RESUMEN
The potential of a manganite ferromagnetic insulator in the field of spin-filtering has been demonstrated. For this, an ultrathin film of Sm0.75Sr0.25MnO3 is integrated as a barrier in an epitaxial oxide nanopillar tunnel junction and a high spin polarization of up to 75% at 5 K has been achieved. A large zero-bias anomaly observed in the dynamic conductance at low temperatures is explained in terms of the Kondo scattering model. In addition, a decrease in spin polarization at low bias and hysteretic magneto-resistance at low temperatures are reported. The results open up new possibilities for spin-electronics and suggest exploration of other manganites-based materials for the room temperature spin-filter applications.
RESUMEN
Dipole alignment in ferroelectric polymers is routinely exploited for applications in charge-based applications. Here, we present the first experimental realization of ideally ordered dipole alignment in α-phase nylon-11 nanowires. This is an unprecedented discovery as dipole alignment is typically only ever achieved in ferroelectric polymers using an applied electric field, whereas here, we achieve dipole alignment in as-fabricated nanowires of 'non-ferroelectric' α-phase nylon-11, an overlooked polymorph of nylon proposed 30 years ago but never practically realized. We show that the strong hydrogen bonding in α-phase nylon-11 serves to enhance the molecular ordering, resulting in exceptional intensity and thermal stability of surface potential. This discovery has profound implications for the field of triboelectric energy harvesting, as the presence of an enhanced surface potential leads to higher mechanical energy harvesting performance. Our approach therefore paves the way towards achieving robust, high-performance mechanical energy harvesters based on this unusual ordered phase of nylon-11.
RESUMEN
The phase designated gamma-Zn3(VO4)2 reported as a minor second phase in zinc oxide-based varistor materials doped with vanadium oxide and manganese oxide is shown to be the L phase, (Zn(1-x)Mn(x))2V2O7 (0.188 < x < 0.538), in the pseudo-binary Mn2V2O7-Zn2V2O7 system. Analysis of X-ray powder diffraction patterns and electron diffraction patterns of this phase shows that the previously published a, c and beta values for this thortveitite-related phase are incorrect. Instead, Rietveld refinement of the X-ray powder pattern of the L phase shows that it has a monoclinic C lattice with Z = 6, with a = 10.3791 (1), b = 8.5557 (1), c = 9.3539 (1) A and beta = 98.467 (1) degrees. Although prior convergent-beam electron diffraction work of 'gamma-Zn3(VO4)2' confirmed the C Bravais lattice, the space group was found to be Cm rather than C2/m, the difference perhaps arising from the inability of the X-rays to detect small displacements of oxygen. Attempts to refine the structure in Cm did not produce improved R factors. The relationship between the crystal structure of the L phase and the high-temperature C2/m beta'-Zn2V2O7 thortveitite-type solid solution is discussed.
RESUMEN
Electric field control of magnetism is a critical future technology for low-power, ultrahigh density memory. However, despite intensive research efforts, no practical material systems have emerged. Interface-coupled, composite systems containing ferroelectric and ferri-/ferromagnetic elements have been widely explored, but they have a range of problems, for example, substrate clamping, large leakage, and inability to miniaturize. In this work, through careful material selection, design, and nanoengineering, a high-performance room-temperature magnetoelectric system is demonstrated. The clamping problem is overcome by using a vertically aligned nanocomposite structure in which the strain coupling is independent of the substrate. To overcome the leakage problem, three key novel advances are introduced: a low leakage ferroelectric, Na0.5Bi0.5TiO3; ferroelectric-ferrimagnetic vertical interfaces which are not conducting; and current blockage via a rectifying interface between the film and the Nb-doped SrTiO3 substrate. The new multiferroic nanocomposite (Na0.5Bi0.5TiO3-CoFe2O4) thin-film system enables, for the first time, large-scale in situ electric field control of magnetic anisotropy at room temperature in a system applicable for magnetoelectric random access memory, with a magnetoelectric coefficient of 1.25 × 10-9 s m-1.
