BPR3P0128, a non-nucleoside RNA-dependent RNA polymerase inhibitor, inhibits SARS-CoV-2 variants of concern and exerts synergistic antiviral activity in combination with remdesivir.

Viral RNA-dependent RNA polymerase (RdRp), a highly conserved molecule in RNA viruses, has recently emerged as a promising drug target for broad-acting inhibitors. Through a Vero E6-based anti-cytopathic effect assay, we found that BPR3P0128, which incorporates a quinoline core similar to hydroxychloroquine, outperformed the adenosine analog remdesivir in inhibiting RdRp activity (EC50 = 0.66 µM and 3 µM, respectively). BPR3P0128 demonstrated broad-spectrum activity against various severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants of concern. When introduced after viral adsorption, BPR3P0128 significantly decreased SARS-CoV-2 replication; however, it did not affect the early entry stage, as evidenced by a time-of-drug-addition assay. This suggests that BPR3P0128's primary action takes place during viral replication. We also found that BPR3P0128 effectively reduced the expression of proinflammatory cytokines in human lung epithelial Calu-3 cells infected with SARS-CoV-2. Molecular docking analysis showed that BPR3P0128 targets the RdRp channel, inhibiting substrate entry, which implies it operates differently-but complementary-with remdesivir. Utilizing an optimized cell-based minigenome RdRp reporter assay, we confirmed that BPR3P0128 exhibited potent inhibitory activity. However, an enzyme-based RdRp assay employing purified recombinant nsp12/nsp7/nsp8 failed to corroborate this inhibitory activity. This suggests that BPR3P0128 may inhibit activity by targeting host-related RdRp-associated factors. Moreover, we discovered that a combination of BPR3P0128 and remdesivir had a synergistic effect-a result likely due to both drugs interacting with separate domains of the RdRp. This novel synergy between the two drugs reinforces the potential clinical value of the BPR3P0128-remdesivir combination in combating various SARS-CoV-2 variants of concern.

Discovery of an Orally Efficacious MYC Inhibitor for Liver Cancer Using a GNMT-Based High-Throughput Screening System and Structure-Activity Relationship Analysis.

Glycine-N-methyl transferase (GNMT) downregulation results in spontaneous hepatocellular carcinoma (HCC). Overexpression of GNMT inhibits the proliferation of liver cancer cell lines and prevents carcinogen-induced HCC, suggesting that GNMT induction is a potential approach for anti-HCC therapy. Herein, we used Huh7 GNMT promoter-driven screening to identify a GNMT inducer. Compound K78 was identified and validated for its induction of GNMT and inhibition of Huh7 cell growth. Subsequently, we employed structure-activity relationship analysis and found a potent GNMT inducer, K117. K117 inhibited Huh7 cell growth in vitro and xenograft in vivo. Oral administration of a dosage of K117 at 10 mpk (milligrams per kilogram) can inhibit Huh7 xenograft in a manner equivalent to the effect of sorafenib at a dosage of 25 mpk. A mechanistic study revealed that K117 is an MYC inhibitor. Ectopic expression of MYC using CMV promoter blocked K117-mediated MYC inhibition and GNMT induction. Overall, K117 is a potential lead compound for HCC- and MYC-dependent cancers.

The crossed [2+2] cycloaddition of 1-phenylcyclopropene and 1-bromo-2-phenylcyclopropene.

1-Bromo-2-phenylcyclopropene (2) underwent [2+2] dimerization to generate 1,2-dibromo-4,5-diphenyltricyclo[3.1.0.0(2,4)]hexane (5), which was heated to form 1,2-dibromo-4,5-diphenylcyclohexa-1,4-diene (6) followed by oxidation to yield 4',5'-dibromo-o-terphenyl (7). o-Terphenyl 7 could be synthesized in one-pot reactions from 1,1,2-tribromocyclopropane (3). When cyclopropane 3 was treated with 1.5 equiv of methyllithium followed by slowly adding the proton source, crossed [2+2] adduct 8 was isolated in 40% yield. Compound 8 was heated and oxidated to produce 4'-bromo-o-terphenyl (11).

