Compression of curium pyrrolidine-dithiocarbamate enhances covalency.

Curium is unique in the actinide series because its half-filled 5f 7 shell has lower energy than other 5f n configurations, rendering it both redox-inactive and resistant to forming chemical bonds that engage the 5f shell1-3. This is even more pronounced in gadolinium, curium's lanthanide analogue, owing to the contraction of the 4f orbitals with respect to the 5f orbitals4. However, at high pressures metallic curium undergoes a transition from localized to itinerant 5f electrons5. This transition is accompanied by a crystal structure dictated by the magnetic interactions between curium atoms5,6. Therefore, the question arises of whether the frontier metal orbitals in curium(III)-ligand interactions can also be modified by applying pressure, and thus be induced to form metal-ligand bonds with a degree of covalency. Here we report experimental and computational evidence for changes in the relative roles of the 5f/6d orbitals in curium-sulfur bonds in [Cm(pydtc)4]- (pydtc, pyrrolidinedithiocarbamate) at high pressures (up to 11 gigapascals). We compare these results to the spectra of [Nd(pydtc)4]- and of a Cm(III) mellitate that possesses only curium-oxygen bonds. Compared with the changes observed in the [Cm(pydtc)4]- spectra, we observe smaller changes in the f-f transitions in the [Nd(pydtc)4]- absorption spectrum and in the f-f emission spectrum of the Cm(III) mellitate upon pressurization, which are related to the smaller perturbation of the nature of their bonds. These results reveal that the metal orbital contributions to the curium-sulfur bonds are considerably enhanced at high pressures and that the 5f orbital involvement doubles between 0 and 11 gigapascal. Our work implies that covalency in actinides is complex even when dealing with the same ion, but it could guide the selection of ligands to study the effect of pressure on actinide compounds.

Pronounced Pressure Dependence of Electronic Transitions for Americium Compared to Isomorphous Neodymium and Samarium Mellitates.

The mellitate ion is relevant in spent nuclear fuel processing and is utilized as a surrogate for studying the interactions of f elements with humic acids. A wealth of different coordination modes gives the potential for diverse structural chemistry across the actinide series. In this study, an americium mellitate, 243Am2[(C6(COO-)6](H2O)8·2H2O (1-Am), has been synthesized and characterized using structural analysis and spectroscopy at ambient and elevated pressures. 1-Am was then compared to isomorphous neodymium (1-Nd) and samarium (1-Sm) mellitates via bond-length analysis and pressure dependence of their Laporte-forbidden f → f transitions. Results show that the pressure dependence of the f → f transitions of 1-Am is significantly greater than that observed in 1-Nd and 1-Sm, with average shifts of 21.4, 4.7, and 3.6 cm-1/GPa, respectively. This greater shift found in 1-Am shows further evidence that the 5f orbitals are more affected than the 4f orbitals when pressure is applied to isostructural compounds.

Mononuclear to Polynuclear UIV Structural Units: Effects of Reaction Conditions on U-Furoate Phase Formation.

Uranium(IV) complexation by 2-furoic acid (2-FA) was examined to better understand the effects of ligand identity and reaction conditions on species formation and stability. Five compounds were isolated: [UCl2 (2-FA)2 (H2 O)2 ]n (1), [U4 Cl10 O2 (THF)6 (2-FA)2 ]⋅2 THF (2), [U6 O4 (OH)4 (H2 O)3 (2-FA)12 ]⋅7 THF⋅H2 O (3), [U6 O4 (OH)4 (H2 O)2 (2-FA)12 ]⋅8.76 H2 O (4), and [U38 Cl42 O54 (OH)2 (H2 O)20 ]⋅m H2 O⋅n THF (5). The structures were determined by single-crystal X-ray diffraction and further characterized by Raman, IR, and optical absorption spectroscopy. The thermal stability and magnetic behavior of the compounds were also examined. Variations in the synthetic conditions led to notable differences in the structural units observed in the solid state. At low H2 O/THF ratios, a tetranuclear oxo-bridged [U4 O2 ] core was isolated. Aging of this solution resulted in the formation a U38 oxo cluster capped by chloro and water ligands. However, at increasing water concentrations only hexanuclear units were observed. In all cases, at temperatures of 100-120 °C, UO2 nanoparticles formed.

