Biology of tongue coating in different disease stages of RA and its value in disease progression.

OBJECTIVE: To assess and compare the composition of tongue coating microbiota among patients at different stages of rheumatoid arthritis (RA). METHODS: A total of 47 patients diagnosed with RA, as per the American College of Rheumatology criteria, and 10 healthy individuals were enrolled in this study. The RA patients were stratified considering their Disease Activity Score 28 (DAS28), a composite measure based on the 28 tender and swollen joint count and erythrocyte sedimentation rate (ESR). The study population was further categorized into active phase group (LMH group) and inactive phase group (RE group) according to their DAS28 values. DNA extraction was extracted from tongue coating samples. Subsequently, the V3-V4 16S rDNA region was selectively amplified and sequenced through high-throughput 16S rDNA analysis. The resulting data were then utilized to ascertain the microbial contents. RESULTS: Significant variations were observed in the tongue coating microbiota of patients with RA during active and inactive phases, in comparison to healthy individuals (p < 0.05). At the genus level, the presence of Prevotellan, Veillonella, Rothia, and Neisseria in RA patients was notably more evident than in the healthy control (HC) group. These disparities find support in existing research on gut and oral microbiota. During the active phase of RA, the relative abundance of Veillonella, Rothia, and Neisseria in the tongue coating microbiota of patients was significantly higher than in those with inactive RA. These findings underscore the need for further and in-depth research on the potential impact of these microorganisms on the progression of RA disease. CONCLUSION: The results substantiate the hypothesis that tongue coating microbes actively contribute to the progression of RA.

Continuous tuning of pulse parameters in a soliton fiber laser by adjusting the effect of nonlinear polarization rotation: publisher's note.

This publisher's note contains a correction to Opt. Lett.49, 674 (2024)10.1364/OL.509981.

Continuous tuning of pulse parameters in a soliton fiber laser by adjusting the effect of nonlinear polarization rotation.

We demonstrate that through inserting a short length of highly birefringent small-core photonic crystal fiber (Hi-Bi SC-PCF) into a soliton fiber laser, the nonlinear polarization rotation effect in this laser can be manipulated, leading to continuous tuning of the output pulse parameters. In experiments, we observed that by adjusting the polarization state of light launched into the Hi-Bi SC-PCF and varying the cavity attenuation, the laser spectral width can be continuously tuned from ∼7.1 to ∼1.7 nm, corresponding to a pulse-width-tuning range from ∼350 fs to ∼1.56 ps. During the parameter tuning, the output pulses strictly follow the soliton area theory, giving an almost constant time-bandwidth-product of ∼0.31. This soliton fiber laser, being capable of continuous parameter tuning, could be applied as the seed source in ultrafast laser systems and may find some applications in nonlinear-optics and soliton-dynamics experiments.

GHz-rate 57-fs acousto-optic mode-locking fiber laser based on cascaded all-fiber pulse compression.

We demonstrate a compact ultrafast fiber laser system that can deliver 1.87 GHz pulse train at 1550 nm with a pulse energy of 52 pJ and an ultrashort pulse duration of 57 fs. While an acousto-optic mode-locking fiber laser was used as the seed light source at GHz rate, a stage of Er-doped fiber amplifier boosted the laser power to ∼320 mW, giving a pulse energy of ∼170 pJ. Then, a pulse compression setup was constructed, providing a high compression ratio of ∼10 with a total efficiency of ∼32%. In the cascaded compression configuration, multiple fiber samples with alternately normal and anomalous dispersion were fused together, providing efficient nonlinear spectral broadening while suppressing excessive pulse broadening over propagation. This GHz-rate ultrafast fiber laser, with compact configuration, broad optical spectrum, and high time-resolving ability could be used as the seed light source for constructing high-rate, high-power ultrafast laser systems and may find a few applications in optical measurements and microwave photonics.

