Rational Design of F-Modified Polyester Electrolytes for Sustainable All-Solid-State Lithium Metal Batteries.

Solid polymer electrolytes (SPEs) are one of the most practical candidates for solid-state batteries owing to their high flexibility and low production cost, but their application is limited by low Li+ conductivity and a narrow electrochemical window. To improve performance, it is necessary to reveal the structure-property relationship of SPEs. Here, 23 fluorinated linear polyesters were prepared by editing the coordination units, flexible linkage segments, and interface passivating groups. Besides the traditionally demonstrated coordinating capability and flexibility of polymer chains, the molecular asymmetry and resulting interchain aggregation are observed critical for Li+ conductivity. By tailoring the molecular asymmetry and coordination ability of polyesters, the Li+ conductivity can be raised by 10 times. Among these polyesters, solvent-free poly(pentanediol adipate) delivers the highest room-temperature Li+ conductivity of 0.59 × 10-4 S cm-1. The chelating coordination of oxalate and Li+ leads to an electron delocalization of alkoxy oxygen, enhancing the antioxidation capability of SPEs. To lower the cost, high-value LiTFSI in SPEs is recycled at 90%, and polyesters can be regenerated at 86%. This work elucidates the structure-property relationship of polyester-based SPEs, displays the design principles of SPEs, and provides a way for the development of sustainable solid-state batteries.

Stereoselective Crystallization of Chiral Pharmaceuticals Aided by Cellulose Derivatives through Helical Pattern Matching.

Stereoselective inhibition aided by "tailor-made" polymeric additives is an efficient approach to obtain enantiopure compounds through conglomerate crystallization. The chemical and configurational match between the side groups of polymers and the molecules of undesired enantiomer is considered to be a necessary condition for successful stereoseparation. Whereas in this contribution, we present an effective resolution of chiral pharmaceuticals by using cellulose acetates as the additives, which stereoselectively reside on the specific crystal faces of one enantiomer and inhibit its crystal nucleation and growth through helical pattern and supramolecular interaction complementarity. An investigation of nimodipine serves as a case study to highlight the novelty of this strategy wherein R-crystals exhibiting an impressive enantiomeric excess value of 97% can be attained by employing a mere 0.01 wt% cellulose acetate. Guaifenesin and phenyl lactic acid are also well-resolved by utilizing this methodology. Our work not only brings about a brand-new design strategy for "tailor-made" additives, but will also promote the further exploration of the endless potential for utilizing natural biomolecules in chiral recognition and resolution.

Dormancy and double-activation strategy for construction of high-performance mixed-matrix membranes.

Mixed-matrix membranes (MMMs) have the potential for energy-efficient gas separation by matching the superior mass transfer and anti-plasticization properties of the fillers with processability and scaling up features of the polymers. However, construction of high-performance MMMs has been prohibited due to low filler-loading and the existence of interfacial defects. Here, high MOF-loaded, i.e., 55 wt %, MMMs are developed by a 'dormancy and double-activation' (DDA) strategy. High MOF precursor concentration suppresses crystallization in the membrane casting solution, realizing molecular level mixing of all components. Then, the polymeric matrix was formed with uniform encapsulation of MOF nutrients. Subsequently, double-activation was employed to induce MOF crystallization: the alkali promotes MOFs nucleation to harvest small porous nanocrystals while excessive ligands activate the metal ions to enhance the MOFs conversion. As such, quasi-semi-continuous mass transfer channels can be formed in the MMMs by the connected MOFs nanocrystals to boost the gas permeability. The optimized MMM shows significantly ameliorated CO2 permeability, i.e., 2841 Barrer, five-fold enhancement compared with pristine polymer membrane, with a good CO2 /N2 selectivity of 36. Besides, the nanosized MOFs intensify their interaction with polymer chains, endowing the MMMs with good anti-plasticization behaviour and stability, which advances practical application of MMMs in carbon capture.

Confining Water Nanotubes in a Cu10O13-Based Metal-Organic Framework for Propylene/Propane Separation with Record-High Selectivity.

