Long-term exposure to polystyrene microplastics triggers premature testicular aging.

BACKGROUND: Plastic pollution is greatly serious in the ocean and soil. Microplastics (MPs) degraded from plastic has threatened animals and humans health. The accumulation of MPs in the tissues and blood in animals and humans has been found. There is therefore a need to assess the toxicological effects of MPs on the reproductive system. RESULTS: In this study, we explored the effect of polystyrene microplastics (PS-MPs) on premature testicular aging in vitro and in vivo. In vitro, we found that testicular sertoli cells (TM4 cells) was prematurely senescent following PS-MPs treatment by the evaluation of a range of aging marker molecules (such as Sa-ß-gal, p16 and 21). TM4 cells were then employed for in vitro model to study the potential molecular mechanism by which PS-MPs induce the premature senescence of TM4 cells. NF-κB is identified as a key molecule for PS-MPs-induced TM4 cellular senescence. Furthermore, through eliminating reactive oxygen species (ROS), the activation of nuclear factor kappa B (NF-κB) was blocked in PS-MPs-induced senescent TM4 cells, indicating that ROS triggers NF-κB activation. Next, we analyzed the causes of mitochondrial ROS (mtROS) accumulation induced by PS-MPs, and results showed that Ca2+ overload induced the accumulation of mtROS. Further, PS-MPs exposure inhibits mitophagy, leading to the continuous accumulation of senescent cells. In vivo, 8-week-old C57 mice were used as models to assess the effect of PS-MPs on premature testicular aging. The results illustrated that PS-MPs exposure causes premature aging of testicular tissue by testing aging markers. Additionally, PS-MPs led to oxidative stress and inflammatory response in the testicular tissue. CONCLUSION: In short, our experimental results revealed that PS-MPs-caused testicular premature aging is dependent on Ca2+/ROS/NF-κB signaling axis. The current study lays the foundation for further exploration of the effects of microplastics on testicular toxicology.

The effect of heat stress on the epidermal growth factor (EGF)-mediated intracellular signaling, and changes cell behavior on swine testicular cell.

At present, high environmental temperature is the main factor endangering animal production, growth and development. Therefore, the harmful effects of heat stress led by hot environment on livestock have attracted much attention. In this work, the cellar property and signaling property of epidermal growth factor (EGF) below heat stress remains unclear in swine testicular cells. Here, the effect of heat stress on EGF-induced intracellular signaling and cell behavior was explored in the ST (a porcine testis cell line). A series of experiments were done to study the cellular behavior and signaling properties of EGF under heat stress. It can be discovered which high ambient temperature changed the cellular characteristics of EGF/EGFR. The eventuates displayed when cells were exposed to thermal environment, EGF/EGFR basically did not internalize, mainly gathered on the cell membrane. Our group also researched the effect of EGF's signaling properties, and the results showed that the ability of EGF to activate EGFR-mediated intracellular signaling decreased significantly under heat stress. Finally, this study illustrated that EGF's cell behavior and signaling profile are obviously altered, indicating that heat stress seriously affected the biological activity of EGF/EGFR, which establish a solid foundation for studying the effect of the EGF on testicular tissue under heat environment.

Isolation and thermo-acclimation of thermophilic bacteria in hyperthermophilic fermentation system.

Hyperthermophilic microorganisms play a key role in the hyper-thermophilic composting (HTC) technique. However, little information is available about the hyperthermophilic microorganisms prevalent in HTC systems, except for the Calditerricola satsumensis, Calditerricola yamamurae, and Thermaerobacter. To obtain effective hyper-thermophilic microorganisms, a continuous thermo-acclimation of the suitable thermophilic microorganisms was demonstrated in this study. Bacillus thermoamylovorans with high-temperature endurance (70 °C) were newly isolated from sludge composting, and an adequate slow heating rate (2 °C per cycle) was applied to further improve its thermostability. Finally, a strain with a maximum growth temperature of 80 °C was obtained. Moreover, structural and hydrophobic changes in cell proteins, the special amino acid content ratio, and the membrane permeability of the thermophilic bacterium after thermo-acclimation were evaluated for improved thermostability. In addition, the acclimated hyperthermophilic bacterium was further inoculated into the HTC system, and an excellent performance with a maximum operating temperature of 82 °C was observed.

