Diagnostic accuracy of salivary active matrix metalloproteinase (aMMP)-8 point-of-care test for detecting periodontitis in adults: A systematic review and meta-analysis.

OBJECTIVE: To determine the accuracy of salivary active matrix metalloproteinase (aMMP)-8 point-of-care test (POCT) for detecting periodontitis in adults, through meta-analysis. MATERIALS AND METHODS: Diagnostic studies evaluating the accuracy of salivary/oral rinse aMMP-8 POCT for detecting periodontitis in adults, when compared with clinical examination, were considered eligible. A comprehensive search was performed up to 31 August 2023 through five databases. Quality Assessment of Diagnostic Accuracy Studies 2 was utilized to evaluate the methodological quality of the included articles. Meta-analysis was performed using Bayesian bivariate hierarchical model and subgroup analysis. RESULTS: From 368 screened studies, 6 studies (4 cross-sectional and 2 longitudinal studies) were included in the meta-analysis. Overall, the pooled sensitivity and specificity of salivary aMMP-8-POCT for detecting periodontitis were 0.63 (95% CI: 0.41-0.82) and 0.84 (95% CI: 0.65-0.95), respectively. Subgroup analyses revealed that the 95% CI for oral fluid types, predefined diagnostic thresholds and the POCT systems largely overlapped, indicating that the differences between them may not be significant. CONCLUSION: Salivary aMMP-8 POCT shows fair accuracy for detecting periodontitis. The diagnostic accuracy cannot be significantly influenced by the types of oral fluids, predefined diagnostic thresholds or the specific POCT systems used. More research is needed to confirm the clinical utility and implementation of aMMP-8 POCT in the diagnosis of periodontitis.

Bone preservation or augmentation simultaneous with or prior to dental implant placement: A systematic review of outcomes and outcome measures used in clinical trials in the last 10 years.

AIM: To evaluate outcome measures and methods of assessment in clinical studies on bone augmentation/preservation procedures for the placement of dental implants. MATERIALS AND METHODS: A systematic search was performed on three databases from January 2011 to April 2021 to identify clinical studies reporting on any type of bone augmentation/preservation procedure. The outcomes that have been used to assess efficacy or performance in each study were registered and assigned to different domains (group of outcomes). The review followed the Preferred Reporting Items for Systematic Review and Meta-Analyses statement. RESULTS: Seven-hundred and eighty-three publications were included. Only 81.8% of the papers had a clear definition of their primary outcome. The rate of complications (59.3%), implant survival (58.2%), 3D radiographic bone gain/change (30%), marginal bone level (MBL; 29%), and histological outcomes (25.5%) were the most frequently reported outcome domains. The most commonly used primary outcome was 3D radiographic bone gain/change (25.8%), followed by implant survival (13.0%). Patient-reported outcome measures (PROMs) were reported in 15.7% of studies. Differences in the reported outcomes were observed among different types of bone preservation/augmentation interventions (i.e., alveolar ridge preservation, immediate implants, horizontal and/or vertical ridge augmentation, and sinus floor augmentation). CONCLUSION: Within the past decade, great heterogeneity was observed among the outcomes considered in studies evaluating bone preservation/augmentation procedures. Three-dimensional radiographic bone gain/change was the most routinely reported main outcome variable, while PROMs were rarely reported.

Bone preservation or augmentation simultaneous with or prior to dental implant placement: A systematic review of outcomes and outcome measures used in clinical trials in the last 10 years.

