RESUMEN
The membranes of a Membrane Aerated Biofilm Reactor (MABR) function as bubble-less air diffusers and bio-carriers. Recent bench-scale experiments reported that the shape of membranes influenced the oxygen transfer and utilization rates, which in turn affected the pollutant removal performance of the MABR. In this study, two pilot-scale MABRs using multi-layer hollow fiber membranes with the relaxation rates of 0.1-1.8% (MABR 1) and 1.0-2.8% (MABR 2) were used for the treatment of organics and nitrogen in real medium-strength domestic wastewater. Higher-relaxation-rate membranes have loose and more curved fiber bunch that may allow biofilm to grow more easily and let air diffuse more efficiently. MABR 2 had achieved better performance than MABR 1 at 12- and 6-h Hydraulic Retention Time (HRT), with respectively 0.7-4.3%, 17.7-18.1%, and 5.5-9.0% higher removal efficiencies for Chemical Oxygen Demand (COD), Ammonia Nitrogen (NH4+), and Total Nitrogen (TN). The highest COD, NH4+, and TN removal efficiencies were 94.7%, 81.1%, and 57.1%, respectively, at 12 h HRT in MABR 2. The addition of Polyvinyl Alcohol (PVA) gel beads carrying denitrifying bacteria had enhanced the denitrification in both the reactors. Increments of 5.0-9.0% and 6.6-12.3% were reported for TN removal efficiencies of MABR 1 and 2 combined with PVA gel, sequentially.
Asunto(s)
Eliminación de Residuos Líquidos , Aguas Residuales , Biopelículas , Reactores Biológicos/microbiología , NitrógenoRESUMEN
The ongoing fourth industrial revolution, Industry 4.0 (I4.0), is transforming various industries across the globe. At the same time, resource scarcity with high consumption rates has led to the development of the circular economy. Both concepts advocate for sustainable growth and waste minimization. In developing countries, the integrated solid waste management framework is undergoing modification under I4.0 and the circular economy. Urban local bodies are often unable to measure the readiness of their waste management systems to transform under I4.0 and the circular economy. Here the novel concept of Waste 4.0 is developed. 'Waste 4.0' is a readiness assessment tool to promote the comprehensive transformation of municipal solid waste management under I4.0 and circular economy. This tool has eight determinants for assessing the municipal solid waste management of urban local bodies. To validate Waste 4.0 the urban local bodies of Indore and Sagar, India were used as case studies. The readiness index for I4.0 in the municipal solid waste management system in Indore and Sagar was 0.72 and 0.14, respectively. The readiness index for circular economy focus in Indore and Sagar was 0.65 and 0.13, respectively. The Indore urban local body was classified as an 'Experienced' player for I4.0 Intervention and a 'circular economy fast adopter' for circular economy focus under I4.0 readiness. The Sagar urban local body was classified as a 'Hesitator' player for I4.0 Intervention and achieved the 'Business as usual' tag for circular economy focus under I4.0 readiness. With the Waste 4.0 assessment results urban local bodies can better plan and thus transform their municipal solid waste management systems under I4.0 and the circular economy.
Asunto(s)
Eliminación de Residuos , Administración de Residuos , Industrias , Residuos Sólidos/análisis , TecnologíaRESUMEN
The policies and technological drivers to manage food waste in Asia have been shaped by the increasing awareness of the countries to this issue, their commitment to national and international development goals, their socio-economic constraints, and their recognition of the potency to recover nutrients and energy from food waste. The concept of reduce, reuse and recycle (the 3R principles) streamline the existing food waste management policies, and scrutinising the gaps and challenges led to a conclusion that most of the countries emphasise food waste segregation and treatment instead of prevention at source itself. Furthermore, a qualitative SWOT analysis of five prevailing treatment options led to a conclusion that animal feeding, incineration, and landfilling are unsustainable since they pose various health and environmental hazard risks. It was further concluded that anaerobic digestion was the preferred option than aerobic digestion (composting) considering the characteristics of the available food waste in Asia as well as the underlying environmental and economic benefits. Moreover, decentralised, community-scale, anaerobic digestion system has been gaining traction over centralised, large-scale system because of their lower energy footprint, ease of operation, need for lesser resources, lower operation and maintenance costs, and higher chances of public acceptance. It was also observed that the policy to gain energy from segregated food waste is a larger driving force for the efforts to promote anaerobic digestion and thereby manage food waste sustainably.