Immobilization and Release Behavior of Phosphorus on Phoslock-Inactivated Sediment under Conditions Simulating the Photic Zone in Eutrophic Shallow Lakes.

Phosphorus-inactivating agents (PIAs) have increasingly been applied and extensively investigated to control internal phosphorus loading in lakes. However, little is known about the behavior of PIA-amended sediment in terms of phosphorus immobilization and release when the sediment is resuspended in the photic layer, whose environment differs from the lake bed. Lanthanum-modified bentonite (LMB) is a popular PIA product. In this study, the 33 day core incubation experiment under dark conditions showed that capping sediment with LMB efficiently decreased the concentration of total phosphorus, total dissolved phosphorus, and dissolved inorganic phosphorus (DIP) by 90, 87, and 99%, respectively. Resuspension into overlying water under light conditions at high pH, high dissolved organic carbon, and in the presence of algae significantly impedes the performance of LMB. However, the adoption of a higher LMB dose improved the performance, including a reduction in the phosphorus level and control of algal growth. The dynamics of the phosphorus migration when the LMB-inactivated sediment was resuspended into the photic zone mainly involves the release of DIP from the sediment and the uptake of DIP by algae and LMB. In conclusion, a higher dose is needed in the PIA (particularly Phoslock) application in shallow productive lakes where sediment resuspension occurs frequently.

Phosphate removal from water by a novel zeolite/lanthanum hydroxide hybrid material prepared from coal fly ash.

This study was undertaken to investigate the effectiveness of the hybrid adsorbent, which was synthesized from coal fly ash and was composed of lanthanum hydroxide and zeolite (La-ZFA), for phosphate removal from water. Long-term repeated adsorption tests for 30 days showed that the maximum removal capacity of the material reached 66.09 mg P/g. The fractionation of adsorbed phosphorus indicated that phosphate immobilized by La-ZFA was quite irreversible and was dominated by HCl-P fraction. It was suggested that the immobilization of phosphate was mainly attributed to lanthanum hydroxide and was slightly influenced by coexistence of other anions (Cl(-), NO3(-), SO4(2-), and HCO3(-)). At a La/P molar ratio between 1.5:1 and 2.0:1, a nearly complete removal (above 98%) of phosphate could be achieved. La-ZFA also exhibited great performance for removing phosphate from lake water (97.29%) as well as the effluent from wastewater treatment plant (97.86%), respectively. In addition, based on the results of the present study, it was believed that La-ZFA could be a potential material for phosphate removal in practical application.

Aflatoxin B1 exposure triggers inflammation and premature skin aging via ERMCS/Ca2+/ROS signaling cascade.

Aflatoxin B1 (AFB1) is a recognized hazard environmental contaminant mainly found in cereal and fruits. The toxicity of AFB1 exposure to various organs has been revealed in some literature. In current study, we explored the effect of AFB1 exposure on premature aging/senescence of skin. In vivo, 8-week-old C57 mice were used as models to evaluate the effect of dietary AFB1 exposure on premature skin aging. The results showed that AFB1 exposure caused premature skin aging by testing aging markers. Additionally, AFB1 led to oxidative stress and inflammatory response. In vitro, AFB1 exposure triggered premature cellular senescence in mouse skin fibroblasts cells (L929 cells) by assessing a range of cellular senescence-related markers. Further, the potential molecular mechanism by which AFB1 induce the premature skin aging was studied. ROS and Ca2+ is proven to be the key molecules in AFB1-induced cellular senescence. Further, through eliminating Ca2+, AFB1-caused oxidative stress and cellular senescence were both attenuated, suggesting that Ca2+ overload in the mitochondria results in cellular senescence by increasing ROS production. Next, we analyzed the causes of Ca2+ overload, and results showed that AFB1 exposure induces Ca2+ overload through increasing the formation of mitoguardin (Miga) and vesicle-associated membrane protein (VAMP)-associated protein (Vap33)-mediated endoplasmic reticulum (ER)-mitochondria contact sites (ERMCS). AFB1 exposure also inhibited mitophagy, leading to accelerate L929 cell senescence. In short, combining in vivo and in vitro results, we demonstrate that exposure to AFB1 causes premature skin aging, which is dependent on ERMCS/Ca2+/ROS/ signaling axis. The current study suggests that prolonged exposure to AFB1 makes skin more vulnerable to damage.

