In situ study of the evolution of NiFe nanocatalysts in reductive and oxidative environments upon thermal treatments.

The conversion of biomass as a sustainable path to access valuable chemicals and fuels is very attractive for the chemical industry, but catalytic conversions still often rely on the use of noble metals. Sustainability constraints require developing alternative catalysts from abundant and low-cost metals. In this context, NiFe nanoparticles are interesting candidates. In their reduced and supported form, they have been reported to be more active and selective than monometallic Ni in the hydrogenation of the polar functions of organic molecules, and the two metals are very abundant. However, unlike noble metals, Ni and Fe are easily oxidized in ambient conditions, and understanding their transformation in both oxidative and reductive atmospheres is an important though seldom investigated issue to be addressed before their application in catalysis. Three types of NiFe nanoparticles were prepared by an organometallic approach to ensure the formation of ultrasmall nanoparticles (<3.5 nm) with a narrow size distribution, controlled composition and chemical order, while working in mild conditions: Ni2Fe1 and Ni1Fe1, both with a Ni rich core and Fe rich surface, and an alloy with a Ni1Fe9 composition. Supported systems were obtained by the impregnation of silica with a colloidal solution of the preformed nanoparticles. Using advanced characterization techniques, such as wide-angle X-ray scattering (WAXS) and X-ray absorption spectroscopy (XAS) in in situ conditions, this study reports on the evolution of the chemical order and of the oxidation state of the metals upon exposure to air, hydrogen, and/or increasing temperature, all factors that may affect their degree of reduction and subsequent performance in catalysis. We show that if oxidation readily occurs upon exposure to air, the metals can revert to their initial state upon heating in the presence of H2 but with a change in structure and chemical ordering.

Corn Cob as a Green Support for Laccase Immobilization-Application on Decolorization of Remazol Brilliant Blue R.

The high demand for food and energy imposed by the increased life expectancy of the population has driven agricultural activity, which is reflected in the larger quantities of agro-industrial waste generated, and requires new forms of use. Brazil has the greatest biodiversity in the world, where corn is one of the main agricultural genres, and where over 40% of the waste generated is from cobs without an efficient destination. With the aim of the valorization of these residues, we proposed to study the immobilization of laccase from Aspergillus spp. (LAsp) in residual corn cob and its application in the degradation of Remazol Brilliant Blue R (RBBR) dye. The highest yields in immobilized protein (75%) and residual activity (40%) were obtained at pH 7.0 and an enzyme concentration of 0.1 g.mL-1, whose expressed enzyme activity was 1854 U.kg-1. At a temperature of 60 °C, more than 90% of the initial activity present in the immobilized biocatalyst was maintained. The immobilized enzyme showed higher efficiency in the degradation (64%) of RBBR dye in 48 h, with improvement in the process in 72 h (75%). The new biocatalyst showed operational efficiency during three cycles, and a higher degradation rate than the free enzyme, making it a competitive biocatalyst and amenable to industrial applications.

Strengthening the Connection between Science, Society and Environment to Develop Future French and European Bioeconomies: Cutting-Edge Research of VAALBIO Team at UCCS.

The development of the future French and European bioeconomies will involve developing new green chemical processes in which catalytic transformations are key. The VAALBIO team (valorization of alkanes and biomass) of the UCCS laboratory (Unité de Catalyse et Chimie du Solide) are working on various catalytic processes, either developing new catalysts and/or designing the whole catalytic processes. Our research is focused on both the fundamental and applied aspects of the processes. Through this review paper, we demonstrate the main topics developed by our team focusing mostly on oxygen- and hydrogen-related processes as well as on green hydrogen production and hybrid catalysis. The social impacts of the bioeconomy are also discussed applying the concept of the institutional compass.

How Catalysts and Experimental Conditions Determine the Selective Hydroconversion of Furfural and 5-Hydroxymethylfurfural.