Asunto(s)
Eliminación de Residuos , Administración de Residuos , Alimentación Animal , Animales , Asia , Alimentos , Incineración , ReciclajeRESUMEN
Anaerobic digestion has emerged as the preferred treatment for organic fraction of municipal solid waste. Digestate management strategies are devised not only for safe disposal but also to increase the value and marketability. Regulations and standards for digestate management are framed to address the pollution concerns, conserve vulnerable zones, prevent communicable diseases, and to educate on digestate storage and applications. Regulations and the desired end uses are the main drivers for the enhancement of digestate through pretreatment, in vessel cleaning, and post-digestion treatment technologies for solid and liquid fractions of digestate. The current management practice involves utilization of digestate for land application either as fertilizer or soil improver. Prospects are bright for alternative usage such as microalgal cultivation, biofuel and bioethanol production. Presently, the focus of optimization of the anaerobic digestion process is directed only towards enhancing biogas yield, ignoring the quality of digestate produced. A paradigm shift is needed in the approach from 'biogas optimization' to 'integrated biogas-digestate optimization'.
Asunto(s)
Eliminación de Residuos , Residuos Sólidos , Anaerobiosis , Biocombustibles , Fertilizantes , SueloRESUMEN
Hard lignocellulosic structure of wheat straw is the main hindrance in its anaerobic digestion. Thus, a laboratory scale batch experiment was conducted to study the effect of thermal pretreatment on anaerobic digestion of wheat straw. For this purpose, different thermal pretreatment temperatures of 120, 140, 160 and 180⯰C were studied and the results were compared with raw wheat straw. Significant differences in biogas production were observed at temperature higher than 160⯰C. Highest biogas yield of 615 Nml/gVS and volatile solids reduction of 69% was observed from wheat straw pretreated at 180⯰C. Wheat straw pretreated at 180⯰C showed 53% higher biogas yield as compared to untreated. Further, FTIR analysis revealed change in chemical bonds of lignocellulosic structure of wheat straw. Modified Gompertz model was best fitted on biogas production data and predicted shorter lag phase time and higher biogas production as the pretreatment temperature increased. Overall, change in lignocellulosic structure and increase in cellulose content were the main reason in enhancing biogas production.
Asunto(s)
Biocombustibles , Triticum , Anaerobiosis , Cinética , Metano , PoaceaeRESUMEN
Increasing urbanisation and automobile use have given rise to an increase in global tyre waste generation. A tyre becomes waste once it wears out and is no longer fit for its original purpose, and is thus in its end-of-life state. Unlike in developed countries, where waste tyre management has already become a significant issue, it is rarely a priority waste stream in developing countries. Hence, a large quantity of waste tyres ends up either in the open environment or in landfill. In Thailand, waste tyre management is in its infancy, with increased tyre production and wider use of vehicles, but low levels of recycling, leaving scope for more appropriate policies, plans and strategies to increase waste tyre recycling. This article describes the journey of waste tyres in Thailand in terms of recycling and recovery, and disposal. Material flow analysis was used as a tool to quantify the flows and accumulation of waste tyres in Thailand in 2012. The study revealed that, in Thailand in 2012, waste tyre management was still biased towards destructive technologies (48.9%), rather than material recovery involving rubber reclamation, retreading tyres and whole and shredded tyre applications (6.7%). Despite having both economic and environmental benefits, 44.4% of used tyres in 2012 were dumped in the open environment, and the remaining 0.05% in landfills.
