Synthesis of novel 4-substituted isatin Schiff base derivatives as potential autophagy inducers and evaluation of their antitumour activity.

Induction of autophagic death in cancer cells is one of the promising strategies for the development of anti-cancer therapeutics. In the present study, we designed and synthesized a series of isatin Schiff base derivatives containing thioether structures. After discovering the highly active target compound H13 (IC50 = 4.83 µM) based on in vitro antiproliferation, we also found it had a high safety against normal cells HEK293 with CC50 of 69.01 µM, indicating a sufficient therapeutic window. In addition, to provide reference for subsequent studies, a model was successfully constructed by Sybyl software. Preliminary mechanistic studies suggested that H13-induced apoptosis may be closely related to ROS accumulation and mitochondrial dysfunction. Subsequent studies revealed that H13 inhibited cell proliferation by inducing cellular autophagy mainly through blocking signal of the PI3K/AKT/mTOR pathway. Altogether, these results suggested that H13 was potentially valuable as a lead compound.

Copper-Bridge-Enhanced p-Band Center Modulation of Carbon-Bismuth Heterojunction for CO2 Electroreduction.

Bismuth-based catalysts have advanced CO2 electroreduction to formic acid, but their intrinsic electronic structure remains a key obstacle to achieving a high catalytic performance. Herein, a copper bridge strategy is proposed to enhance electronic modulation effects in bismuth/carbon composites. Density functional theory calculations prove the novel p-d-p hybrid orbitals on the carbon-copper-bismuth heterojunction structure (Bi-Cu/HMCS) could stabilize the HCOO* intermediate and lower the thermodynamic barrier from CO2 to formic acid. With the rapid electron-supplying effect of "copper bridge", the faradaic efficiency of formate reaches 100% (±2%) at a low overpotential of 500 mV and remains above 90% within a wide potential range. Using a solid-state electrolyte device, pure 0.6 M HCOOH is produced at a stable current density of 100 mA cm-2 within 7.5 h, boasting an impressive energy efficiency of 53.8%. This work offers a new strategy for optimizing electronic structure of metal/carbon composite electrocatalysts.

Tailoring the CO2 Hydrogenation Performance of Fe-Based Catalyst via Unique Confinement Effect of the Carbon Shell.

Even though Fe-based catalysts have been widely employed for CO2 hydrogenation into hydrocarbons, oxygenates, liquid fuels, etc., the precise regulation of their physicochemical properties is needed to enhance the catalytic performance. Herein, under the guidance of the traditional concept in heterogeneous catalysis-confinement effect, a core-shell structured catalyst Na-Fe3 O4 @C is constructed to boost the CO2 hydrogenation performance. Benefiting from the carbon-chain growth limitation, tailorable H2 /CO2 ratio on the catalytic interface, and unique electronic property that all endowed by the confinement effect, the selectivity and space-time yield of light olefins (C2 = -C4 = ) are as high as 47.4 % and 15.9 g molFe -1  h-1 , respectively, which are all notably higher than that from the shell-less counterpart. The function mechanism of the confinement effect in Fe-based catalysts are clarified in detail by multiple characterization and density functional theory (DFT). This work may offer a new prospect for the rational design of CO2 hydrogenation catalyst.

Boosting Methanol-Mediated CO2 Hydrogenation into Aromatics by Synergistically Tailoring Oxygen Vacancy and Acid Site Properties of Multifunctional Catalyst.

Even though the direct hydrogenation of CO2 into aromatics has been realized via a methanol-mediated pathway and multifunctional catalyst, few works have been focused on the simultaneously rational design of each component in multifunctional catalyst to improve the performance. Also, the structure-function relationship between aromatics synthesis performance and the different catalytic components (reducible metal oxide and acidic zeolite) has been rarely investigated. Herein, we increase the oxygen vacancy (Ov ) density in reducible Cr2 O3 by sequential carbonization and oxidation (SCO) treatments of Cr-based metal-organic frameworks. Thanks to the enriched Ov , Cr2 O3 -based catalyst affords high methanol selectivity of 98.1 % (without CO) at a CO2 conversion of 16.8 % under high reaction temperature (350 °C). Furthermore, after combining with the acidic zeolite H-ZSM-5, the multifunctional catalyst realizes the direct conversion of CO2 into aromatics with conversion and selectivity as high as 25.4 % and 80.1 % (without CO), respectively. The property of acid site in H-ZSM-5, especially the Al species that located at the intersection of straight and sinusoidal channels, plays a vital role in enhancing the aromatics selectivity, which can be precisely controlled by varying the hydrothermal synthesis conditions. Our work provides a synergistic strategy to boost the aromatics synthesis performance from CO2 hydrogenation.