IP3R1 regulates calcium balance in porcine oocyte maturation and early embryonic development.

The dynamic balance of Ca2+ in oocytes promotes the recovery of the meiotic arrest phase, consequently promoting oocyte maturation. Hence, the analysis of the maintenance and role of calcium homeostasis in oocytes has important guiding significance for obtaining high-quality eggs and maintaining the development of preimplantation embryos. Inositol 1,4,5-trisphosphate receptors (IP3Rs) are calcium channel proteins that regulate the dynamic balance between the endoplasmic reticulum (ER) and mitochondrial Ca2+. Nevertheless, the expression and role of IP3R in normal pig oocytes have not been reported, and other studies have focused on the role of IP3R in damaged cells. The purpose of this study was to investigate the potential role of IP3R in regulating calcium homeostasis in oocyte maturation and early embryonic development. Our results showed that IP3R1 is stably expressed at different stages of porcine oocyte meiosis, IP3R1 gradually converges to the cortex, and cortical clusters are formed in MII stages. The loss of IP3R1 activity contributeds to the failure of porcine oocyte maturation and cumulus cell expansion, as well as the obstruction of polar body excretion. Further analysis showed that IP3R1 plays an important role in affecting calcium balance by regulating the IP3R1-GRP75-VDAC1 channel between mitochondria and the endoplasmic reticulum (ER) during porcine oocyte maturation. Inhibiting IP3R1 expression-induced ER dysfunction, contributeding to ER calcium concentration ([Ca2+]ER) release outwards into mitochondria and causing mitochondrial free calcium concentration ([Ca2+]m) overload and mitochondrial oxidative stress, which was confirmed by the increase in the level of reactive oxygen species (ROS) and apoptosis. Thereby, IP3R1 plays an important role in affecting calcium balance by regulating the IP3R1-GRP75 -VDAC1 channel between mitochondria and the ER during porcine oocyte maturation, inhibiting IP3R1 expression-induced calcium overload and mitochondrial oxidative stress, and increasing ROS levels and apoptosis.

Glycine regulates lipid peroxidation promoting porcine oocyte maturation and early embryonic development.

In vitro-cultured oocytes are separated from the follicular micro-environment in vivo and are more vulnerable than in vivo oocytes to changes in the external environment. This vulnerability disrupts the homeostasis of the intracellular environment, affecting oocyte meiotic completion, and subsequent embryonic developmental competence in vitro. Glycine, one of the main components of glutathione (GSH), plays an important role in the protection of porcine oocytes in vitro. However, the protective mechanism of glycine needs to be further clarified. Our results showed that glycine supplementation promoted cumulus cell expansion and oocyte maturation. Detection of oocyte development ability showed that glycine significantly increased the cleavage rate and blastocyst rate during in vitro fertilization (IVF). SMART-seq revealed that this effect was related to glycine-mediated regulation of cell membrane structure and function. Exogenous addition of glycine significantly increased the levels of the anti-oxidant GSH and the expression of anti-oxidant-related genes (glutathione peroxidase 4 [GPX4], catalase [CAT], superoxide dismutase 1 [SOD1], superoxide dismutase 2 [SOD2], and mitochondrial solute carrier family 25, member 39 [SLC25A39]), decreased the lipid peroxidation caused by reactive oxygen species (ROS) and reduced the level of malondialdehyde (MDA) by enhancing the functions of mitochondria, peroxisomes and lipid droplets (LDs) and the levels of lipid metabolism-related factors (peroxisome proliferator activated receptor coactivator 1 alpha [PGC-1α], peroxisome proliferator-activated receptor γ [PPARγ], sterol regulatory element binding factor 1 [SREBF1], autocrine motility factor receptor [AMFR], and ATP). These effects further reduced ferroptosis and maintained the normal structure and function of the cell membrane. Our results suggest that glycine plays an important role in oocyte maturation and later development by regulating ROS-induced lipid metabolism, thereby protecting against biomembrane damage.

