Comparative analysis of machine learning algorithms on the microbial strain-specific AMP prediction.

The evolution of drug-resistant pathogenic microbial species is a major global health concern. Naturally occurring, antimicrobial peptides (AMPs) are considered promising candidates to address antibiotic resistance problems. A variety of computational methods have been developed to accurately predict AMPs. The majority of such methods are not microbial strain specific (MSS): they can predict whether a given peptide is active against some microbe, but cannot accurately calculate whether such peptide would be active against a particular MS. Due to insufficient data on most MS, only a few MSS predictive models have been developed so far. To overcome this problem, we developed a novel approach that allows to improve MSS predictive models (MSSPM), based on properties, computed for AMP sequences and characteristics of genomes, computed for target MS. New models can perform predictions of AMPs for MS that do not have data on peptides tested on them. We tested various types of feature engineering as well as different machine learning (ML) algorithms to compare the predictive abilities of resulting models. Among the ML algorithms, Random Forest and AdaBoost performed best. By using genome characteristics as additional features, the performance for all models increased relative to models relying on AMP sequence-based properties only. Our novel MSS AMP predictor is freely accessible as part of DBAASP database resource at http://dbaasp.org/prediction/genome.

DBAASP v3: database of antimicrobial/cytotoxic activity and structure of peptides as a resource for development of new therapeutics.

The Database of Antimicrobial Activity and Structure of Peptides (DBAASP) is an open-access, comprehensive database containing information on amino acid sequences, chemical modifications, 3D structures, bioactivities and toxicities of peptides that possess antimicrobial properties. DBAASP is updated continuously, and at present, version 3.0 (DBAASP v3) contains >15 700 entries (8000 more than the previous version), including >14 500 monomers and nearly 400 homo- and hetero-multimers. Of the monomeric antimicrobial peptides (AMPs), >12 000 are synthetic, about 2700 are ribosomally synthesized, and about 170 are non-ribosomally synthesized. Approximately 3/4 of the entries were added after the initial release of the database in 2014 reflecting the recent sharp increase in interest in AMPs. Despite the increased interest, adoption of peptide antimicrobials in clinical practice is still limited as a consequence of several factors including side effects, problems with bioavailability and high production costs. To assist in developing and optimizing de novo peptides with desired biological activities, DBAASP offers several tools including a sophisticated multifactor analysis of relevant physicochemical properties. Furthermore, DBAASP has implemented a structure modelling pipeline that automates the setup, execution and upload of molecular dynamics (MD) simulations of database peptides. At present, >3200 peptides have been populated with MD trajectories and related analyses that are both viewable within the web browser and available for download. More than 400 DBAASP entries also have links to experimentally determined structures in the Protein Data Bank. DBAASP v3 is freely accessible at http://dbaasp.org.

Comment on: 'Empirical comparison of web-based antimicrobial peptide prediction tools'.

SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Predictive Model of Linear Antimicrobial Peptides Active against Gram-Negative Bacteria.

Antimicrobial peptides (AMPs) have been identified as a potential new class of anti-infectives for drug development. There are a lot of computational methods that try to predict AMPs. Most of them can only predict if a peptide will show any antimicrobial potency, but to the best of our knowledge, there are no tools which can predict antimicrobial potency against particular strains. Here we present a predictive model of linear AMPs being active against particular Gram-negative strains relying on a semi-supervised machine-learning approach with a density-based clustering algorithm. The algorithm can well distinguish peptides active against particular strains from others which may also be active but not against the considered strain. The available AMP prediction tools cannot carry out this task. The prediction tool based on the algorithm suggested herein is available on https://dbaasp.org.

DBAASP v.2: an enhanced database of structure and antimicrobial/cytotoxic activity of natural and synthetic peptides.