AIM: To evaluate outcome measures and methods of assessment in clinical studies on bone augmentation/preservation procedures for the placement of dental implants. MATERIALS AND METHODS: A systematic search was performed on three databases from January 2011 to April 2021 to identify clinical studies reporting on any type of bone augmentation/preservation procedure. The outcomes that have been used to assess efficacy or performance in each study were registered and assigned to different domains (group of outcomes). The review followed the Preferred Reporting Items for Systematic Review and Meta-Analyses statement. RESULTS: Seven-hundred and eighty-three publications were included. Only 81.8% of the papers had a clear definition of their primary outcome. The rate of complications (59.3%), implant survival (58.2%), 3D radiographic bone gain/change (30%), marginal bone level (MBL; 29%), and histological outcomes (25.5%) were the most frequently reported outcome domains. The most commonly used primary outcome was 3D radiographic bone gain/change (25.8%), followed by implant survival (13.0%). Patient-reported outcome measures (PROMs) were reported in 15.7% of studies. Differences in the reported outcomes were observed among different types of bone preservation/augmentation interventions (i.e., alveolar ridge preservation, immediate implants, horizontal and/or vertical ridge augmentation, and sinus floor augmentation). CONCLUSION: Within the past decade, great heterogeneity was observed among the outcomes considered in studies evaluating bone preservation/augmentation procedures. Three-dimensional radiographic bone gain/change was the most routinely reported main outcome variable, while PROMs were rarely reported.

Diagnostic accuracy of active matrix metalloproteinase-8 point-of-care test for the discrimination of periodontal health status: Comparison of saliva and oral rinse samples.

BACKGROUND AND OBJECTIVES: Assessment of biomarkers, specifically active matrix metalloproteinase-8 (aMMP-8), in saliva/oral rinses is a promising diagnostic approach for periodontal health and disease. Different oral fluids have specific advantages and limitations. This study investigates the effect of sampling different fluids on the accuracy of an aMMP-8 point of care test (POCT). METHODS: Unstimulated whole saliva, a first, and a second oral rinse were sequentially taken from 95 consecutive adults. aMMP-8 was quantitatively determined with a lateral flow immunoassay (index test). A full-mouth periodontal examination was used to establish a diagnosis according to the 2017 World Workshop classification of periodontal diseases (reference standard). Diagnostic measures of the area under the receiver operating characteristic curve (AUROC), sensitivity, and specificity were assessed and compared. RESULTS: In all oral fluid samples, periodontitis patients (N = 61) had significantly elevated aMMP-8 levels and increased test positivity rates compared with subjects with periodontal health or gingivitis (N = 34). The intra-individual comparison showed that aMMP-8 levels were significantly higher in 1st oral rinse compared with other samples (1st oral rinse > saliva = 2nd oral rinse, p = .007). The aMMP-8 test using 1st oral rinse exhibited the best accuracy for detecting periodontitis with a sensitivity of 80.3%, a specificity of 67.8% and an AUROC of 0.740. CONCLUSIONS: A 30-second oral rinse with water omitting the prerinse provided the best accuracy to discriminate periodontal health and disease with an aMMP-8 POCT. This regimen seems promising for further studies in large representative populations to verify the current findings.

Evidence and risk indicators of non-random sampling in clinical trials in implant dentistry: A systematic appraisal.

AIM: Analysis of distribution of p-values of continuous differences between test and controls after randomization provides evidence of unintentional error, non-random sampling, or data fabrication in randomized controlled trials (RCTs). We assessed evidence of highly unusual distributions of baseline characteristics of subjects enrolled in clinical trials in implant dentistry. MATERIALS AND METHODS: RCTs published between 2005 and 2020 were systematically searched in Pubmed, Embase, and Cochrane databases. Baseline patient data were extracted from full text articles by two independent assessors. The hypothesis of non-random sampling was tested by comparing the expected and the observed distribution of the p-values of differences between test and controls after randomization. RESULTS: One-thousand five-hundred and thirty-eight unique RCTs were identified, of which 409 (26.6%) did not report baseline characteristics of the population, and 671 (43.6%) reported data in forms other than mean and standard deviation and could not be used to assess their random sampling. Four-hundred and fifty-eight trials with 1449 baseline variables in the form of mean and standard deviation were assessed. The study observed an over-representation of very small p-values [<.001, 1.38%, 95% confidence interval (CI) 0.85-2.12 compared to the expected 0.10%, 95% CI 0.00-0.26]. No evidence of over-representation of larger p-values was observed. Unusual distributions were present in 2.38% of RCTs and more frequent in non-registered trials, in studies supported by non-industry funding, and in multi-centre RCTs. CONCLUSIONS: The inability to assess random sampling due to insufficient reporting in 26.6% of trials requires attention. In trials reporting suitable baseline data, unusual distributions were uncommon, and no evidence of data fabrication was detected, but there was evidence of non-random sampling. Continued efforts are necessary to ensure high integrity and trust in the evidence base of the field.

