RESUMEN
Composite polymeric and ionic liquid (IL) electrolytes are some of the most promising electrolyte systems for safer battery technology. Although much effort has been directed towards enhancing the transport properties of polymer electrolytes (PEs) through nanoscopic modification by incorporating nano-fillers, it is still difficult to construct ideal ion conducting networks. Here, a novel class of three-dimensional self-assembled polymeric ionic liquid (PIL)-functionalized cellulose nano-crystals (CNC) confining ILs in surface-grafted PIL polymer chains, able to form colloidal crystal polymer electrolytes (CCPE), is reported. The high-strength CNC nano-fibers, decorated with PIL polymer chains, can spontaneously form three-dimensional interpenetrating nano-network scaffolds capable of supporting electrolytes with continuously connected ion conducting networks with IL being concentrated in conducting domains. These new CCPE have exceptional ionic conductivities, low activation energies (close to bulk IL electrolyte with dissolved Li salt), high Li+ transport numbers, low interface resistances and improved interface compatibilities. Furthermore, the CCPE displays good electrochemical properties and a good battery performance. This approach offers a route to leak-free, non-flammable and high ionic conductivity solid-state PE in energy conversion devices.
RESUMEN
In May 2012, 11 echinococcosis-endemic counties in Ganzi Tibetan Autonomous Prefecture of Sichuan were chosen, and two primary schools were randomly selected in each county from urban and non-urban area. Serum anti-echinococcus IgG was detected by ELISA. Among 5 171 sampled children, the sero-positive rate was 0.8% (43/5 171). The rate in males and females was 0.7% (17/2 538) and 1.0% (26/2 633), respectively (chi2 = 1.581, P > 0.05). The sero-positive rate in urban schools and non-urban schools was 0.7% (14/2 078) and 0.9% (29/3 093), respectively (chi2 = 1.050, P > 0.05). The positive rate in the minorities (1.0%, 41/4273) was higher than that of the Han nationality (0.2%, 2/898)(chi2 = 4.884, P < 0.05). Compared with 2010, 2011, the total positive rate of children in 2012 declined significantly (chi2 = 112.945, P < 0.01).
Asunto(s)
Equinococosis/epidemiología , Animales , Anticuerpos Antiidiotipos , Niño , Echinococcus , Ensayo de Inmunoadsorción Enzimática , Femenino , Humanos , Masculino , Grupos Minoritarios , Instituciones Académicas , Tibet/epidemiologíaRESUMEN
Water-soluble poly(sodium 4-styrenesulfonate) modified graphene (PSSS-GR) was successfully synthesized via covalently grafting poly(sodium 4-styrenesulfonate) (PSSS) on the surfaces of graphene (GR) nanosheets. The structure of PSSS-GR was investigated with Fourier transform infrared, x-ray photoelectron and Raman spectroscopy, thermogravimetric analysis, transmission and scanning electron microscopy and atomic force microscopy. The PSSS chains made the GR nanosheets fully exfoliate into a single-layer structure, and the PSSS layer on GR reached 90 wt%. PSSS chains displayed mutually repulsive effects on promoting GR sheets that were more stable in water. The performances of supercapacitors made of PSSS-GR and unmodified GR electrodes were compared using cyclic voltammetry and galvanostatic charge/discharge techniques. The results showed that PSSS is an effective binder for graphene sheets and can increase the specific capacitance of PSSS-GR based supercapacitors and improve their rate capability. The maximum specific capacitance of the PSSS-GR based supercapacitor was 210 F g(-1) at 5 A g(-1), which was 166% higher than for one made of unmodified graphene electrodes. Electrochemical impedance spectroscopy demonstrated fast ion diffusion in the PSSS-GR electrode structure. PSSS-GR based supercapacitors can fulfil one of the essential requirements for potential electric energy storage applications.