Furfural and 5-hydroxymethylfurfural stand out as bridges connecting biomass raw materials to the biorefinery industry. Their reductive transformations by hydroconversion are key routes toward a wide variety of chemicals and biofuels, and heterogeneous catalysis plays a central role in these reactions. The catalyst efficiency highly depends on the nature of metals, supports, and additives, on the catalyst preparation procedure, and obviously on reaction conditions to which catalyst and reactants are exposed: solvent, pressure, and temperature. The present review focuses on the roles played by the catalyst at the molecular level in the hydroconversion of furfural and 5-hydroxymethylfurfural in the gas or liquid phases, including catalytic hydrogen transfer routes and electro/photoreduction, into oxygenates or hydrocarbons (e.g., furfuryl alcohol, 2,5-bis(hydroxymethyl)furan, cyclopentanone, 1,5-pentanediol, 2-methylfuran, 2,5-dimethylfuran, furan, furfuryl ethers, etc.). The mechanism of adsorption of the reactant and the mechanism of the reaction of hydroconversion are correlated to the specificities of each active metal, both noble (Pt, Pd, Ru, Au, Rh, and Ir) and non-noble (Ni, Cu, Co, Mo, and Fe), with an emphasis on the role of the support and of additives on catalytic performances (conversion, yield, and stability). The reusability of catalytic systems (deactivation mechanism, protection, and regeneration methods) is also discussed.

Insights into the active surface species formed on Ta2O5 nanotubes in the catalytic oxidation of CO.

Freestanding Ta2O5 nanotubes were prepared by an anodizing method. As-anodized amorphous nanotubes were calcined at high temperature to obtain a crystalline phase. All materials were studied by means of BET analysis, XRD, TEM, SEM, XPS, and FTIR and were evaluated in the catalytic oxidation of CO. An XPS study confirmed the formation of different tantalum surface species after high temperature treatment of amorphous Ta2O5 nanotubes. Calcination at 800 °C generated Ta(4+) while higher temperature (1000 °C) treatment led to the formation of Ta(3+) species. These materials also showed significant differences in catalytic activity. Higher activity was observed for samples calcined at 800 °C than at 1000 °C, suggesting that Ta(4+) species are active sites for CO oxidation.

In situ growth of N-doped carbon nanotubes from the products of graphitic carbon nitride etching by nickel nanoparticles.

The in situ growth of N-doped multi-walled carbon nanotubes (N-MWCNTs) from the products of graphitic carbon nitride (g-C3N4) etching by Ni nanoparticles in a hydrogen atmosphere has been confirmed for the first time. During the etching process of g-C3N4, the building blocks, notably methane, ammonia, and hydrogen cyanide, are formed. The formation of N-MWCNTs was confirmed by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning (SEM) and transmission electron microscopy (TEM). A sponge-like carbonaceous structure was obtained with a specific surface area of 384 m2 g-1 from initial g-C3N4 (32 m2 g-1).

Advancing Lignocellulosic Biomass Fractionation through Molten Salt Hydrates: Catalyst-Enhanced Pretreatment for Sustainable Biorefineries.

Developing a process that performs the lignocellulosic biomass fractionation under milder conditions simultaneously with the depolymerization and/or the upgrading of all fractions is fundamental for the economic viability of future lignin-first biorefineries. The molten salt hydrates (MSH) with homogeneous or heterogeneous catalysts are a potential alternative to biomass pretreatment that promotes cellulose's dissolution and its conversion to different platform molecules while keeping the lignin reactivity. This review investigates the fractionation of lignocellulosic biomass using MSH to produce chemicals and fuels. First, the MSH properties and applications are discussed. In particular, the use of MSH in cellulose dissolution and hydrolysis for producing high-value chemicals and fuels is presented. Then, the biomass treatment with MSH is discussed. Different strategies for preventing sugar degradation, such as biphasic media, adsorbents, and precipitation, are contrasted. The potential for valorizing isolated lignin from the pretreatment with MSH is debated. Finally, challenges and limitations in utilizing MSH for biomass valorization are discussed, and future developments are presented.

Strategies to improve hydrogen activation on gold catalysts.

Catalytic reactions involving molecular hydrogen are at the heart of many transformations in the chemical industry. Classically, hydrogenations are carried out on Pd, Pt, Ru or Ni catalysts. However, the use of supported Au catalysts has garnered attention in recent years owing to their exceptional selectivity in hydrogenation reactions. This is despite the limited understanding of the physicochemical aspects of hydrogen activation and reaction on Au surfaces. A rational design of new improved catalysts relies on making better use of the hydrogenating properties of Au. This Review analyses the strategies utilized to improve hydrogen-Au interactions, from addressing the importance of the Au particle size to exploring alternative mechanisms for H2 dissociation on Au cations and Au-ligand interfaces. These insights hold the potential to drive future applications of Au catalysis.

Supported Gold Catalysts for Base-Free Furfural Oxidation: The State of the Art and Machine-Learning-Enabled Optimization.