Combination of transcriptome and Mendelian inheritance reveals novel prognostic biomarker of CTLA-4-related lncRNAs and protective role of nitrogen metabolism pathway in lung adenocarcinoma development.

OBJECTIVE: Since in the cancer setting, tumor cells may use cytotoxic T-lymphocyte-associated protein 4 (CTLA-4) to evade the immune system. This study aimed to identify CTLA-4-related long non-coding RNAs (lncRNAs) and assess their roles in lung adenocarcinoma (LUAD) development. METHODS: Clinical and genomic data were obtained from The Cancer Genome Atlas (TCGA), MSigDB and Gene Weaver. CTLA-4-related lncRNA-based gene signatures (CTLA4LncSigs) were identified using Cox regression, establishing a risk score model and an independent prognostic model. Enrichment analysis (GO/KEGG) was performed. Mendelian randomization (MR) analysis investigated the nitrogen metabolism and lung cancer relationship, with Bayesian weighted MR (BWMR) addressing uncertainties. Correlations with tumor microenvironment and drug sensitivity were explored. RESULTS: Nineteen CTLA4LncSigs significantly influenced LUAD prognosis. The risk score demonstrated independence as a prognostic factor. Functional analysis revealed lncRNAs' impact on nitrogen metabolism. MR and BWMR confirmed the protective role of the nitrogen metabolism pathway in lung cancer. CONCLUSION: Our study identifies CTLA-4-related lncRNAs associated with LUAD prognosis and uncovers a previously undiscovered protective role of the nitrogen metabolism pathway in combating LUAD development, providing new insights into potential therapeutic targets and prognostic biomarkers for this aggressive cancer subtype.

Specific plasma microRNA profiles could be potential non-invasive biomarkers for biochemical pregnancy loss following embryo transfer.

BACKGROUND: Plasma microRNAs act as biomarkers for predicting and diagnosing diseases. Reliable non-invasive biomarkers for biochemical pregnancy loss have not been established. We aim to analyze the dynamic microRNA profiles during the peri-implantation period and investigate if plasma microRNAs could be non-invasive biomarkers predicting BPL. METHODS: In this study, we collected plasma samples from patients undergoing embryo transfer (ET) on ET day (ET0), 11 days after ET (ET11), and 14 days after ET (ET14). Patients were divided into the NP (negative pregnancy), BPL (biochemical pregnancy loss), and CP (clinical pregnancy) groups according to serum hCG levels at day11~14 and ultrasound at day28~35 following ET. MicroRNA profiles at different time-points were detected by miRNA-sequencing. We analyzed plasma microRNA signatures for BPL at the peri-implantation stage, we characterized the dynamic microRNA changes during the implantation period, constructed a microRNA co-expression network, and established predictive models for BPL. Finally, the sequencing results were confirmed by Taqman RT-qPCR. RESULTS: BPL patients have distinct plasma microRNA profiles compared to CP patients at multiple time-points during the peri-implantation period. Machine learning models revealed that plasma microRNAs could predict BPL. RT-qPCR confirmed that miR-181a-2-3p, miR-9-5p, miR-150-3p, miR-150-5p, and miR-98-5p, miR-363-3p were significantly differentially expressed between patients with different reproductive outcomes. CONCLUSION: Our study highlights the non-invasive value of plasma microRNAs in predicting BPL.

Preliminary research on LncRNA ATP2B2-IT2 in neovascularization of diabetic retinopathy.