Asunto(s)
Reciclaje , Eliminación de Residuos/métodos , Goma , Reciclaje/estadística & datos numéricos , Eliminación de Residuos/estadística & datos numéricos , TailandiaRESUMEN
Domestic wastewater treatment plants (WWTPs) play a vital role in limiting the release of microplastics (MP) into the environment. This study examined MP removal efficiency from five centralized and four decentralized domestic WWTPs in Bangkok, Thailand. MP concentrations in wastewater and sludge were comparable between centralized and decentralized WWTPs, despite these decentralized WWTPs serving smaller populations and having limited treatment capacity. The elimination of MPs ranged from 50 to 96.8% in centralized WWTPs and 14.2-53.6% in decentralized WWTPs. It is noted that the retained MPs concentrations in sludge ranged from 20,000 to 228,100 MP/kg dry weight. The prevalence of synthetic fibers and fragments could be attributed to their pathways from laundry or car tires, and the accidental release of a variety of plastic wastes ended up in investigated domestic WWTPs. Removal of MPs between the centralized and decentralized WWTPs was influenced by several impact factors including initial MP concentrations, longer retention times, MP fragmentation, and variations of MP concentrations in sludge leading to different activated sludge process configurations. Sewage sludge has become a primary location for the accumulation of incoming microplastics in WWTPs. The MPs entering and leaving each unit process were varied due to the unique characteristics of MPs, and their different treatment efficiencies. While the extended hydraulic retention period in decentralized WWTPs decreased the MP removal efficacy, the centralized WWTP with the two-stage activated sludge process achieved the highest MP removal efficiency.
Asunto(s)
Microplásticos , Aguas del Alcantarillado , Eliminación de Residuos Líquidos , Aguas Residuales , Contaminantes Químicos del Agua , Aguas del Alcantarillado/química , Aguas Residuales/química , Microplásticos/análisis , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/análisis , Tailandia , Monitoreo del Ambiente , Plásticos/análisisRESUMEN
Due to global demand, millions of tons of plastics have been widely consumed, resulting in the widespread entry of vast amounts of microplastic particles into the environment. The presence of microplastics (MPs) in water supplies, including bottled water, has undergone systematic review, assessing the potential impacts of MPs on humans through exposure assessment. The main challenges associated with current technologies lie in their ability to effectively treat and completely remove MPs from drinking and supply water. While the risks posed by MPs upon entering the human body have not yet been fully revealed, there is a predicted certainty of negative impacts. This review encompasses a range of current technologies, spanning from basic to advanced treatments and varying in scale. However, given the frequent detection of MPs in drinking and bottled water, it becomes imperative to implement comprehensive management strategies to address this issue effectively. Consequently, integrating current technologies with management options such as life-cycle assessment, circular economy principles, and machine learning is crucial to eliminating this pervasive problem.
Asunto(s)
Microplásticos , Contaminantes Químicos del Agua , Purificación del Agua , Abastecimiento de Agua , Microplásticos/análisis , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Monitoreo del Ambiente/métodos , Agua Potable/química , Plásticos/análisisRESUMEN
A laboratory scale air membrane bioreactor (aMBR) was used to treat a gas-phase mixture of methanol (MeOH) and acetonitrile (ACN), with an inoculum comprising of a mixed culture of microorganisms. The aMBR was tested under both steady-state and transient modes, with inlet concentrations ranging from 1 to 50 g/m3 for both compounds. Under steady-state conditions, the aMBR was operated at various empty bed residence times (EBRT) and MeOH:ACN ratios, while intermittent shutdown was tested during transient-state operations. The results showed that, the aMBR demonstrated > 80% removal efficiencies for both MeOH and ACN. An EBRT of 30 s was found to be the best treatment time for the mixture, providing>98% removal, with<20 mg/L of the pollutant accumulation in the liquid-phase. The microorganisms also showed preferential utilization of ACN compared to MeOH from the gas-phase and good resilience capacity after three days of shutdown/re-start operation.
Asunto(s)
Contaminantes Atmosféricos , Metanol , Gases , Contaminantes Atmosféricos/análisis , Reactores Biológicos , Acetonitrilos , Filtración/métodos , Biodegradación AmbientalRESUMEN
Recycling plastics is a good alternative to manage the plastic waste generated in Pakistan. Unfortunately, the country lacks efficient system to manage or recycle the plastic waste it generates. Lack of government support, absence of standard operating procedures, negligence towards health and safety of workers, increasing costs of raw materials and poor quality of the recyclates are some of the issues currently faced by plastic recyclers in Pakistan. Considering the need of cleaner production audits in plastic recycling industries, this study was carried out to establish an initial reference benchmark. Production processes in 10 recycling industries were evaluated from cleaner production perspective. The study showed the average water consumption of a recycling industry as high as 3315 L/ton. All the consumed water is wasted in the nearby community sewer while, only 3 recyclers recycled between 70 and 75% of the treated wastewater. In addition, a recycling facility, on an average, consumed 172.5 kWh of power for processing 1 ton of plastic waste. The average temperature was observed to be 36.5 °C and noise levels exceeded the permissible limits. Moreover, the industry is male-dominated, workers are mostly underpaid and have no access to good healthcare facilities. Recyclers lack standardization and have no national guidelines to follow. Guidelines and standardization of recycling process, wastewater treatment, use of renewable energy, water reuse etc, are direly needed for uplifting this sector and reducing its impacts on the environment.
