Simulation and Structural Analysis of a Flexible Coupling Bionic Desorption Mechanism Based on the Engineering Discrete Element Method.

Soil adhesion is one of the important factors affecting the working stability and quality of agricultural machinery. The application of bionic non-smooth surfaces provides a novel idea for soil anti-adhesion. The parameters of sandy loam with 21% moisture content were calibrated by the Engineering Discrete Element Method (EDEM). The final simulated soil repose angle was highly consistent with the measured soil repose angle, and the obtained regression equation of the soil repose angle provides a numerical reference for the parameter calibration of different soils. By simulating the sinusoidal swing of a sandfish, it was found that the contact interface shows the phenomenon of stress concentration and periodic change, which reflects the effectiveness of flexible desorption and soil anti-adhesion. The moving resistance of the wedge with different wedge angles and different serrated structures was simulated. Finally, it was found that a 40° wedge with a high-tail sparse staggered serrated structure on the surface has the best drag reduction effect, and the drag reduction is about 10.73%.

Impact of weakly charged insoluble karaya gum on zein nanoparticle and mechanism for stabilizing Pickering emulsions.

The effect of weakly charged insoluble karaya gum (KG) on zein colloidal nanoparticles (ZKGPs) for stabilizing Pickering emulsions was investigated. Due to weak surface charge, KG could cover the surface of zein particles by hydrogen bonds and weak electrostatic interactions. With the increase in coverage, the zeta potential of ZKGPs changed from positive to negative values close to zero and the average particle size tended to become larger. The closest neutral wettability (89.85°) was achieved when the zein/KG mass ratio was 1:1. The samples prepared with high oil volume fraction (φ = 0.5-0.75) and high particle concentration (1.0-1.3 %, w/v) formed emulsion gels easily and showed higher storage stability. CLSM images also confirmed that ZKGPs could be distributed in the continuous phase to enhance the emulsion network structure. Consequently, weakly charged ZKGPs reduced the emulsification energy barrier and increased the coverage and steric hindrance of particles at the oil/water interface. These findings provide new ideas for the development of stable Pickering emulsions for application in food textural modification as well as encapsulation and delivery of bioactive substances.

Bionic Nonsmooth Drag Reduction Mathematical Model Construction and Subsoiling Verification.

In this study, a bionic nonsmooth drag-reducing surface design method was proposed; a mathematical model was developed to obtain the relationship between the altitude of the nonsmooth drag-reducing surface bulges and the spacing of two bulges, as well as the speed of movement, based on which two subsoiler shovel tips were designed and verified on field experiments. The mechanism of nonsmooth surface drag reduction in soil was analyzed, inspired by the efficient digging patterns of antlions. The nonsmooth surface morphology of the antlion was acquired by scanning electron microscopy, and a movement model of the nonsmooth surface in soil was developed, deriving that the altitude of the nonsmooth drag-reducing surface bulge is proportional to the square of the distance between two bulges and inversely proportional to the square of the movement speed. A flat subsoiler shovel tip and a curved tip were designed by applying this model, and the smooth subsoiler shovel tips and the pangolin scale bionic tips were used as controls, respectively. The effect of the model-designed subsoilers on drag reduction was verified by subsoiling experiments in the field. The results showed that the resistance of the model-designed curved subsoiler was the lowest, the resistance of the pangolin scale bionic subsoiler was moderate, and the resistance of the smooth surface subsoiler was the highest; the resistance of the curved subsoiler was less than the flat subsoilers; the resistance reduction rate of the model-designed curved subsoiler was 24.6% to 33.7% at different depths. The nonsmooth drag reduction model established in this study can be applied not only to the design of subsoilers but also to the design of nonsmooth drag reduction surfaces of other soil contacting parts.

Research on the drag reduction mechanism of antlion (Myrmeleon sagax) larvae nonsmooth structural surface.

Antlion (Myrmeleon sagax) larvae live in sandy soil and possess the ability to enter soil quickly. In this article, the hierarchical structure of the nonsmooth surface of antlion larvae was obtained using a scanning electron microscope (SEM). Based on the results, a bionic nonsmooth structure model was established to investigate the friction and movement of soil particles above it. Then the relationship between drag reduction characteristics and the antlion larvae's nonsmooth structural surface was discussed, which would be helpful to design soil-engaging components. When the height of each nonsmooth structure is proportional to the square of their interval distance, and is proportional to the velocity of movement, it is shown that a nonsmooth structural surface contributes to improving the bulk coefficient of granular materials, which leads to substantial drag reduction.