OBJECTIVE: Diabetic retinopathy (DR) is a common complication of diabetes, and recent findings have shown that long noncoding RNAs (lncRNAs) may be involved in its pathogenesis. Through bioinformatics analysis, we found that lncRNA ATP2B2-IT2 may be involved in this process. This study primarily investigated the expression of the lncRNA ATP2B2-IT2 in human retinal microvascular endothelial cells (HRMECs) under high-glucose conditions and its effects on HRMEC proliferation, migration, and neovascularization. METHODS: We used RT‒PCR to assess the expression levels of lncRNA ATP2B2-IT2 and vascular endothelial growth factor (VEGF) in HRMECs under normal glucose (5.5 mmol/L) and high glucose (30 mmol/L) conditions. HRMECs were subsequently divided into four groups: the normal glucose (NG), high glucose (HG), high glucose with lncRNA ATP2B2-IT2 silencing (HG + si-lncRNA ATP2B2-IT2), and high glucose with silencing control (HG + si-NC) groups. The expression levels of the lncRNA ATP2B2-IT2 and VEGF in each group were determined using RT‒PCR. Thereafter, cell proliferation, migration, and neovascularization were assessed using CCK-8, Transwell, and tube formation assays, respectively. RESULTS: RT‒PCR revealed that the expression levels of the lncRNA ATP2B2-IT2 and VEGF were greater in the HG group than in the NG group (P < 0.05). After silencing of the lncRNA ATP2B2-IT2, the expression of VEGF decreased significantly (P < 0.05). Subsequent CCK-8, Transwell, and tube formation assays demonstrated that compared to those in the NG group, the HRMECs in the HG group exhibited significantly increased proliferation, migration, and neovascularization (P < 0.05). However, after silencing of the lncRNA ATP2B2-IT2, the proliferation, migration, and neovascularization of HRMECs were significantly decreased in the HG + si-lncRNA ATP2B2-IT2 group compared to those in the HG group (P < 0.05). CONCLUSION: LncRNA ATP2B2-IT2 may promote the proliferation, migration and neovascularization of HRMECs under high-glucose conditions.

Structural and genetic basis for the binding of a mouse monoclonal antibody to Flavobacterium psychrophilum lipopolysaccharide.

A mouse monoclonal antibody (mAb FL100A) previously prepared against Flavobacterium psychrophilum (Fp) CSF259-93 has now been examined for binding to lipopolysaccharides (LPS) of this strain and Fp 950106-1/1. The corresponding O-polysaccharides (O-PS) of these strains are formed by identical trisaccharide repeats composed of l-Rhamnose (l-Rha), 2-acetamido-2-deoxy-l-fucose (l-FucNAc) and 2-acetamido-4-R1-2,4-dideoxy-d-quinovose (d-Qui2NAc4NR1) where R1 represents a dihydroxyhexanamido moiety. The O-PS loci of these strains are also identical except for the gene (wzy1 or wzy2) that encodes the polysaccharide polymerase. Accordingly, adjacent O-PS repeats are joined through d-Qui2NAc4NR1 and l-Rha by wzy2-dependent α(1-2) linkages in Fp CSF259-93 versus wzy1-dependent ß(1-3) linkages in Fp 950106-1/1. mAb FL100A reacted strongly with Fp CSF259-93 O-PS and LPS but weakly or not at all with Fp 950106-1/1 LPS and O-PS. Importantly, it also labelled cell surface blebs on the former but not the latter strain. Additionally, mAb binding was approximately 5-times stronger to homologous Fp CSF259-93 LPS than to LPS from a strain with a different R-group gene. A conformational epitope for mAb FL100A binding was suggested from molecular dynamic simulations of each O-PS. Thus, Fp CSF259-93 O-PS formed a stable well-defined compact helix in which the R1 groups were displayed in a regular pattern on the helix exterior while unreactive Fp 950106-1/1 O-PS adopted a flexible extended linear conformation. Taken together, the findings establish the specificity of mAb FL100A for Wzy2-linked F. psychrophilum O-PS and LPS.

Experiences of Chinese Rheumatoid Arthritis Patients Who Chose Western Medicine, Traditional Chinese Medicine, and a Combination of Treatments: A Study Based on Interviews and Thematic Analysis.