Pressure-Induced Spectroscopic Changes in a Californium 1D Material Are Twice as Large as Found in the Holmium Analog.

In this study, the synthesis, characterization, and pressure response of a 1D californium mellitate (mellitate = 1,2,3,4,5,6-benzenehexacarboxylate) coordination polymer, Cf2(mell)(H2O)10·4H2O (Cf-1), are reported. The Cf-O lengths within the crystal structure are compared to its gadolinium (Gd-1) and holmium (Ho-1) analogs as well. These data show that the average Cf-O bond distance is slightly longer than the average Gd-O bond, consistent with trends in effective ionic radii. UV-vis-NIR absorption spectra as a function of pressure were collected using diamond-anvil techniques for both Cf-1 and Ho-1. These experiments show that the Cf(III) f → f transitions have a stronger dependence on pressure than that of the holmium analog. In the former case, the shift is nearly linear with applied pressure and averages 6.6 cm-1/GPa, whereas in the latter, it is <3 cm-1/GPa.

A Single Small-Scale Plutonium Redox Reaction System Yields Three Crystallographically-Characterizable Organoplutonium Complexes.

An approach to obtaining substantial amounts of data from a hazardous starting material that can only be obtained and handled in small quantities is demonstrated by the investigation of a single small-scale reaction of cyclooctatetraene, C8H8, with a solution obtained from the reduction of Cp'3Pu (Cp' = C5H4SiMe3) with potassium graphite. This one reaction coupled with oxidation of a product has provided single-crystal X-ray structural data on three organoplutonium compounds as well as information on redox chemistry thereby demonstrating an efficient route to new reactivity and structural information on this highly radioactive element. The crystal structures were obtained from the reduction of C8H8 by a putative Pu(II) complex, (Cp'3PuII)1-, generated in situ, to form the Pu(III) cyclooctatetraenide complex, [K(crypt)][(C8H8)2PuIII], 1-Pu, and the tetra(cyclopentadienyl) Pu(III) complex, [K(crypt)][Cp'4PuIII], 2-Pu. Oxidation of the sample of 1-Pu with Ag(I) afforded a third organoplutonium complex that has been structurally characterized for the first time, (C8H8)2PuIV, 3-Pu. Complexes 1-Pu and 3-Pu contain Pu sandwiched between parallel (C8H8)2- rings. The (Cp'4PuIII)- anion in 2-Pu features three η5-Cp' rings and one η1-Cp' ring, which is a rare example of a formal Pu-C η1-bond. In addition, this study addresses the challenge of small-scale synthesis imparted by radiological and material availability of transuranium isotopes, in particular that of pure metal samples. A route to an anhydrous Pu(III) starting material from the more readily available PuIVO2 was developed to facilitate reproducible syntheses and allow complete spectroscopic analysis of 1-Pu and 2-Pu. PuIVO2 was converted to PuIIIBr3(DME)2 (DME = CH3OCH2CH2OCH3) and subsequently PuIIIBr3(THF)x, which was used to independently synthesize 1-Pu, 2-Pu, and 3-Pu.

High-Pressure Studies of Cesium Uranyl Chloride.

The pressure behavior of crystalline Cs2UO2Cl4 has been explored using a diamond anvil cell. The uranyl fluorescence intensity decreases dramatically with increasing pressure. Using the O-U-O symmetric stretching frequency, an apparent linear decrease in bond length with increasing pressure was observed. A linear decrease in fluorescence intensity with increasing pressure was attributed to a large growth in the nonradiative relaxation, likely attributed to increased relaxation through phonon modes. Quantum theory of atoms in molecules calculations and ab initio wave function methods (CASSCF) support the U≡O bond in UO22+ being highly sensitive to the bond distance, but negligibly affected by the U-Cl bond length.

Examination of Structure and Bonding in 10-Coordinate Europium and Americium Terpyridyl Complexes.

