High-performance fibre battery with polymer gel electrolyte.

Replacement of liquid electrolytes with polymer gel electrolytes is recognized as a general and effective way of solving safety problems and achieving high flexibility in wearable batteries1-6. However, the poor interface between polymer gel electrolyte and electrode, caused by insufficient wetting, produces much poorer electrochemical properties, especially during the deformation of the battery7-9. Here we report a strategy for designing channel structures in electrodes to incorporate polymer gel electrolytes and to form intimate and stable interfaces for high-performance wearable batteries. As a demonstration, multiple electrode fibres were rotated together to form aligned channels, while the surface of each electrode fibre was designed with networked channels. The monomer solution was effectively infiltrated first along the aligned channels and then into the networked channels. The monomers were then polymerized to produce a gel electrolyte and form intimate and stable interfaces with the electrodes. The resulting fibre lithium-ion battery (FLB) showed high electrochemical performances (for example, an energy density of about 128 Wh kg-1). This strategy also enabled the production of FLBs with a high rate of 3,600 m h-1 per winding unit. The continuous FLBs were woven into a 50 cm × 30 cm textile to provide an output capacity of 2,975 mAh. The FLB textiles worked safely under extreme conditions, such as temperatures of -40 °C and 80 °C and a vacuum of -0.08 MPa. The FLBs show promise for applications in firefighting and space exploration.

A rechargeable calcium-oxygen battery that operates at room temperature.

Calcium-oxygen (Ca-O2) batteries can theoretically afford high capacity by the reduction of O2 to calcium oxide compounds (CaOx) at low cost1-5. Yet, a rechargeable Ca-O2 battery that operates at room temperature has not been achieved because the CaOx/O2 chemistry typically involves inert discharge products and few electrolytes can accommodate both a highly reductive Ca metal anode and O2. Here we report a Ca-O2 battery that is rechargeable for 700 cycles at room temperature. Our battery relies on a highly reversible two-electron redox to form chemically reactive calcium peroxide (CaO2) as the discharge product. Using a durable ionic liquid-based electrolyte, this two-electron reaction is enabled by the facilitated Ca plating-stripping in the Ca metal anode at room temperature and improved CaO2/O2 redox in the air cathode. We show the proposed Ca-O2 battery is stable in air and can be made into flexible fibres that are weaved into textile batteries for next-generation wearable systems.

Most of the photons that reionized the Universe came from dwarf galaxies.

The identification of sources driving cosmic reionization, a major phase transition from neutral hydrogen to ionized plasma around 600-800 Myr after the Big Bang1-3, has been a matter of debate4. Some models suggest that high ionizing emissivity and escape fractions (fesc) from quasars support their role in driving cosmic reionization5,6. Others propose that the high fesc values from bright galaxies generate sufficient ionizing radiation to drive this process7. Finally, a few studies suggest that the number density of faint galaxies, when combined with a stellar-mass-dependent model of ionizing efficiency and fesc, can effectively dominate cosmic reionization8,9. However, so far, comprehensive spectroscopic studies of low-mass galaxies have not been done because of their extreme faintness. Here we report an analysis of eight ultra-faint galaxies (in a very small field) during the epoch of reionization with absolute magnitudes between MUV ≈ -17 mag and -15 mag (down to 0.005L⋆ (refs. 10,11)). We find that faint galaxies during the first thousand million years of the Universe produce ionizing photons with log[ξion (Hz erg-1)] = 25.80 ± 0.14, a factor of 4 higher than commonly assumed values12. If this field is representative of the large-scale distribution of faint galaxies, the rate of ionizing photons exceeds that needed for reionization, even for escape fractions of the order of 5%.

A high black-hole-to-host mass ratio in a lensed AGN in the early Universe.