Energy-efficient separation of propylene (C3H6)/propane (C3H8) is in high demand for the chemical industry. However, this process is challenging due to the imperceptible difference in molecular sizes of these gases. Here, we report a continuous water nanotube dedicatedly confined in a Cu10O13-based metal-organic framework (MOF) that can exclusively adsorb C3H6 over C3H8 with a record-high selectivity of 1570 (at 1 bar and 298 K) among all the porous materials. Such a high selectivity originates from a new mechanism of initial expansion and subsequent contraction of confined water nanotubes (∼4.5 Å) caused by C3H6 adsorption rather than C3H8. Such unique response was further confirmed by breakthrough measurements, in which one adsorption/desorption cycle yields each component of the binary mixture high purity (C3H6: 98.8%; C3H8: >99.5%) and good C3H6 productivity (1.6 mL mL-1). Additionally, benefiting from the high robustness of the framework, the water nanotubes can be facilely recovered by soaking the MOF in water, ensuring long-term use. The molecular insight here demonstrates that the confining strategy opens a new route for expanding the function of MOFs, particularly for the sole recognition from challenging mixtures.

Rapid Fabrication of High-Permeability Mixed Matrix Membranes at Mild Condition for CO2 Capture.

Mixed matrix membranes (MMMs), conjugating the advantages of flexible processing-ability of polymers and high-speed mass transfer of porous fillers, are recognized as the next-generation high-performance CO2 capture membranes for solving the current global climate challenge. However, controlling the crystallization of porous metal-organic frameworks (MOFs) and thus the close stacking of MOF nanocrystals in the confined polymer matrix is still undoable, which thus cannot fully utilize the superior transport attribute of MOF channels. In this study, the "confined swelling coupled solvent-controlled crystallization" strategy is employed for well-tailoring the in-situ crystallization of MOF nanocrystals, realizing rapid (<5 min) construction of defect-free freeway channels for CO2 transportation in MMMs due to the close stacking of MOF nanocrystals. Consequently, the fabricated MMMs exhibit approximately fourfold enhancement in CO2 permeability, i.e., 2490 Barrer with a CO2 /N2 selectivity of 37, distinctive antiplasticization merit, as well as long-term running stability, which is at top-tier level, enabling the large-scale manufacture of high-performance MMMs for gas separation.

Self-Assembly and In Situ Quaternization of Triblock Bottlebrush Block Copolymers via Organized Spontaneous Emulsification for Effective Loading of DNA.

Microspheres bearing large pores are useful in the capture and separation of biomolecules. However, pore size is typically poorly controlled, leading to disordered porous structures with limited performances. Herein, ordered porous spheres with a layer of cations on the internal surface of the nanopores are facilely fabricated in a single step for effective loading of DNA bearing negative charges. Triblock bottlebrush copolymers (BBCPs), (polynorbornene-g-polystyrene)-b-(polynorbornene-g-polyethylene oxide)-b-(polynorbornene-g-bromoethane) (PNPS-b-PNPEO-b-PNBr), are designed and synthesized for fabrication of the positively charged porous spheres through self-assembly and in situ quaternization during an organized spontaneous emulsification (OSE) process. Pore diameter as well as charge density increase with the increase of PNBr content, resulting in a significant increase of loading density from 4.79 to 22.5 ng µg-1 within the spheres. This work provides a general strategy for efficient loading and encapsulation of DNA, which may be extended to a variety of different areas for different real applications.

Influencing Factors on Li-ion Conductivity and Interfacial Stability of Solid Polymer Electrolytes, Exampled by Polycarbonates, Polyoxalates and Polymalonates.

The application of solid polymer electrolytes (SPEs) in all-solid-state(ASS) batteries is hindered by lower Li+ -conductivity and narrower electrochemical window. Here, three families of ester-based F-modified SPEs of poly-carbonate (PCE), poly-oxalate (POE) and poly-malonate (PME) were investigated. The Li+ -conductivity of these SPEs prepared from pentanediol are all higher than the counterparts made of butanediol, owing to the enhanced asymmetry and flexibility. Because of stronger chelating coordination with Li+ , the Li+ -conductivity of PME and POE is around 10 and 5 times of PCE. The trifluoroacetyl-units are observed more effective than -O-CH2 -CF2 -CF2 -CH2 -O- during the in situ passivation of Li-metal. Using trifluoroacetyl terminated POE and PCE as SPE, the interfaces with Li-metal and high-voltage-cathode are stabilized simultaneously, endowing stable cycling of ASS Li/LiNi0.6 Co0.2 Mn0.2 O2 (NCM622) cells. Owing to an enol isomerization of malonate, the cycling stability of Li/PME/NCM622 is deteriorated, which is recovered with the introduce of dimethyl-group in malonate and the suppression of enol isomerization. The coordinating capability with Li+ , molecular asymmetry and existing modes of elemental F, are all critical for the molecular design of SPEs.