Discovery of novel inhibitors of Aurora kinases with indazole scaffold: In silico fragment-based and knowledge-based drug design.

Aurora kinases have emerged as important anticancer targets so that there are several inhibitors have advanced into clinical study. Herein, we identified novel indazole derivatives as potent Aurora kinases inhibitors by utilizing in silico fragment-based approach and knowledge-based drug design. After intensive hit-to-lead optimization, compounds 17 (dual Aurora A and B), 21 (Aurora B selective) and 30 (Aurora A selective) possessed indazole privileged scaffold with different substituents, which provide sub-type kinase selectivity. Computational modeling helps in understanding that the isoform selectivity could be targeted specific residue in the Aurora kinase binding pocket in particular targeting residues Arg220, Thr217 or Glu177.

Discovery of BPR1K871, a quinazoline based, multi-kinase inhibitor for the treatment of AML and solid tumors: Rational design, synthesis, in vitro and in vivo evaluation.

The design and synthesis of a quinazoline-based, multi-kinase inhibitor for the treatment of acute myeloid leukemia (AML) and other malignancies is reported. Based on the previously reported furanopyrimidine 3, quinazoline core containing lead 4 was synthesized and found to impart dual FLT3/AURKA inhibition (IC50 = 127/5 nM), as well as improved physicochemical properties. A detailed structure-activity relationship study of the lead 4 allowed FLT3 and AURKA inhibition to be finely tuned, resulting in AURKA selective (5 and 7; 100-fold selective over FLT3), FLT3 selective (13; 30-fold selective over AURKA) and dual FLT3/AURKA selective (BPR1K871; IC50 = 19/22 nM) agents. BPR1K871 showed potent anti-proliferative activities in MOLM-13 and MV4-11 AML cells (EC50 ~ 5 nM). Moreover, kinase profiling and cell-line profiling revealed BPR1K871 to be a potential multi-kinase inhibitor. Functional studies using western blot and DNA content analysis in MV4-11 and HCT-116 cell lines revealed FLT3 and AURKA/B target modulation inside the cells. In vivo efficacy in AML xenograft models (MOLM-13 and MV4-11), as well as in solid tumor models (COLO205 and Mia-PaCa2), led to the selection of BPR1K871 as a preclinical development candidate for anti-cancer therapy. Further detailed studies could help to investigate the full potential of BPR1K871 as a multi-kinase inhibitor.

Homology modeling of DFG-in FMS-like tyrosine kinase 3 (FLT3) and structure-based virtual screening for inhibitor identification.

The inhibition of FMS-like tyrosine kinase 3 (FLT3) activity using small-molecule inhibitors has emerged as a target-based alternative to traditional chemotherapy for the treatment of acute myeloid leukemia (AML). In this study, we report the use of structure-based virtual screening (SBVS), a computer-aided drug design technique for the identification of new chemotypes for FLT3 inhibition. For this purpose, homology modeling (HM) of the DFG-in FLT3 structure was carried using two template structures, including PDB ID: 1RJB (DFG-out FLT3 kinase domain) and PDB ID: 3LCD (DFG-in CSF-1 kinase domain). The modeled structure was able to correctly identify known DFG-in (SU11248, CEP-701, and PKC-412) and DFG-out (sorafenib, ABT-869 and AC220) FLT3 inhibitors, in docking studies. The modeled structure was then used to carry out SBVS of an HTS library of 125,000 compounds. The top scoring 97 compounds were tested for FLT3 kinase inhibition, and two hits (BPR056, IC50 = 2.3 and BPR080, IC50 = 10.7 µM) were identified. Molecular dynamics simulation and density functional theory calculation suggest that BPR056 (MW: 325.32; cLogP: 2.48) interacted with FLT3 in a stable manner and could be chemically optimized to realize a drug-like lead in the future.

Small-molecule EGFR tyrosine kinase inhibitors for the treatment of cancer.