Asunto(s)
Plásticos , Administración de Residuos , Humanos , Masculino , Pakistán , Industrias , Temperatura , Reciclaje , AguaRESUMEN
Membrane-aerated biofilm reactors (MABRs) have aroused increasing attention due to their excellent performance in treating wastewater, where the membranes behave as bio-carriers for microorganisms and bubbleless air diffusers. The MABR technology has not been fully commercialized due to reactor design and low total nitrogen (TN) removal efficiency at short hydraulic retention times (HRT). In this study, a hybrid system of MABR 1 integrated with an anoxic nano-biotechnological reactor filled with Granulated Nanoscale Oxyhydroxides of Fe (GNOF) media was evaluated to assess the improvement in nitrogen removal performance at 12, 10, and 4 h of HRTs. At the same time, another MABR (MABR 2) was operated individually at 12, 10, 8, 6, 4, and 2 h of HRTs to assess the influence of HRT on nitrogen removal performance. An enhancement in removal performance was reported in the hybrid MABR-GNOF, achieving the highest removal efficiencies of 74.3 ± 3.1% for ammonium nitrogen (NH4+-N), 69.8 ± 2.1% for total nitrogen (TN), and 90.9 ± 1.7% for chemical oxygen demand (COD), at 12 h HRT. The hybrid MABR-GNOF system attained 18% higher nitrogen removal than the MABR-only system at 12 h of HRT. A simultaneous anoxic nitrification-denitrification and COD oxidation might be developed for the removal of COD, NH4+-N, and TN from domestic wastewater by using GNOF as an electron acceptor in the hybrid MABR-GNOF unit. The findings in this study confirmed the possibility of integration of GNOF and MABR on a pilot scale and are promising for the application of this hybrid system on a full scale.
Asunto(s)
Aguas Residuales , Purificación del Agua , Reactores Biológicos , Biotecnología , Nitrificación , Biopelículas , Nitrógeno , Eliminación de Residuos Líquidos , DesnitrificaciónRESUMEN
This study is aimed to comprehend the treatment of non-submerged attached growth systems using bio-sponge, bio-cord, and bio-cloth media. Three reactors were set up with internal recirculation ratio of 1 (IR = 1) and similar media surface area. Bio-sponge and bio-cloth reactors showed removal of COD (79 vs. 76%) and NH4+-N (78 vs. 73%). While bio-cord treatment was deteriorated due to time-dependent process. Multiple linear regression revealed that alkalinity governed the formation degree of the anaerobic zone in bio-sponges, partially affecting nitrification. Increasing IR from 1 to 3 caused sloughing of the attached biomass and was positively correlated with effluent nitrite nitrogen concentration, indicating the sensitivity of nitrification to spatial distribution effects. In addition, bio-sponge system obtained superior performance at IR of 2 while bio-cloth one might be also an effective media for wastewater treatment if having good durability.
Asunto(s)
Eliminación de Residuos Líquidos , Aguas Residuales , Reactores Biológicos , Nitrificación , Nitrógeno/análisisRESUMEN
Inhibitors that reduce viral nucleic acid extraction efficiency and interfere with cDNA synthesis and/or polymerase activity affect the molecular detection of viruses in aquatic environments. To overcome these significant problems, we developed a methodology for assessing nucleic acid yields and DNA amplification efficiencies for environmental water samples. This involved adding particles of adenovirus type 5 and murine norovirus and newly developed primer-sharing controls, which are amplified with the same primer pairs and result in the same amplicon sizes as the targets, to these samples. We found that nucleic acid loss during the extraction process, rather than reverse transcription-PCR (RT-PCR) inhibition, more significantly attributed to underestimation of the presence of viral genomes in the environmental water samples tested in this study. Our success rate for satisfactorily amplifying viral RNAs and DNAs by RT-PCR was higher than that for obtaining adequate nucleic acid preparations. We found that inhibitory properties were greatest when we used larger sample volumes. A magnetic silica bead-based RNA extraction method effectively removed inhibitors that interfere with viral nucleic acid extraction and RT-PCR. To our knowledge, this is the first study to assess the inhibitory properties of environmental water samples by using both control virus particles and primer-sharing controls.
