RESUMEN
We report on the use of a simple, bench-stable [Fe(salen)2]-µ-oxo precatalyst in the reduction of nitro compounds. The reaction proceeds at room temperature across a range of substrates, including nitro aromatics and aliphatics. By changing the reducing agent from pinacol borane (HBpin) to phenyl silane (H3SiPh), we can chemoselectively reduce nitro compounds while retaining carbonyl functionality. Our mechanistic studies, which include kinetics, electron paramagnetic resonance (EPR), mass spectrometry, and quantum chemistry, indicate the presence of a nitroso intermediate and the generation of an on-cycle iron hydride as a key catalytic intermediate. Based on this mechanistic insight, we were able to extend the chemistry to hydroamination and identified a simple substrate feature (alkene lowest unoccupied molecular orbital (LUMO) energy) that could be used to predict which alkenes would result in productive catalysis.
RESUMEN
Reported is the reaction of a series of iron(II) bisphosphine complexes with PH3 in the presence of NaBArF4 [where BArF4 = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate]. The iron(II) bisphosphine reagents bear two chlorides or a hydride and a chloride motif. We have isolated six different cationic terminal-bound PH3 complexes and undertaken rigorous characterization by NMR spectroscopy, single crystal X-ray diffraction, and mass spectrometry, where the PH3 often remains intact during the ionization process. Unusual bis- and tris-PH3 complexes are among the compounds isolated. Changing the monophosphine from PH3 to PMe3 results in the formation of an unusual Fe7 cluster, but with no PMe3 being ligated. Finally, by using an iron(0) source, we have provided a rare example of a terminally bound iron-PH2 complex.
RESUMEN
Appetite for reactions involving PH3 has grown in the past few years. This in part is due to the ability to generate PH3 cleanly and safely via digestion of cheap metal phosphides with acids, thus avoiding pressurized cylinders and specialized equipment. In this perspective we highlight current trends in forming new P-C/P-OC bonds with PH3 and discuss the challenges involved with selectivity and product separation encumbering these reactions. We highlight the reactivity of PH3 with main group reagents, building on the early pioneering work with transition metal complexes and PH3. Additionally, we highlight the recent renewal of interest in alkali metal sources of H2P- which are proving to be useful synthons for chemistry across the periodic table. Such MPH2 sources are being used to generate the desired products in a more controlled fashion and are allowing access to unexplored phosphorus-containing species.
Asunto(s)
Complejos de Coordinación , Elementos de Transición , Complejos de Coordinación/química , Metales , Fósforo/química , Elementos de Transición/químicaRESUMEN
We describe the iron-catalyzed polymerizations of diol and silane monomers to obtain fourteen different poly(silylether) products with number average molecular weights (Mn ) up to 36.3â kDa. The polymerization reactions developed in this study are operationally simple and applicable to 1° and 2° silane monomer substrates and a range of benzylic and aliphatic diol substrates as well as one polyol example. The polymers were characterized by IR spectroscopy, DSC and TGA and, where solubility allowed, 1 H, 13 C{1 H}, 29 Si{1 H} NMR spectroscopies, GPC and MALDI-TOF were also employed. The materials obtained displayed low Tg values (-70.6 to 19.1 °C) and were stable upon heating up to T-5%,Ar 421.6 °C. A trend in T-5%,Ar was observed whereby use of a 2° silane leads to higher T-5%,Ar compared to those obtained using a 1° silane. Reaction monitoring was undertaken by in situ gas evolution studies coupled with GPC analysis to follow the progression of chain-length growth which confirmed a condensation polymerization-type mechanism.
RESUMEN
The application of an alkyne cyclotrimerization regime with an [Fe(salen)]2 -µ-oxo (1) catalyst to triphenylmethylphosphaalkyne (2) yields gram-scale quantities of 2,4,6-tris(triphenylmethyl)-Dewar-1,3,5-triphosphabenzene (3). Bulky lithium salt LiHMDS facilitates a rearrangement of 3 to the 1,3,5-triphosphabenzene valence isomer (3'), which subsequently undergoes an intriguing phosphorus migration reaction to form the ring-contracted species (3''). Density functional theory calculations provide a plausible mechanism for this rearrangement. Given the stability of 3, a diverse array of unprecedented transformations was investigated. We report novel crystallographically characterized products of successful nucleophilic/electrophilic addition and protonation/oxidation reactions.
RESUMEN
Herein, we report an iron(II)-catalyzed polymerization of arylallenes. This reaction proceeds rapidly at room temperature in the presence of a hydride co-catalyst to generate polymers of weight up to Mn =189 000â Da. We have determined the polymer structure and chain length for a range of monomers through a combination of NMR, differential scanning calorimetry (DSC) and gel permeation chromatography (GPC) analysis. Mechanistically, we postulate that the co-catalyst does not react to form an iron(II) hydride inâ situ, but instead the chain growth is proceeding via a reactive Fe(III) species. We have also performed kinetic and isotopic experiments to further our understanding. The formation of a highly unusual 1,3-substituted cyclobutane side-product is also investigated.