RESUMEN
High-resolution magnetoelectric imaging is used to demonstrate electrical control of the perpendicular local magnetization associated with 125 nm-wide magnetic stripe domains in 100-nm-thick Ni films. This magnetoelectric coupling is achieved in zero magnetic field using strain from ferroelectric BaTiO3 substrates to control perpendicular anisotropy imposed by the growth stress. These findings may be exploited for perpendicular recording in nanopatterned hybrid media.
RESUMEN
In order to study the fundamental conduction mechanism of LaAlO3/SrTiO3 (LAO/STO) interfaces, heterostructures were modified with a single unit cell interface layer of either an isovalent titanate ATiO3 (A = Ca, Sr, Sn, Ba) or a rare earth modified Sr0.5RE0.5TiO3 (RE = La, Nd, Sm, Dy) between the LAO and the STO. A strong coupling between the lattice strain induced in the LAO layer by the interfacial layers and the sheet carrier density in the STO substrate is observed. The observed crystal distortion of the LAO is large and it is suggested that it couples into the sub-surface STO, causing oxygen octahedral rotation and deformation. We propose that the 'structural reconstruction' which occurs in the STO surface as a result of the stress in the LAO is the enabling trigger for two-dimensional conduction at the LAO/STO interface by locally changing the band structure and releasing trapped carriers.
RESUMEN
Carbon nanotube (CNT) fibers consist of a network of highly oriented carbon nanotube bundles. This paper explores the ingress of liquids into the contiguous internal pores between the bundles using measurements of contact angles and changes in fiber dimensions. The resultant effects on the internal structure of the fiber have been examined by WAXS and SAXS. A series of time-resolved experiments measured the influence of the structural changes on the electrical resistivity of the fiber. All organic liquids tested rapidly wicked into the fiber to fill its internal void structure. The local regions in which the nanotube bundles are aggregated to give a bundle network were broken up by the liquid ingress. For the range of organic penetrants examined, the strength of the effects on structure and electrical resistivity was correlated, not only with the degree to which the liquid reduced the nanotube surface energy, but also with the Hansen affinity parameters. The fact that liquid environments influence the electrical performance of these fibers is of significance if they are to replace copper as power and signal conductors, with added implications regarding the possible ingress of external insulating materials, and possibly also sensing applications.
RESUMEN
Ferroelectric materials are used in applications ranging from energy harvesting to high-power electronic transducers. However, industry-standard ferroelectric materials contain lead, which is toxic and environmentally unfriendly. The preferred alternative, BaTiO(3), is non-toxic and has excellent ferroelectric properties, but its Curie temperature of â¼130 °C is too low to be practical. Strain has been used to enhance the Curie temperature of BaTiO(3) (ref. 4) and SrTiO(3) (ref. 5) films, but only for thicknesses of tens of nanometres, which is not thick enough for many device applications. Here, we increase the Curie temperature of micrometre-thick films of BaTiO(3) to at least 330 °C, and the tetragonal-to-cubic structural transition temperature to beyond 800 °C, by interspersing stiff, self-assembled vertical columns of Sm(2)O(3) throughout the film thickness. The columns, which are 10 nm in diameter, strain the BaTiO(3) matrix by 2.35%, forcing it to maintain its tetragonal structure and resulting in the highest BaTiO(3) transition temperatures so far.
RESUMEN
We report that the La(0.35)Sr(0.65)Ti(1-x)Fe(x)O(3) system forms a solid solution within the composition range 0≤x≤0.5 and a room temperature magnetic semiconductor phase exists at x = 0.20. This system shows an anomalous Hall effect and is ferromagnetic with a large moment per Fe ion. The results show that the strong La doping provides sufficient carriers to the system to maintain carrier-mediated ferromagnetism for low Fe doping. Furthermore, the presence of ferromagnetism within this phase space raises the possibility that the conduction, and hence the magnetism, could be electronically controlled.