Background: This qualitative study, part of a prospective mixed-methods research, aimed to gain insights into the medical experiences and disease perceptions of Chinese patients living with rheumatoid arthritis (RA). Specifically, the study examined how RA patients' perceptions of their disease were influenced by the diagnosis and treatment they receive. Methods: RA patients undergoing treatment were invited to participate in this qualitative study. Face-to-face semi-structured interviews were conducted among 18 patients, and the collected data were analyzed using thematic analysis. Results: The 18 participants in this study had a mean (SD) age of 58, a median disease duration of 6.5 years, and a predominance of female subjects (17 out of 18). The qualitative analysis identified two themes with six sub-themes: 1. Patients' experiences of treatment: discovery of the disease, misdiagnosis and mistreatment, and patients' treatment choices; 2. Feelings about the disease: psychological impact, reflections on the disease, and expectations of treatment. Conclusion: This study provides valuable perspectives and data to enhance the understanding of the relationship between patients' illness perceptions and their healthcare choices.

Does Inter-Residue Hydrogen Bonding in ß-(1→4)-Linked Disaccharides Influence Linkage Conformation in Aqueous Solution?

Two disaccharides, methyl ß-d-galactopyranosyl-(1→4)-α-d-glucopyranoside (1) and methyl ß-d-galactopyranosyl-(1→4)-3-deoxy-α-d-ribo-hexopyranoside (3), were prepared with selective 13C-enrichment to allow measurement of six trans-O-glycosidic J-couplings (2JCOC, 3JCOCH, and 3JCOCC) in each compound. Density functional theory (DFT) was used to parameterize Karplus-like equations that relate these J-couplings to either ϕ or ψ. MA'AT analysis was applied to both linkages to determine mean values of ϕ and ψ in each disaccharide and their associated circular standard deviations (CSDs). Results show that deoxygenation at C3 of 1 has little effect on both the mean values and librational motions of the linkage torsion angles. This finding implies that, if inter-residue hydrogen bonding between O3H and O5' of 1 is present in aqueous solution and persistent, it plays little if any role in dictating preferred linkage conformation. Hydrogen bonding may lower the energy of the preferred linkage geometry but does not determine it to any appreciable extent. Aqueous 1-µs MD simulation supports this conclusion and also indicates greater conformational flexibility in deoxydisaccharide 3 in terms of sampling several, conformationally distinct, higher-energy conformers in solution. The populations of these latter conformers are low (3-14%) and could not be validated by MA'AT analysis. If the MD model is correct, however, C3 deoxygenation does enable conformational sampling over a wider range of ϕ/ψ values, but linkage conformation in the predominant conformer is essentially identical in both 1 and 3.

Selenium-modified activated coke: a high-capacity and facile designed Hg0 adsorbent for coal-fired flue gas.

The substantial amount of mercury emissions from coal-fired flue gas causes severe environmental contamination. With the Minamata Convention now officially in force, it is critical to strengthen mercury pollution control. Existing activated carbon injection technologies suffer from poor desulfurization performance and risk secondary-release risks. Therefore, considering the potential industrial application of adsorbents, we selected cost-effective and readily available activated coke (AC) as the carrier in this study. Four metal selenides-copper, iron, manganese, and tin-were loaded onto the AC to overcome the application problems of existing technologies. After 120 min of adsorption, the CuSe/AC exhibited the highest efficiency in removing Hg0, surpassing 80% according to the experimental findings. In addition, the optimal adsorption temperature window was 30-120 °C, the maximum adsorption rate was 2.9 × 10-2 mg·g-1·h-1, and the effectiveness of CuSe/AC in capturing Hg0 only dropped by 5.2% in the sulfur-containing atmosphere. The physicochemical characterization results indicated that the AC surface had a uniform loading of CuSe with a nanosheet structure resembling polygon and that the Cu-to-Se atomic ratio was close to 1:1. Finally, two possible Hg0 reaction pathways on CuSe/AC were proposed. Moreover, it was elucidated that the highly selective binding of Hg0 with ligand-unsaturated Se- was the key factor in achieving high adsorption efficiency and sulfur resistance in the selenium-functionalized AC adsorbent. This finding offers substantial theoretical support for the industrial application of this adsorbent.