RESUMEN
Covalent attachment of 2,2'-(ethylenedioxy)-diethylamine to multiwalled carbon nanotubes (MWCNTs) produced amino-functionalized MWCNTs which behaved like liquids at ambient temperature. These liquid-like MWCNTs (l-MWCNTs) could be homogeneously dispersed and chemically embedded in an epoxy matrix by solvent-free processing. In contrast, solid MWCNTs (s-MWCNTs) functionalized by 1,8-diaminooctane were poorly dispersed in epoxy although they possess chemical structures and functionalization comparable to l-MWCNTs. An epoxy composite filled with pristine MWCNTs (p-MWCNTs) was also fabricated in the absence of a solvent at the same loading for comparison. The molecular level coupling of l-MWCNTs and epoxy provided significant improvements in overall mechanical properties relative to those composites containing p-MWCNTs and s-MWCNTs. The Young's modulus, storage modulus, tensile strength, failure strain and toughness of neat epoxy were increased by 28.4, 23.8, 22.9, 24.1 and 66.1%, respectively, by adding 0.5 wt% of l-MWCNTs. Thus, functionalized carbon nanotubes in liquid form contributed to better dispersion and superior interfacial bonding with the epoxy matrix, thereby facilitating greater mechanical reinforcement efficiency.
RESUMEN
Using the versatility of silica chemistry, we describe herein a simple and controllable approach to synthesise two-dimensional (2D) silica-based nanomaterials: the diversity and utility of the resulting structures offer excellent platforms for many potential applications.
RESUMEN
Polymer-functionalized reduced graphene oxide (polymer-FG), produced as individually dispersed graphene sheets, offers new possibilities for the production of nanomaterials that are useful for a broad range of potential applications. Although non-covalent functionalization has produced graphene with good dispersibility and a relatively complete conjugated network, there are few reports related to the effective functionalization of reduced graphene oxide (RGO) using a simple, general method. Herein, we report a facile and effective approach for the preparation of polymer-FG from a non-covalently functionalized pyrene-terminal polymer in benzoyl alcohol (BnOH). This aromatic alcohol (BnOH) was used as the liquid medium for the dispersion of graphene oxide (GO) with a pyrene-terminal polymer, and as an effective reductant; this makes the synthesis procedure convenient and the production of polymer-FG easily scalable because the conversion of GO to RGO and the non-covalent functionalization proceed simultaneously. The resulting polymer-FG sheets show organo-dispersibility, high electrical conductivity and good processability, and have a similar grafting density comparable to covalently made materials, thus making them promising candidates for applications such as electrochemical devices, nanomaterials and polymer nanocomposites. Hence, this work provides a general methodology for preparing individually dispersed graphene sheets with desirable properties.
RESUMEN
Ampelopsin (AMP), a plant flavonoid, has been reported to inhibit cell growth and/or induce apoptosis in various types of tumor. The aim of the present study was to assess the apoptosis-inducing activity of AMP in A549 human lung adenocarcinoma epithelial cells and the associated underlying mechanism. A549 cells were incubated with different concentrations of AMP in culture medium. Cell growth and apoptosis were evaluated by MTT assay and Annexin V/propidium iodide double staining and flow cytometry, respectively. In addition, western blotting and reverse transcription quantitative polymerase chain reaction analysis were used to examine the time-dependent changes in protein expression. Certain changes in apoptotic protein expression were detected following exposure to AMP, including X-linked inhibitor of apoptosis protein release, reduced B-cell lymphoma 2, myeloid cell leukemia 1 and survivin expression levels, increased Bcl-2-associated X protein expression levels and cleaved-poly ADP ribose polymerase expression. The results revealed that AMP was a potent inhibitor of A549 cell proliferation. The c-Myc/S-phase kinase-associated protein 2 (Skp2) and histone deacetylase (HDAC)1/2 pathways were found to exert an important role in AMP-induced A549 cell apoptosis, as increased levels of c-Myc mRNA and reduced levels of c-Myc/Skp2 and HDAC1 and 2 proteins following AMP treatment were observed. The levels of F-box and WD repeat-containing protein 7α (Fbw7α), Fbw7ß, Fbw7γ, phosphorylated-(p-)c-Myc (Thr58) and glycogen synthase kinase 3ß (GSK3ß) proteins involved in c-Myc ubiquitin-dependent degradation were also analyzed. Following exposure to AMP, the expression levels of Fbw7α, Fbw7γ and GSK3ß were reduced and p-c-Myc (Thr58) expression levels were increased. The results suggest that AMP exerts an anticancer effect, which is associated with the degradation of c-Myc, Skp2 and HDAC1 and 2. The ability of AMP to induce apoptosis independently of Fbwα and Fbw7γ suggests a possible use in drug-resistant cancer associated with Fbw7 deficiency. Understanding the exact underlying mechanism requires further investigation of the association between c-Myc and Fbw7α/γ reversal, and analysis of whether Thr58 phosphorylation of c-Myc is dependent on GSK3ß.