Does machine-vision-assisted dynamic navigation improve the accuracy of digitally planned prosthetically guided immediate implant placement? A randomized controlled trial.

OBJECTIVES: This randomized controlled clinical trial was designed to compare the accuracy of machine-vision (MV)-based dynamic navigation (DN)-assisted immediate implant placement with the conventional freehand technique. MATERIAL AND METHODS: A total of 24 subjects requiring immediate implant placement in maxillary anterior teeth were randomly assigned to either the control (freehand by an experienced surgeon, n = 12) or the test group (MV-DN, n = 12). Implant platform, implant apex, angular, and depth deviations with respect to prosthetically guided digital planning and differences in implant insertion torque (ITV) and implant stability quotient (ISQ) were compared between the groups. RESULTS: MV-DN resulted in more accurate immediate implant position: significantly smaller global platform deviation (1.01 ± 0.41 mm vs. 1.51 ± 0.67 mm, p = .038), platform depth deviation (0.44 ± 0.46 mm vs. 0.95 ± 0.68 mm, p = .045), global apex deviation (0.88 ± 0.43 mm vs. 1.94 ± 0.86 mm, p = .001), and lateral apex deviation (0.68 ± 0.30 mm vs. 1.61 ± 0.88 mm, p = .004) were found in MV-DN compared to controls. No significant intergroup differences were observed for ITV and ISQ. CONCLUSIONS: MV-DN achieved more precise immediate implant position and comparable primary stability. Further trials are necessary to assess the benefits in terms of esthetics and tissue health/stability.

Accuracy and primary stability of tapered or straight implants placed into fresh extraction socket using dynamic navigation: a randomized controlled clinical trial.

OBJECTIVES: To compare the accuracy and primary stability of tapered and straight implants undergoing immediate implant placement with dynamic navigation. MATERIALS AND METHODS: Patients with compromised anterior teeth in maxilla were recruited and allocated randomly into (1) tapered implant group (TI group) and (2) straight implant group (SI group). Implants were inserted into fresh sockets with dynamic navigation. Three-dimensional platform deviation, apex deviation, angular deviation, insertion torque value (ITV) and implant stability quotient (ISQ) were recorded. RESULTS: Twenty patients with 20 implants were included. The overall platform, apex, and angular deviation were 0.87 ± 0.35 mm, 0.81 ± 0.34 mm, and 2.40 ± 1.31°, respectively. The accuracy was 0.86 ± 0.26 mm, 0.76 ± 0.33 mm, and 2.49 ± 1.54° for TI, and 0.89 ± 0.44 mm, 0.88 ± 0.36 mm, and 2.31 ± 1.01° for SI, with no significant difference (p = 0.85, 0.45, 0.76). Sagittal root position classification (SRP) class I may obtain greater error in numerical values in straight implants (0.97 ± 0.47 mm vs. 0.6 ± 0.16 mm, 0.92 ± 0.36 mm vs. 0.73 ± 0.36 mm, 2.48 ± 1.19° vs. 1.71 ± 0.14°). The overall ISQ was 60.74. ISQ was 60.48 for TI and 60.96 for SI, with no significant difference. Acceptable ITV (> 15 Ncm) was achieved in most of the included patients (SI 7/10, TI 9/10). CONCLUSIONS: High accuracy and primary stability of immediate implant placement could be achieved both in tapered and straight implants with dynamic navigation systems. CLINICAL RELEVANCE: Tapered and straight implants did not reach a consensus on which was better in immediate implant regarding to accuracy and primary stability. Our study demonstrated implant macrodesign did not affect accuracy and primary stability in immediate implant using dynamic navigation.

