RESUMEN
BACKGROUND: Shoulder arthroplasty procedures are widely indicated, and the number of shoulder arthroplasty procedures has drastically increased over the years. Rapid expansion of the utilization of reverse total shoulder arthroplasty has outpaced the more modest growth of anatomic total shoulder arthroplasty (aTSA) while shoulder hemiarthroplasty (HA) has trended down. Recently, shoulder prostheses have transitioned to increasingly modular systems offering more individualized options with the potential for decreased pain and increased range of motion. However, increased primary procedures has resulted in increased revision surgeries, with one potential cause being fretting and corrosion damage within these modular systems. METHODS: Following institutional review board approval, 130 retrieved aTSA and 135 HA explants were identified through database query. Humeral stem and head components were included in all 265 explants, whereas 108 included polyethylene glenoid liner components. All explanted components were macroscopically evaluated for standard damage modes, and taper junctions were microscopically examined for fretting/corrosion using a modified Goldberg-Cusick classification system that was 4-quadrant graded for both the male and female component. Medical records were reviewed for patient demographics and surgical information. RESULTS: In this series, 158 of explants were from female patients (male = 107), and 162 explants were from the right shoulder. Average age at implantation was 61 years (range: 24-83), average age at explanation was 66 years (range, 32-90), and average duration of implantation was 61.4 months (range, 0.5-240). Scratching, edge deformation, and burnishing were the most commonly observed standard damage modes. Of the 265 explants, 146 had a male stem component vs. 118 with a female stem component. Average summed fretting grades on male and female stem components were 8.3 and 5.9, respectively (P < .001). Average summed corrosion grades for male and female stem components were 8.2 and 6.2, respectively (P < .001). Wider male tapers (>11 mm) showed significantly less fretting and corrosion (P < .001). Lastly, mismatched metal compositions between the head and stem components showed greater fretting and corrosion damage (P = .002). CONCLUSION: In this series of 265 aTSA and HA explants, there was substantial damage present on the explanted components. All components demonstrated macroscopic damage. In this retrieval study, small-tapered male stems with small, thin female heads and mismatched metal composition between components were risk factors for increased implant wear. As shoulder arthroplasty volume increases, optimizing design is paramount for long-term success. Additional work could determine the clinical significance of these findings.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Artroplastía de Reemplazo de Hombro , Prótesis de Cadera , Humanos , Masculino , Femenino , Adulto Joven , Adulto , Persona de Mediana Edad , Anciano , Anciano de 80 o más Años , Prótesis de Cadera/efectos adversos , Artroplastía de Reemplazo de Hombro/efectos adversos , Cabeza Femoral , Falla de Prótesis , Diseño de Prótesis , Corrosión , MetalesRESUMEN
BACKGROUND: Morse taper junction tribocorrosion is recognized as an important failure mode in total hip arthroplasty. Although taper junctions are used in almost all shoulder arthroplasty systems currently available in the United States, with large variation in design, limited literature has described comparable analyses of taper damage in these implants. In this study, taper junction damage in retrieved reverse total shoulder arthroplasty (RTSA) implants was assessed and analyzed. METHODS: Fifty-seven retrieved RTSAs with paired baseplate and glenosphere components with Morse taper junctions were identified via database query; 19 of these also included paired humeral stems and trays or spacers with taper junctions. Components were graded for standard damage modes and for fretting and corrosion with a modified Goldberg-Cusick classification system. Medical records and preoperative radiographs were reviewed. Comparative analyses were performed assessing the impact of various implant, radiographic, and patient factors on taper damage. RESULTS: Standard damage modes were commonly found at the evaluated trunnion junctions, with scratching and edge deformation damage on 76% and 46% of all components, respectively. Fretting and corrosion damage was also common, observed on 86% and 72% of baseplates, respectively, and 23% and 40% of glenospheres, respectively. Baseplates showed greater moderate to severe (grade ≥ 3) fretting (43%) and corrosion (27%) damage than matched glenospheres (fretting, 9%; corrosion, 13%). Humeral stems showed moderate to severe fretting and corrosion on 28% and 30% of implants, respectively; matched humeral trays or spacers showed both less fretting (14%) and less corrosion (17%). On subgroup analysis, large-tapered implants had significantly lower summed fretting and corrosion grades than small-tapered implants (P < .001 for both) on glenospheres; paired baseplate corrosion grades were also significantly lower (P = .031) on large-tapered implants. Factorial analysis showed that bolt reinforcement of the taper junction was also associated with less fretting and corrosion damage on both baseplates and glenospheres. Summed fretting and corrosion grades on glenospheres with trunnions (male) were significantly greater than on glenospheres with bores (female) (P < .001 for both). CONCLUSIONS: Damage to the taper junction is commonly found in retrieved RTSAs and can occur after only months of being implanted. In this study, tribocorrosion predominantly occurred on the taper surface of the baseplate (vs. glenosphere) and on the humeral stem (vs. tray or spacer), which may relate to the flexural rigidity difference between the titanium and cobalt-chrome components. Bolt reinforcement and the use of large-diameter trunnions led to less tribocorrosion of the taper junction. The findings of this study provide evidence for the improved design of RTSA prostheses to decrease tribocorrosion.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Artroplastía de Reemplazo de Hombro , Prótesis de Cadera , Masculino , Femenino , Humanos , Falla de Prótesis , Diseño de Prótesis , Artroplastia de Reemplazo de Cadera/efectos adversos , CorrosiónRESUMEN