Early JWST observations have uncovered a population of red sources that might represent a previously overlooked phase of supermassive black hole growth1-3. One of the most intriguing examples is an extremely red, point-like object that was found to be triply imaged by the strong lensing cluster Abell 2744 (ref. 4). Here we present deep JWST/NIRSpec observations of this object, Abell2744-QSO1. The spectroscopy confirms that the three images are of the same object, and that it is a highly reddened (AV ≃ 3) broad emission line active galactic nucleus at a redshift of zspec = 7.0451 ± 0.0005. From the width of Hß (full width at half-maximum = 2,800 ± 250 km s-1), we derive a black hole mass of M BH = 4 - 1 + 2 × 1 0 7 M ⊙ . We infer a very high ratio of black-hole-to-galaxy mass of at least 3%, an order of magnitude more than that seen in local galaxies5 and possibly as high as 100%. The lack of strong metal lines in the spectrum together with the high bolometric luminosity (Lbol = (1.1 ± 0.3) × 1045 erg s-1) indicate that we are seeing the black hole in a phase of rapid growth, accreting at 30% of the Eddington limit. The rapid growth and high black-hole-to-galaxy mass ratio of Abell2744-QSO1 suggest that it may represent the missing link between black hole seeds6 and one of the first luminous quasars7.

A population of red candidate massive galaxies ~600 Myr after the Big Bang.

Galaxies with stellar masses as high as roughly 1011 solar masses have been identified1-3 out to redshifts z of roughly 6, around 1 billion years after the Big Bang. It has been difficult to find massive galaxies at even earlier times, as the Balmer break region, which is needed for accurate mass estimates, is redshifted to wavelengths beyond 2.5 µm. Here we make use of the 1-5 µm coverage of the James Webb Space Telescope early release observations to search for intrinsically red galaxies in the first roughly 750 million years of cosmic history. In the survey area, we find six candidate massive galaxies (stellar mass more than 1010 solar masses) at 7.4 ≤ z ≤ 9.1, 500-700 Myr after the Big Bang, including one galaxy with a possible stellar mass of roughly 1011 solar masses. If verified with spectroscopy, the stellar mass density in massive galaxies would be much higher than anticipated from previous studies on the basis of rest-frame ultraviolet-selected samples.

Scalable production of high-performing woven lithium-ion fibre batteries.

Fibre lithium-ion batteries are attractive as flexible power solutions because they can be woven into textiles, offering a convenient way to power future wearable electronics1-4. However, they are difficult to produce in lengths of more than a few centimetres, and longer fibres were thought to have higher internal resistances3,5 that compromised electrochemical performance6,7. Here we show that the internal resistance of such fibres has a hyperbolic cotangent function relationship with fibre length, where it first decreases before levelling off as length increases. Systematic studies confirm that this unexpected result is true for different fibre batteries. We are able to produce metres of high-performing fibre lithium-ion batteries through an optimized scalable industrial process. Our mass-produced fibre batteries have an energy density of 85.69 watt hour per kilogram (typical values8 are less than 1 watt hour per kilogram), based on the total weight of a lithium cobalt oxide/graphite full battery, including packaging. Its capacity retention reaches 90.5% after 500 charge-discharge cycles and 93% at 1C rate (compared with 0.1C rate capacity), which is comparable to commercial batteries such as pouch cells. Over 80 per cent capacity can be maintained after bending the fibre for 100,000 cycles. We show that fibre lithium-ion batteries woven into safe and washable textiles by industrial rapier loom can wirelessly charge a cell phone or power a health management jacket integrated with fibre sensors and a textile display.

Large-area display textiles integrated with functional systems.

Displays are basic building blocks of modern electronics1,2. Integrating displays into textiles offers exciting opportunities for smart electronic textiles-the ultimate goal of wearable technology, poised to change the way in which we interact with electronic devices3-6. Display textiles serve to bridge human-machine interactions7-9, offering, for instance, a real-time communication tool for individuals with voice or speech difficulties. Electronic textiles capable of communicating10, sensing11,12 and supplying electricity13,14 have been reported previously. However, textiles with functional, large-area displays have not yet been achieved, because it is challenging to obtain small illuminating units that are both durable and easy to assemble over a wide area. Here we report a 6-metre-long, 25-centimetre-wide display textile containing 5 × 105 electroluminescent units spaced approximately 800 micrometres apart. Weaving conductive weft and luminescent warp fibres forms micrometre-scale electroluminescent units at the weft-warp contact points. The brightness between electroluminescent units deviates by less than 8 per cent and remains stable even when the textile is bent, stretched or pressed. Our display textile is flexible and breathable and withstands repeated machine-washing, making it suitable for practical applications. We show that an integrated textile system consisting of display, keyboard and power supply can serve as a communication tool, demonstrating the system's potential within the 'internet of things' in various areas, including healthcare. Our approach unifies the fabrication and function of electronic devices with textiles, and we expect that woven-fibre materials will shape the next generation of electronics.