Antimicrobial peptides (AMPs) are anti-infectives that may represent a novel and untapped class of biotherapeutics. Increasing interest in AMPs means that new peptides (natural and synthetic) are discovered faster than ever before. We describe herein a new version of the Database of Antimicrobial Activity and Structure of Peptides (DBAASPv.2, which is freely accessible at http://dbaasp.org). This iteration of the database reports chemical structures and empirically-determined activities (MICs, IC50, etc.) against more than 4200 specific target microbes for more than 2000 ribosomal, 80 non-ribosomal and 5700 synthetic peptides. Of these, the vast majority are monomeric, but nearly 200 of these peptides are found as homo- or heterodimers. More than 6100 of the peptides are linear, but about 515 are cyclic and more than 1300 have other intra-chain covalent bonds. More than half of the entries in the database were added after the resource was initially described, which reflects the recent sharp uptick of interest in AMPs. New features of DBAASPv.2 include: (i) user-friendly utilities and reporting functions, (ii) a 'Ranking Search' function to query the database by target species and return a ranked list of peptides with activity against that target and (iii) structural descriptions of the peptides derived from empirical data or calculated by molecular dynamics (MD) simulations. The three-dimensional structural data are critical components for understanding structure-activity relationships and for design of new antimicrobial drugs. We created more than 300 high-throughput MD simulations specifically for inclusion in DBAASP. The resulting structures are described in the database by novel trajectory analysis plots and movies. Another 200+ DBAASP entries have links to the Protein DataBank. All of the structures are easily visualized directly in the web browser.

Prediction of linear cationic antimicrobial peptides based on characteristics responsible for their interaction with the membranes.

Most available antimicrobial peptides (AMP) prediction methods use common approach for different classes of AMP. Contrary to available approaches, we suggest that a strategy of prediction should be based on the fact that there are several kinds of AMP that vary in mechanisms of action, structure, mode of interaction with membrane, etc. According to our suggestion for each kind of AMP, a particular approach has to be developed in order to get high efficacy. Consequently, in this paper, a particular but the biggest class of AMP, linear cationic antimicrobial peptides (LCAP), has been considered and a newly developed simple method of LCAP prediction described. The aim of this study is the development of a simple method of discrimination of AMP from non-AMP, the efficiency of which will be determined by efficiencies of selected descriptors only and comparison the results of the discrimination procedure with the results obtained by more complicated discriminative methods. As descriptors the physicochemical characteristics responsible for capability of the peptide to interact with an anionic membrane were considered. The following characteristics such as hydrophobicity, amphiphaticity, location of the peptide in relation to membrane, charge density, propensities to disordered structure and aggregation were studied. On the basis of these characteristics, a new simple algorithm of prediction is developed and evaluation of efficacies of the characteristics as descriptors performed. The results show that three descriptors, hydrophobic moment, charge density and location of the peptide along the membranes, can be used as discriminators of LCAPs. For the training set, our method gives the same level of accuracy as more complicated machine learning approaches offered as CAMP database service tools. For the test set accuracy obtained by our method gives even higher value than the one obtained by CAMP prediction tools. The AMP prediction tool based on the considered method is available at http://www.biomedicine.org.ge/dbaasp/.

Evaluation of the synergistic potential and mechanisms of action for de novo designed cationic antimicrobial peptides.

Antimicrobial peptides (AMPs) have emerged as promising candidates in combating antimicrobial resistance - a growing issue in healthcare. However, to develop AMPs into effective therapeutics, a thorough analysis and extensive investigations are essential. In this study, we employed an in silico approach to design cationic AMPs de novo, followed by their experimental testing. The antibacterial potential of de novo designed cationic AMPs, along with their synergistic properties in combination with conventional antibiotics was examined. Furthermore, the effects of bacterial inoculum density and metabolic state on the antibacterial activity of AMPs were evaluated. Finally, the impact of several potent AMPs on E. coli cell envelope and genomic DNA integrity was determined. Collectively, this comprehensive analysis provides insights into the unique characteristics of cationic AMPs.

Analysis, Modeling, and Target-Specific Predictions of Linear Peptides Inhibiting Virus Entry.

