Process design and development of a mammalian cell perfusion culture in shake-tube and benchtop bioreactors.

The development of mammalian cell perfusion cultures is still laborious and complex to perform due to the limited availability of scale-down models and limited knowledge of time- and cost-effective procedures. The maximum achievable viable cell density (VCDmax ), minimum cell-specific perfusion rate (CSPRmin ), cellular growth characteristics, and resulting bleed rate at steady-state operation are key variables for the effective development of perfusion cultures. In this study, we developed a stepwise procedure to use shake tubes (ST) in combination with benchtop (BR) bioreactors for the design of a mammalian cell perfusion culture at high productivity (23 pg·cell-1 ·day-1 ) and low product loss in the bleed (around 10%) for a given expression system. In a first experiment, we investigated peak VCDs in STs by the daily discontinuous medium exchange of 1 reactor volume (RV) without additional bleeding. Based on this knowledge, we performed steady-state cultures in the ST system using a working volume of 10 ml. The evaluation of the steady-state cultures allowed performing a perfusion bioreactor run at 20 × 106 cells/ml at a perfusion rate of 1 RV/day. Constant cellular environment and metabolism resulted in stable product quality patterns. This study presents a promising strategy for the effective design and development of perfusion cultures for a given expression system and underlines the potential of the ST system as a valuable scale-down tool for perfusion cultures.

Development of a shake tube-based scale-down model for perfusion cultures.

The use of benchtop bioreactors (BRs) for the development of mammalian cell perfusion cultures is expensive and time consuming, given its complexity in equipment and operation. Scale-down models, going from liter to milliliter scale, are needed to support the rapid determination of suitable operating conditions in terms of viable cell density (VCD), perfusion rate, and medium composition. In this study, we compare the performance of steady-state perfusion cultures in orbitally shaken tube and BR systems for a given Chinese hamster ovary cell line. The developed scale-down model relied on a daily workflow designed to keep the VCD constant at specific target values. This includes: cell count, removal of excessive cells (bleeding), spin down of remaining cells, harvest of cell-free supernatant, and resuspension in fresh medium. Steady-state cultures at different VCD values, medium exchange rates and working volumes were evaluated. Shake-tube perfusion cultures allowed the prediction of cell-specific growth, glucose consumption, ammonia, and monoclonal antibody production rates for much larger BRs, but not lactate (LAC) production rates. Although charge variant profiles remained comparable, different glycosylation patterns were obtained. The differences in LAC production and glycosylation probably resulted from the discontinuous medium exchange, the poor carbon dioxide removal, and the deficient pH control. Therefore, if requested by the specific process to be developed, product quality has to be fine-tuned directly in the BR system. Altogether, the developed strategy provides a useful scale-down model for the design and optimization of perfusion cultures with strong savings in time and media consumption.

Improved Performance in Mammalian Cell Perfusion Cultures by Growth Inhibition.

Mammalian cell perfusion cultures represent a promising alternative to the current fed-batch technology for the production of various biopharmaceuticals. Long-term operation at a fixed viable cell density (VCD) requires a viable culture and a constant removal of excessive cells. Product loss in the cell removing bleed stream deteriorates the process yield. In this study, the authors investigate the use of chemical and environmental growth inhibition on culture performance by either adding valeric acid (VA) to the production media or by reducing the culture temperature (33.0 °C) with respect to control conditions (36.5 °C, no VA). Low temperature significantly reduces cellular growth, thus, resulting in lower bleed rates accompanied by a reduced product loss of 11% compared to 26% under control conditions. Additionally, the cell specific productivity of the target protein improves and maintained stable leading to media savings per mass of product. VA shows initially an inhibitory effect on cellular growth. However, cells seemed to adapt to the presence of the inhibitor resulting in a recovery of the cellular growth. Cell cycle and Western blot analyses support the observed results. This work underlines the role of temperature as a key operating variable for the optimization of perfusion cultures.