RESUMEN
A study of the volatilization rate of the nerve agent VX (O-ethyl S-2-(N,N-diisopropylamino)ethyl methylphosphonothiolate) from various urban matrices in a specially designed climatic chamber (model system) is described. The performance of the model system combined with the analytical procedure produced profiles of vapor concentration obtained from samples of VX dispersed as small droplets on the surfaces of the matrices. The results indicated that the bitumen-containing surfaces such as asphalt blocks and bitumen sheets conserve VX and slow-release part of it over a long period of time. No complete mass balance could be obtained for these surfaces. Influence of environmental and experimental parameters as well as the efficacy of decontamination procedure were also measured. From smooth surface tiles a fast release of VX was measured and almost a complete mass balance was obtained, which characterizes the behavior of inert surfaces. Experiments carried out on concrete blocks showed fast decay of the concentration profile along with a very poor reconstruction of the initial quantity of VX, implying that this matrix degraded VX actively due to its multiple basic catalytic sites. To complement this study, solid-state NMR measurements were compared to add data concerning agent-fate within the matrices.
Asunto(s)
Materiales de Construcción , Hidrocarburos/química , Compuestos Organotiofosforados/química , Descontaminación , Restauración y Remediación Ambiental , Espectroscopía de Resonancia Magnética , Dióxido de Silicio/química , Propiedades de Superficie , VolatilizaciónRESUMEN
The reactions of the chemical warfare agents (CWAs) 2,2'-dichloroethyl sulfide (HD), O-ethyl S-2-(diisopropylamino)-ethyl methylphosphonothioate (VX) and isopropyl methylphosphonofluoridate (GB) with various metal oxide-supported quaternary ammonium fluorides (QAF) and/or potassium fluoride (KF) reagents are described. These active sorbents, which were prepared by a modified procedure, include alumina, silica and titania, enriched with "available" (not bound to the surface) fluoride ions. Alumina-based fluoride reagents were found to be more active than their silica or titania counterparts. QAF/Al(2)O(3) reagents, compared to KF/Al(2)O(3), exhibit an exceptional reactivity toward HD, as demonstrated both in reaction rates and product identity. For example, with TBAF, t(1/2) is 15 min for the formation of the elimination product divinyl sulfide (DVS), while with KF, t(1/2) is 10 h for the formation of the hydrolysis product thiodiglycol (TDG). On the other hand, both sorbents reacted similarly against the nerve agents GB or VX. In order to increase the "available" fluoride content on the solid surface, the mixed active sorbent TBAF/KF/Al(2)O(3) (20/20/60) was developed. On this powder, all three CWAs were degraded instantaneously at the low loading of 1 wt% (t(1/2) < 2 min) and rapidly at the higher loadings of 5-10 wt% (t(1/2) of minutes scale). We assume that the relatively large amount of inorganic fluoride (KF) acts synergistically as a reservoir for the more reactive organic fluorides (TBAF). Moreover, the alumina surface hydroxyl groups may also operate as a water reservoir for the hydrolysis of VX or GB. Therefore, TBAF/KF/Al(2)O(3) might be considered as a promising destructive sorbent for CWAs.
Asunto(s)
Óxido de Aluminio/química , Sustancias para la Guerra Química/química , Fluoruros/química , Compuestos de Potasio/química , Compuestos de Amonio Cuaternario/químicaRESUMEN
The degradation of the warfare agent sulfur mustard (HD) adsorbed onto KF/Al(2)O(3) sorbents is described. These processes were explored by MAS NMR, using (13)C-labeled sulfur mustard (HD*) and LC-MS techniques. Our study on the detoxification of this blister agent showed the formation of nontoxic substitution and less-toxic elimination products (t(1/2) = 3.5-355 h). Interestingly, the reaction rates were found to be affected by MAS conditions, i.e., by a centrifugation effect. The products and the mechanisms of these processes are discussed.