Multi-modal features-based human-herpesvirus protein-protein interaction prediction by using LightGBM.

The identification of human-herpesvirus protein-protein interactions (PPIs) is an essential and important entry point to understand the mechanisms of viral infection, especially in malignant tumor patients with common herpesvirus infection. While natural language processing (NLP)-based embedding techniques have emerged as powerful approaches, the application of multi-modal embedding feature fusion to predict human-herpesvirus PPIs is still limited. Here, we established a multi-modal embedding feature fusion-based LightGBM method to predict human-herpesvirus PPIs. In particular, we applied document and graph embedding approaches to represent sequence, network and function modal features of human and herpesviral proteins. Training our LightGBM models through our compiled non-rigorous and rigorous benchmarking datasets, we obtained significantly better performance compared to individual-modal features. Furthermore, our model outperformed traditional feature encodings-based machine learning methods and state-of-the-art deep learning-based methods using various benchmarking datasets. In a transfer learning step, we show that our model that was trained on human-herpesvirus PPI dataset without cytomegalovirus data can reliably predict human-cytomegalovirus PPIs, indicating that our method can comprehensively capture multi-modal fusion features of protein interactions across various herpesvirus subtypes. The implementation of our method is available at https://github.com/XiaodiYangpku/MultimodalPPI/.

Large and Pressure-Dependent c-Axis Piezoresistivity of Highly Oriented Pyrolytic Graphite near Zero Pressure.

The c-axis piezoresistivity is a fundamental and important parameter of graphite, but its value near zero pressure has not been well determined. Herein, a new method for studying the c-axis piezoresistivity of van der Waals materials near zero pressure is developed on the basis of in situ scanning electron microscopy and finite element simulation. The c-axis piezoresistivity of microscale highly oriented pyrolytic graphite (HOPG) is found to show a large value of 5.68 × 10-5 kPa-1 near zero pressure and decreases by 2 orders of magnitude to the established value of ∼10-7 kPa-1 when the pressure increases to 200 MPa. By modulating the serial tunneling barrier model on the basis of the stacking faults, we describe the c-axis electrical transport of HOPG under compression. The large c-axis piezoresistivity near zero pressure and its large decrease in magnitude with pressure are attributed to the rapid stiffening of the electromechanical properties under compression.

In vitro activity of meropenem-vaborbactam plus aztreonam against metallo-ß-lactamase-producing Klebsiella pneumoniae.

We evaluated the in vitro activity of meropenem-vaborbactam plus aztreonam (MEV-ATM) against 140 metallo-ß-lactamase (MBL)-producing Klebsiella pneumoniae isolates. Among them, 25 isolates (17.9%) displayed minimum inhibitory concentrations (MIC) ≥ 8 µg/mL, while 112 (80.0%) had MIC ≤ 2 µg/mL. Genomic analysis and subsequent gene cloning experiments revealed OmpK36 134-135GD-insertion and increased carbapenemase gene (blaNDM-1 and blaOXA-48-like) copy numbers are the main factors responsible for MEV-ATM non-susceptibility. Notably, MEV-ATM is actively against aztreonam-avibactam-resistant mutants due to CMY-16 mutations.

TAM-Hijacked Immunoreaction Rescued by Hypoxia-Pathway-Intervened Strategy for Enhanced Metastatic Cancer Immunotherapy.

Immunotherapy is regarded as a prospective strategy against metastatic cancer. However, tumor-associated macrophages (TAMs), which accumulate in hypoxic tumor microenvironment, reduce the effectiveness of immunotherapy by blocking or "hijacking" the initiation of the immune response. Here, a novel tumor-targeted nanoplatform loaded with hypoxia-pathway-intervened docosahexaenoic acid (DHA) and chemotherapeutic drug carfilzomib (CFZ) is developed, which realizes the rescue of TAM-hijacked immune response and effective metastatic cancer immunotherapy. DHA is conjugated to fucoidan (Fuc) via a reduction cleavable selenylsulfide bond (SSe) for micelle preparation, and CFZ is encapsulated in the hydrophobic cores of micelles. The functionalized nanoplatforms (Fuc─SSe─DHA (FSSeD)-CFZs) induce immunogenic cell death, inhibit hypoxia-inducible factor-1α expression, and improve immunosuppression by TAM suppression. FSSeD-CFZs enhance immune response against primary tumor development and metastasis formation. In brief, the novel rescue strategy for TAM-hijacked immunoreaction by inhibiting hypoxia pathway has the potential and clinically translational significance for enhanced metastatic cancer immunotherapy.

