Understanding the Hydrothermal Formation of NaNbO3: Its Full Reaction Scheme and Kinetics.

Sodium niobate (NaNbO3) attracts attention for its great potential in a variety of applications, for instance, due to its unique optical properties. Still, optimization of its synthetic procedures is hard due to the lack of understanding of the formation mechanism under hydrothermal conditions. Through in situ X-ray diffraction, hydrothermal synthesis of NaNbO3 was observed in real time, enabling the investigation of the reaction kinetics and mechanisms with respect to temperature and NaOH concentration and the resulting effect on the product crystallite size and structure. Several intermediate phases were observed, and the relationship between them, depending on temperature, time, and NaOH concentration, was established. The reaction mechanism involved a gradual change of the local structure of the solid Nb2O5 precursor upon suspending it in NaOH solutions. Heating gave a full transformation of the precursor to HNa7Nb6O19·15H2O, which destabilized before new polyoxoniobates appeared, whose structure depended on the NaOH concentration. Following these polyoxoniobates, Na2Nb2O6·H2O formed, which dehydrated at temperatures ≥285 °C, before converting to the final phase, NaNbO3. The total reaction rate increased with decreasing NaOH concentration and increasing temperature. Two distinctly different growth regimes for NaNbO3 were observed, depending on the observed phase evolution, for temperatures below and above ≈285 °C. Below this temperature, the growth of NaNbO3 was independent of the reaction temperature and the NaOH concentration, while for temperatures ≥285 °C, the temperature-dependent crystallite size showed the characteristics of a typical dissolution-precipitation mechanism.

Time-Enhanced Performance of Oxide Thermoelectric Modules Based on a Hybrid p-n Junction.

The present challenge with all-oxide thermoelectric modules is their poor durability at high temperatures caused by the instability of the metal-oxide interfaces at the hot side. This work explains a new module concept based on a hybrid p-n junction, fabricated in one step by spark plasma co-sintering of Ca3Co4-x O9+δ (CCO, p-type) and CaMnO3-δ/CaMn2O4 (CMO, n-type). Different module (unicouple) designs were studied to obtain a thorough understanding of the role of the in situ formed hybrid p-n junction of Ca3CoMnO6 (CCMO, p-type) and Co-oxide rich phases (p-type) at the p-n junction (>700 °C) in the module performance. A time-enhanced performance of the modules attributed to this p-n junction formation was observed due to the unique electrical properties of the hybrid p-n junction being sufficiently conductive at high temperatures (>700 °C) and nonconductive at moderate and low temperatures. The alteration of module design resulted in a variation of the power density from 12.4 (3.1) to 28.9 mW/cm2 (7.2 mW) at ΔT ∼ 650 °C after 2 days of isothermal hold (900 °C hot side). This new concept provides a facile method for the fabrication of easily processable, cheap, and high-performance high-temperature modules.