Cu Nanoclusters Anchored on the Metal-Organic Framework for the Hydrolysis of Ammonia Borane and the Reduction of Quinolines.

Free-access active sites created and the interaction regulated between them and substrates during the heterogeneous catalysis process are crucial, which remain a great challenge. In this work, in suit reduced to afford naked Cu nanoparticles (NPs) have been anchored on the metal-organic framework (MOF), NH2-MOF, to form Cu-NH2-MOF. The strategy can precisely control the Cu NP formation with small size and uniform distribution. The Cu NP properties and MOF advantages have been integrated to create a great catalyst with multiple functions and have resulted in improving the recyclability and superb catalytic activity for the one-pot reduction of heterocycle reactions under mild conditions. The experimental and theoretical calculation results show that the superior performance should be attributed to the framework of NH2-MOF that provides large caves for substrate enrichment and the stabilization of Cu sites by the -NH2 group.

Highly Efficient and Chemoselective Hydrogenation of Nitro Compounds into Amines by Nitrogen-Doped Porous Carbon-Supported Co/Ni Bimetallic Nanoparticles.

A novel Co/Ni bimetallic nanoparticle supported by nitrogen-doped porous carbon (NPC), Co5/Ni@NPC-700, exhibits high conversion, chemoselectivity, and recyclability in the hydrogenation of 16 different nitro compounds into desired amines with hydrazine hydrate under mild conditions. The synergistic effects of Co/Ni bimetal nanoparticles and the NPC-supported porous honeycomb structure with more accessible active sites may be responsible for the high catalytic hydrogenation performance.

Noncovalently Functionalized Commodity Polymers as Tailor-Made Additives for Stereoselective Crystallization.

Stereoselective inhibition of the nucleation and crystal growth of one enantiomer aided by "tailor-made" polymeric additives is an efficient method to obtain enantiopure compounds. However, the conventional preparation of polymeric additives from chiral monomers are laborious and limited in structures, which impedes their rapid optimization and applicability. Herein, we report a "plug-and-play" strategy to facilitate synthesis by using commercially available achiral polymers as the platform to attach various chiral small molecules as the recognition side-chains through non-covalent interactions. A library of supramolecular polymers made up of two vinyl polymers and six small molecules were applied with seeds in the selective crystallization of seven racemates in different solvents. They showed good to excellent stereoselectivity in yielding crystals with high enantiomeric purities in conglomerates and racemic compound forming systems. This convenient, low-cost modular synthesis strategy of polymeric additives will allow for high-efficient, economical resolution of various racemates on different scales.

Fluorinated Poly-oxalate Electrolytes Stabilizing both Anode and Cathode Interfaces for All-Solid-State Li/NMC811 Batteries.

The relatively narrow electrochemical steady window and low ionic conductivity are two critical challenges for Li+ -conducting solid polymer electrolytes (SPE). Here, a family of poly-oxalate(POE) structures were prepared as SPE; among them, POEs composed from diols with an odd number of carbons show higher ionic conductivity than those composed from diols with an even number of carbons, and the POE composed from propanediol (C5-POE) has the highest Li+ conductivity. The HOMO (highest occupied molecular orbital) electrons of POE were found located on the terminal units. When using trifluoroacetate as the terminating unit (POE-F), not only does the HOMO become more negative, but also the HOMO electrons shift to the middle oxalate units, improving the antioxidative capability. Furthermore, the interfacial compatibility across the Li-metal/POE-F is also improved by the generation of a LiF-based solid-electrolyte-interlayer(SEI). With the trifluoroacetate-terminated C5-POE (C5-POE-F) as the electrolyte and Li+ -conducting binder in the cathode, the all-solid-state Li/LiNi0.8 Mn0.1 Co0.1 O2 (NMC811) cells showed significantly improved stability than the counterpart with poly-ether, providing a promising candidate for the forthcoming all-solid-state high-voltage Li-metal batteries.

In vivo biological safety evaluation of an iron-based bioresorbable drug-eluting stent.

