RESUMEN
A detailed investigation into the mechanistic course of N-hydroxyphthalimide catalyzed oxidation of benzylic centers using sodium chlorite as the stoichiometric oxidant is reported. Through a combination of experimental, spectroscopic, and computational techniques, the transformation is interrogated, providing improved reaction conditions and an enhanced understanding of the mechanism. Performing the transformation in the presence of acetic acid or a pH 4.5 buffer leads to extended reaction times but improves the catalyst lifetime, leading to the complete consumption of the starting material. Chlorine dioxide is identified as the active oxidant that is able to oxidize the N-hydroxyphthalimide anion to the phthalimide-N-oxyl radical, the proposed catalytically active species, which is able to abstract a hydrogen atom from the substrate. A second molecule of chlorine dioxide reacts with the resultant radical and, after loss of hypochlorous acid, leads to the observed product. Through a broad variety of techniques including UV/vis, EPR and Raman spectroscopy, isotopic labeling, and the use of radical traps, evidence for the mechanism is presented that is supported through electronic structural calculations.
RESUMEN
Pyridine and related heterocyclic sulfinates have recently emerged as effective nucleophilic coupling partners in palladium-catalyzed cross-coupling reactions with (hetero)aryl halides. These sulfinate reagents are straightforward to prepare, stable to storage and coupling reaction conditions, and deliver efficient reactions, thus offering many advantages, compared to the corresponding boron-derived reagents. Despite the success of these reactions, there are only scant details of the reaction mechanism. In this study, we use structural and kinetic analysis to investigate the mechanism of these important coupling reactions in detail. We compare a pyridine-2-sulfinate with a carbocyclic sulfinate and establish different catalyst resting states, and turnover limiting steps, for the two classes of reagent. For the carbocyclic sulfinate, the aryl bromide oxidative addition complex is the resting state intermediate, and transmetalation is turnover-limiting. In contrast, for the pyridine sulfinate, a chelated Pd(II) sulfinate complex formed post-transmetalation is the resting-state intermediate, and loss of SO2 from this complex is turnover-limiting. We also investigated the role of the basic additive potassium carbonate, the use of which is crucial for efficient reactions, and deduced a dual function in which carbonate is responsible for the removal of free sulfur dioxide from the reaction medium, and the potassium cation plays a role in accelerating transmetalation. In addition, we show that sulfinate homocoupling is responsible for converting Pd(OAc)2 to a catalytically active Pd(0) complex. Together, these studies shed light on the challenges that must be overcome to deliver improved, lower temperature versions of these synthetically important processes.
RESUMEN
Differential scanning calorimetry (DSC) is increasingly used as evidence to support a favourable safety profile of novel chemistry, or to highlight the need for caution. DSC enables preliminary assessment of the thermal hazards of a potentially energetic compound. However, unlike other standard characterisation methods, which have well defined formats for reporting data, the current reporting of DSC results for thermal hazard assessment has shown concerning trends. Around half of all results in 2019 did not include experimental details required to replicate the procedure. Furthermore, analysis for thermal hazard assessment is often only conducted in unsealed crucibles, which could lead to misleading results and dangerously incorrect conclusions. We highlight the specific issues with DSC analysis of hazardous compounds currently in the organic chemistry literature and provide simple "best practice" guidelines which will give chemists confidence in reported DSC results and the conclusions drawn from them.
RESUMEN
2-Azido-4,6-dimethoxy-1,3,5-triazine (ADT) was reported recently as a new "intrinsically safe" diazo-transfer reagent. This assessment was based on differential scanning calorimetry data indicating that ADT exhibits endothermic decomposition. We present DSC data on ADT that show exothermic decomposition with an initiation temperature ( Tinit) of 159 °C and an enthalpy of decomposition (Δ HD) of -1135 J g-1 (-207 kJ mol-1). We conclude that ADT is potentially explosive and must be treated with caution, being of comparable exothermic magnitude to tosyl azide (TsN3). A maximum recommended process temperature for ADT is 55 °C.
RESUMEN
We report that halogenophilic silver(I) triflate permits halogen exchange (halex) nucleophilic (18)F-fluorination of aryl-OCHFCl, -OCF2Br and -SCF2Br precursors under mild conditions. This Ag(I)-mediated process allows for the first time access to a range of (18)F-labeled aryl-OCHF2, -OCF3 and -SCF3 derivatives, inclusive of [(18)F]riluzole. The (18)F-labeling of these medicinally important motifs expands the radiochemical space available for PET applications.
Asunto(s)
Hidrocarburos Fluorados/química , Radioisótopos de Flúor , Estructura Molecular , Compuestos Organometálicos/química , Plata/químicaRESUMEN
Lithiation/borylation methodology has been developed for the synthesis of acyclic quaternary-tertiary motifs with full control of relative and absolute stereochemistry, thus leading to all four possible isomers of a stereodiad. A novel intramolecular Zweifel-type olefination enabled acyclic stereocontrol to be transformed into cyclic stereocontrol. These key steps have been applied to the shortest enantioselective synthesis of (-)-filiformin to date (9 steps) with full stereocontrol.
Asunto(s)
Bromobencenos/síntesis química , Ácidos Borónicos/química , Bromobencenos/química , Carbamatos/química , Ésteres , Litio/química , EstereoisomerismoRESUMEN
A visible-light-mediated hydrotrifluoromethylation of unactivated alkenes that uses the Umemoto reagent as the CF(3) source and MeOH as the reductant is disclosed. This effective transformation operates at room temperature in the presence of 5 mol % Ru(bpy)(3)Cl(2); the process is characterized by its operational simplicity and functional group tolerance.