INTRODUCTION: EGFR has been implicated in various malignancies such as NSCLC, breast, head and neck, and pancreatic cancer. Numerous drugs have been developed in order to target the tyrosine domain of EGFR as an approach in cancer treatment. AREAS COVERED: This article focuses on the different generations of EGFR tyrosine kinase inhibitors (TKIs). This spans from the emergence of the first-generation EGFR-TKIs to overcoming drug resistance using second-generation EGFR-TKIs and to reducing adverse effect (AE) using mutant-selective third-generation EGFR-TKIs. EXPERT OPINION: Current TKI treatment is frequently accompanied by drug resistance and/or serious AEs. There has been the promise of advancements in second-generation EGFR-TKIs that could overcome drug resistance, acting as second- or third-line salvage treatment, but this promise has yet to be met. That being said, both issues are currently being addressed with mutant-selective EGFR-TKIs with the expectation of bringing more EGFR-targeted therapy into the next phase of cancer therapy in the future.

Ligand efficiency based approach for efficient virtual screening of compound libraries.

Here we report for the first time the use of fit quality (FQ), a ligand efficiency (LE) based measure for virtual screening (VS) of compound libraries. The LE based VS protocol was used to screen an in-house database of 125,000 compounds to identify aurora kinase A inhibitors. First, 20 known aurora kinase inhibitors were docked to aurora kinase A crystal structure (PDB ID: 2W1C); and the conformations of docked ligand were used to create a pharmacophore (PH) model. The PH model was used to screen the database compounds, and rank (PH rank) them based on the predicted IC50 values. Next, LE_Scale, a weight-dependant LE function, was derived from 294 known aurora kinase inhibitors. Using the fit quality (FQ = LE/LE_Scale) score derived from the LE_Scale function, the database compounds were reranked (PH_FQ rank) and the top 151 (0.12% of database) compounds were assessed for aurora kinase A inhibition biochemically. This VS protocol led to the identification of 7 novel hits, with compound 5 showing aurora kinase A IC50 = 1.29 µM. Furthermore, testing of 5 against a panel of 31 kinase reveals that it is selective toward aurora kinase A & B, with <50% inhibition for other kinases at 10 µM concentrations and is a suitable candidate for further development. Incorporation of FQ score in the VS protocol not only helped identify a novel aurora kinase inhibitor, 5, but also increased the hit rate of the VS protocol by improving the enrichment factor (EF) for FQ based screening (EF = 828), compared to PH based screening (EF = 237) alone. The LE based VS protocol disclosed here could be applied to other targets for hit identification in an efficient manner.

3D-QSAR-assisted drug design: identification of a potent quinazoline-based Aurora kinase inhibitor.

We describe the 3D-QSAR-assisted design of an Aurora kinase A inhibitor with improved physicochemical properties, in vitro activity, and in vivo pharmacokinetic profiles over those of the initial lead. Three different 3D-QSAR models were built and validated by using a set of 66 pyrazole (Model I) and furanopyrimidine (Model II) compounds with IC(50) values toward Aurora kinase A ranging from 33 nM to 10.5 µM. The best 3D-QSAR model, Model III, constructed with 24 training set compounds from both series, showed robustness (r(2) (CV) =0.54 and 0.52 for CoMFA and CoMSIA, respectively) and superior predictive capacity for 42 test set compounds (R(2) (pred) =0.52 and 0.67, CoMFA and CoMSIA). Superimposition of CoMFA and CoMSIA Model III over the crystal structure of Aurora kinase A suggests the potential to improve the activity of the ligands by decreasing the steric clash with Val147 and Leu139 and by increasing hydrophobic contact with Leu139 and Gly216 residues in the solvent-exposed region of the enzyme. Based on these suggestions, the rational redesign of furanopyrimidine 24 (clog P=7.41; Aurora A IC(50) =43 nM; HCT-116 IC(50) =400 nM) led to the identification of quinazoline 67 (clog P=5.28; Aurora A IC(50) =25 nM; HCT-116 IC(50) =23 nM). Rat in vivo pharmacokinetic studies showed that 67 has better systemic exposure after i.v. administration than 24, and holds potential for further development.

A novel synthesis of calix[4]thiophenes and calix[4]furans.

The addition of heteroaryllithium to various ketones followed by dehydration gave 1-(2-heteroaryl)cycloalkenes and (2-hetero- aryl)alkenes. When alkenes were treated with 10 mol% NIS, calix[4]thiophenes and calix[4]furans were obtained in good yields.