Supported gold nanoparticles have proven to be highly effective catalysts for the base-free oxidation of furfural, a compound derived from biomass. Their small size enables a high surface-area-to-volume ratio, providing abundant active sites for the reaction to take place. These gold nanoparticles serve as catalysts by providing surfaces for furfural molecules to adsorb onto and facilitating electron transfer between the substrate and the oxidizing agent. The role of the support in this reaction has been widely studied, and gold-support interactions have been found to be beneficial. However, the exact mechanism of furfural oxidation under base-free conditions remains an active area of research and is not yet fully understood. In this review, we delve into the essential factors that influence the selectivity of furfural oxidation. We present an optimization process that highlights the significant role of machine learning in identifying the best catalyst for this reaction. The principal objective of this study is to provide a comprehensive review of research conducted over the past five years concerning the catalytic oxidation of furfural under base-free conditions. By conducting tree decision making on experimental data from recent articles, a total of 93 gold-based catalysts are compared. The relative variable importance chart analysis reveals that the support preparation method and the pH of the solution are the most crucial factors determining the yield of furoic acid in this oxidation process.

Getting Greener with the Synthesis of Nanoparticles and Nanomaterials.

The nanoscale level is bridging the gap between molecular level and crystal-based solid-state structures [...].

Reductive Modification of Carbon Nitride Structure by Metals-The Influence on Structure and Photocatalytic Hydrogen Evolution.

Pt, Ru, and Ir were introduced onto the surface of graphitic carbon nitride (g-C3N4) using the wet impregnation method. A reduction of these photocatalysts with hydrogen causes several changes, such as a significant increase in the specific surface area, a C/N atomic ratio, a number of defects in the crystalline structure of g-C3N4, and the contribution of nitrogen bound to the amino and imino groups. According to the X-ray photoelectron spectroscopy results, a transition layer is formed at the g-C3N4/metal nanoparticle interphase, which contains metal at a positive degree of oxidation bonded to nitrogen. These structural changes significantly enhanced the photocatalytic activity in the production of hydrogen through the water-splitting reaction. The activity of the platinum photocatalyst was 24 times greater than that of pristine g-C3N4. Moreover, the enhanced activity was attributed to significantly better separation of photogenerated electron-hole pairs on metal nanoparticles and structural distortions of g-C3N4.

Lipase-catalyzed acylation of levoglucosan in continuous flow: antibacterial and biosurfactant studies.

Studies involving the transformation of lignocellulosic biomass into high value-added chemical products have been intensively conducted in recent years. Its matrix is mainly composed of cellulose, hemicellulose and lignin, being, therefore, an abundant and renewable source for obtaining several platform molecules, with levoglucosan (LG) standing out. This anhydrous carbohydrate can be acylated to obtain carbohydrate fatty acid esters (CFAEs). Here, these compounds were obtained via enzymatic acylation of LG, commercially obtained (Start BioScience®), with different acyl donors in continuous flow. Through the experimental design using a model reaction, it was possible to optimize the reaction conditions, temperature and residence time, obtaining a maximum conversion at 61 °C and 77 min. In addition, there was a productivity gain of up to 100 times in all comparisons made with the batch system. Finally, CFAEs were applied in tests of interfacial tension and biological activity. For a mixture of 4- and 2-O-lauryl-1,6-anhydroglucopyranose (MONLAU), the minimum interfacial tension (IFTmin) obtained was 96 mN m-1 and the critical micelle concentration (CMC) was 50 mM. Similar values were obtained for a mixture of 4- and 2-O-palmitoyl-1,6-anhydroglucopyranose (MONPAL), not yet reported in the literature, of 88 mN m-1 in 50 mM. For a mixture of 4- and 2-O-estearyl-1,6-anhydroglucopyranose (MONEST) and 4- and 2-O-oleoyl-1,6-anhydroglucopyranose (MONOLE), CMC was higher than 60 mM and IFTmin of 141 mN m-1 and 102 mN m-1, respectively. Promising data were obtained for minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of MONLAU against Staphylococcus aureus strains at 0.25 mM.

Effect of Modification of Amorphous Silica with Ammonium Agents on the Physicochemical Properties and Hydrogenation Activity of Ir/SiO2 Catalysts.

