swelling states of the polymeric matrix (from almost dry to pure water) and for different degrees of degradation. We show that water diffusivity is highly influenced by the swelling degree, while little or not influenced by the degradation state. This approach, giving water diffusivity for different states of the matrix, can be combined with diffusion-reaction analytical methods in order to predict the degradation path on longer time scales. Furthermore, atomistic approach can be used to investigate diffusion of other relevant small molecules, eventually leading to the a priori knowledge of degradable biomaterials transport properties, helping the design of the drug delivery systems.

Viscoelastic properties of model segments of collagen molecules.

Collagen is the prime construction material in vertebrate biology, determining the mechanical behavior of connective tissues such as tendon, bone and skin. Despite extensive efforts in the investigation of the origin of collagen unique mechanical properties, a deep understanding of the relationship between molecular structure and mechanical properties remains elusive, hindered by the complex hierarchical structure of collagen-based tissues. In particular, although extensive studies of viscoelastic properties have been pursued at the macroscopic (fiber/tissue) level, fewer investigations have been performed at the smaller scales, including in particular collagen molecules and fibrils. These scales are, however, important for a complete understanding of the role of collagen as an important constituent in the extracellular matrix. Here, using an atomistic modeling approach, we perform in silico creep tests of a collagen-like peptide, monitoring the strain-time response for different values of applied external load. The results show that individual collagen molecules exhibit a nonlinear viscoelastic behavior, with a Young's modulus increasing from 6 to 16GPa (for strains up to 20%), a viscosity of 3.84.±0.38Pa·s, and a relaxation time in the range of 0.24-0.64ns. The single molecule viscosity, for the first time reported here, is several orders of magnitude lower than the viscosity found for larger-scale single collagen fibrils, suggesting that the viscous behavior of collagen fibrils and fibers involves additional mechanisms, such as molecular sliding between collagen molecules within the fibril or the effect of relaxation of larger volumes of solvent. Based on our molecular modeling results we propose a simple structural model that describes collagen tissue as a hierarchical structure, providing a bottom-up description of elastic and viscous properties form the properties of the tissue basic building blocks.