RESUMEN
The multiple magneto-/electrical quantum transitions discovered with d-band correlated metastable perovskite oxides, such as rare-earth nickelate (ReNiO3), enable applications in artificial intelligence and multifunctional sensors. Nevertheless, to date such investigation merely focuses on ReNiO3 with light or middle rare-earth composition, while the analogous explorations toward heavy rare-earth (ReHNiO3, ReH after Gd) are impeded by their ineffective material synthesis relying on GPa pressure. Herein, for the first time we synthesized the powder of ReHNiO3 in grams/batch with â¼1000 times lower pressure and â¼300 °C lower temperature in comparison to the previous â¼101 milligram/batch results, assisted by their eutectic precipitation and heterogeneous growth within alkali-metal halide molten salt at MPa oxygen pressures. Further in situ characterizations under high pressures within a diamond anvil cell reveal a distinguishing pressure predominated bad metal transport within the nonequilibrium state of ReHNiO3 showing high-pressure sensitivity up to 10 GPa, and the temperature dependences in electrical transportations are effectively frozen.
RESUMEN
We conduct a comprehensive theoretical analysis of wurtzite GaxIn1-xN ternary alloys, focusing on their structural, electronic, elastic, piezoelectric, and dielectric properties through rigorous first-principles calculations. Our investigation systematically explores the influence of varying Ga composition (x = 0%, 25%, 50%, 75%, 100%) on the alloy properties. Remarkably, we observe a distinctive non-linear correlation between the band gap and Ga concentration, attributable to unique slopes in the absolute positions of the valence band maximum and conduction band minimum with respect to Ga concentration. Our effective band structure analysis reveals the meticulous preservation of Bloch characters near band extrema, minimizing charge carrier scattering. Furthermore, we scrutinize deviations from linear Vegard-like dependence in elastic, piezoelectric, and dielectric constants. Additionally, our calculations encompass various optical properties, including absorption coefficient, reflectivity, refractive index, energy loss function, and extinction coefficient. We analyze their trends with photon energy, providing valuable insights into the optical behavior of GaxIn1-xN alloys. Our results, in excellent agreement with available experimental data, significantly contribute to a deeper understanding of the alloys' electronic properties. This study offers valuable insights that may illuminate potential applications of GaxIn1-xN alloys in diverse technological fields.
RESUMEN
Two-dimensional (2D) materials have potential applications in nanoscale sensors and spintronic devices. Herein, motivated by experimental synthesis of a CrI3 monolayer possessing intrinsic magnetism and a Janus MoSSe monolayer with piezoelectricity, we propose a 2D Janus Cr2I3F3 monolayer as a multifunctional material exhibiting both piezoelectricity and ferromagnetism. Using density functional theory calculations, we systematically investigated the structural stability and the electronic, magnetic, and piezoelectric properties of the Janus Cr2I3F3 monolayer. We predicted that a vertical polarization of up to -0.155 × 10-10 C/m is induced in the Cr2I3F3 monolayer due to the breaking of symmetry. The origination mechanism of polarization was demonstrated in terms of a local dipole moment calculated by maximally localized Wannier functions. Meanwhile, it was found that a remarkable piezoelectric response can be produced under a uniaxial strain in the basal plane. The calculated piezoelectric coefficients of the Cr2I3F3 monolayer compare favorably with those of the frequently used bulk piezoelectric materials such as α-quartz and wurtzite AlN. Particularly, the e31 and d31 values of the Cr2I3F3 monolayer are nearly 10 times as large as that of Mo-based transition metal dichalcogenides. We also found that the magnitude of e31 mainly arises from the ionic contribution, while the electronic contribution can be nearly neglected. The considerable piezoelectric response combined with the intrinsic magnetism make the Janus Cr2I3F3 monolayer a potential candidate for novel multifunctional devices integrating both piezoelectric and spintronic applications.
RESUMEN
Segregation of rare earth alloying elements are known to segregate to grain boundaries in Mg and suppress grain boundary sliding via strong chemical bonds. Segregation of Mn, however, has recently been found to enhance grain boundary sliding in Mg, thereby boosting its ductility. Taking the Mg (2¯114) twin boundary as an example, we performed a first-principles comparative study on the segregation and chemical bonding of Y, Zn, and Mn at this boundary. We found that both Y-4d and Mn-3d states hybridized with the Mg-3sp states, while Zn-Mg bonding was characterized by charge transfer only. Strong spin-polarization of Mn pushed the up-spin 3d states down, leading to less anisotropic Mn-Mg bonds with more delocalized charge distribution at the twin boundary, and thus promotes grain boundary plasticity, e.g., grain boundary sliding.
RESUMEN
Transition metal dichalcogenides (TMDs) with a 1T' layer structure have recently received intense interest due to their outstanding physical and chemical properties. While the physicochemical behaviors of 1T' TMD monolayers have been widely investigated, the corresponding properties of layered 1T' TMD crystals have rarely been studied. As TMD monolayers do not have interlayer interactions, their physicochemical properties will differ from those of layered TMD materials. In this study, the electronic and mechanical characteristics of a range of 1T' TMDs are systematically examined by means of density functional theory (DFT) calculations. Our results reveal that the properties of 1T' TMDs are mainly affected by their anions. The disulfides are stiffer and more rigid, diselenides are more brittle. In addition, the 1T' polytype is softer than 2H TMDs. Comparison with the properties of the monolayers shows that the interlayer van der Waals forces can slightly weaken the TM-X covalent bonding strength, which can further influence the mechanical properties. These insights revealed by our theoretical studies may boost more applications of 1T' TMD materials.