Overview of the effects and mechanisms of NO and its donors on biofilms.

Microbial biofilm is undoubtedly a challenging problem in the food industry. It is closely associated with human health and life, being difficult to remove and antibiotic resistance. Therefore, an alternate method to solve these problems is needed. Nitric oxide (NO) as an antimicrobial agent, has shown great potential to disrupt biofilms. However, the extremely short half-life of NO in vivo (2 s) has facilitated the development of relatively more stable NO donors. Recent studies reported that NO could permeate biofilms, causing damage to cellular biomacromolecules, inducing biofilm dispersion by quorum sensing (QS) pathway and reducing intracellular bis-(3'-5')-cyclic dimeric guanosine monophosphate (c-di-GMP) levels, and significantly improving the bactericidal effect without drug resistance. In this review, biofilm hazards and formation processes are presented, and the characteristics and inhibitory effects of NO donors are carefully discussed, with an emphasis on the possible mechanisms of NO resistance to biofilms and some advanced approaches concerning the remediation of NO donor deficiencies. Moreover, the future perspectives, challenges, and limitations of NO donors were summarized comprehensively. On the whole, this review aims to provide the application prospects of NO and its donors in the food industry and to make reliable choices based on these available research results.

An out of box thinking: the changes of iron-porphyrin during meat processing and gastrointestinal tract and some methods for reducing its potential health hazard.

Iron-porphyrin is a very important substance in organisms, especially in animals. It is not only the source of iron in human body, but is also the catalytic center of many reactions. Previous studies suggested that adequate intake of iron was important for the health of human, especially for children and pregnant women. However, associated diseases caused by iron over-intake and excessive meat consumption suggested its potential harmfulness for human health. During meat processing, Iron-porphyrin will cause the oxidation of proteins and fatty acids. In the gastrointestinal tract, iron-porphyrin can induce the production of malondialdehyde, fats oxidation, and indirectly cause oxidation of amino acids and nitrates etc. Iron-porphyrin enters the intestinal tract and disturbs the balance of intestinal flora. Finally, some common measures for inhibiting its activity are introduced, including the use of chelating agent, antioxidants, competitive inhibitor, etc., as well as give the hypothesis that sodium chloride increases the catalytic activity of iron-porphyrin. The purpose of this review is to present an overview of current knowledge about the changes of iron-porphyrin in the whole technico- and gastrointesto- processing axis and to provide ideas for further research in meat nutrition.

Advances in the authentication of collagen products based on DNA technology.

Collagenous products are making their way into consumer markets such as foods, nutraceuticals, cosmetics and pharmaceuticals increasingly. Collagen in a large family of proteins is ubiquitous in metazoan. The most effective way to identify biological samples including collagen is DNA technology indisputably. However, the DNA content of collagen mostly derived from connective tissue is relatively less, and commercial collagen products are usually subjected to some harsh treatments in the production process, which makes DNA damage more serious, thus tracing their origin becomes a huge challenge. At present, DNA enrichment mainly relies on silica based centrifugal columns after extraction by classical phenol chloroform method. For improving the amplification of DNA fragments, small amplicons are designed based on more stable mitochondrial genes, such as cytochrome b gene (cytb). In addition to conventional PCR for DNA amplification, some new PCR techniques have also been developed, such as DNA barcoding techniques, PCR-Southern hybridization and fluorescent PCR. These PCR techniques have their pros and cons, and are mainly used in the identification of gelatin at present. The development of a complete set of DNA authentication is of great significance for the control of collagen products quality and will contribute to sustainable development of collagen industry.