Accuracy of dynamic navigation in implant surgery: A systematic review and meta-analysis.

OBJECTIVE: To assess the accuracy of dynamic computer-assisted implant surgery. MATERIALS AND METHODS: An electronic search up to March 2020 was conducted using PubMed, Embase, and the Cochrane Central Register of Controlled Trial to identify studies using dynamic navigation in implant surgery, and additional manual search was performed as well. Clinical trials and model studies were selected. The primary outcome was accuracy. A single-arm meta-analysis of continuous data was conducted. Meta-regression was utilized for comparison on study design, guidance method, jaw, and systems. RESULTS: Ten studies, four randomized controlled trials (RCT) and six prospective studies, met the inclusion criteria. A total of 1,298 drillings and implants were evaluated. The meta-analysis of the accuracy (five clinical trials and five model studies) revealed average global platform deviation, global apex deviation, and angular deviation were 1.02 mm, 95% CI (0.83, 1.21), 1.33 mm, 95% CI (0.98, 1.67), and 3.59°, 95% CI (2.09, 5.09). Meta-regression shown no difference between model studies and clinical trials (p = .295, 0.336, 0.185), drilling holes and implant (p = .36, 0.279, 0.695), maxilla and mandible (p = .875, 0.632, 0.281), and five different systems (p = .762, 0.342, 0.336). CONCLUSION: Accuracy of dynamic computer-aided implant surgery reaches a clinically acceptable range and has potential in clinical usage, but more patient-centered outcomes and socio-economic benefits should be reported.

Bovine-Derived Xenografts Immobilized With Cryopreserved Stem Cells From Human Adipose and Dental Pulp Tissues Promote Bone Regeneration: A Radiographic and Histological Study.

Adipose tissue-derived stem cells (ADSCs) and dental pulp stem cells (DPSCs) have become promising sources for bone tissue engineering. Our study aimed at evaluating bone regeneration potential of cryopreserved ADSCs and DPSCs combined with bovine-derived xenografts with 10% porcine collagen. In vitro studies revealed that although DPSCs had higher proliferative abilities, ADSCs exhibited greater mineral depositions and higher osteogenic-related gene expression, indicating better osteogenic differentiation potential of ADSCs. After applying cryopreserved ADSCs and DPSCs in a critical-sized calvarial defect model, both cryopreserved mesenchymal stem cells significantly improved bone volume density and new bone area at 2, 4, and 8 weeks. Furthermore, the combined treatment with ADSCs and xenografts was more efficient in enhancing bone repair processes compared to combined treatment with DPCSs at all-time points. We also evaluated the sequential early bone healing process both histologically and radiographically, confirming a high agreement between these two methods. Based on these results, we propose grafting of the tissue-engineered construct seeded with cryopreserved ADSCs as a useful strategy in accelerating bone healing processes.

Graphene-Reinforced Titanium Enhances Soft Tissue Seal.