M(TpyNO2)(NO3)3(H2O)·THF (M = La, Nd, Sm, Eu, Tb, Am; TpyNO2 = 4'-nitrophenyl terpyridyl) have been prepared from the reaction of M(NO3)3· nH2O with TpyNO2 in THF. Structural analysis shows that the metal centers are 10-coordinate, providing the first example of AmIII with this coordination number. Further spectroscopic and theoretical evaluation of these complexes reveals utilization of the 5f orbitals in bonding in the AmIII complex. Comparison of Nd-L, Eu-L, and Am-L bond distances demonstrates that some caution should be taken in comparing EuIII versus AmIII in extraction experiments.

Axial Ligand Coordination to the C-H Amination Catalyst Rh2(esp)2: A Structural and Spectroscopic Study.

The compound Rh2(esp)2 (esp = α,α,α',α'-tetramethyl-1,3-benzenediproponoate) is the most generally effective catalyst for nitrenoid amination of C-H bonds. However, much of its fundamental coordination chemistry is unknown. In this work, we study the effects of axial ligand coordination to the catalyst Rh2(esp)2. We report here crystal structures, cyclic voltammetry, UV-vis, IR, Raman, and (1)H NMR spectra for the complexes Rh2(esp)2L2 where L = pyridine, 3-picoline, 2,6-lutidine, acetonitrile, and methanol. The compounds all show well-defined π* → σ* electronic transitions in the 16500 to 20500 cm(-1) range, and Rh-Rh stretching vibrations in the range from 304 to 322 cm(-1). Taking these data into account we find that the strength of axial ligand binding to Rh2(esp)2 increases in the series CH3OH ∼ 2,6-lutidine < CH3CN < 3-methylpyridine ∼ pyridine. Quasi-reversible Rh2(4+/5+) redox waves are only obtained when either acetonitrile or no axial ligand is present. In the presence of pyridines, irreversible oxidation waves are observed, suggesting that these ligands destabilize the Rh2 complex under oxidative conditions.

Separation of gold from irradiated actinide material utilizing a 2- thenoyltrifluoroacetone extraction resin.

Post-detonation nuclear forensics capabilities depend on the ability to rapidly isolate radionuclides to improve measurement quality. In this work an extraction chromatography resin was developed utilizing thenoyltrifluoroacetone and 1-octanol supported on Eichrom prefilter resin. The resin was tested in nitric and hydrochloric acid matrices. In nitric acid the resin was able to extract zirconium, while in hydrochloric acid matrices it was possible to extract iron and gallium. In all acid conditions tested, gold was retained but can be eluted from the column with 10 % thiourea.

A new method for quantifying 64Cu in nuclear debris samples.

Quantifying 64Cu in post-detonation nuclear debris samples can provide important diagnostic information regarding the structural materials used within a nuclear device. However, this task is challenging due to the weak gamma emissions associated with the decay of 64Cu, its short half-life (12.701 h), and the presence of interfering fission product radioisotopes. Large quantities of debris sample are generally needed to accurately quantify 64Cu, which can be problematic in sample-limited scenarios where other radiometric analyses are required. Herein, we present a new method for the separation of 64Cu from solutions of mixed fission products and demonstrate the quantification of its activity through use of gas-flow proportional beta counting. The new method was validated through a series of rigorous tests and was shown to improve the detection limit of 64Cu by over two orders of magnitude, from 2.5 × 106 to 1.3 × 104 atoms/sample for 100 min measurements.

Chemical separation and measurement of platinum activation products.

A method has been developed to purify and measure platinum radioisotopes in the presence of fission products and environmental constituents. The method uses a combination of cation exchange and anion exchange chromatography and selective precipitation steps to remove other radioisotopes from the sample. The addition of stable platinum carrier allows for a gravimetric determination of the chemical yield of the procedure. Overall, the method is fast, simple, and potentially applicable for rapid turnaround of unknown samples. Using this method, multiple platinum radioisotopes were measured in two different irradiation experiments. The measured ratios of the platinum radioisotopes clearly reflect the neutron spectrum of the irradiation, suggesting that platinum radioisotopes could be valuable signatures in nuclear forensic analyses.