Candidate molecules as alternative nitric oxide donors with better antibacterial property against Escherichia coli and Staphylococcus aureus.

AIMS: Four nitric oxide (NO) donors, S-nitrosoglutathione (GSNO), S-nitrosocysteine (CySNO), S-nitroso-N-acetylcysteine (SNAC), and 2-(2-S-nitroso propionamide) acetic acid (GAS) were prepared and their physicochemical characteristics were analyzed. Besides, the antibacterial properties of NO donors were investigated against Escherichia coli and Staphylococcus aureus. METHODS AND RESULTS: UV-visible absorption spectrum and Fourier transform infrared spectrum verified the successful preparation of RSNOs. All NO donors (10 mmol l-1) could release NO continuously, and the amount of NO release was from 80.22 µmol l-1 to 706.63 µmol l-1, in which the release of NO from SNAC was the highest, and the release of NO from NaNO2 was the least. The inhibition zone indicated that all NO donors showed stronger antibacterial activity against E. coli and S. aureus, and the antibacterial ability was in the order of SNAC > GSNO > CySNO > GAS > NaNO2 for both E. coli and S. aureus (P < 0.05). Scanning electron microscopy(SEM) showed that all NO donors could result in varying degrees of damage to cell wall and membrane of both E. coli and S. aureus and the damage of E. coli was more severe. CONCLUSION: Four alternative NO donors were successfully synthesized. All alternative NO donors showed better antibacterial properties against E. coli and S. aureus than NaNO2.

Discovery and Mechanism of Novel 7-Aliphatic Amine Tryptanthrin Derivatives against Phytopathogenic Bacteria.

Rice bacterial leaf blight is a destructive bacterial disease caused by Xanthomonas oryzae pv. oryzae (Xoo) that seriously threatens crop yields and their associated economic benefits. In this study, a series of improved dissolubility 7-aliphatic amine tryptanthrin derivatives was designed and synthesized, and their potency in antibacterial applications was investigated. Notably, compound 6e exhibited excellent activity against Xoo, with an EC50 value of 2.55 µg/mL, compared with the positive control bismerthiazol (EC50 = 35.0 µg/mL) and thiodiazole copper (EC50 = 79.4 µg/mL). In vivo assays demonstrated that 6e exhibited a significant protective effect on rice leaves. After exposure, the morphology of the bacteria was partially atrophied by SEM. Furthermore, 6e increased the accumulation of intracellular reactive oxygen species, causing cell apoptosis and the formation of bacterial biofilms. All the results indicated that 6e could be a potential agrochemical bactericide for controlling phytopathogenic bacteria.

Novel 2-Amino-1,4-Naphthoquinone Derivatives Induce A549 Cell Death through Autophagy.

A series of 1,4-naphthoquinone derivatives containing were synthesized as anti-cancer agents and the crystal structure of compound 5a was confirmed by X-ray diffraction. In addition, the inhibitory activities against four cancer cell lines (HepG2, A549, K562, and PC-3) were tested, respectively, and compound 5i showed significant cytotoxicity on the A549 cell line with the IC50 of 6.15 µM. Surprisingly, in the following preliminary biological experiments, we found that compound 5i induced autophagy by promoting the recycling of EGFR and signal transduction in the A549 cell, resulting in the activation of the EGFR signal pathway. The potential binding pattern between compound 5i and EGFR tyrosine kinase (PDB ID: 1M17) was also identified by molecular docking. Our research paves the way for further studies and the development of novel and powerful anti-cancer drugs.

Using nanocellulose to improve heat-induced cull cow meat myofibrillar protein gels: effects of particle morphology and content.