BACKGROUND: The use of reverse total shoulder arthroplasty and stemless anatomic total shoulder replacement has been increasing in the United States every year. Stemless humeral components in reverse total shoulder arthroplasty are only approved for clinical trials in the United States with an investigational device exception with limited data. METHODS: A systematic review on stemless reverse total shoulder arthroplasty was conducted according to Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines. A search was conducted on November 25, 2020, using the MEDLINE/PubMed, Cochrane, and Embase databases. All articles were reviewed by 2 independent evaluators, with any conflicts or issues resolved by consensus or a final decision by the senior author. The primary outcomes extracted were complications, radiographic results, and outcome scores. RESULTS: We evaluated 10 studies that used either the Total Evolutive Shoulder System (TESS) or Verso implant. There were 430 total patients and 437 total procedures; 266 patients in the TESS group underwent a total of 272 procedures, and 164 patients in the Verso group underwent a total of 165 procedures. The mean age at the time of surgery was 73.8 years (range, 38-93 years). The mean follow-up period ranged from 6.4 to 101.6 months per study. There was an overall trend of improved clinical outcome scores, a 0.2% humeral component loosening rate, and an 11.2% complication rate. CONCLUSIONS: This review shows that the clinical and functional outcomes following stemless or metaphyseal reverse total shoulder arthroplasty are quite promising, especially with the low rate of humeral-sided complications. There continues to be a need for additional long-term studies and randomized clinical trials.
Asunto(s)
Artroplastía de Reemplazo de Hombro , Articulación del Hombro , Prótesis de Hombro , Artroplastía de Reemplazo de Hombro/métodos , Humanos , Diseño de Prótesis , Articulación del Hombro/cirugía , Resultado del TratamientoRESUMEN
BACKGROUND: Patients undergoing reverse total shoulder arthroplasty (RTSA) are at risk of significant perioperative blood loss. To date, few studies have examined the effectiveness of tranexamic acid (TXA) to reduce blood loss in the setting of RTSA. METHODS: In a prospective, double-blinded, single-surgeon trial, we analyzed 102 patients undergoing primary RTSA who were randomized to receive intravenous TXA (n = 53) or placebo (n = 49). Calculated total blood loss, drain output, and hemoglobin (Hb) drop were measured. Postoperative transfusions were recorded. Complications were assessed out to 6 weeks postoperatively. RESULTS: Total blood loss was less for the TXA group (1122.4 ± 411.6 mL) than the placebo group (1472.6 ± 475.4 mL, P < .001). Total drain output was less for the TXA group (221.4 ± 126.2 mL) than the placebo group (371.9 ± 166.3 mL , P < .001). Total Hb loss was less in the TXA group (154.57 ± 60.29 g) compared with the placebo group (200.1 ± 65.5 g, P = .001). Transfusion rates differed significantly at postoperative day 1; however, overall transfusion rates did not vary significantly. Seven patients (14.3%) and 12 units were transfused in the placebo group compared with 3 patients (5.7%) and 3 units in the TXA group. DISCUSSION: In this cohort of patients undergoing primary RTSA, TXA was effective in reducing total drain output, total Hb loss, and total blood loss compared with a placebo control.
Asunto(s)
Antifibrinolíticos/uso terapéutico , Artroplastía de Reemplazo de Hombro/efectos adversos , Pérdida de Sangre Quirúrgica/prevención & control , Hemorragia Posoperatoria/prevención & control , Ácido Tranexámico/uso terapéutico , Anciano , Antifibrinolíticos/administración & dosificación , Artroplastía de Reemplazo de Hombro/métodos , Transfusión Sanguínea , Volumen Sanguíneo , Método Doble Ciego , Femenino , Hemoglobinas/metabolismo , Humanos , Inyecciones Intravenosas , Masculino , Persona de Mediana Edad , Hemorragia Posoperatoria/terapia , Periodo Posoperatorio , Estudios Prospectivos , Ácido Tranexámico/administración & dosificaciónRESUMEN
The purpose of this study was to compare reverse total shoulder arthroplasty (RTSA) outcomes in normal weight, overweight, and obese patients. A RTSA outcomes registry was reviewed for rotator cuff-deficient patients with a minimum 2-year follow-up. Fractures, rheumatoid arthritis, and revisions were excluded. Based on World Health Organization body mass index (BMI) classification, there were 29 normal weight, 50 overweight, and 51 obese patients. All groups demonstrated significant improvements from preoperative to most recent follow-up in function scores, pain, and forward elevation. Obese and overweight groups had significantly worse preoperative rotation than the normal weight group. Postoperatively, there was no significant difference in absolute values or degree of improvement of rotation between groups. There was no significant difference in the incidence of radiographic or clinical complications between groups. Results of this study suggest that BMI has little influence on outcomes or risk of complication following RTSA. Longer-term studies are needed to determine if these results are maintained. (Journal of Surgical Orthopaedic Advances.