Antiviral peptides (AVPs) are bioactive peptides that exhibit the inhibitory activity against viruses through a range of mechanisms. Virus entry inhibitory peptides (VEIPs) make up a specific class of AVPs that can prevent envelope viruses from entering cells. With the growing number of experimentally verified VEIPs, there is an opportunity to use machine learning to predict peptides that inhibit the virus entry. In this paper, we have developed the first target-specific prediction model for the identification of new VEIPs using, along with the peptide sequence characteristics, the attributes of the envelope proteins of the target virus, which overcomes the problem of insufficient data for particular viral strains and improves the predictive ability. The model's performance was evaluated through 10 repeats of 10-fold cross-validation on the training data set, and the results indicate that it can predict VEIPs with 87.33% accuracy and Matthews correlation coefficient (MCC) value of 0.76. The model also performs well on an independent test set with 90.91% accuracy and MCC of 0.81. We have also developed an automatic computational tool that predicts VEIPs, which is freely available at https://dbaasp.org/tools?page=linear-amp-prediction.

Physicochemical Features and Peculiarities of Interaction of AMP with the Membrane.

Antimicrobial peptides (AMPs) are anti-infectives that have the potential to be used as a novel and untapped class of biotherapeutics. Modes of action of antimicrobial peptides include interaction with the cell envelope (cell wall, outer- and inner-membrane). A comprehensive understanding of the peculiarities of interaction of antimicrobial peptides with the cell envelope is necessary to perform a rational design of new biotherapeutics, against which working out resistance is hard for microbes. In order to enable de novo design with low cost and high throughput, in silico predictive models have to be invoked. To develop an efficient predictive model, a comprehensive understanding of the sequence-to-function relationship is required. This knowledge will allow us to encode amino acid sequences expressively and to adequately choose the accurate AMP classifier. A shared protective layer of microbial cells is the inner, plasmatic membrane. The interaction of AMP with a biological membrane (native and/or artificial) has been comprehensively studied. We provide a review of mechanisms and results of interactions of AMP with the cell membrane, relying on the survey of physicochemical, aggregative, and structural features of AMPs. The potency and mechanism of AMP action are presented in terms of amino acid compositions and distributions of the polar and apolar residues along the chain, that is, in terms of the physicochemical features of peptides such as hydrophobicity, hydrophilicity, and amphiphilicity. The survey of current data highlights topics that should be taken into account to come up with a comprehensive explanation of the mechanisms of action of AMP and to uncover the physicochemical faces of peptides, essential to perform their function. Many different approaches have been used to classify AMPs, including machine learning. The survey of knowledge on sequences, structures, and modes of actions of AMP allows concluding that only possessing comprehensive information on physicochemical features of AMPs enables us to develop accurate classifiers and create effective methods of prediction. Consequently, this knowledge is necessary for the development of design tools for peptide-based antibiotics.

Development of Multiplex PCR Coupled DNA Chip Technology for Assessment of Endogenous and Exogenous Allergens in GM Soybean.

Allergenicity assessment of transgenic plants and foods is important for food safety, labeling regulations, and health protection. The aim of this study was to develop an effective multi-allergen diagnostic approach for transgenic soybean assessment. For this purpose, multiplex polymerase chain reaction (PCR) coupled with DNA chip technology was employed. The study was focused on the herbicide-resistant Roundup Ready soya (RRS) using a set of certified reference materials consisting of 0, 0.1%, 0.5%, and 10% RRS. Technically, the procedure included design of PCR primers and probes; genomic DNA extraction; development of uniplex and multiplex PCR systems; DNA analysis by agarose gel electrophoresis; microarray development, hybridization, and scanning. The use of the asymmetric multiplex PCR method is shown to be very efficient for DNA hybridization with biochip probes. We demonstrate that newly developed fourplex PCR methods coupled with DNA-biochips enable simultaneous identification of three major endogenous allergens, namely, Gly m Bd 28K, Gly m Bd 30K, and lectin, as well as exogenous 5-enolppyruvyl shikimate-phosphate synthase (epsps) expressed in herbicide-resistant roundup ready GMOs. The approach developed in this study can be used for accurate, cheap, and fast testing of food allergens.