Production of high-quality gametes is the premise of livestock reproduction and conservation of germplasm resources, especially high-quality oocytes, as oocyte quality determines the quality of offspring. Due to the limitations in approaches and the number of mature oocytes in vivo, in vitro maturation (IVM) culture has become an important way to obtain mature oocytes. However, IVM-cultured oocytes are separated from the follicular microenvironment in vivo and are, thus, more vulnerable than in vivo oocytes to changes in the external environment. Our study was conducted to determine if exogenous supplementation of glycine, the highest content of amino acids in oviduct fluid and follicular fluid, can improve oocyte maturation efficiency in vitro, and analyze the mechanism of glycine. This study demonstrated that glycine can maintain redox balance and block reactive oxygen species-induced lipid peroxidation, thereby protecting against biomembrane damage and reducing the occurrence of ferroptosis to maintain normal oocyte development function. This study will provide a theoretical basis for preventing and improving oxidative damage during oocyte culture in vitro.

The effect of heat stress on the cellular behavior, intracellular signaling profile of porcine growth hormone (pGH) in swine testicular cells.

At present, heat stress caused by the thermal environment is the main factor that endangers the reproductive function of animals. Growth hormone (GH) is a polypeptide hormone, the biological function of reproductive organs has been reported, and it has many important physiological functions in the body. However, so far, the behavior and signal transduction of GH in testicular cells under heat stress are still unclear. To this end, in the current work, we use a swine testicular cell line (ST) as an in vitro model to explore the cell behavior and intracellular signaling profile of porcine growth hormone (pGH) under heat stress; the results showed that when cells were under heat stress, pGH and GHR were basically not internalized, and a large number of them accumulated on the cell membrane. In addition, we also studied the effect of pGH on the JAK2-STATs signaling pathway and IGF-1 expression under heat stress, we found that the ability of pGH to activate the JAK-STATs signaling pathway and IGF-1 under heat stress was greatly reduced (p < 0.05). In conclusion, our research shows that when cells undergo heat stress, the internalization of pGH and GHR were inhibited, and the activation of the JAK2-STATs signaling pathway and IGF-1 expression were reduced; this lays a solid foundation for further research on the effect of pGH on swine testicular tissue under thermal environment.

Removal of fluoride from water using aluminum hydroxide-loaded zeolite synthesized from coal fly ash.

The removal of fluoride from wastewater is essential as the excess accumulation of fluoride in environment is harmful to the health of humans. In this study, the defluorination of water by aluminum hydroxide-coated zeolite (AHZ), which was synthesized from coal fly ash, was investigated in batches. The Langmuir maximum adsorption capacity of fluoride by AHZ reached 18.12 mg/g. Aluminum hydroxide was shown to be the major component that adsorbed fluoride. More than 92% removal of fluoride was achieved within 2 h, and the fluoride adsorption kinetics were well fitted to a pseudo-second-order model. The point of zero charge (pHpzc) of the AHZ was determined to be 5.52. Fluoride adsorption by AHZ depended greatly on pH, and maximum performance was obtained at pH 5.5-6.5. The AHZ showed good selectivity for the adsorption of fluoride in the presence of chloride, nitrate, sulfate, bicarbonate, and acetate ions, and the fluoride was nearly exhausted at a sufficiently high dose. The release of OH- due to fluoride adsorption was confirmed. FTIR and XPS studies further illustrated that the adsorption mechanism of fluoride adsorption on AHZ was ligand exchange with hydroxyl groups and the formation of F-Al bonds.

Synthesis of graphene oxide/polyethyleneimine sponge and its performance in the sustainable removal of Cu(II) from water.

Modification of graphene oxide (GO) with polyethyleneimine (PEI) has been studied to develop a GO/PEI sponge material that not only performs well in the adsorption of Cu(II) but also is easily separated from water. The results showed that GO had excellent affinity for PEI, and GO/PEI prepared at pH 9.0 using PEI with a MW of 70,000 was shown to be a good adsorbent for Cu(II). This GO/PEI was characterized with SEM, XRD, XPS, FTIR and TG analyses and was investigated for Cu(II) adsorption further. The adsorption isotherm data of Cu(II) were fitted well with the Langmuir model, from which the maximum adsorption of GO/PEI was calculated to be 150.9 mg/g at pH 5.5. This was much higher than that of GO and two commercial resins. GO/PEI showed high selectivity towards Cu(II). In GO/PEI, the contributions of amino groups on PEI and negative charges on GO were 79.2% and 20.8%, respectively. Cu(II) adsorption on GO/PEI decreased with decreasing pH, and 1 M HCl caused nearly complete desorption of the adsorbed Cu(II). Experimental results of five cycles of adsorption-desorption indicated that this material could be reused. Column studies showed that GO/PEI performed well in terms of both Cu(II) adsorption and stability in water.