Asunto(s)
Artroplastía de Reemplazo de Hombro , Índice de Masa Corporal , Evaluación del Resultado de la Atención al Paciente , Rango del Movimiento Articular , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Masculino , Persona de Mediana Edad , Sistema de RegistrosRESUMEN
Video recordings of surgical procedures are an excellent tool for presentations, analyzing self-performance, illustrating publications, and educating surgeons and patients. Recording the surgeon's perspective with high-resolution video in the operating room or clinic has become readily available and advances in software improve the ease of editing these videos. A GoPro HERO 4 Silver or Black was mounted on a head strap and worn over the surgical scrub cap, above the loupes of the operating surgeon. Five live surgical cases were recorded with the camera. The videos were uploaded to a computer and subsequently edited with iMovie or the GoPro software. The optimal settings for both the Silver and Black editions, when operating room lights are used, were determined to be a narrow view, 1080p, 60 frames per second (fps), spot meter on, protune on with auto white balance, exposure compensation at -0.5, and without a polarizing lens. When the operating room lights were not used, it was determined that the standard settings for a GoPro camera were ideal for positioning and editing (4K, 15 frames per second, spot meter and protune off). The GoPro HERO 4 provides high-quality, the surgeon perspective, and a cost-effective video recording of upper extremity surgical procedures. Challenges include finding the optimal settings for each surgical procedure and the length of recording due to battery life limitations.
Asunto(s)
Mano/cirugía , Monitoreo Intraoperatorio/métodos , Procedimientos Ortopédicos/métodos , Extremidad Superior/cirugía , Grabación en Video/instrumentación , Diseño de Equipo , Femenino , Humanos , Masculino , Monitoreo Intraoperatorio/instrumentación , Muestreo , Sensibilidad y Especificidad , Grabación en Video/métodosRESUMEN
BACKGROUND: Reverse total shoulder arthroplasty (RTSA) allows the deltoid to substitute for the nonfunctioning rotator cuff. To date, it is unknown whether preoperative deltoid and rotator cuff parameters correlate with clinical outcomes. QUESTIONS/PURPOSES: We asked whether associations exist between 2-year postoperative results (ROM, strength, and outcomes scores) and preoperative (1) deltoid size; (2) fatty infiltration of the deltoid; and/or (3) fatty infiltration of the rotator cuff. METHODS: A prospective RTSA registry was reviewed for patients with cuff tear arthropathy or massive rotator cuff tears, minimum 2-year followup, and preoperative shoulder MRI. Final analysis included 30 patients (average age, 71±10 years; eight males, 22 females). Only a small proportion of patients who received an RTSA at our center met inclusion and minimum followup requirements (30 of 222; 14%); however, these patients were found to be similar at baseline to the overall group of patients who underwent surgery in terms of age, gender, and preoperative outcomes scores. The cross-sectional area of the anterior, middle, and posterior deltoid was measured on axial proton density-weighted MRI. Fatty infiltration of the deltoid, supraspinatus, infraspinatus, teres minor, and subscapularis were quantitatively assessed on sagittal T1-weighted MR images. Patients were followed for Constant-Murley score, American Shoulder and Elbow Surgeons (ASES) scores, subjective shoulder value, pain, ROM, and strength. Correlations of muscle parameters with all outcomes measures were calculated. RESULTS: Preoperative deltoid size correlated positively with postoperative Constant-Murley score (67.27±13.07) (ρ=0.432, p=0.017), ASES (82.64±14.25) (ρ=0.377; p=0.40), subjective shoulder value (82.67±17.89) (ρ=0.427; p=0.019), and strength (3.72 pounds±2.99 pounds) (ρ=0.454; p=0.015). Quantitative deltoid fatty infiltration (7.91%±4.32%) correlated with decreased postoperative ASES scores (ρ=-0.401; p=0.047). Quantitative fatty infiltration of the infraspinatus (30.47%±15.01%) correlated with decreased postoperative external rotation (34.13°±16.80°) (ρ=-0.494; p=0.037). CONCLUSIONS: Larger preoperative deltoid size correlates with improved validated outcomes scores, whereas fatty infiltration of the deltoid and infraspinatus may have deleterious effects on validated outcomes scores and ROM after RTSA. The current study is a preliminary exploration of this topic; future studies should include prospective enrollment and standardized MRI with a multivariate statistical approach. Quantitative information attained from preoperative imaging not only holds diagnostic value, but, should future studies confirm our findings, also might provide prognostic value. This information may prove beneficial in preoperative patient counseling and might aid preoperative and postoperative decision-making by identifying subpopulations of patients who may benefit by therapy aimed at improving muscle properties. LEVEL OF EVIDENCE: Level III, prognostic study.