De Novo Design and In Vitro Testing of Antimicrobial Peptides against Gram-Negative Bacteria.

Antimicrobial peptides (AMPs) have been identified as a potentially new class of antibiotics to combat bacterial resistance to conventional drugs. The design of de novo AMPs with high therapeutic indexes, low cost of synthesis, high resistance to proteases and high bioavailability remains a challenge. Such design requires computational modeling of antimicrobial properties. Currently, most computational methods cannot accurately calculate antimicrobial potency against particular strains of bacterial pathogens. We developed a tool for AMP prediction (Special Prediction (SP) tool) and made it available on our Web site (https://dbaasp.org/prediction). Based on this tool, a simple algorithm for the design of de novo AMPs (DSP) was created. We used DSP to design short peptides with high therapeutic indexes against gram-negative bacteria. The predicted peptides have been synthesized and tested in vitro against a panel of gram-negative bacteria, including drug resistant ones. Predicted activity against Escherichia coli ATCC 25922 was experimentally confirmed for 14 out of 15 peptides. Further improvements for designed peptides included the synthesis of D-enantiomers, which are traditionally used to increase resistance against proteases. One synthetic D-peptide (SP15D) possesses one of the lowest values of minimum inhibitory concentration (MIC) among all DBAASP database short peptides at the time of the submission of this article, while being highly stable against proteases and having a high therapeutic index. The mode of anti-bacterial action, assessed by fluorescence microscopy, shows that SP15D acts similarly to cell penetrating peptides. SP15D can be considered a promising candidate for the development of peptide antibiotics. We plan further exploratory studies with the SP tool, aiming at finding peptides which are active against other pathogenic organisms.

Comparison of the efficiency of evolutionary change-based and side chain orientation-based fold recognition potentials.

The present article describes residue level knowledge based potential SORDIS. SORDIS incorporates the information on side-chain orientation in relation to hydrophobic core centres, distance of residue from the globule centre and secondary structure. SORDIS has been tested and compared with widespread evolutionary change-based substitution matrices (BLOSUM, PAM, GONNET, Johnson-Overington, BLAJ, HSDM, and STROMA) in fold recognition experiments within the zone of weak sequence similarity (<16%). The obtained results show that the lower is the amino acid similarity between homologous pairs the higher is the performance of SORDIS in comparison with the potentials, based on the information about the evolutionary changes. Therefore, we propose that the employment of SORDIS in fold recognition can be useful.

New multiplex PCR methods for rapid screening of genetically modified organisms in foods.

We present novel multiplex PCR methods for rapid and reliable screening of genetically modified organisms (GMOs). New designed PCR primers targeting four frequently used GMO specific sequences permitted identification of new DNA markers, in particular 141 bp fragment of cauliflower mosaic virus (CaMV) 35S promoter, 224 bp fragment of Agrobacterium tumefaciens nopaline synthase (NOS) terminator, 256 bp fragment of 5-enolppyruvylshikimate-phosphate synthase (epsps) gene and 258 bp fragment of Cry1Ab delta-endotoxin (cry1Ab) gene for GMO screening. The certified reference materials containing Roundup Ready soybean (RRS) and maize MON 810 were applied for the development and optimization of uniplex and multiplex PCR systems. Evaluation of amplification products by agarose gel electrophoresis using negative and positive controls confirmed high specificity and sensitivity at 0.1% GMO for both RRS and MON 810. The fourplex PCR was developed and optimized that allows simultaneous detection of three common transgenic elements, such as: CaMV 35S promoter, NOS terminator, epsps gene together with soybean-specific lectin gene. The triplex PCR developed enables simultaneous identification of transgenic elements, such as: 35S promoter and cry1Ab gene together with maize zein gene. The analysis of different processed foods demonstrated that multiplex PCR methods developed in this study are useful for accurate and fast screening of GM food products.

DBAASP: database of antimicrobial activity and structure of peptides.