Asunto(s)
Óxido de Aluminio/química , Fluoruros/química , Gas Mostaza/química , Compuestos de Potasio/química , Cromatografía Liquida , Espectroscopía de Resonancia Magnética , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
A decontamination system for chemical warfare agents was developed and tested that combines a liquid decontamination reagent solution with solid sorbent particles. The components have fewer safety and environmental concerns than traditional chlorine bleach-based products or highly caustic solutions. The liquid solution, based on Decon Greentrade mark, has hydrogen peroxide and a carbonate buffer as active ingredients. The best solid sorbents were found to be a copolymer of ethylene glycol dimethacrylate and n-lauryl methacrylate (Polytrap 6603 Adsorber); or an allyl methacrylate cross-linked polymer (Poly-Pore E200 Adsorber). These solids are human and environmentally friendly and are commonly used in cosmetics. The decontaminant system was tested for reactivity with pinacolyl methylphosphonofluoridate (Soman, GD), bis(2-chloroethyl)sulfide (Mustard, HD), and S-(2-diisopropylaminoethyl) O-ethyl methylphosphonothioate (VX) by using NMR Spectroscopy. Molybdate ion (MoO(4)(-2)) was added to the decontaminant to catalyze the oxidation of HD. The molybdate ion provided a color change from pink to white when the oxidizing capacity of the system was exhausted. The decontaminant was effective for ratios of agent to decontaminant of up to 1:50 for VX (t(1/2) < or = 4 min), 1:10 for HD (t(1/2) < 2 min with molybdate), and 1:10 for GD (t(1/2) < 2 min). The vapor concentrations of GD above the dry sorbent and the sorbent with decontamination solution were measured to show that the sorbent decreased the vapor concentration of GD. The E200 sorbent had the additional advantage of absorbing aqueous decontamination solution without the addition of an organic co-solvent such as isopropanol, but the rate depended strongly on mixing for HD.
Asunto(s)
Sustancias para la Guerra Química/análisis , Guerra Química , Descontaminación/métodos , Soman/análisis , Purificación del Agua/métodos , Adsorción , Carbonatos/química , Cosméticos , Reactivos de Enlaces Cruzados/química , Peróxido de Hidrógeno/química , Ácidos Láuricos/química , Espectroscopía de Resonancia Magnética , Metacrilatos/química , Molibdeno/química , Polímeros/químicaRESUMEN
Micrometer-sized polystyrene template particles of narrow size distribution were prepared by dispersion polymerization of styrene in 2-methoxyethanol. Uniform micrometer-sized polystyrene/crosslinked poly(styrene-divinyl benzene) composite particles were formed by a single-step swelling process of the template particles with styrene, divinyl benzene and benzoyl peroxide, followed by polymerization at 70 degrees C. Uniform micrometer-sized crosslinked poly(styrene-divinyl benzene) particles of higher surface area were produced by dissolution of the template polystyrene part of the former composite particles with N,N-dimethylformamide. Hydroperoxide conjugated crosslinked poly(styrene-divinyl benzene) particles were produced by ozonolysis of these particles. The effect of ozonolysis conditions, such as exposure time and flow rate of the ozone, on the hydroperoxide conjugation to the crosslinked particles was also studied. Functionalization of the crosslinked poly(styrene-divinyl benzene) particles was performed by graft polymerization of vinylic monomers such as acrylonitrile and chloromethylstyrene on the hydroperoxide conjugated crosslinked particles. This was accomplished by raising the temperature (e.g., 70 degrees C) of deairated acetonitrile dispersions containing the hydroperoxide conjugated particles and the vinylic monomers. The influence of various polymerization parameters on the grafting yield, e.g., monomer concentration, conjugated hydroperoxide concentration, and temperature, was also elucidated.
RESUMEN
The fate of the persistent OP nerve agent O-ethyl S-[2-(diisopropylamino)ethyl] methylphosphonothioate (VX) on granular activated carbons that are used for gas filtration was studied by means of 31P magic angle spinning (MAS) NMR spectroscopy. VX as vapor or liquid was adsorbed on carbon granules, and MAS NMR spectra were recorded periodically. The results show that at least 90% of the adsorbed VX decomposes within 20 days or less to the nontoxic ethyl methylphosphonic acid (EMPA) and bis(S-2-diisopropylaminoethane) {(DES)2}. Decomposition occurred irrespective of the phase from which VX was loaded, the presence of metal impregnation on the carbon surface, and the water content of the carbon. Theoretical and practical aspects of the degradation are discussed.