Asunto(s)
Tejido Adiposo/patología , Artroplastia de Reemplazo , Músculo Deltoides/patología , Manguito de los Rotadores/patología , Anciano , Anciano de 80 o más Años , Artroplastia de Reemplazo/métodos , Femenino , Humanos , Imagen por Resonancia Magnética , Masculino , Persona de Mediana Edad , Periodo Preoperatorio , Rango del Movimiento Articular , Estudios Retrospectivos , Articulación del Hombro/fisiopatología , Resultado del TratamientoRESUMEN
BACKGROUND: The purpose of this study was to explore relationships between damage modes in explanted reverse total shoulder arthroplasty (RTSA) components, patient and radiographic risk factors, and functional data to elucidate trends in RTSA failure. METHODS: Fifty RTSA systems, retrieved from 44 patients, with 50 polyethylene (PE) liners, 30 glenospheres, 21 glenoid baseplates, 13 modular humeral metaphases, and 17 humeral stems, were examined for damage modes, including abrasion, burnishing, dishing, embedding, scratching, and pitting. PE liners were also analyzed for delamination and edge deformation. Charts were reviewed for patient, surgical, and functional data. Pre-revision radiographs were analyzed for scapular notching and loosening. RESULTS: Average term of implantation was 20 months (range, 0-81 months). Metallic components exhibited abrasion, burnishing, dishing, pitting, and scratching. PE liners displayed all damage modes. Damage was exhibited on 93% of glenospheres and 100% of PE liners. Of 29 aseptic shoulders, 13 showed evidence of scapular notching and 5 of humeral loosening. There was a moderate correlation between radiographically observed implant failure or dissociation and PE embedding (r = 0.496; P < .001). There were weak and moderate correlations between scapular notching severity and PE dishing (r = 0.496; P = .006), embedding (r = 0.468; P = .010), and delamination (r = 0.384; P = .040). CONCLUSIONS: To date, this is the largest series of retrieved RTSA components and the first to relate damage modes to radiographic and clinical data. Most damage was observed on the PE liners, on both the articular surface and rim, and glenosphere components. Correlation of retrieval findings with radiographic and clinical data may help establish predictors of prostheses at risk for failure.
Asunto(s)
Artroplastia de Reemplazo/efectos adversos , Artropatías/cirugía , Prótesis Articulares , Rango del Movimiento Articular/fisiología , Articulación del Hombro , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Artropatías/diagnóstico por imagen , Artropatías/fisiopatología , Masculino , Persona de Mediana Edad , Diseño de Prótesis , Falla de Prótesis , Radiografía , Reoperación/tendencias , Factores de Riesgo , Articulación del Hombro/diagnóstico por imagen , Articulación del Hombro/fisiopatología , Articulación del Hombro/cirugíaRESUMEN
As the incidence of shoulder arthroplasty continues to rise, the orthopedic shoulder surgeon will be increasingly faced with the difficult problem of evaluating a failed shoulder arthroplasty. The patient is usually dissatisfied with the outcome of the previous arthroplasty as a result of pain, but may complain of poor function due to limited range of motion or instability. A thorough and systematic approach is necessary so that the most appropriate treatment pathway can be initiated. A comprehensive history and physical examination are the first steps in the evaluation. Diagnostic studies are numerous and include laboratory values, plain radiography, computed tomography, ultrasound imaging, joint aspiration, nuclear scans, and electromyography. Common causes of early pain after shoulder arthroplasty include technical issues related to the surgery, such as malposition or improper sizing of the prosthesis, periprosthetic infection, neurologic injury, and complex regional pain syndrome. Pain presenting after a symptom-free interval may be related to chronic periprosthetic infection, component wear and loosening, glenoid erosion, rotator cuff degeneration, and fracture. Poor range of motion may result from inadequate postoperative rehabilitation, implant-related factors, and heterotopic ossification. Instability is generally caused by rotator cuff deficiency and implant-related factors. Unfortunately, determining the cause of a failed shoulder arthroplasty can be difficult, and in many situations, the source of pain and disability is multifactorial.