The modification of commercial silica with solutions of NH4F or NH4Cl salts, followed by thermal treatment, enabled generation of the acidic sites in SiO2 and changed its textural properties. The use of ammonium salts solution also caused the generation of additional porosity. Using NH4F solution caused significant decrease in the specific surface area and the increase in the average pore diameter. The number and strength of resulting acid sites depend on the nature of anion in the applied ammonium salt and the concentration of salt solution. It has been found that the sample treated with NH4F presented higher total acidity (TPD-NH3) and the amount as well as the strength of acid sites increased with the concentration of the used modifier. As modified amorphous SiO2 materials used as a support for iridium (1 wt %, Ir(acac)3) nanoparticles permitted to obtain highly active catalysts for toluene hydrogenation under atmospheric pressure. The highest activity (expressed as the apparent rate and TOF) was obtained for iridium catalysts supported on silica modified by NH4F with the highest acidity. The modification of silica with NH4F favors the generation of centers able to adsorb toluene, which results in higher activity of this catalyst.

Studies of New Iridium Catalysts Supported on Modified Silicalite-1-Their Structure and Hydrogenating Properties.

This paper investigates the catalytic properties of the iridium catalysts supported on modified silicalite-1. Post-synthesis modification of silicalite-1, with solutions of ammonium compounds (NH4F and NH4OH), appeared to be an efficient method to generate the acidic sites in starting support. The modification of support led not only to changes in its acidity but also its porosity-formation of additional micro- and mesopores. The novel materials were used as supports for iridium. The iridium catalysts (1 wt.% Ir) were characterized by N2 adsorption/desorption measurements, temperature-programmed reduction with hydrogen (TPR-H2), H2 chemisorption, transmission electron microscopy (TEM), temperature-programmed desorption of ammonia (TPD-NH3), X-ray photoelectron spectroscopy (XPS) and tested in the hydrogenation of toluene reaction. The catalytic activity of iridium supported on silicalite-1 treated with NH4OH (higher porosity of support, better dispersion of active phase) was much higher than that of Ir supported on unmodified and modified with NH4F silicalite-1.

Highlights and challenges in the selective reduction of carbon dioxide to methanol.

Carbon dioxide (CO2) is the iconic greenhouse gas and the major factor driving present global climate change, incentivizing its capture and recycling into valuable products and fuels. The 6H+/6e- reduction of CO2 affords CH3OH, a key compound that is a fuel and a platform molecule. In this Review, we compare different routes for CO2 reduction to CH3OH, namely, heterogeneous and homogeneous catalytic hydrogenation, as well as enzymatic catalysis, photocatalysis and electrocatalysis. We describe the leading catalysts and the conditions under which they operate, and then consider their advantages and drawbacks in terms of selectivity, productivity, stability, operating conditions, cost and technical readiness. At present, heterogeneous hydrogenation catalysis and electrocatalysis have the greatest promise for large-scale CO2 reduction to CH3OH. The availability and price of sustainable electricity appear to be essential prerequisites for efficient CH3OH synthesis.

Agroindustrial Wastes as a Support for the Immobilization of Lipase from Thermomyces lanuginosus: Synthesis of Hexyl Laurate.

As a consequence of intense industrialization in the last few decades, the amount of agro-industrial wastes has increasing, where new forms of valorization are crucial. In this work, five residual biomasses from Maranhão (Brazil) were investigated as supports for immobilization of lipase from Thermomyces lanuginosus (TLL). The new biocatalysts BM-TLL (babaçu mesocarp) and RH-TLL (rice husk) showed immobilization efficiencies >98% and hydrolytic activities of 5.331 U g-1 and 4.608 U g-1, respectively, against 142 U g-1 by Lipozyme® TL IM. High esterification activities were also found, with 141.4 U g-1 and 396.4 U g-1 from BM-TLL and RH-TLL, respectively, against 113.5 U g-1 by TL IM. Results of porosimetry, SEM, and BET demonstrated BM and RH supports are mesoporous materials with large hydrophobic area, allowing a mixture of hydrophobic adsorption and confinement, resulting in hyperactivation of TLL. These biocatalysts were applied in the production of hexyl laurate, where RH-TLL was able to generate 94% conversion in 4 h. Desorption with Triton X-100 and NaCl confirmed that new biocatalysts were more efficient with 5 times less protein than commercial TL IM. All results demonstrated that residual biomass was able to produce robust and stable biocatalysts containing immobilized TLL with better results than commercial preparations.

Elucidating the structure of the graphitic carbon nitride nanomaterials via X-ray photoelectron spectroscopy and X-ray powder diffraction techniques.