RESUMEN
Two-dimensional (2D) materials have attracted great attention mainly due to their unique physical properties and ability to fulfill the demands of future nanoscale devices. By performing high-throughput first-principles calculations combined with a semiempirical van der Waals dispersion correction, we have screened 73 direct- and 183 indirect-gap 2D nonmagnetic semiconductors from nearly 1000 monolayers according to the criteria for thermodynamic, mechanical, dynamic, and thermal stabilities and conductivity type. We present the calculated lattice constants, formation energy, Young's modulus, Poisson's ratio, shear modulus, anisotropic effective mass, band structure, band gap, ionization energy, electron affinity, and simulated scanning tunnel microscopy for each candidate meeting our criteria. The resulting 2D semiconductor database (2DSdb) can be accessed via the Web site https://materialsdb.cn/2dsdb/index.html. The 2DSdb provides an ideal platform for computational modeling and design of new 2D semiconductors and heterostructures in photocatalysis, nanoscale devices, and other applications. Further, a linear fitting model was proposed to evaluate band gap, ionization energy, and electron affinity of 2D semiconductors from the density functional theory (DFT) calculated data as initial input. This model can be as precise as hybrid DFT but with much lower computational cost.
RESUMEN
A family of two-dimensional (2D) transition metal borides, referred to as MBenes, is recently emerging as novel materials with great potentials in electronic and energy harvesting applications to the field of materials science and technology. Transition metal borides can be synthesized from chemical exfoliation of ternary-layered transition metal borides, known as MAB phases. Previously it has been predicted that thin pristine 2D Sc-, Ti-, Zr-, Hf-, V-, Nb-, Ta-, Mo-, and W-based transition metal borides with hexagonal phase are more stable than their corresponding orthorhombic phase. Here, using a set of first-principles calculations (at absolute zero temperature), we have examined the geometric, dynamic stability, electronic structures, work function, bond strength, and mechanical properties of the hexagonal monolayer of transition metal borides (M= Sc, Ti, Zr, Hf, V, Nb, Ta, Mo, and W) chemically terminated with F, O, and OH. The results of the formation energies of terminated structures imply that the surface terminations could make a strong bond to the surface transition metals and provide the possibility of the development of transition metal borides with those surface terminations. Except for ScBO, which is an indirect bandgap semiconductor, the other transition metal borides are metallic or semimetal. Particularly, TiBF, ZrBF, and HfBF are metallic systems whose band dispersions close to the Fermi level indicate the coexistence of type-I and type-II nodal lines. Our calculated work functions indicate that 2D transition metal borides with OH (O) functionalization obtain the lowest (highest) work functions. The results of the mechanical properties of the considered structures imply that oxygen functionalized transition metal borides exhibit the stiffest mechanical strength with 248
RESUMEN
Defect formation energy as well as the charge transition level (CTL) plays a vital role in understanding the underlying mechanism of the effect of defects on material properties. However, the accurate calculation of charged defects, especially for two-dimensional materials, is still a challenging topic. In this paper, we proposed a simplified scheme to rescale the CTLs from the semilocal to the hybrid functional level, which is time-saving during the charged defect calculations. Based on this method, we systematically calculated the formation energy of four kinds of intrinsic point defects in two-dimensional hexagonal boron nitride (2D h-BN) by uniformly scaling the supercells by which we found a time-saving method to obtain the "special vacuum size" (Komsa, H.-P.; Berseneva, N.; Krasheninnikov, A. V.; Nieminen, R. M. Phys. Rev. X, 2014, 4, 031044). Native defects including nitrogen vacancy (VN), boron vacancy (VB), nitrogen atom anti-sited on boron position (NB), and boron atom anti-sited on nitrogen position (BN) were calculated. The reliability of our scheme was verified by taking VN as a probe to conduct the hybrid functional calculation, and the rescaled CTL is within the acceptable error range with the pure HSE results. Based on the results of CTLs, all the native point defects in the h-BN monolayer act as hole or electron trap centers under certain conditions and would suppress the p- or n-type electrical conduction of h-BN-based devices. Our rescale method is also suitable for other materials for defect charge transition level calculations.
RESUMEN
The discovery of hydrogen-induced electronic phase transitions in strongly correlated materials such as rare-earth nickelates has opened up a new paradigm in regulating materials' properties for both fundamental study and technological applications. However, the microscopic understanding of how protons and electrons behave in the phase transition is lacking, mainly due to the difficulty in the characterization of the hydrogen doping level. Here, we demonstrate the quantification and trajectory of hydrogen in strain-regulated SmNiO3 by using nuclear reaction analysis. Introducing 2.4% of elastic strain in SmNiO3 reduces the incorporated hydrogen concentration from ~1021 cm-3 to ~1020 cm-3. Unexpectedly, despite a lower hydrogen concentration, a more significant modification in resistivity is observed for tensile-strained SmNiO3, substantially different from the previous understanding. We argue that this transition is explained by an intermediate metastable state occurring in the transient diffusion process of hydrogen, despite the absence of hydrogen at the post-transition stage.
RESUMEN
The electronic properties of silicene zigzag nanoribbons with the presence of perpendicular fields are studied by using first-principles calculations and the generalized nearest neighboring approximation method. In contrast to the planar graphene, in silicene the Si atoms are not coplanar. As a result, by applying perpendicular fields to the two-dimensional silicene sheet, the on-site energy can be modulated and the band gap at the Dirac point is open. The buckled structure also creates a height difference between the two edges of the silicene zigzag nanoribbons. We find that the external fields can modulate the energies of spin-polarized edge states and their corresponding band gaps. Due to the polarization in the plane, the modulation effect is width dependent and becomes much more significant for narrow ribbons.