Decreased Electrically and Increased Ionically Conducting Scaffolds for Long-Life, High-Rate and Deep-Capacity Lithium-Metal Anodes.

Lithium (Li) metal batteries are deemed as promising next-generation power solutions but are hindered by the uncontrolled dendrite growth and infinite volume change of Li anodes. The extensively studied 3D scaffolds as solutions generally lead to undesired "top-growth" of Li due to their high electrical conductivity and the lack of ion-transporting pathways. Here, by reducing electrical conductivity and increasing the ionic conductivity of the scaffold, the deposition spot of Li to the bottom of the scaffold can be regulated, thus resulting in a safe bottom-up plating mode of the Li and dendrite-free Li deposition. The resulting symmetrical cells with these scaffolds, despite with a limited pre-plated Li capacity of 5 mAh cm-2, exhibit ultra-stable Li plating/stripping for over 1 year (11 000 h) at a high current density of 3 mA cm-2 and a high areal capacity of 3 mAh cm-2. Moreover, the full cells with these scaffolds further demonstrate high cycling stability under challenging conditions, including high cathode loading of 21.6 mg cm-2, low negative-to-positive ratio of 1.6, and limited electrolyte-to-capacity ratio of 4.2 g Ah-1.

Compensation of inner retina to early-stage photoreceptor degeneration in a RhoP23H/+ mouse model of retinitis pigmentosa.

Retinitis pigmentosa (RP) is an inherited retinal disorder characterized by the degeneration of photoreceptors. RhoP23H/+ mice, which carry a Pro23His mutation in the RHODOPSIN (Rho) gene, are one of the most studied animal models for RP. However, except for the photoreceptors, other retinal neural cells have not been fully investigated in this model. Here, we record the temporal changes of the retina by optical coherence tomography (OCT) imaging of the RhoP23H/+ mice, from early to mid-phase of retinal degeneration. Based on thickness analysis, we identified a natural retinal thickness adaption in wild-type mice during early adulthood and observed morphological compensation of the inner retina layer to photoreceptor degeneration in the RhoP23H/+ mice, primarily on the inner nuclear layer (INL). RhoP23H/+ mice findings were further validated via: histology showing the negative correlation of INL and ONL thicknesses; as well as electroretinogram (ERG) showing an increased b-wave to a-wave ratio. These results unravel the sequential morphologic events in this model and suggest a better understanding of retinal degeneration of RP for future studies.

Hemorrhoidal disease among doctors from grade-A tertiary hospitals in big cities of China: results from web-based doctors as patients survey.

BACKGROUND: Doctors are at high risk of developing hemorrhoidal disease (HD), but it is unclear whether doctors are aware of this risk. The OASIS (dOctors AS patIentS) study was performed to examine the prevalence, awareness, diagnosis, and treatment of HD among doctors in big cities in China. METHODS: An online survey consisting of a structured questionnaire was carried out among doctors in grade-A tertiary hospitals in 29 provinces across China from August to October 2020. RESULTS: A total of 1227 questionnaire responses were collected. HD prevalence was 56.8%, with a significant difference between internists and surgeons (P = 0.01). 15.6% of doctors with HD didn't have serious concerns about the recurrence and severity of HD. 91.5% of doctors adopted general treatments, and 83.0% considered oral medications only when topical medications were ineffective. Among the oral medications, Micronized Purified Flavonoid Fraction (MPFF) was most effective based on the scores from three important parameters, but only 17% of doctors received MPFF. CONCLUSIONS: Doctors are at higher risk of developing HD with a high prevalence among Chinese doctors, but they are not fully aware or not concerned about HD. There is a deficiency in treatment recommendations and clinical management of HD even for doctors, including late initiation and inadequate oral drug therapy. Therefore, awareness and standardized treatment of HD should be improved among Chinese doctors, as well as in the general population.

Chloroprocaine antagonizes progression of breast cancer by regulating LINC00494/miR-3619-5p/MED19 axis.