Asunto(s)
Alquenos/química , Flúor/química , Catálisis , Metilación , Estructura MolecularRESUMEN
The first total synthesis of (+)-giganin and its unnatural diastereoisomer (+)-C10-epi-giganin has been completed in a total of 13 linear steps, and 7 % and 8 % overall yield, respectively (see scheme; (-)-sp= (-)-sparteine, (+)-sps=(+)-sparteine surrogate). Lithiation-borylation methodology has been successfully applied in the key step, to couple together advanced intermediates with very high diastereoselectivity, thus demonstrating its power as a tool for total synthesis.
Asunto(s)
Acetogeninas/síntesis química , Compuestos de Boro/química , Compuestos de Litio/química , Acetogeninas/química , Técnicas de Química Sintética/métodos , Estructura Molecular , EstereoisomerismoRESUMEN
We report a computer vision strategy for the extraction and colorimetric analysis of catalyst degradation and product-formation kinetics from video footage. The degradation of palladium(ii) pre-catalyst systems to form 'Pd black' is investigated as a widely relevant case study for catalysis and materials chemistries. Beyond the study of catalysts in isolation, investigation of Pd-catalyzed Miyaura borylation reactions revealed informative correlations between colour parameters (most notably ΔE, a colour-agnostic measure of contrast change) and the concentration of product measured by off-line analysis (NMR and LC-MS). The breakdown of such correlations helped inform conditions under which reaction vessels were compromised by air ingress. These findings present opportunities to expand the toolbox of non-invasive analytical techniques, operationally cheaper and simpler to implement than common spectroscopic methods. The approach introduces the capability of analyzing the macroscopic 'bulk' for the study of reaction kinetics in complex mixtures, in complement to the more common study of microscopic and molecular specifics.
RESUMEN
Despite their wide use in academia as metal-carbene precursors, diazo compounds are often avoided in industry owing to concerns over their instability, exothermic decomposition, and potential explosive behavior. The stability of sulfonyl azides and other diazo transfer reagents is relatively well understood, but there is little reliable data available for diazo compounds. This work first collates available sensitivity and thermal analysis data for diazo transfer reagents and diazo compounds to act as an accessible reference resource. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and accelerating rate calorimetry (ARC) data for the model donor/acceptor diazo compound ethyl (phenyl)diazoacetate are presented. We also present a rigorous DSC dataset with 43 other diazo compounds, enabling direct comparison to other energetic materials to provide a clear reference work to the academic and industrial chemistry communities. Interestingly, there is a wide range of onset temperatures (T onset) for this series of compounds, which varied between 75 and 160 °C. The thermal stability variation depends on the electronic effect of substituents and the amount of charge delocalization. A statistical model is demonstrated to predict the thermal stability of differently substituted phenyl diazoacetates. A maximum recommended process temperature (T D24) to avoid decomposition is estimated for selected diazo compounds. The average enthalpy of decomposition (ΔH D) for diazo compounds without other energetic functional groups is -102 kJ mol-1. Several diazo transfer reagents are analyzed using the same DSC protocol and found to have higher thermal stability, which is in general agreement with the reported values. For sulfonyl azide reagents, an average ΔH D of -201 kJ mol-1 is observed. High-quality thermal data from ARC experiments shows the initiation of decomposition for ethyl (phenyl)diazoacetate to be 60 °C, compared to that of 100 °C for the common diazo transfer reagent p-acetamidobenzenesulfonyl azide (p-ABSA). The Yoshida correlation is applied to DSC data for each diazo compound to provide an indication of both their impact sensitivity (IS) and explosivity. As a neat substance, none of the diazo compounds tested are predicted to be explosive, but many (particularly donor/acceptor diazo compounds) are predicted to be impact-sensitive. It is therefore recommended that manipulation, agitation, and other processing of neat diazo compounds are conducted with due care to avoid impacts, particularly in large quantities. The full dataset is presented to inform chemists of the nature and magnitude of hazards when using diazo compounds and diazo transfer reagents. Given the demonstrated potential for rapid heat generation and gas evolution, adequate temperature control and cautious addition of reagents that begin a reaction are strongly recommended when conducting reactions with diazo compounds.
RESUMEN
A new catalytic method to access allylic secondary CF3 products is described. These reactions use the visible light excited Ru(bpy)3Cl2·6H2O catalyst and the Togni or Umemoto reagent as the CF3 source. The photoredox catalytic manifold delivers enantioenriched allylic trifluoromethylated products not accessible under Cu(I) catalysis.
Asunto(s)
Hidrocarburos Fluorados/síntesis química , Silanos/química , Catálisis , Técnicas Químicas Combinatorias , Cobre/química , Hidrocarburos Fluorados/química , Luz , Estructura Molecular , Procesos Fotoquímicos , EstereoisomerismoRESUMEN
A general route to prepare substituted, saturated five-membered heterocycles has been developed. The application of a wide range of starting materials to the osmium-catalyzed oxidative cyclization reaction is described. Diols, hydroxy-amides, hydroxy-sulfonamides, and carbamates all cyclize in moderate to excellent yields to give cis-tetrahydrofurans and pyrrolidines, depending upon the position of the heteroatoms in the starting materials. These cyclizations all proceed with near total selectivity for the cis-heterocycles, and with stereospecific introduction of a hydroxy group adjacent to the ring. Moreover, routes to enantiopure starting materials are described, which give enantiopure products upon cyclization. Catalyst loadings of as low as one mol percent have been successfully employed for this transformation.