BACKGROUND: Enhancing protein gel properties is essential to improve the texture of meat products. In this study, the improvement effects of three types of nanocellulose, i.e. rod-like cellulose nanocrystals (CNC), long-chain cellulose nanofibers (CNF) and spherical cellulose nanospheres (CNS) with different concentrations (1, 3, 5, 10, 15 and 20 g kg-1 ), on cull cow meat myofibrillar protein (MP) gel were investigated. RESULTS: Compared with needle-shaped CNC and spherical CNS, the addition of 10 and 20 g kg-1 long-chain CNF had the most significant improvement effect on gel hardness and water-holding capacity, respectively (P < 0.05), increasing to 160.1 g and 97.8%, respectively. In addition, the incorporation of long-chain CNF shortened the T2 relaxation time and induced the formation of the densest network structure and promoted the phase transition of the gel. However, excessive filling of nanocellulose would destroy the structure of the gel, which was not conducive to the improvement of gel properties. Fourier transform infrared results showed that there was no chemical reaction between the three nanocellulose types and MP, but the addition of nanocellulose was conducive to gel formation. CONCLUSION: The improvement of MP gel properties by adding nanocellulose mainly depends on its morphology and concentration. Nanocellulose with higher aspect ratio is more beneficial to the improvement of gel properties. For each nanocellulose type, there is an optimal addition amount for MP gel improvement. © 2023 Society of Chemical Industry.

Carbon-Based Electron Buffer Layer on ZnOx -Fe5 C2 -Fe3 O4 Boosts Ethanol Synthesis from CO2 Hydrogenation.

The conversion of CO2 into ethanol with renewable H2 has attracted tremendous attention due to its integrated functions of carbon elimination and chemical synthesis, but remains challenging. The electronic properties of a catalyst are essential to determine the adsorption strength and configuration of the key intermediates, therefore altering the reaction network for targeted synthesis. Herein, we describe a catalytic system in which a carbon buffer layer is employed to tailor the electronic properties of the ternary ZnOx -Fe5 C2 -Fe3 O4 , in which the electron-transfer pathway (ZnOx →Fe species or carbon layer) ensures the appropriate adsorption strength of -CO* on the catalytic interface, facilitating C-C coupling between -CHx * and -CO* for ethanol synthesis. Benefiting from this unique electron-transfer buffering effect, an extremely high ethanol yield of 366.6 gEtOH kgcat -1 h-1 (with CO of 10 vol % co-feeding) is achieved from CO2 hydrogenation. This work provides a powerful electronic modulation strategy for catalyst design in terms of highly oriented synthesis.

Fetal neurodevelopmental spatio-temporal dynamic transcriptional landscape of maternal insult-induce autism spectrum disorder risk.

Maternal insults during pregnancy induces an increased risk of autism spectrum disorders (ASD) in offspring, but the neuropathological changes in this process remains not to be established. To shed light on this, the transcriptome datasets of maternal blood samples with children later diagnosed with ASD and typical development, and tissue samples of multiple brain regions from ASD patients and human neurodevelopment were conducted to identify the non-chasm differentially expressed genes (DEGs) to generate the spatio-temporal dynamic change. Combined enrichment and interaction network analysis revealed that non-chasm DEGs with similar expression trajectories in the same brain regions, were involved in neural, immune and metabolic GO functions and KEGG pathways, respectively, suggesting that did not performed exactly the same functions. Interestingly, our results found that non-chasm DEGs in frontal cortex and temporal cortex were associated with COVID-19, suggesting that as an environmental risk factor COVID-19 affects an increased risk of ASD.

A rethinking of collagen as tough biomaterials in meat packaging: assembly from native to synthetic.

Due to the high moisture-associated typical rheology and the changeable and harsh processing conditions in the production process, packaging materials for meat products have higher requirements including a sufficient mechanical strength and proper ductility. Collagen, a highly conserved structural protein consisting of a triple helix of Gly-X-Y repeats, has been proved to be suitable packaging material for meat products. The treated animal digestive tract (i.e. the casing) is the perfect natural packaging material for wrapping meat into sausage. Its thin walls, strong toughness and impact resistance make it the oldest and best edible meat packaging. Collagen casing is another wisdom of meat packaging, which is made by collagen fibers from hide skin, presenting a rapid growth in casing market. To strengthen mechanical strength and barrier behaviors of collagen-based packaging materials, different physical, chemical, and biological cross-linking methods are springing up exuberantly, as well as a variety of reinforcement approaches including nanotechnology. In addition, the rapid development of biomimetic technology also provides a good research idea and means for the promotion of collagen's assembly and relevant mechanical properties. This review can offer some reference on fundamental theory and practical application of collagenous materials in meat products.