Breast cancer, as the most prevalent female malignancy, leads the cancer-related death in women worldwide. Local anesthetic chloroprocaine exhibits antitumor potential, but its specific functions and underlying molecular mechanisms in breast cancer remain unclear. Here, we demonstrated chloroprocaine significantly inhibited proliferation, invasion and induced apoptosis of breast cancer cells in vitro. Tumor growth and pulmonary metastasis were also suppressed in BABL/c nude mice model with chloroprocaine treatment. LINC00494 was identified as one of the most downregulated long noncoding RNAs in chloroprocaine-treated breast cancer cells by high-throughput sequencing. Futhermore, high level of LINC00494 was positively associated with poor outcome of breast cancer patients. LINC00494 acted as a "miRNAs sponge" to compete with MED19 for the biding of miR-3619-5p, led to the upregulation of MED19. LINC00494/miR-3619-5p/MED19 axis participated in chloroprocaine-mediated inhibition of proliferation, invasion and promotion of apoptosis of breast cancer cells. Consequently, our finding suggested local anesthetic chloroprocaine attenuated breast cancer aggressiveness through LINC00494-mediated signaling pathway, which detailly revealed the clinical value of chloroprocaine during breast cancer treatment.

Characterization difference of typical KL1, KL2 and ST11-KL64 hypervirulent and carbapenem-resistant Klebsiella pneumoniae.

Almost all the formation of hypervirulent and carbapenem-resistant Klebsiella pneumoniae follow two major patterns: KL1/KL2 hvKP strains acquire carbapenem-resistance plasmids (CR-hvKP), and carbapenem-resistant Klebsiella pneumoniae (CRKP) strains obtain virulence plasmids (hv-CRKP). These two patterns may pose different phenotypes. In this study, three typical resistance and hypervirulent K. pneumoniae (KL1, KL2, and ST11-KL64), isolating from poor prognosis patients, were selected. Compared with ST11-KL64 hv-CRKP, KL1/KL2 hypervirulent lineages harbor significantly fewer resistance determinants and exhibited lower-level resistance to antibiotics. Notably, though the blaKPC gene could be detected in all these isolates, KL1/KL2 hvKP strain did not exhibit corresponding high-level carbapenem resistance. Unlike the resistance features, we did not observe significant virulence differences between the three strains. The ST11-KL64 hv-CRKP (1403) in this study, showed similar mucoviscosity, siderophores production, and biofilm production compared with KL1 and KL2 hvKP. Moreover, the hypervirulent of ST11-KL64 hvKP also verified with the human lung epithelial cells infection and G. mellonella infection models. Moreover, we found the pLVPK-like virulence plasmid and IncF blaKPC-2 plasmid was crucial for the formation of hypervirulent and carbapenem-resistant K. pneumoniae. The conservation of origin of transfer site (oriT) in these virulence and blaKPC-2 plasmids, indicated the virulence plasmids could transfer to CRKP with the help of blaKPC-2 plasmids. The co-existence of virulence plasmid and blaKPC-2 plasmid facilitate the formation of ST11-KL64 hv-CPKP, which then become nosocomial epidemic under the antibiotic stress. The ST11-KL64 hv-CPKP may poses a substantial threat to healthcare networks, urgent measures were needed to prevent further dissemination in nosocomial settings.

Efficacy of auricular acupressure on lung function among chronic obstructive pulmonary disease: A meta-analysis of randomised controlled trials.