Bioresorbable stents (BRS) are investigated and designed to revascularize occluded arteries. The iron-based bioresorbable stent is a promising device in interventional therapies, although it's corrosion and bioresorption rate remain challenging. In this work, we introduced a novel nitrided iron coronary stent (IBS) with enhanced degradation rate compared with pure iron stent. To evaluate the biosafety of this device, a sub-chronic systemic toxicity study was conducted and a stainless steel stent (Supporter™) served as a control. Here, the bioresorbable stent was first evaluated in rat abdominal aortic implantation model. When subjected to exaggerated exposure dose, no clinical signs of toxicity or mortality were observed in either, the IBS group or the control group. Histopathological examinations showed the corrosion particles of iron were encapsulated by fibrocytes and engulfed by macrophages, indicating that the degradation of iron was in the early stage. Our results demonstrated that the nitrided iron stent did not induce systemic toxicity under the experimental conditions.

A new type of halogen bond involving multivalent astatine: an ab initio study.

Theoretical studies on the dimers formed by CO with the halides of multivalent astatine as a Lewis-acid center are carried out to examine the typical characteristics of supervalent halogen bonds. Calculations at the MP2/aug-cc-pVTZ level reveal that the multiple nucleophilic sites of multivalent halide monomers can promote the formation of various types of halogen bonds, among which the most stable ones are At-halogen bond complexes with multivalent astatine as a Lewis acid center, followed by the π-halogen bond dimers, and the weakest ones are the X-halogen bonds. Compared with multivalent Cl-, Br-, and I-centers, At, as the heaviest halogen, exhibits the highest halogen-bond donating ability. We found that the electrostatic term and the dispersion term play an important role in the overall attractive interaction energy, and the smallest attraction term for all complexes is the polarization term (ΔEpol). Moreover, the tri and pentavalent halides analyzed here possess very "flexible" tautomerism in which the transformation occurs during the formation of the dimers. AIM theory and NBO analysis are also employed here.

A theoretical investigation on Cu/Ag/Au bonding in XH2P⋯MY(X = H, CH3, F, CN, NO2; M = Cu, Ag, Au; Y = F, Cl, Br, I) complexes.

Intermolecular interaction of XH2P···MY (X = H, CH3, F, CN, NO2; M = Cu, Ag, Au; Y = F, Cl, Br, I) complexes was investigated by means of an ab initio method. The molecular interaction energies are in the order Ag < Cu < Au and increased with the decrease of RP···M. Interaction energies are strengthened when electron-donating substituents X connected to XH2P, while electron-withdrawing substituents produce the opposite effect. The strongest P···M bond was found in CH3H2P···AuF with -70.95 kcal/mol, while the weakest one was found in NO2H2P···AgI with -20.45 kcal/mol. The three-center/four-electron (3c/4e) resonance-type of P:-M-:Y hyperbond was recognized by the natural resonance theory and the natural bond orbital analysis. The competition of P:M-Y ↔ P-M:Y resonance structures mainly arises from hyperconjugation interactions; the bond order of bP-M and bM-Y is in line with the conservation of the idealized relationship bP-M + bM-Y ≈ 1. In all MF-containing complexes, P-M:F resonance accounted for a larger proportion which leads to the covalent characters for partial ionicity of MF. The interaction energies of these Cu/Ag/Au complexes are basically above the characteristic values of the halogen-bond complexes and close to the observed strong hydrogen bonds in ionic hydrogen-bonded species.

Chronic Systemic Toxicity Study of Copper Intrauterine Devices in Female Wistar Rats.

BACKGROUND The aim of this study was to evaluate the chronic systemic and local toxicity of a copper intrauterine device in a rat model. MATERIAL AND METHODS Cu-IUD fragments were inserted into the uterine horns of female Wistar rats for 26 weeks (equivalent 15.42-17.33 years in humans). We tested copper at 20, 40, and 60 times the clinical dosages to study copper toxicity under severe conditions. Classic chronic systemic toxicity evaluations, including body weight, hematology, organ coefficient, and tissue reactions, were performed. RESULTS The body weight of the rats increased during the 26 weeks, which showed that the Cu-IUD implant had no effect on animal growth. Histological examinations and organ coefficients of the uterus and other major organs indicated no obvious systemic or local impairment. Blood tests confirmed that the hepatic and renal functions remained normal. CONCLUSIONS These results obtained at different dosages and long-term implantation provide solid data confirming the safety of long-term use of Cu-IUDs. However, the elevated leucocyte levels found in this study warrant further investigation.

Synthesis and fungicidal activity of novel 2-aryl-3-(1,3,4-thiadiazolyl)-6(8)-methyl-1,3-benzoxazines.