By using the most popular method of thermal condensation of dicyandiamide in a semi-closed system, graphitic carbon nitrides (gCNs) were synthesized at 500, 550, and 600 °C. The resulting materials were comprehensively analyzed via X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction (XRD)techniques. We show that the use of routine analytical methods provides an insight into the structure of the carbon nitride materials. The analysis of geometric linear structures and fully condensed structure of polymeric carbon nitrides was performed and the ranges within which the contents of different nitrogen species (pyridine, amine, imine and quaternary nitrogen) can change were determined. This analysis, in combination with quantitative XPS studies, permits to state that the carbon nitride structure prepared by the thermal condensation of dicyandiamide is closer to the structure in which poly(aminoimino)heptazine subunits are linked into chains rather than the structure involving fully-condensed polyheptazine network. The XRD analysis proved that the 3D crystal structure of carbon nitride is described more correctly by the orthorhombic cell and space group P21212 applied to condensed chains of poly(aminoimino)heptazine (melon) and not by the hexagonal cell with the space group P6m2.

Recent Advances in Carboxylation of Furoic Acid into 2,5-Furandicarboxylic Acid: Pathways towards Bio-Based Polymers.

2,5-furandicarboxylic acid (FDCA) is one of the most important bio-sourced building blocks and several routes have been reported for its synthesis. FDCA is presumed to be an ideal green alternative to terephthalate, which is one of the predominant monomers in polymer industry. This Minireview concerns the synthesis of FDCA by using various carboxylation reactions and discusses the synthesis of FDCA starting from furoic acid and CO2 and using different catalytic and stoichiometric processes. This process is of high interest, as it avoids the glucose isomerization step and selectivity issues observed during the 5-hydroxymethylfurfural oxidation step of the current alternative route to FDCA. Discussion focuses on the main parameters that govern selectivity and activity in the carboxylation processes. Moreover, various previously described processes, such as the Henkel reaction and enzymatic, homogeneous catalytic, and photoelectrocatalytic processes, are also discussed.

Raman Spectroscopy Applied to Monitor Furfural Liquid-Phase Oxidation Catalyzed by Supported Gold Nanoparticles.

In this paper, Raman spectroscopy is used as a tool to study the mechanism of furfural oxidation using H2O2 as a reagent on gold nanoparticles (NPs) supported on hydrotalcites (HTs). This reaction was repeated, under the same conditions, but with different reaction times in a parallel multireactor system. The reaction media were analyzed using a macro device associated with a multipass cell permitting us to enhance the Raman signal by reflecting the laser beam 3 times. The Raman spectra showed the conversion of furfural to furoic acid without any chemical intermediates, thus privileging a direct pathway. Combining the results of the catalytic tests with those of the Raman study, the mechanism of furfural oxidation to furoic acid using gold NPs supported on HTs is proposed. The key points of this mechanism were found to be as follows: (i) the in situ formation of a base, originating from the Mg leaching from the HT support, initiates the oxidation of furfural by deprotonation; (ii) H2O2 used as a reagent in the solution increases the catalytic activity by its dissociation to form hydroxide ions; and (iii) the oxidation of furfural occurs on the surface of gold NPs and leads to higher furoic acid yield.

Lactic Acid Conversion to Acrylic Acid Over Fluoride-Substituted Hydroxyapatites.

One of the most interesting intermediates for the chemical industry is acrylic acid, which can be derived from lactic acid by catalytic dehydration in the gas phase. The realization of this reaction is complex due to a strong thermal activation leading to the formation of undesired by-products (acetaldehyde, propanoic acid…) as well as polymerization. We studied this reaction over hydroxyapatites modified by substitution of the hydroxyl groups by fluoride. This notably enabled increasing the selectivity to acrylic acid while reducing the formation of the undesired acetaldehyde. Introduction of fluoride induced a modification of the phosphate ( PO 4 3 - ) groups. In the presence of water, fluoride prevented the formation of hydrogenophosphate species ( HPO 4 2 - ), which are well-known acid sites responsible for the formation of acetaldehyde by decarboxylation/decarbonylation. Further, we evidenced an important impact of fluoride substitution on crystallinity, specific surface area and on the surface Ca/P ratio. This latter is known to be a key parameter to control the acidity and the basicity of the hydroxyapatites. Using FT-IR spectroscopy with propyne as a probe molecule, we could show that lactic acid was concertedly adsorbed on basic and acid sites, which might be at the origin of the observed superior performances.