Performance and mechanism of lanthanum-modified zeolite as a highly efficient adsorbent for fluoride removal from water.

Defluoridation of water is still challenging due to the fluoride pollution of both groundwater and surface water worldwide. In this study, lanthanum-modified zeolite (LMZ) was synthesized from coal fly ash and was investigated for fluoride removal from water by conducting batch and column experiments. Our results indicated that the process of fluoride adsorption was endothermic and the adsorption kinetics on LMZ followed the pseudo-second-order model. A higher temperature increased both the capacity and the rate of adsorption. The maximum fluoride adsorption capacity of LMZ reached 141.5 mg/g with a F/La molar ratio of 4.21, as estimated from the Langmuir model which best fitted the isotherm data. Fluoride adsorption greatly depended on pH, with optimal performance being achieved within ∼5.0-∼7.0. The point of zero charge of LMZ was pH 8.8, at which only bicarbonate ions greatly affected fluoride removal. However, no competing effect was observed at pH 6.3 for all tested anions including chloride, sulphate, nitrate, bicarbonate and acetate. The dominant adsorption mechanism was the ligand exchange of fluoride with hydroxyls on LMZ, as illustrated by the rise in pH due to fluoride adsorption and by the molecular scale spectroscopic FTIR, Raman and XPS studies. Fluoride adsorbed on LMZ was successfully desorbed using NaOH solution, and regenerated LMZ could be reused. The results of column studies showed that LMZ granulated with alginate performed well in treating F--containing water. In conclusion, LMZ is a promising material for efficient defluoridation from water.

The Cellular Behavior, Intracellular Signaling Profile and Nuclear-Targeted Potential Functions of Porcine Growth Hormone (pGH) in Swine Testicular Cells.

Porcine growth hormone (pGH) has many important biological functions and roles, and the biological activity of pGH is closely related with its cell behavior and characteristics. However, so far, the behavior of pGH in swine testicular cell remains unclear. For this, in the current work, the swine testicular cell line (ST) was used as an in vitro model, and CLSM (Confocal laser scanning microscope), IFA (Indirect immunofluorescence assay), FCM (Flow cytometry) and WB (Western-blotting) were used to explore the pGH's cell behivior and function, and the results showed that pGH and GHR could internalize into ST cell and transported to the nucleus. Furthermore, we studied the internalization kinetics of pGH and GHR on ST cell, and found that pGH and GHR internalizes into ST cell in a time-dependent manner. More importantly, we also investigated the potential molecular functions of pGH-GHR after it entered into the cell nuclei. The results indicated that nuclear-localized GHR could participate in cell proliferation by regulating the signal intensity of STAT5. In summary, our current research shows that the nuclear-localized pGH-GHR participates in the cell proliferation of ST cell, which lays a solid foundation for further research on the regulatory effect of pGH on testicular tissue.

The effect of growth hormone-induced cellular behavior and signaling properties on induced cellular senescence in human mesenchymal stem cells.

Senescence is associated with a decline in physiological function, which is accompanied by onset of diseases. Growth hormone (GH) is a class of growth-promoting cytokines with reduced secretion in aging populations. However, the effect of senescence on GH bioactivity is not fully understood in human mesenchymal stem cells (hMSCs). In this work, GH-induced cellular behavior and intracellular signaling transduction were explored in senescent hMSCs. Therefore, hMSCs were used to establish a senescence model by H2O2 treatment for this study. First, we investigated the effects of cellular senescence on the cell behavior of GH. The experimental results suggested that GH could not be internalized into the nucleus, and a significant reduction in GH internalization into the cytoplasm was observed in senescent hMSCs compared to the control group. Second, the effect of cellular senescence on GH-mediated intracellular signaling pathways was investigated by Western blotting. For this, the signaling molecule activation of Janus kinase 2 (JAK2)/signal transducer and activator transcription (STAT) stimulated by GH was detected. Our data indicated that the signaling intensity of p-JAK2, p-STAT5, p-STAT3 and p-STAT1 was considerably weakened. Taken together, these findings provide important insights into the impaired effects of cellular senescence on the biological activity of GH.