Asunto(s)
Adenoviridae/genética , ADN Viral/aislamiento & purificación , Norovirus/genética , ARN Viral/aislamiento & purificación , Virología/métodos , Virología/normas , Microbiología del Agua , ADN Viral/genética , Reacción en Cadena de la Polimerasa/métodos , Reacción en Cadena de la Polimerasa/normas , ARN Viral/genética , Estándares de ReferenciaRESUMEN
Membrane bioreactor (MBR) is an advantageous technology for wastewater treatment. However, efficient nutrient removal and membrane fouling mitigation remain major challenges in its applications. In this study, an electroconductive moving bed membrane bioreactor (EcMB-MBR) was proposed for simultaneous removal of organics and nutrients from domestic wastewater. The EcMB-MBR was composed of a submerged MBR, filled with electrodes and free-floating conductive media. Conductive media were introduced to reduce energy consumption in an electrochemical MBR, to improve nitrogen removal, and to mitigate membrane fouling. The results showed that COD, total nitrogen, and total phosphorus removal was up to 97.1 ± 1.4%, 88.8 ± 4.2%, and 99.0 ± 0.9%, respectively, in comparison with those of 93.4 ± 1.5%, 65.2 ± 5.3%, and 20.4 ± 11.3% in a conventional submerged MBR. Meanwhile, a total membrane resistance reduction of 26.7% was obtained in the EcMB-MBR. The optimized operating condition was determined at an intermittent electricity exposure time of 10 min-ON/10 min-OFF, and a direct current density of 15 A/m2. The interactions between electric current and conductive media were explored to understand the working mechanism in this proposed system. The conductive media reduced 21% of the electrical resistivity in the mixed liquor at a selected packing density of 0.20 (v/v). The combination of electrochemical process and conductive media specially enhanced the reduction of nitrate-nitrogen (NO3--N) through hybrid bio-electrochemical denitrification processes. These mechanisms involved with electrochemically assisted autotrophic denitrification by autotrophic denitrifying bacteria. As a result, 5.2% of NO3--N remained in the effluent of EcMB-MBR in comparison with that of 29.5% in the MBR. Membrane fouling was minimized via both mechanical scouring and electrochemical decomposition/precipitation of organic/particulate foulants. Furthermore, a preliminary cost analysis indicated that an additional operating cost of 0.081 USD/m3, accounting for 10 - 30% increment of the operating cost of a conventional MBR, was needed to enhance the nitrogen and phosphorus removal correspondingly in the EcMB-MBR.
Asunto(s)
Membranas Artificiales , Aguas Residuales , Lechos , Reactores Biológicos , Costos y Análisis de Costo , Membranas , Nitrógeno , Eliminación de Residuos LíquidosRESUMEN
Applications of membranes in water and wastewater treatment, desalination, as well as other purification processes, have become more widespread over the past few decades [...].