Asunto(s)
Artroplastia de Reemplazo/efectos adversos , Artropatías/diagnóstico , Articulación del Hombro/cirugía , Humanos , Artropatías/etiología , Artropatías/cirugía , Artropatías/terapia , Falla de Prótesis , Rango del Movimiento Articular , Insuficiencia del TratamientoRESUMEN
BACKGROUND: Most studies of reverse total shoulder arthroplasty (RTSA) involve cemented humeral stems. To our knowledge, this is the first study to compare the results of cementless RTSA, using a porous-coated stem designed for uncemented fixation, with cemented RTSA. METHODS: A prospective database of patients undergoing RTSA was retrospectively reviewed for patients with a diagnosis of cuff tear arthropathy or severe rotator cuff deficiency with minimum 2-year follow-up. Of these, 37 patients had cemented RTSA and 64 patients had cementless RTSA. Outcome measures included Constant-Murley scores, American Shoulder and Elbow Surgeons scores, visual analog pain scale scores, range of motion, patient satisfaction, and radiographic evidence of complication. RESULTS: Compared with preoperative values, both cohorts demonstrated significant improvements (P < .01) in all functional scores, active forward elevation, and active internal rotation. There was no significant difference (P > .05) in comparing the changes in these values after surgery between the cemented and cementless cohorts. On radiographic evaluation, there was no evidence of loosening or humeral components "at risk" of loosening in either group. There was no significant difference (P = 1.0) in the incidence of humeral component radiolucent lines between the cemented and uncemented cohorts. There was no significant difference (P = .30) in the incidence of scapular notching between the cemented (n = 8) and uncemented (n = 10) cohorts. CONCLUSION: Cementless fixation of a porous-coated RTSA humeral stem provides clinical and radiographic outcomes equivalent to those of cemented stems at minimum 2-year follow-up. With advantages such as simplified operative technique, no cement-related complications, greater ease of revision, and long-lasting biologic fixation, uncemented fixation may provide several benefits over cemented fixation.
Asunto(s)
Artroplastia de Reemplazo/métodos , Artropatías/cirugía , Manguito de los Rotadores/cirugía , Articulación del Hombro/cirugía , Anciano , Anciano de 80 o más Años , Cementos para Huesos , Bases de Datos Factuales , Femenino , Estudios de Seguimiento , Humanos , Artropatías/diagnóstico por imagen , Masculino , Persona de Mediana Edad , Radiografía , Rango del Movimiento Articular , Estudios Retrospectivos , Lesiones del Manguito de los Rotadores , Articulación del Hombro/diagnóstico por imagen , Resultado del TratamientoRESUMEN
With the recent trends toward outpatient shoulder surgery, standardized protocols for perioperative analgesia are critical for reducing length of stay and optimizing outcomes. There are a variety of described anesthetic and analgesic options for shoulder surgery, and the literature is variable regarding optimal choice as patient, provider, and institutional factors often play a role. With general anesthesia alone becoming less utilized, regional methods require critical examination. Knowledge of the differing, and novel, regional anesthetic procedures in conjunction with recent orthopaedic and anesthetic literature is imperative to providing patients with optimal and efficient care.
RESUMEN
Background: To compare the complications and efficacy of pain relief of the interscalene anesthetic block using either a single-injection (SI) vs. a continuous, indwelling catheter (CIC) for arthroscopic rotator cuff repair surgery. Methods: Patients undergoing primary, arthroscopic rotator cuff repair without concomitant open procedure or biceps tenodesis were prospectively enrolled by 4 fellowship-trained sports medicine and shoulder surgeons. Patients received either a SI or CIC preoperatively based on surgeon preference. Patients were contacted by phone to complete a standard questionnaire on postoperative days (PODs) 1, 3, 7, 14, and 28. Patients were asked to rate the efficacy of their subjective pain relief (scale of 0-10), document issues with the catheter, describe analgesic usage, and report pharmacological and medical complications. The primary outcome was measured as complication rate. Postoperative narcotic use, patient satisfaction, and visual analog scale pain scores were measured as secondary outcomes. Results: Seventy patients were enrolled, 33 CIC patients (13 male, 20 female, mean age 61 ± 8 years) and 37 SI patients (20 male, 17 female, mean age 59 ± 10 years). There were significantly more injection/insertion site complications in the CIC group (48%) vs. the SI group (11%, P = .001). The incidence of motor weakness was higher in the CIC group on POD 1 (P = .034), but not at any subsequent time points. On POD 1, CIC patients had a clinically significantly lower pain score compared to SI (3.2 vs. 5.4; P = .020). Similar scores were observed at subsequent time points until POD 28, when CIC again had a lower pain score (0.8 vs. 2.7; P = .005). However, this did not reach clinical significance. All patients in both groups rated a satisfaction of 9 or 10 (scale 0-10) with the anesthesia provided by their nerve block. Conclusion: CIC interscalene nerve blocks had an increased risk for injection site complications and minor complications in the immediate postoperative period when using the CIC for arthroscopic rotator cuff repair without any concomitant open procedures. CIC blocks demonstrated clinically significant superior pain relief on POD 1 but were equal to SI blocks at every time point thereafter. Superior pain relief of CIC at POD 28 was not clinically significant. CIC catheters do not appear to markedly decrease the use of postoperative narcotics. Despite this trend in complication rates and pain scores, all patients in both groups were satisfied with their nerve block.