Effect of algae on phosphorus immobilization by lanthanum-modified zeolite.

Phosphorus-inactivating agents (PIAs) as geoengineering tools in lakes have been investigated extensively, but PIA resuspension in the photic layer occurs frequently in shallow lakes and little is known about the influence of algae on PIA performance. Our results proved that algae increased the dissolved oxygen, pH and dissolved organic carbon concentration substantially. In the absence of sediment, lanthanum modified zeolite (LMZ) as a representative PIA and algae could deplete dissolved inorganic phosphorus (DIP) from water but the former was faster than the latter. When LMZ and algae coexisted, the amount of phosphorus that was captured by LMZ was 3.1 times greater than that taken up by algae. An increase in pH or dissolved organic carbon increased the zero-equilibrium phosphorus concentration (EPC0) of the sediment but LMZ addition could lower the EPC0 and reduce the risk of phosphorus release during the algal blooming season. In the presence of sediment, LMZ reduced the DIP concentration more rapidly and yielded a lower final DIP concentration compared with algae. In conclusion, the influence of algae on the performance of LMZ by (i) taking up DIP to reduce the availability of DIP and convert DIP into a releasable phosphorus form and (ii) increasing the pH and dissolved organic carbon concentration to hinder the adsorption ability of DIP were recognized. The LMZ performed well, even in the presence of algae.

Coupled influence of pH and dissolved organic carbon on the immobilization of phosphorus by lanthanum-modified zeolite.

Wind-driven waves and currents in shallow lakes frequently trigger the resuspension of sediments in the photic layer, which is characterized with a high pH and high dissolved organic carbon (DOC) concentration. The mechanism of phosphorus-inactivating agents (PIAs) immobilizing phosphorus under the coupled influence of pH and DOC is not clarified, and the applicability of PIAs in eutrophic shallow lakes is thus still doubtful. We found that, under the coupled influence of pH and DOC, the uptake of phosphate by LMZ was affected mainly by pH at low DOC concentrations and by DOC at high DOC concentrations. A high pH (9.3) and high DOC concentration (24.7 mg/L) greatly increased the release of phosphorus from sediment to water. However, the addition of LMZ substantially reduced the P concentrations in water, mainly via capture of dissolved inorganic phosphorus. The results of the reversibility of the adsorption of phosphates and DOC showed that phosphate had much higher affinity than DOC towards LMZ. The phosphate once adsorbed on LMZ was resistant to release when exposed to conditions of either a high pH (9.5), high DOC concentration (250 mg/L) or both; i.e., only <5% of the adsorbed phosphate is releasable. Therefore, we proposed that, to avoid the coupled influence of pH and DOC in the photic layer of eutrophic shallow lakes, LMZ could be applied in multiple low doses in the season when the growth of algae is minimal (a low pH and low DOC concentration).

Synthesis of 3D graphene-based materials and their applications for removing dyes and heavy metals.

Contamination of water streams by dyes and heavy metals has become a major problem due to their persistence, accumulation, and toxicity. Therefore, it is essential to eliminate and/or reduce these contaminants before discharge into the natural environment. In recent years, 3D graphene has drawn intense research interests owing to its large surface area, superior charge conductivity, and thermal conductivity properties. Due to their unique surface and structural properties, 3D graphene-based materials (3D GBMs) are regarded as ideal adsorbents for decontamination and show great potential in wastewater or exhaust gas treatment. Here, this minireview summarizes the recent progress on 3D GBMs synthesis and their applications for adsorbing dyes and heavy metals from wastewater based on the structures and properties of 3D GBMs, which provides valuable insights into 3D GBMs' application in the environmental field.

Optimisation of enzymatic saccharification of wheat straw pre-treated with sodium hydroxide.