Polyphenols and polyphenols-based biopolymer materials: Regulating iron absorption and availability from spontaneous to controllable.

Iron is an important trace element in the body, and it will seriously affect the body's normal operation if it is taken too much or too little. A large number of patients around the world are suffering from iron disorders. However, there are many problems using drugs to treat iron overload and causing prolonged and unbearable suffering for patients. Controlling iron absorption and utilization through diet is becoming the acceptable, safe and healthy method. At present, many literatures have reported that polyphenols can interact with iron ions and can be expected to chelate iron ions, depending on their types and structures. Besides, polyphenols often interact with other macromolecules in the diet, which may complicate this phenols-Fe behavior and give rise to the necessity of building phenolic based biopolymer materials. The biopolymer materials, constructed by self-assembly (non-covalent) or chemical modification (covalent), show excellent properties such as good permeability, targeting, biocompatibility, and high chelation ability. It is believed that this review can greatly facilitate the development of polyphenols-based biopolymer materials construction for regulating iron and improving the well-being of patients.

Property of mud and its application in cosmetic and medical fields: a review.

Mud is a semi-colloidal substance formed by the mixture of inorganic, organic and water under the influence of various physical and chemical factors through geological and biological processes. The chemical composition of mud is complex, rich in Ca2+, Zn2+, Mg2+, Na+ and other mineral elements, also contains organic matter such as humic acid, fulvic acid and acetic acid. In cosmetic field, mud can improve the activity of glutathione enzyme and superoxide dismutase in skin, which helps the skin anti-aging. Besides, it also can improve the skin microbial community, due to its distinctively physical properties, mineral ions, microorganisms, etc. In medical field, mud can treat osteoarthritis, especially knee osteoarthritis which has been studied extensively, and it can also increase the chemotaxis of macrophages. On the one hand, the use of clay (a kind of refined mud) can protect the gastrointestinal tract and treat some gastrointestinal diseases. On the other hand, clay is often used as carriers or composites in drug delivery, especially in skin drug delivery, showing very positive results. The purpose of this review is to present an overview of current knowledge about the application of mud in cosmetic and medical fields and to provide ideas for further research in mud.

An effective enzymatic assay for pH selectively measuring direct and total bilirubin concentration by using of CotA.

In this study, we aimed to develop B. subtilis spore coat protein A (CotA) for the enzymatic determination of bilirubin. Firstly, molecular docking and oxidation kinetic analysis confirmed the feasibility of CotA for oxidizing bilirubin. Secondly, CotA showed pH-preferable oxidization performance to direct bilirubin (DB) in acidic conditions and an alkaline-catalytic oxidation capacity to total bilirubin (TB). Mechanism analysis results confirm that the conformational changes of CotA, DB and UB caused by pH changes are responsible for the selective oxidation of DB and TB by CotA. Then, CotA exhibits better structural characteristics and enzymatic performance than M. verrucaria-derived bilirubin oxidase (Mv-BOD). Besides, the strong anti-interference ability helps CotA adapt to complex catalytic environment in the detection of DB and TB. Our results prove that CotA can be used as a promising candidate bio-enzymatic detection reagent for DB and TB.

Enhancing the functional characteristics of soy protein isolate via cross-linking catalyzed by Bacillus subtilis transglutaminase.