RESUMEN
BACKGROUND: Baumann's angle (BA) is the most common radiographic measurement used to assess coronal plane alignment of the distal humerus. However, it can vary greatly based on the x-ray beam angle, which can lead to multiple radiographs causing excessive radiation exposure, cost, and discomfort for the acutely injured child. The lateral capitellohumeral angle is a measure of sagittal plane alignment, and its variability has been reported. In this study, we sought to determine whether there were surrogate measures that could act as internal controls for the angle of the x-ray beam to give an accurate BA. METHODS: Elbow radiographs from uninjured children stratified by age into 6 groups were reviewed. BA and lateral capitellohumeral angle as well as several predetermined measurements that could be potential surrogate measures for the angle of the x-ray beam were performed. Statistical significance was found between BA and radial-ulnar overlap (RUO), which was analyzed further and plotted in linear graph fashion. RESULTS: The Pearson correlation coefficient (0.58) between BA and RUO was significant at P=0.001. The average BA was 71±7.2 degrees (1 SD) and the average RUO was 0.34±0.26. The following linear graph equation was obtained to define the relationship between RUO and BA: BA=12.36 (RUO)+67. Further derivation gives us an equation to "correct" BA for a given RUO: corrected BA=measured BA-12.36 (RUO-0.34). Application of this formula lessened the SD of BA from 7.2 to 5.9 degrees and decreased the percentage of BA measurements outside of 1 SD from 30% to 14%. CONCLUSIONS: RUO is a reliable surrogate measure to control for the angle of the x-ray beam and improve the reliability when measuring BA that can be easily applied in the clinical setting. CLINICAL RELEVANCE: The ability to accurately correct the BA based on a given RUO gives the physician the confidence to adequately interpret imperfect radiographs in the emergency room setting and minimize repeat radiographs.
Asunto(s)
Húmero/diagnóstico por imagen , Radio (Anatomía)/diagnóstico por imagen , Cúbito/diagnóstico por imagen , Factores de Edad , Niño , Preescolar , Codo/diagnóstico por imagen , Femenino , Humanos , Lactante , Masculino , Radiografía , Reproducibilidad de los ResultadosRESUMEN
BACKGROUND: Baumann angle (BA) is a common measure of coronal plane alignment of the distal humerus. We hypothesize that the reliability of measuring BA would be improved by using the medial and lateral cortical margins of the humerus seen on plain x-ray, rather than the estimated central humeral line, which is the "standard" technique. Further, we analyze whether the amount of humerus visible on the film improves the reliability of the method. METHODS: A total of 71 anteroposterior elbow digital radiographs from patients aged 0 to 12 were measured 3 times by 5 qualified observers. Each digital measurement included (1) BA using the estimated central humeral line; (2) BA using the medial humeral line (BA-MHL); and (3) BA using the lateral humeral line (BA-LHL). Inadequate radiographs or those showing any indication of current or previous fracture were excluded. Intraobserver reliability was estimated for each rater using a 1-way analysis of variance model and interobserver reliability of each set of measurements was estimated using a 2-way analysis of variance. RESULTS: The mean and SD for the BA, BA-MHL, and BA-LHL in females were 70.0 (6.73), 68.0 (6.84), and 72.3 (7.93), respectively, and for males 73.0 (5.22), 70.0 (5.56), and 76.0 (6.18), respectively. Intraobserver reliability (intraclass correlation coefficient) for BA, BA-MHL, and BA-LHL averaged 0.85, 0.92, and 0.90, respectively. Average interobserver reliability (intraclass correlation coefficient) for BA, BA-MHL, and BA-LHL were 0.79, 0.71, and 0.76, respectively. Intraobserver and interobserver reliability of BA and BA-LHL were significantly improved when at least 7 cm of humerus was visible on the x-ray, as compared with <7 cm visible. CONCLUSIONS: Intrarater reliability is better for both BA-LHL and BA-MHL than for standard BA (using the estimated central humeral axis). Interrater reliability was best using standard BA. Reliability of all methods is improved when >7 cm of the distal humerus is visible on the radiograph. In addition, at least 7 cm of the distal humerus on anteroposterior radiographs improves reliability of measuring BA. LEVEL OF EVIDENCE: Diagnostic study-Level II.
Asunto(s)
Fracturas del Húmero/diagnóstico por imagen , Húmero/diagnóstico por imagen , Análisis de Varianza , Niño , Preescolar , Femenino , Humanos , Lactante , Masculino , Variaciones Dependientes del Observador , Radiografía , Reproducibilidad de los Resultados , Factores SexualesRESUMEN
Plastic deformation of the forearm is a rare injury in young adults that occurs when a slow bending or rotational force is applied to the arm, most commonly in the setting of an industrial workplace accident. There are currently no guidelines for treatment of the residual forearm deformity that often results in limitations of forearm supination and pronation. We present 2 cases demonstrating that deformity correction with single cortex, double-level osteotomies combined with rigid plate fixation and early range of motion exercise that results in good functional outcomes.