A class of novel 2-aryl-3-(1,3,4-thiadiazolyl)-6(8)-methyl-1,3-benzoxazines was prepared by reactions of 2-methyl-6-((1,3,4-thiadiazolylamino)methyl)phenols or 4-methyl-2-((1,3,4-thiadiazolylamino)methyl)phenols and 2- or 4-nitrobenzaldehyde in the presence of TMSCl in refluxing toluene. The electron-donating methyl group on the benzene ring played an essential role on the reactivity of the substituted phenols, which was proved by DFT calculation. The fungicidal activity of the resultant products were also preliminarily evaluated, most of which displayed moderate to good fungicidal activity. Especially, compound 6f showed 98.0% activity against Sclerotonia sclerotiorum and Botrytis cinerea at concentration of 25µg/mL.

S100 calcium­binding protein A16 suppresses the osteogenic differentiation of rat bone marrow mesenchymal stem cells by inhibiting SMAD family member 4 signaling.

Osteogenesis is a complex process of bone formation regulated by various factors, yet its underlying molecular mechanisms remain incompletely understood. The present study aimed to investigate the role of S100A16, a novel member of the S100 protein family, in the osteogenic differentiation of rat bone marrow mesenchymal stem cells (BMSCs) and uncover a novel Smad4-mitogen-activated protein kinase (MAPK)/Jun N-terminal kinase (JNK) signaling axis. In the present study, the expression level of S100A16 in bone tissues and BMSCs from ovariectomized rats was evaluated and then the impact of S100A16 silencing on osteogenic differentiation was examined. Increased S100A16 expression was observed in bone tissues and BMSCs from ovariectomized rats, and S100A16 silencing promoted osteogenic differentiation. Further transcriptomic sequencing revealed that the Smad4 pathway was involved in S100A16 silencing-induced osteogenesis. The results of western blot analysis revealed that S100A16 overexpression not only downregulated Smad4 but also activated MAPK/JNK signaling, which was validated by treatment with MAPK and JNK inhibitors U0126 and SP600125. Overall, in the present study, the novel regulatory factors influencing osteogenic differentiation were elucidated and mechanistic insights that could aid in the development of targeted therapeutic strategies for patients with osteoporosis were provided.

Plant Biostimulant as an Environmentally Friendly Alternative to Modern Agriculture.

Ensuring the safety of crop production presents a significant challenge to humanity. Pesticides and fertilizers are commonly used to eliminate external interference and provide nutrients, enabling crops to sustain growth and defense. However, the addition of chemical substances does not meet the environmental standards required for agricultural production. Recently, natural sources such as biostimulants have been found to help plants with growth and defense. The development of biostimulants provides new solutions for agricultural product safety and has become a widely utilized tool in agricultural. The review summarizes the classification of biostimulants, including humic-based biostimulant, protein-based biostimulant, oligosaccharide-based biostimulant, metabolites-based biostimulants, inorganic substance, and microbial inoculant. This review attempts to summarize suitable alternative technology that can address the problems and analyze the current state of biostimulants, summarizes the research mechanisms, and anticipates future technological developments and market trends, which provides comprehensive information for researchers to develop biostimulants.

Broadband converging plano-concave lens.

A plano-concave lens with source-tailored geometric profile and transformational gradient index is proposed for broadband illumination. Such a design, capable of focusing and collimating the electromagnetic fields, fulfils the functionality of a converging lens and can also achieve a steerable beam and multiple beams efficiently. Nonresonant synthesis with a perforated dielectric plate and dielectric rod arrays is demonstrated for the lensing realization, promising a wide operating frequency band in the practical implementation.

Robust small area estimation for unit level model with density power divergence.

Unit level model is one of the classical models in small area estimation, which plays an important role with unit information data. Empirical Bayesian(EB) estimation, as the optimal estimation under normal assumption, is the most commonly used parameter estimation method in unit level model. However, this kind of method is sensitive to outliers, and EB estimation will lead to considerable inflation of the mean square error(MSE) when there are outliers in the responses yij. In this study, we propose a robust estimation method for the unit-level model with outliers based on the minimum density power divergence. Firstly, by introducing the minimum density power divergence function, we give the estimation equation of the parameters of the unit level model, and obtain the asymptotic distribution of the robust parameters. Considering the existence of tuning parameters in the robust estimator, an optimal parameter selection algorithm is proposed. Secondly, empirical Bayesian predictors of unit and area mean in finite populations are given, and the MSE of the proposed robust estimators of small area means is given by bootstrap method. Finally, we verify the superior performance of our proposed method through simulation data and real data. Through comparison, our proposed method can can solve the outlier situation better.