RESUMEN
Waste activated sludge (WAS) requires a long digestion time because of a rate-limiting hydrolysis step - the first phase of anaerobic digestion. Pretreatment of WAS facilitates the hydrolysis step and improves the digestibility. This study examined the effects of ultrasonic, chemical, and combined chemical-ultrasonic pretreatments on WAS disintegration and its subsequent digestion at different solids retention times (SRTs). The efficient conditions for each pretreatment were evaluated based on per cent soluble chemical oxygen demand (%SCOD). The results showed that the combined chemical-ultrasonic pretreatment resulted in better WAS disintegration, based on %SCOD release, compared with individual chemical and ultrasonic pretreatments. At the optimum operating conditions of the combined chemical-ultrasonic pretreatment (NaOH dose of 10 mg g(-1) TS (total solids) and specific energy input of 3.8 kJ g(-1)TS), the %SCOD release was 18.1% +/- 0.5%, whereas 13.5% +/- 0.9%, 13.0% +/- 0.5% and 1.1% +/- 0.1% corresponded to individual chemical (50 mg g(-1) TS) and ultrasonic (3.8 kJ g(-1) TS) pretreatments and control (without pretreatment), respectively. The anaerobic digestion studies in continuous stirred tank reactors showed an increase in methane production of 23.4% +/- 1.3% and 31.1 +/- 1.2% for digesters fed with WAS pretreated with ultrasonic and combined chemical-ultrasonic, respectively, with respect to controls at the effective SRT of 15 days. The highest total solids removal was achieved in the digester fed with ultrasonic pretreated WAS (16.6% +/- 0.3%), whereas the highest volatile solids removal was achieved from the digester fed with combined chemical-ultrasonic pretreated WAS (24.8 +/- 0.4%). The findings from this study are a useful contribution to new pretreatment techniques in the field of sludge treatment technology through anaerobic digestion.
Asunto(s)
Aguas del Alcantarillado , Ultrasonido , Eliminación de Residuos Líquidos/métodos , Anaerobiosis , Biodegradación Ambiental , Reactores Biológicos , Química/métodos , Diseño de Equipo , Gases , Metano/química , Oxígeno/química , Eliminación de Residuos/métodos , Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Purificación del Agua/métodosRESUMEN
The main aim of this study was to evaluate the performance of an air membrane bioreactor (aMBR) for the treatment of gas-phase methanol. A laboratory-scale hollow fiber aMBR was operated for 150 days, at inlet methanol concentrations varying between 2 and 30 g m-3 and at empty bed residence times (EBRT) of 30, 10 and 5 s. Under steady-state conditions, a maximum methanol removal efficiency (RE) of 98% was obtained at an EBRT of 30 s and a decrease in RE of methanol was observed at lower EBRTs. On increasing the inlet loading rate, some portion of gas-phase MeOH was stripped into the liquid phase due to its solubility in water. Under transient conditions, the MeOH removal efficiency dropped from an average value of 95%-90% after 5 h of 10-fold shock load and dropped from an average value of 95%-88% under 5-fold increase in shock load. During transient-state tests, the aMBR performed well under different upset loading conditions and a drop in RE of â¼ 5-10% was observed. However, the aMBR performance was restored within 1-2 days when pre-shock conditions were restored. The results from microbial structure analysis revealed a big shift of the dominant methanol degrader, from Candida boidinii strain TBRC 217 to Xanthobacter sp. and Fusicolla sp., respectively.
Asunto(s)
Contaminantes Atmosféricos/análisis , Reactores Biológicos/microbiología , Membranas Artificiales , Metanol/análisis , Biodegradación Ambiental , Biopelículas/crecimiento & desarrollo , Candida/crecimiento & desarrollo , Diseño de Equipo , Filtración/métodos , Xanthobacter/crecimiento & desarrolloRESUMEN
Anaerobic treatment processes have achieved popularity in treating palm oil mill effluent due to its high treatability and biogas generation. The use of externally submerged membranes with anaerobic reactors promotes the retention of the biomass in the reactor. This study was conducted in thermophilic conditions with the Polytetrafluoroethylene hollow fiber (PTFE-HF) membrane which was operated at 55 °C. The reactor was operated at Organic Loading Rates (OLR) of 2, 3, 4, 6, 8, and 10 kg Chemical Oxygen Demand (COD)/m3·d to investigate the treatment performance and the membrane operation. The efficiency of the COD removal achieved by the system was between 93-98%. The highest methane yield achieved was 0.56 m3 CH4/kg CODr. The reactor mixed liquor volatile suspended solids (MLVSS) was maintained between 11.1 g/L to 20.9 g/L. A dead-end mode PTFE hollow fiber microfiltration was operated with the constant flux of 3 LMH (L/m2·h) in permeate recirculation mode to separate the clear final effluent and retain the biomass in the reactor. Membrane fouling was one of the limiting factors in the membrane bioreactor application. In this study, organic fouling was observed to be 93% of the total membrane fouling.