The integrity of soft tissue seal is essential for preventing peri-implant infection, mainly induced by established bacterial biofilms around dental implants. Nowadays, graphene is well-known for its potential in biocompatibility and antisepsis. Herein, a new titanium biomaterial containing graphene (Ti-0.125G) was synthesized using the spark plasma sintering (SPS) technique. After material characteristics detection, the subsequent responses of human gingival fibroblasts (HGFs) and multiple oral pathogens (including Streptococci mutans, Fusobacterium nucleatum, and Porphyromonas gingivalis) to the graphene-reinforced sample were assessed, respectively. Also, the dynamic change of the bacterial multispecies volume in biofilms was evaluated using absolute quantification PCR combined with Illumina high-throughput sequencing. Ti-0.125G, in addition to its particularly pronounced inhibitory effect on Porphyromonas gingivalis at 96 h, was broadly effective against multiple pathogens rather than just one strain. The reinforced material's selective responses were also evaluated by a co-culture model involving HGFs and multiple strains. The results disclosed that the graphene-reinforced samples were highly effective in keeping a balance between the favorable fibroblast responses and the suppressive microbial growth, which could account for the optimal soft tissue seal in the oral cavity. Furthermore, the underlying mechanism regarding new material's bactericidal property in the current study has been elucidated as the electron transfer, which disturbed the bacterial respiratory chain and resulted in a decrease of microbial viability. According to the Kyoto Encyclopedia of Genes and Genomes (KEGG) database, the PICRUSt tool was conducted for the prediction of microbial metabolism functions. Consequently, it is inferred that Ti-0.125G has promising potentials for application in implant dentistry, especially in enhancing the integrity of soft tissue and improving its resistance against bacterial infections around oral implants.

An Interannual Comparative Study on Ecosystem Carbon Exchange Characteristics in the Dinghushan Biosphere Reserve, a Dominant Subtropical Evergreen Forest Ecosystem.

Compared with other forest systems, research interest in the potential for a stronger ecosystem carbon sequestration of evergreen forests throughout subtropical China has greatly increased. The eddy covariance technique is widely employed to determine accurate forest-atmosphere carbon dioxide (CO2) flux, which is subsequently used to determine forest ecosystem carbon exchange characteristics. The Dinghushan Biosphere Reserve, a subtropical monsoon evergreen broad-leaved forest, is a suitable study area due to its warm and humid climate (compared with other regions within the same latitude), consequently playing a role in the carbon cycle in the region. For this study, we hypothesized that the forest land in this region generally acts as a carbon sink, and that its carbon sequestration capacity increases over time despite the influence of climatic factors. Here, we compared net CO2 flux data derived from the eddy covariance technique over an 8-year study window. Additionally, we ascertained the effects of various environmental factors on net CO2 flux, while also using the Michaelis-Menten model and a physiologically based process model to track and report on ecosystem carbon exchange characteristics. We observed seasonal trends in daily ecosystem flux, indicative of sensitivity to climatic factors, such as air temperature, precipitation, and sunlight. The carbon sequestration capacity of the region exhibited seasonal variability, increasing from October to March (-264 g C m-2 year-1, i.e., 48.4%) while weakening from April to September (-150 g C m-2 year-1, i.e., 40.4%) on average. The net ecosystem exchange (NEE) rate varied from -518 to -211 g C m-2 year-1; ecosystem respiration (Re) varied from 1,142 to 899 g C m-2 year-1; and gross primary production (GPP) varied from 1,552 to 1,254 g C m-2 year-1. This study found that even though the Dinghushan Biosphere Reserve generally acts as a carbon sink, its carbon sequestration capacity did not increase significantly throughout the study period. The techniques (models) used in this study are suitable for application in other ecosystems globally, which can aid in their management and conservation. Finally, the Dinghushan Biosphere Reserve is both an exemplary and a model forest system useful in exploring CO2 absorption and sequestration from the atmosphere.

Temperature inversions in the atmospheric boundary layer and lower troposphere over the Sichuan Basin, China: Climatology and impacts on air pollution.