RESUMEN
Iron-catalyzed isomerization of alkenes is reported using an iron(II) ß-diketiminate pre-catalyst. The reaction proceeds with a catalytic amount of a hydride source, such as pinacol borane (HBpin) or ammonia borane (H3 Nâ BH3 ). Reactivity with both allyl arenes and aliphatic alkenes has been studied. The catalytic mechanism was investigated by a variety of means, including deuteration studies, Density Functional Theory (DFT) and Electron Paramagnetic Resonance (EPR) spectroscopy. The data obtained support a pre-catalyst activation step that gives access to an η2 -coordinated alkene FeI complex, followed by oxidative addition of the alkene to give an FeIII intermediate, which then undergoes reductive elimination to allow release of the isomerization product.
RESUMEN
The hydrogen/halogen exchange of phosphines has been exploited to establish a truly useable substrate scope and straightforward methodology for the formation of cyclopolyphosphines. Starting from a single dichlorophosphine, a sacrificial proton "donor phosphine" makes the rapid, mild synthesis of cyclopolyphosphines possible: reactions are complete within 10 min at room temperature. Novel (aryl)cyclopentaphosphines (ArP)5 have been formed in good conversion, with the crystal structures presented. The use of catalytic quantities of iron(III) acetylacetonate provides significant improvements in conversion in the context of diphosphine (Ar2P)2 and alkyl-substituted cyclotetra- or cyclopentaphosphine ((AlkylP)n, where n = 4 or 5) formation. Both iron-free and iron-mediated reactions show high levels of selectivity for one specific ring size. Finally, investigations into the reactivity of Fe(acac)3 suggest that the iron species is acting as a sink for the hydrochloric acid byproduct of the reaction.
RESUMEN
Transfer hydrogenation (TH) has historically been dominated by Meerwein-Ponndorf-Verley (MPV) reactions. However, with growing interest in amine-boranes, not least ammonia-borane (H3 Nâ BH3 ), as potential hydrogen storage materials, these compounds have also started to emerge as an alternative reagent in TH reactions. In this Review we discuss TH chemistry using H3 Nâ BH3 and their analogues (amine-boranes and metal amidoboranes) as sacrificial hydrogen donors. Three distinct pathways were considered: 1)â classical TH, 2)â nonclassical TH, and 3)â hydrogenation. Simple experimental mechanistic probes can be employed to distinguish which pathway is operating and computational analysis can corroborate or discount mechanisms. We find that the pathway in operation can be perturbed by changing the temperature, solvent, amine-borane, or even the substrate used in the system, and subsequently assignment of the mechanism can become nontrivial.
RESUMEN
A method has been developed to reliably quantify the isotopic composition of liquid water, requiring only immersion of a "ReactIR" probe in the sample under test. The accuracy and robustness of this method has been extensively tested using a deuterium/protium system, and substantial improvements in sensitivity were obtained using highly novel chemical signal amplification methods demonstrating a standard deviation of 247 ppb D (a δD of 1.6 ). This compares favorably with other more costly and time-consuming techniques and is over 20 times more sensitive than any previously published FTIR study. Computational simulations of a model system match the experimental data and show how these methods can be adapted to a tritium/protium system.
RESUMEN
An iron catalyst has been developed for the transfer hydrogenation of carbon-carbon multiple bonds. Using a well-defined ß-diketiminate iron(II) precatalyst, a sacrificial amine and a borane, even simple, unactivated alkenes such as 1-hexene undergo hydrogenation within 1 h at room temperature. Tuning the reagent stoichiometry allows for semi- and complete hydrogenation of terminal alkynes. It is also possible to hydrogenate aminoalkenes and aminoalkynes without poisoning the catalyst through competitive amine ligation. Furthermore, by exploiting the separate protic and hydridic nature of the reagents, it is possible to regioselectively prepare monoisotopically labeled products. DFT calculations define a mechanism for the transfer hydrogenation of propene with nBuNH2 and HBpin that involves the initial formation of an iron(II)-hydride active species, 1,2-insertion of propene, and rate-limiting protonolysis of the resultant alkyl by the amine N-H bond. This mechanism is fully consistent with the selective deuteration studies, although the calculations also highlight alkene hydroboration and amine-borane dehydrocoupling as competitive processes. This was resolved by reassessing the nature of the active transfer hydrogenation agent: experimentally, a gel is observed in catalysis, and calculations suggest this can be formulated as an oligomeric species comprising H-bonded amine-borane adducts. Gel formation serves to reduce the effective concentrations of free HBpin and nBuNH2 and so disfavors both hydroboration and dehydrocoupling while allowing alkene migratory insertion (and hence transfer hydrogenation) to dominate.
RESUMEN
The ability to tune between different regioselectivities using a common pre-catalyst is an unusual yet highly desirable process. Here, we report the use of an iron(II) pre-catalyst that can be used to synthesize vinyl phosphines in a Markovnikov-selective manner in benzene, whereas a simple change to dichloromethane as the reaction solvent leads to the Z-selective anti-Markovnikov product. Preliminary mechanistic studies are reported that suggest Markovnikov selectivity is a radical-mediated process, whereas the anti-Markovnikov selectivity is not radical in nature but is due to a change in oxidation state.