To enhance the reducing sugar yield in enzymatic hydrolysis, various factors (NaOH concentration, solid content and pre-treatment time) that affect the pre-treatment process were investigated and evaluated based on the reducing sugar yield of the subsequent enzymatic hydrolysis. The enzymatic hydrolysis was based on the cellulase from Trichoderma reesi ATCC 26921, the optimum NaOH pre-treatment conditions were an NaOH concentration of 1.0% (w/w), a solid content of 5.0% (w/v) and a pre-treatment time of 60 min. Various parameters that affect the enzymatic hydrolysis of wheat straw, including the solid content, enzyme loading, pH and hydrolysis time, were investigated and optimized through a Box-Behnken design and response surface methodology. The predicted optimum conditions for enzymatic hydrolysis were a solid content of 8.0% (w/v), an enzyme loading of 35 FPU/g substrate, a temperature of 50 °C, a pH of 5.3 and a hydrolysis time of 96 h. The experimental result showed that the maximum reducing sugar yield was 60.73% (53.35% higher than the wheat straw without NaOH pre-treatment), which is in accordance with the predicted conditions.

Competitive adsorption of phosphate and dissolved organic carbon on lanthanum modified zeolite.

Lanthanum (hydr)oxide-based materials are attractive as highly efficient adsorbents for phosphate removal from both sewage and lake environment. However, dissolved organic carbon (DOC) coexists in the waters and exact information is still lacking on how DOC influence the phosphate adsorption process. In this study, competitive adsorption of phosphate and DOC on lanthanum modified zeolite (LMZ) was investigated using humic acid as the representative. In LMZ, lanthanum hydroxide was shown to be the active ingredient accounting for >98% of the binding sites of both phosphate and DOC. Without competition, the maximum adsorption capacity of phosphate and DOC estimated from the Langmuir isotherm model was 52.25 and 41.32 mg/g, respectively. When coexisted, DOC did not affect the adsorption of phosphate while phosphate reduced the adsorption of DOC by ~40%. In addition, preloading LMZ with DOC had little effect on phosphate adsorption while coating with phosphate substantially lowered DOC adsorption. Furthermore, phosphate can release most of the adsorbed DOC (>60%), while DOC can not replace adsorbed phosphate (<2%). The adsorption kinetics of both phosphate and DOC was best described by the psudo-second-order model (r2 > 0.999). The adsorption of both phosphate and DOC increased with decreasing pH or increasing ionic strength. We proposed that phosphate was competitive than DOC for the ligand exchange sites of singly-coordinated hydroxyls, but DOC can be solely adsorbed onto the uncharged hydroxyls via hydrogen bonding.

Monolayers of an organosilane on magnetite nanoparticles for the fast removal of Cr(VI) from water.

Monolayers of N-(2-aminoethyl)-3-aminopropyltrimethoxysilane have been established on magnetite nanoparticles to develop a novel magnetic adsorbent for fast decontamination of hexavalent chromium (Cr(VI)) from water. Results indicated that monolayer adsorption of the silane from water took place at low concentrations (<300 mg/L) and around 100% surface coverage was obtained at temperatures ≥90°C. The hydrolysed silane was anchored to the magnetite surface through condensation reactions between its silanol groups and the surface hydroxyl groups of magnetite. The functional amine groups were protonated by acid treatment for adsorbing Cr(VI). The monolayer of the silane on magnetite (MSM) with approximately 100% surface coverage showed extremely rapid adsorption kinetics for Cr(VI), such that the process was complete within 1 min. This enables the treatment of large amounts of sewage per unit time. The adsorption capacity for Cr(VI) was 8.0 mg/g, as estimated from the Langmuir isotherm model. The saturation magnetization of the MSM reached 64.16 emu/g, allowing easy magnetic recovery from water. In the presence of up to 50-fold molar excesses of chloride and nitrate anions, little effect on Cr(VI) removal was seen, but moderate and large impacts were observed with sulphate and hydroxyl anions, respectively. Desorption of adsorbed Cr(VI) and regeneration of the MSM were successfully achieved by NaOH and HCl treatments to deprotonate and protonate the amine groups, respectively. By selecting a silane with suitable functional groups, the surface properties may be tailored for a particular pollutant.