Asunto(s)
Adenocarcinoma/metabolismo , Apoptosis/efectos de los fármacos , Proteínas de Ciclo Celular/metabolismo , Proteínas F-Box/metabolismo , Flavonoides/farmacología , Histona Desacetilasa 2/metabolismo , Neoplasias Pulmonares/metabolismo , Proteínas Proto-Oncogénicas c-myc/metabolismo , Proteínas Quinasas Asociadas a Fase-S/metabolismo , Transducción de Señal/efectos de los fármacos , Ubiquitina-Proteína Ligasas/metabolismo , Adenocarcinoma/genética , Adenocarcinoma/patología , Adenocarcinoma del Pulmón , Adenosina Monofosfato/metabolismo , Adenosina Monofosfato/farmacología , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Proteína 7 que Contiene Repeticiones F-Box-WD , Regulación Neoplásica de la Expresión Génica , Histona Desacetilasa 2/genética , Humanos , Neoplasias Pulmonares/genética , Neoplasias Pulmonares/patología , Potencial de la Membrana Mitocondrial/efectos de los fármacos , Proteínas Proto-Oncogénicas c-myc/genética , ARN Mensajero/genética , ARN Mensajero/metabolismo , Proteínas Quinasas Asociadas a Fase-S/genéticaRESUMEN
The drug-loaded alginate/poly-L-arginine/chitosan ternary complex microcapsules were prepared by mixing method, absorption method and the combined method of mixing and absorption, respectively. The effect of drug-loading methods on drug load, the encapsulation efficiency and the release properties of the complex microcapsules were investigated. The results showed that the absorption process is a dominating factor to greatly increase the drug load of Hb into microcapsules. Upon loading Hb into microcapsules by combined method of mixing and absorption, the drug load (19.9%) is up to the maximum value, and the encapsulation efficiency is 93.8%. Moreover, the drug release is a zero-order kinetics process for the ternary complex microcapsules made by mixing. For the complex microcapsules made by absorption, the drug release is a first-order kinetics. However, for the complex microcapsules made by combining the mixing and the absorption, the drug release obeys a first-order kinetics during the first eighteen hours, changing afterwards to a zero-order kinetics process. Effect of drug-loading methods on drug load and encapsulation efficiency of alginate/poly-L-arginine/chitosan ternary complex microcapsules.
Asunto(s)
Cápsulas , Preparaciones de Acción Retardada , Portadores de Fármacos , Sistemas de Liberación de Medicamentos/métodos , Alginatos/química , Animales , Arginina/química , Cápsulas/administración & dosificación , Cápsulas/síntesis química , Cápsulas/química , Bovinos , Quitosano/química , Preparaciones de Acción Retardada/administración & dosificación , Preparaciones de Acción Retardada/síntesis química , Preparaciones de Acción Retardada/química , Portadores de Fármacos/síntesis química , Portadores de Fármacos/química , Ácido Glucurónico/química , Hemoglobinas/química , Ácidos Hexurónicos/químicaRESUMEN
Wogonin is a plant monoflavonoid which has been reported to inhibit cell growth and/or induce apoptosis in various tumors. The present study examined the apoptosis-inducing activity and underlying mechanism of action of wogonin in A549 cells. The results showed that wogonin was a potent inhibitor of the viability of A549 cells. Apoptotic protein changes detected after exposure to wogonin included decreased XIAP and Mcl-1 expression, increased cleaved-PARP expression and increased release of AIF and cytochrome C. Western blot analysis showed that the activity of c-Myc/Skp2 and HDAC1/HDAC2 pathways, which play important roles in tumor progress, was decreased. Quantitative PCR identified increased levels of c-Myc mRNA and decreased levels of its protein. Protein levels of Fbw7α, GSK3ß and Thr58-Myc, which are involved in c-Myc ubiquitin-dependent degradation, were also analyzed. After exposure to wogonin, Fbw7α and GSK3ß expression decreased and Thr58-Myc expression increased. However, MG132 was unable to prevent c-Myc degradation. The present results suggest that wogonin has multiple anti-cancer effects associated with degradation of c-Myc, SKP2, HDAC1 and HDAC2. Its ability to induce apoptosis independently of Fbw7α suggests a possible use in drug-resistance cancer related to Fbw7 deficiency. Further studies are needed to determine which pathways are related to c-Myc and Fbw7α reversal and whether Thr58 phosphorylation of c-Myc is dependent on GSK3ß.