The Database of Antimicrobial Activity and Structure of Peptides (DBAASP) is a manually curated database for those peptides for which antimicrobial activity against particular targets has been evaluated experimentally. The database is a depository of complete information on: the chemical structure of peptides; target species; target object of cell; peptide antimicrobial/haemolytic/cytotoxic activities; and experimental conditions at which activities were estimated. The DBAASP search page allows the user to search peptides according to their structural characteristics, complexity type (monomer, dimer and two-peptide), source, synthesis type (ribosomal, nonribosomal and synthetic) and target species. The database prediction algorithm provides a tool for rational design of new antimicrobial peptides. DBAASP is accessible at http://www.biomedicine.org.ge/dbaasp/.

CONTSOR--a new knowledge-based fold recognition potential, based on side chain orientation and contacts between residue terminal groups.

Recognizing the structural similarity without significant sequence identity (fold recognition) is an effective method for protein structure prediction. Previously, we developed a fold recognition potential called SORDIS, which incorporated side chain orientation in relation to hydrophobic core centers, distance of the residues from the protein globule center and secondary structure terms. But this potential does not include terms, based on close contacts between residues. In this paper a new fold recognition potential CONTSOR was presented, which based on SORDIS terms and the term, based on contacts between amino acid terminal groups. The performance of this potential was evaluated on SABmark benchmark for alignment accuracy and on SABmark and Lindahl benchmarks for fold recognition. The results show that CONTSOR has the best performance among other potentials on SABmark benchmark both for alignment accuracy and fold recognition and one of the best performances on Lindahl benchmark. CONTSOR software package is available for download at http://www.lifescience.org.ge/downloads/contsor.zip.

Evaluation performance of substitution matrices, based on contacts between residue terminal groups.

Sequence alignment is a standard method for the estimation of the evolutionary, structural, and functional relationships among amino acid sequences. The quality of alignments depends on the used similarity matrix. Statistical contact potentials (CPs) contain information on contact propensities among residues in native protein structures. Substitution matrices (SMs) based on CPs are applicable for the comparison of distantly related sequences. Here, contact between amino acids was estimated on the basis of the evaluation of the distances between side-chain terminal groups (SCTGs), which are defined as the group of the side-chain heavy atoms with fixed distances between them. In this paper, two new types of CPs and similarity matrices have been constructed: one based on fixed cutoff distance obtained from geometric characteristics of the SCTGs (TGC1), while the other is distance-dependent potential (TGC2). These matrices are compared with other popular SMs. The performance of the matrices was evaluated by comparing sequence with structural alignments. The obtained results show that TGC2 has the best performance among contact-based matrices, but on the whole, contact-based matrices have slightly lower performance than other SMs except fold-level similarity.

ALIGN_MTX--an optimal pairwise textual sequence alignment program, adapted for using in sequence-structure alignment.

The presented program ALIGN_MTX makes alignment of two textual sequences with an opportunity to use any several characters for the designation of sequence elements and arbitrary user substitution matrices. It can be used not only for the alignment of amino acid and nucleotide sequences but also for sequence-structure alignment used in threading, amino acid sequence alignment, using preliminary known PSSM matrix, and in other cases when alignment of biological or non-biological textual sequences is required. This distinguishes it from the majority of similar alignment programs that make, as a rule, alignment only of amino acid or nucleotide sequences represented as a sequence of single alphabetic characters. ALIGN_MTX is presented as downloadable zip archive at http://www.imbbp.org/software/ALIGN_MTX/ and available for free use. As application of using the program, the results of comparison of different types of substitution matrix for alignment quality in distantly related protein pair sets were presented. Threading matrix SORDIS, based on side-chain orientation in relation to hydrophobic core centers with evolutionary change-based substitution matrix BLOSUM and using multiple sequence alignment information position-specific score matrices (PSSM) were taken for test alignment accuracy. The best performance shows PSSM matrix, but in the reduced set with lower sequence similarity threading matrix SORDIS shows the same performance and it was shown that combined potential with SORDIS and PSSM can improve alignment quality in evolutionary distantly related protein pairs.