Asunto(s)
Traumatismos del Brazo/cirugía , Desviación Ósea/cirugía , Fijación Interna de Fracturas/métodos , Osteotomía/métodos , Fracturas del Radio/cirugía , Fracturas del Cúbito/cirugía , Adolescente , Adulto , Traumatismos del Brazo/diagnóstico por imagen , Desviación Ósea/diagnóstico por imagen , Desviación Ósea/etiología , Placas Óseas , Femenino , Estudios de Seguimiento , Fijación Interna de Fracturas/efectos adversos , Fijación Interna de Fracturas/instrumentación , Humanos , Masculino , Cuidados Posoperatorios/métodos , Complicaciones Posoperatorias/diagnóstico por imagen , Complicaciones Posoperatorias/cirugía , Radiografía , Fracturas del Radio/diagnóstico por imagen , Recuperación de la Función , Reoperación , Medición de Riesgo , Factores de Tiempo , Resultado del Tratamiento , Fracturas del Cúbito/diagnóstico por imagen , Adulto JovenRESUMEN
BACKGROUND: Angular deformity is the most common complication of supracondylar humerus fracture. Baumann's angle (BA) is an established radiographic measure of coronal plane deformity after this injury. Numerous radiographic methods have been used to assess sagittal plane deformity, however, the mean, variability, and reliability of these measures has not been established. The purpose of this study was to determine the mean, SD, and intraobserver/interobserver reliability of the lateral capitellohumeral angle (LCHA) in children without evidence of fracture and compare them with those of BA. METHODS: Seventy-one sets of anteroposterior and lateral elbow radiographs were selected and stratified into 6-year age categories with equal number of males and females in each category. Five physicians performed 3 separate measurements of LCHA and BA on each film set. Statistical calculations were performed to determine mean, SD, measurement reliability, and differences between patients groups. RESULTS: The mean LCHA ±1 SD and BA ± 1 SD measurements were 50.8 ± 6 degrees and 71.5 ± 6.2 degrees, respectively, and did not vary significantly by age, side, or sex (P>0.05). The LCHA showed good intraobserver (correlation coefficient 0.67) and fair interobserver (0.37) reliability, whereas BA showed excellent intraobserver (0.86) and interobserver (0.80) reliability. The expected SD for repeated measurement of a radiograph by a single observer was 2.6 degrees for BA and 5.2 degrees for LCHA. CONCLUSIONS: The LCHA is a simple measurement to perform using digital tools. In normal elbows, the mean angle is 51 ± 6 degrees and does not vary by age, side, or sex. LCHA variability in normal elbow radiographs is similar to BA. Its reliability is inferior to BA, but improves with age. Sagittal angulation abnormality of at least 12 degrees (<39 or >63 degrees) is necessary to be confident that the change is not because of measurement error alone. Further research is needed to better define the relationship of sagittal plane angular deformity to clinical outcome. LEVEL OF EVIDENCE: Diagnostic study with poor reference standard, Level IV.
Asunto(s)
Articulación del Codo/diagnóstico por imagen , Fracturas del Húmero/diagnóstico por imagen , Húmero/diagnóstico por imagen , Factores de Edad , Niño , Preescolar , Femenino , Humanos , Fracturas del Húmero/patología , Húmero/patología , Lactante , Masculino , Variaciones Dependientes del Observador , Radiografía , Reproducibilidad de los ResultadosRESUMEN
BACKGROUND: The purpose of this study was to compare the accuracy of anatomic reconstruction of three different humeral head designs after anatomic total shoulder arthroplasty. METHODS: Postoperative radiographs of 117 patients who underwent anatomic total shoulder arthroplasty with three different implant designs (stemmed spherical, stemless spherical, and stemless elliptical) were analyzed for landmarks that represented the prearthritic state and final implant position. We assessed the change in center of rotati7on and humeral head height on the anteroposterior view and the percentage of prosthesis overhang on the axillary lateral view. A modified anatomic reconstruction index, a compound score that rated each of the 3 parameters from 0 to 2, was created to determine the overall accuracy of the reconstruction. RESULTS: Excellent modified anatomic reconstruction index scores (5 or 6 points) were achieved by 68.1% of the cases in the stemless elliptical group compared with 33.3% of the cases in the stemless spherical group and by 28.3% of the cases in the stemmed spherical group (P = .001).The mean difference in restoration of humeral head height (P < .001) and percentage of prosthesis overhang (P < .001) was superior for the stemless elliptical group compared with the two other spherical head groups. There was no difference between groups for the shift in center of rotation (P = .060). CONCLUSIONS: In this radiographic investigation comparing three different humeral head designs with respect to anatomic restoration parameters, the stemless elliptical implant more closely restored the geometry of the prearthritic humeral head as assessed by humeral head height, prosthesis overhang, and a compound reconstruction score.