RESUMEN
Catalytic dehydrocoupling methodologies, whereby dihydrogen is released from a substrate (or intermolecularly from two substrates) is a mild and efficient method to construct main group element-main group element bonds, the products of which can be used in advanced materials, and also for the development of hydrogen storage materials. With growing interest in the potential of compounds such as ammonia-borane to act as hydrogen storage materials which contain a high weight% of H2, along with the current heightened interest in base metal catalyzed processes, this review covers recent developments in amine and phosphine dehydrocoupling catalyzed by iron complexes. The complexes employed, products formed and mechanistic proposals will be discussed.
RESUMEN
Iron-catalyzed hydroboration (HB) of alkenes and alkynes is reported. A simple change in ligand structure leads to an extensive change in catalyst activity. Reactions proceed efficiently over a wide range of challenging substrates including activated, unactivated and sterically encumbered motifs. Conditions are mild and do not require the use of reducing agents or other additives. Large excesses of borating reagent are not required, allowing control of chemo- and regioselectivity in the presence of multiple double bonds. Mechanistic insight reveals that the reaction is likely to proceed via a highly reactive iron hydride intermediate.
RESUMEN
Catalytic dehydrocoupling of primary and secondary phosphines has been achieved for the first time using an iron pre-catalyst. The reaction proceeds under mild reaction conditions and is successful with a range of diarylphosphines. A proton acceptor is not needed for the transformation to take place, but addition of 1-hexene does allow for turnover at 50 °C. The catalytic system developed also facilitates the dehydrocoupling of phenylphosphane and dicyclohexylphosphane. A change in solvent switches off dehydrocoupling to allow hydrophosphination of alkenes.
RESUMEN
Palladium(II) acetate is readily converted into [Pd3 (µ(2) -OH)(OAc)5 ] (1) in the presence of water in a range of organic solvents and is also slowly converted in the solid state. Complex 1 can also be formed in nominally anhydrous solvents. Similarly, the analogous alkoxide complexes [Pd3 (µ(2) -OR)(OAc)5 ] (3) are easily formed in solutions of palladium(II) acetate containing a range of alcohols. An examination of a representative Wacker-type oxidation shows that the Pd-OH complex 1 and a related Pd-oxo complex 4 can be excluded as potential catalytic intermediates in the absence of exogenous water.
RESUMEN
We report a detailed study into the method of precatalyst activation during alkyne cyclotrimerization. During these studies we have prepared a homologous series of Fe(III)-µ-oxo(salen) complexes and use a range of techniques including UV-vis, reaction monitoring studies, single crystal X-ray diffraction, NMR spectroscopy, and LIFDI mass spectrometry to provide experimental evidence for the nature of the on-cycle iron catalyst. These data infer the likelihood of ligand reduction, generating an iron(salan)-boryl complex as a key on-cycle intermediate. We use DFT studies to interrogate spin states, connecting this to experimentally identified diamagnetic and paramagnetic species. The extreme conformational flexibility of the salan system appears connected to challenges associated with crystallization of likely on-cycle species.
RESUMEN
We report the activation and functionalization of Si-N bonds with pinacol borane catalyzed by a three-coordinate iron(II) ß-diketiminate complex. The reactions proceed via the mild activation of silazanes to yield useful hydrosilanes and aminoboranes. The reaction is studied by kinetic analysis, along with a detailed investigation of decomposition pathways using catecholborane as an analogue of the pinacol borane used in catalysis. We have extended the methodology to develop a polycarbosilazane depolymerization strategy, which generates hydrosilane quantitatively along with complete conversion to the Bpin-protected diamine. The analogous Si-O bond cleavage can also be achieved with heating, using silyl ether starting materials to generate hydrosilane and alkoxyborane products. Depolymerization of poly(silyl ether)s using our strategy successfully converts the polymer to 90% Bpin-protected alcohols.
RESUMEN
In this Perspective, we discuss what we perceive to be the continued challenges faced in catalytic hydrophosphination chemistry. Currently the literature is dominated by catalysts, many of which are highly effective, that generate the same phosphorus architectures, e.g., anti-Markovnikov products from the reaction of activated alkenes and alkynes with diarylphosphines. We highlight the state of the art in stereoselective hydrophosphination and the scope and limitations of chemoselective hydrophosphination with primary phosphines and PH3. We also highlight the progress in the chemistry of the heavier homologues. In general, we have tried to emphasize what is missing from our hydrophosphination armament, with the aim of guiding future research targets.
RESUMEN
A synthetic study into the catalytic hydrogen/deuterium (H/D) exchange of 1° silanes, 2° silanes, and 3° siloxanes is presented, facilitated by iron-ß-diketiminato complexes (1a and 1b). Near-complete H/D exchange is observed for a variety of aryl- and alkyl-containing hydrosilanes and hydrosiloxanes. The reaction tolerates alternative hydride source pinacolborane (HBpin), with quantitative H/D exchange. A synthetic and density functional theory (DFT) investigation suggests that a monomeric iron-deuteride is responsible for the H/D exchange.