OBJECTIVES: To systematically evaluate the efficacy of auricular acupressure on lung function, sleep quality and quality of life in chronic obstructive pulmonary disease patients. BACKGROUND: Auricular acupressure has been increasingly used in chronic obstructive pulmonary disease patients, such as lung function and sleep quality, but the efficacy has not yet been unified. DESIGN: A meta-analysis of randomised controlled trials. METHODS: Randomised controlled trials comparing auricular acupressure intervention with non-auricular acupressure intervention in chronic obstructive pulmonary disease patients were included. We searched English databases and Chinese databases from the inception to 26 December 2022. The risk of bias was assessed by the Cochrane risk of bias tool. The PRISMA statement was used to report a meta-analysis. RESULTS: A total of 12 randomised controlled trials with 987 chronic obstructive pulmonary disease patients were included. The meta-analysis showed that auricular acupressure had significant differences in improving lung function, including FEV1 (MD = 0.29, 95% CI: 0.21 to 0.37, p < .0001), FVC (MD = 0.24, 95% CI: 0.14 to 0.34, p < .0001) and FEV1/FVC (MD = 4.70, 95% CI: 3.63 to 5.78, p < .0001). There was also a positive effect on sleep quality (MD = -0.71, 95% CI: -0.89 to -0.53, p < .0001) and quality of life (MD = -3.20, 95% CI: -3.92 to -2.49, p < .0001). CONCLUSIONS: The results indicated auricular acupressure had a positive efficacy in chronic obstructive pulmonary disease patients to improve lung function, sleep quality and quality of life, but these results should be treated with caution due to the low quality of included studies. Future researchers need to conduct more high-quality randomised controlled trials to provide a solid basis to demonstrate the efficacy of auricular acupressure in chronic obstructive pulmonary disease patients. RELEVANT TO CLINICAL PRACTICE: Auricular acupressure has the advantages of being non-invasive, convenient and without significant side effects. This review suggested auricular acupressure could be considered a non-pharmacological intervention for patients. Clinical nurses can teach chronic obstructive pulmonary disease patients to perform auricular acupressure to help self-manage complications. PATIENT OR PUBLIC CONTRIBUTION: No Patient or Public Contribution.

Hyaluronic Acid-Based CuS Nanoenzyme Biodegradable Microneedles for Treating Deep Cutaneous Fungal Infection without Drug Resistance.

Deep cutaneous fungal infection (DCFI) is difficult to be treated by the traditional topical application due to low drug transdermal efficiency, poor fungicidal effect, and easy to develop drug resistance. Here, we report a novel biodegradable microneedle patch (CuS/PAF-26 MN) for DCFI treatment. CuS/PAF-26 MN is composed of hyaluronic acid (HA) and sodium carboxymethylcellulose (CMC-Na), which can simultaneously deliver copper sulfide nanoenzyme (CuS NE) and antimicrobial peptide (PAF-26). CuS NE catalyzes hydrogen peroxide to produce reactive oxygen species (ROS), and PAF-26 directly destroys the cell membrane of fungi. The combination of ROS toxicity produced by CuS NE and the destruction of fungal membrane by PAF-26 shows strong antifungal activities without drug resistance. The antifungal effect of CuS/PAF-26 MN is significantly superior to that of traditional ointment, CuS MN or PAF-26 MN in a DCFI mouse model. Therefore, CuS/PAF-26 MN shows a promising application prospect for treating DCFI.

Pull-to-Peel of Two-Dimensional Materials for the Simultaneous Determination of Elasticity and Adhesion.

The flexible and clinging nature of ultrathin films requires an understanding of their elastic and adhesive properties in a wide range of circumstances from fabrications to applications. Simultaneously measuring both properties, however, is extremely difficult as the film thickness diminishes to the nanoscale. Here we address such difficulties through peeling by pulling thin films off from the substrates (we thus refer to it as "pull-to-peel"). Particularly, we perform in situ pull-to-peel of graphene and MoS2 films in a scanning electron microscope and achieve simultaneous determination of their Young's moduli and adhesions to gold substrates. This is in striking contrast to other conceptually similar tests available in the literature, including indentation tests (only measuring elasticity) and spontaneous blisters (only measuring adhesion). Furthermore, we show a weakly nonlinear Hooke's relation for the pull-to-peel response of two-dimensional materials, which may be harnessed for the design of nanoscale force sensors or exploited in other thin-film systems.

Bathymetry of a macro-pulsed chaotic laser based on a 520†nm laser diode subject to free space optical feedback.

We generate a macro-pulsed chaotic laser based on pulse-modulated laser diode subject to free space optical feedback, and demonstrate the performance of suppressing backscattering interference and jamming in turbid water. The macro-pulsed chaotic laser with a wavelength of 520 nm as a transmitter is used with a correlation-based lidar receiver to perform an underwater ranging. At the same power consumption, macro-pulsed lasers have higher peak power than in the continuous-wave form, enabling the former to detect longer ranging. The experimental results show that a chaotic macro-pulsed laser has excellent performance of suppressing the backscattering of water column and anti-noise interference compared with traditional pulse laser, especially by multiple accumulations about 10∼30 times, and target position can still be determined when SNR is -20 dB.