The Sichuan Basin (SB) is one of the four most severely polluted regions in China in terms of air quality, and the frequent generation of temperature inversions is a key factor. The deep mountain-basin topography and the geographical location adjacent to the Tibetan Plateau combine to make the inversion characteristics of this region unique. Knowledge regarding these characteristics remains limited, however. In this study, the radiosonde data at standard pressure levels and significant levels from all SB operational radiosonde stations over 2015-2018 were used to document the climatological features of the inversions from the surface to a height of 5500 m and to evaluate the impact on local air pollutant concentrations. Results revealed that the temperature inversion in the SB is a common and year-round phenomenon. The annual inversion frequency, depth, and strength values are 74.4%, 252.2 m, and 1.3 °C/100 m, respectively. The inversions are most frequent (95.4%), deepest (289.4 m), and strongest (1.6 °C/100 m) in winter. They tend to occur at one of two heights, either below 600 m or between 2200 and 3500 m. Based on their bottom heights, the inversions were divided into three groups: surface-based inversions (SIs), elevated inversions (EIs), and lower-troposphere inversions (LTIs). Annual LTI is most frequent (63.0%) and deepest (264.7 m), while annual SI is strongest (1.8 °C/100 m). Extreme contrasts exist in the seasonal properties of different inversion types. All types of inversions play a considerable role in air pollution, resulting in a high probability of severe and very serious pollution in winter. SI has a greater impact on pollutant concentrations than EI and LTI. The frequent generation of LTIs is a unique feature of the deep SB. LITs exert a significant impact on the formation of local heavy air pollution, but have not been given sufficient attention.

Extracellular vesicle and mesenchymal stem cells in bone regeneration: recent progress and perspectives.

Transplanting mesenchymal stem cells (MSCs) has been widely perceived as an ideal treatment for bone repair and regeneration, owing to their differential potential. However, researchers found that very few intravenous MSCs could stay in the target tissue, whereas the majority of them are trapped in liver, spleen, and lung, largely reducing its therapeutic effects. Recently, extracellular vesicles (EVs) have attracted increased attention due to their function in bone repair and advantages over traditional cell therapy. Also, MSCs-derived EVs are likely to achieve the osteogenic goal via modulating the cells and cytokines involved in bone metabolism. This review aims at summarizing the function of EVs and MSCs in bone metabolism and regeneration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 243-250, 2019.

Macrophage phenotype in the epigallocatechin-3-gallate (EGCG)-modified collagen determines foreign body reaction.

Collagen has been widely used in guided bone regeneration, and the implantation of collagen membranes will elicit the foreign body reaction (FBR). The imbalance of FBR often leads to failure of dental implants. Therefore, modulation of the FBR after implantation of collagen membranes becomes increasingly important. Macrophages, pivotal in FBR, have been distinguished into pro-inflammatory (M1) and anti-inflammatory (M2) phenotypes. Epigallocatechin-3-gallate (EGCG)-modified collagen membranes have been previously shown to regulate secretion of inflammatory factors. In this study, immunohistochemistry of CD31 showed that areas of blood vessels were significantly enlarged after implantation of EGCG-modified collagen membranes compared with those treated with pure collagen membranes. Besides, haematoxylin-eosin staining and immunofluorescence showed an increased number of M2 macrophages after implantation of EGCG-modified collagen membranes. In addition, quantitative real-time polymerase chain reaction showed that after implantation of EGCG-modified collagen membranes, expression of CXCL1 (predominant chemoattractants to neutrophils and inflammation promotors) was significantly downregulated, whereas expressions of STAB1, CCR2, CCR3, CCL2, and CCL3 (related to M2 macrophages) were significantly upregulated. From these findings, we conclude that EGCG-modified collagen membranes were able to regulate the recruitment and polarization of macrophages, so that ameliorate FBR.

An automation-assisted generic approach for biological sample preparation and LC-MS/MS method validation.

BACKGROUND: Although it is well known that automation can provide significant improvement in the efficiency of biological sample preparation in quantitative LC-MS/MS analysis, it has not been widely implemented in bioanalytical laboratories throughout the industry. This can be attributed to the lack of a sound strategy and practical procedures in working with robotic liquid-handling systems. RESULTS: Several comprehensive automation assisted procedures for biological sample preparation and method validation were developed and qualified using two types of Hamilton Microlab liquid-handling robots. The procedures developed were generic, user-friendly and covered the majority of steps involved in routine sample preparation and method validation. CONCLUSION: Generic automation procedures were established as a practical approach to widely implement automation into the routine bioanalysis of samples in support of drug-development programs.