BACKGROUND: Although Streptomyces mobaraense transglutaminase (MTG) has been extensively applied to enhance the functional characteristics of soy protein isolate (SPI) through cross-linking, various transglutaminases (TGs) in nature may provide more choice in the food industry. Previous research reported that TG derived from Bacillus subtilis (BTG) exhibited better pH stability and thermostability than MTG. RESULTS: An attempt was made to study the influence of BTG induced cross-linking on the properties of SPI. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) results indicated that almost all protein constituents (α', α, ß, AS, and BS) in SPI could be cross-linked with BTG treatment. The BTG treatment also resulted in a significant increase (*P < 0.05) in SPI mean particle size. Emulsifying activity and stability were improved from 0.11535 m2  g-1 and 48.3% for native SPI to 0.13252 m2  g-1 and 83.9% for SPI treated with BTG at 6 h. Similarly, the modified SPI showed better foam activity (1.32 mL) and stability (87.6%) than the original SPI (0.93 mL and 56.8%). The water-holding capacity of SPI gel was found to increase with time, with a value of 95.43% at 6 h. Furthermore, SPI gel's texture profiles were greatly improved by adding BTG (*P < 0.05). CONCLUSION: The results of the present study indicated that BTG could be a promising cross-linking agent for improving the functional characteristics of SPI. As a substitute for MTG, BTG could thus potentially be used for food structure engineering to enhance the functional characteristics of multiple proteins to advance the development of food chemistry. © 2020 Society of Chemical Industry.

O/W Pickering emulsions stabilized by Flammulina velutipes polysaccharide nanoparticles as a fat substitute: the effects of phase separation on emulsified sausage's techno-functional and sensory quality.

BACKGROUND: The application of Pickering emulsion stabilized by food-derived particles is of great interest in the food field, including meat processing. However, the creaming phenomenon is a thorny problem and may impact the resulting product quality. Here, we used polysaccharide nanoparticles from Flammulina velutipes (FVPN) as a stabilizer to prepare a oil/water Pickering emulsion and partly replace the original fat of common emulsified sausage, focusing on exploring the influence of phase separation on the sausage's techno-functional and sensory quality, with the aim of developing a new alternative fat substitute. RESULTS: Reformulated sausages showed increases in moisture (53.24-64.85%) and protein content (11.97-12.76%), but were reduced in fat content (27.28-18.76%). The increased FPOE (FVPN-palm oil emulsion; substitution rate 5-37%) amount in sausages resulted in significantly reduced (P < 0.05) cooking loss (18.87-8.63%). Meanwhile, emulsion improved the springiness and cohesiveness of sausage and significantly reduced (P < 0.05) hardness and chewiness when the replacement amount was less than 20%. Experimental sausages attained a more compact pore structure without harming sensory characteristics. Compared with creaming emulsion, pristine emulsion resulted in a sausage with higher moisture content, lower cooking loss, better elasticity and denser structure. CONCLUSION: The characteristics of sausages could be influenced by emulsion stability. Emulsion, especially with no creaming, can be effectively used as fat substitute at a level of 20% or less without adversely affecting the sensory characteristics of emulsified sausages. The incorporation of FPOE provides the potential for developing a new alternative approach for animal fat improvement in meat products. © 2019 Society of Chemical Industry.

Fabrication and physicochemical and antibacterial properties of ethyl cellulose-structured cinnamon oil oleogel: relation between ethyl cellulose viscosity and oleogel performance.

BACKGROUND: Edible packaging and coating with natural antimicrobials such as essential oils is an emerging technology for the control of pathogen growth in meat products. This study aimed to explore ethyl cellulose (EC) of three viscosities for the structuring of cinnamon essential oil (CEO), and investigated the physicochemical properties of the resulting oleogel and its emulsion, as well as the corresponding antibacterial activity in model and actual environments (as in sausages). RESULTS: The network structure of CEO-EC oleogel was more compact with increased EC viscosity, thereby improving the binding capacity and stability of the oil. A positive correlation was found between EC viscosity and particle size of the CEO-EC emulsion. The 45 cP CEO-EC emulsion exhibited greatest antimicrobial activitiy in models with Escherichia coli (E. coli) O157:H7 (ATCC 700927) and Staphylococcus aureus (S. aureus) (ATCC 29213), as well as in sausage, with respect to total counts of mesophilic bacteria, psychrotrophs, lactobacilli, and pseudomonads. CONCLUSION: The CEO-EC oleogel has antibacterial activity, determined by the EC viscosity, that provide potential antibacterial protection for meat products and might be especially suitable for some traditional Chinese ready-to-eat sausages without strictly sealed packaging. © 2019 Society of Chemical Industry.