Asunto(s)
Adenocarcinoma/metabolismo , Apoptosis/efectos de los fármacos , Proteínas de Ciclo Celular/metabolismo , Proteínas F-Box/metabolismo , Flavanonas/farmacología , Histona Desacetilasa 1/metabolismo , Histona Desacetilasa 2/metabolismo , Neoplasias Pulmonares/metabolismo , Proteínas Proto-Oncogénicas c-myc/metabolismo , Proteínas Quinasas Asociadas a Fase-S/metabolismo , Transducción de Señal/efectos de los fármacos , Ubiquitina-Proteína Ligasas/metabolismo , Adenocarcinoma/genética , Adenocarcinoma del Pulmón , Ciclo Celular/efectos de los fármacos , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Proteína 7 que Contiene Repeticiones F-Box-WD , Regulación Neoplásica de la Expresión Génica/efectos de los fármacos , Glucógeno Sintasa Quinasa 3/metabolismo , Glucógeno Sintasa Quinasa 3 beta , Histona Desacetilasa 1/genética , Histona Desacetilasa 2/genética , Humanos , Neoplasias Pulmonares/genética , Potencial de la Membrana Mitocondrial , Proteínas Proto-Oncogénicas c-myc/genética , ARN Mensajero/genética , ARN Mensajero/metabolismoRESUMEN
Colloidal silica particles were synthesized by the sol-gel process and then modified with 3-methacryloxypropyltrimethoxysilane (γ-MPS) to induce vinyl groups on the surface of the silica particles. By means of in situ emulsion copolymerization of methyl methacrylate (MMA) and butyl acrylate (BA), a series of core-shell silica hybrid particles with nanometre poly(MMA-co-BA) shells were fabricated, which were subsequently compounded with isotactic polypropylene (PP) in the molten state. Upon increasing the feed silicaâ:âmonomer ratio from 1â:â1 to 4â:â1, the poly(MMA-co-BA) shell thickness on the silica core decreased from 50 nm to 10 nm. Owing to the existence of the nanometre poly(MMA-co-BA) shells, the silica hybrid particles were monodispersed in the PP matrix, causing homogeneous debonding at the PP/silica interface, followed by plastic void expansion and matrix shear yielding during impact fracture. These deformation mechanisms greatly toughened the PP-silica composites. A critical shell thickness of poly(MMA-co-BA) was needed to achieve optimal mechanical properties. That is, when the polymer shell thickness was 15 nm, compared to pure PP, the impact toughness of the PP-silica composite was more than doubled with little degradation of tensile strength.
Asunto(s)
Nanotecnología/métodos , Polipropilenos/química , Dióxido de Silicio/química , Cristalización , Ensayo de Materiales , Microscopía Electrónica de Rastreo/métodos , Modelos Químicos , Nanoestructuras/química , Transición de Fase , Polímeros/química , Silicio/química , Espectrofotometría/métodos , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Temperatura , Resistencia a la TracciónRESUMEN
High impact polystyrene (HIPS)/hydroxyapatite (HA) composites are potential biomaterials for bone replacements due to their good biocompatibility and adequate mechanical properties. At the present work, the surface of the micron-sized hydroxyapatite (HA) particles was modified by in situ polymerization of styrene (St), then compounded with HIPS. The effect of the modification of HA surface on morphology and mechanical properties of HIPS/HA composites were investigated. The results showed that the HA particles does not inhibit the polymerization of St. The PS segments coated on the HA surface by in situ polymerization of St enhances the compatibility between HA and HIPS, improves the dispersion of HA particles in HIPS matrix, and enhances the interfacial adhesion between HA and matrix. Thereby, the stiffness, tensile strength and notch impact strength of HIPS/HA composites are improved at the same time. And there is a critical coating thickness of PS on the HA surface for the optimum mechanical properties of HIPS/HA composites.