RESUMEN
BACKGROUND: Few studies have investigated the biomechanical performance of flat-braided suture tapes versus round-braided sutures after being knotted. PURPOSE: To compare the loop security and knot strength of a standard round-braided suture with 3 commercially available flat-braided suture tapes using 2 types of arthroscopic knots. STUDY DESIGN: Controlled laboratory study. METHODS: One standard suture (SS) and 3 suture tapes (T1, T2, and T3) were tied with the surgeon's knot (SK) and the Tennessee slider (TS), 25 times each, by a single surgeon. Each combination of knots and sutures underwent a preload, cyclic loading, and load to failure. Outcomes were loop security (defined by loop stretch after a 5-N preload), load at clinical failure (3 mm of displacement), and load at ultimate failure (suture rupture or knot slippage). Two-way analysis of variance was used for analysis. RESULTS: Overall, the SK group had greater overall loop security than that of the TS group (0.4 ± 0.3 vs 0.5 ± 0.3 mm of stretch, respectively; P = .020). The clinical failure load varied by suture type (P < .001) but not knot type (P = .106). For both knot types, the SS had the lowest mean ± SD clinical failure load (SK, 171 ± 49 N; TS, 176 ± 37 N), which was significantly less than that of T2 (247 ± 85 N; P < .001) and T3 (251 ± 96 N; P < .001) for the SK type and T2 (231 ± 67 N; P = .023) for the TS type. T2 sutures had the greatest ultimate failure load for both knot types (SK, 418 ± 45 N; TS, 461 ± 57 N), which was significantly greater than SS, T1, and T3 (P < .001 for all). The TS knot had greater overall ultimate failure load than the SK (375 ± 64 vs 350 ± 66 N; P < .001). CONCLUSION: Not all suture tape knots had the same biomechanical properties, although knot security and strength appeared to be adequate for all suture tapes as well as for SS. There was no evidence that suture tape knots are lower profile than SS knots. CLINICAL RELEVANCE: Surgeons should not use suture tape based only on the assumption that it has superior biomechanical properties to a standard round-braided suture.
RESUMEN
PURPOSE: Bryant's traction is the most commonly used method for immobilization after bladder exstrophy repair. We hypothesized that spica casting is a safe and effective alternative to Bryant's traction after complete primary repair of exstrophy. MATERIALS AND METHODS: Complete primary repair of exstrophy was performed for initial repair in 39 consecutive children by all surgeons at Seattle Children's Hospital since 1998. Three sequential cohorts were evaluated-Bryant's traction without osteotomy (13 patients), spica casting without osteotomy (14) and spica casting with osteotomy. These 3 sequential cohorts represent eras of care and an evolution of practice. Primary outcomes included major complications related to immobilization, dehiscence, urinary incontinence and length of stay. We defined complications of immobilization as nonunion of pelvic osteotomy, femoral nerve palsy, revision of spica cast requiring return to the operating room, infection at the osteotomy site and activity limiting pain at the osteotomy site. Fisher's exact test or t test was used to determine statistical significance. RESULTS: There was no difference in urinary continence (p = 0.09). Use of Bryant's traction was associated with double the length of stay (p >0.001). There was no correlation of major complications to the type of immobilization used. CONCLUSIONS: Spica casting compared to Bryant's traction is associated with shorter hospitalization following complete primary repair of exstrophy and does not have a significant difference in the rate of complications. In our longitudinal cohort study with long-term followup spica cast was safe and effective for patients with bladder exstrophy, and should be considered an acceptable method of immobilization.
Asunto(s)
Extrofia de la Vejiga/cirugía , Moldes Quirúrgicos , Restricción Física/instrumentación , Restricción Física/métodos , Tracción/instrumentación , Tracción/métodos , Moldes Quirúrgicos/efectos adversos , Femenino , Humanos , Recién Nacido , Estudios Longitudinales , Masculino , Cuidados Posoperatorios , Restricción Física/efectos adversos , Procedimientos Quirúrgicos Urológicos/efectos adversos , Procedimientos Quirúrgicos Urológicos/métodosRESUMEN
PURPOSE OF REVIEW: Baseplate fixation has been known to be the weak link in reverse total shoulder arthroplasty (RTSA). A wide variety of different baseplates options are currently available. This review investigates the recent literature to present the reader with an overview of the currently available baseplate options and modes of fixation. RECENT FINDINGS: The main elements that differentiate baseplates are the central fixation element, the size of the baseplate, the shape, the backside geometry, whether or not an offset central fixation exists, the number of peripheral screws, and the availability of peripheral augmentation. The wide array of baseplate options indicates that no particular design has proven superiority. As such, surgeons should be aware of their options and choose an implant that the surgeon is comfortable with and one that best suits the individual patient anatomy. With the growing number of RTSA procedures and registries with long-term follow-up, future investigations will hopefully delineate the ideal baseplate design to optimize survivorship.