RESUMEN
We report the design and fabrication of a polarization-maintaining fiber for applications in fiber-assisted THz communications. The fiber features a subwavelength square core suspended in the middle of a hexagonal over-cladding tube by four bridges. The fiber is designed to have low transmission losses, high birefringence, high flexibility, and near-zero dispersion at the carrier frequency of 128â GHz. An infinity 3D printing technique is used to continuously fabricate a 5â m-long polypropylene fiber of â¼6.8 mm diameter. The fiber transmission losses are furthermore reduced by as high as â¼4.4â dB/m via post-fabrication annealing. Cutback measurements using 3â m-long annealed fibers show â¼6.5-11â dB/m and â¼6.9-13.5â dB/m losses (by power) over a 110-150â GHz window for the two orthogonally polarized modes. Signal transmission with bit error rates of â¼10-11-10-5 is achieved at 128â GHz for 1-6 Gbps data rates using a 1.6â m-long fiber link. The average polarization crosstalk values of â¼14.5â dB and â¼12.7â dB are demonstrated for the two orthogonal polarizations in fiber lengths of 1.6-2 m, which confirms the polarization-maintaining property of the fiber at â¼1-2 meter lengths. Finally, THz imaging of the fiber near-field is performed and shows strong modal confinement of the two orthogonal modes in the suspended-core region well inside of the hexagonal over-cladding. We believe that this work shows a strong potential of the infinity 3D printing technique augmented with post-fabrication annealing to continuously produce high-performance fibers of complex geometries for demanding THz communications applications.
RESUMEN
The development of low-cost sensing devices with high compactness, flexibility, and robustness is of significance for practical applications of optical gas sensing. In this work, we propose a waveguide-based resonant gas sensor operating in the terahertz frequency band. It features micro-encapsulated two-wire plasmonic waveguides and a phase-shifted waveguide Bragg grating (WBG). The modular semi-sealed structure ensures the controllable and efficient interaction between terahertz radiation and gaseous analytes of small quantities. WBG built by superimposing periodical features on one wire shows high reflection and a low transmission coefficient within the grating stopband. Phase-shifted grating is developed by inserting a Fabry-Perot cavity in the form of a straight waveguide section inside the uniform gratings. Its spectral response is optimized for sensing by tailoring the cavity length and the number of grating periods. Gas sensor operating around 140 GHz, featuring a sensitivity of 144 GHz/RIU to the variation in the gas refractive index, with resolution of 7 × 10-5 RIU, is developed. In proof-of-concept experiments, gas sensing was demonstrated by monitoring the real-time spectral response of the phase-shifted grating to glycerol vapor flowing through its sealed cavity. We believe that the phase-shifted grating-based terahertz resonant gas sensor can open new opportunities in the monitoring of gaseous analytes.
RESUMEN
The rampant dendrites and hydrogen evolution reaction (HER) resulting from the turbulent interfacial evolution at the anode/electrolyte are the main culprits of short lifespan and low Coulombic efficiency of Zn metal batteries. In this work, a versatile protective coating with excellent zincophilic and amphoteric features is constructed on the surface of Zn metal (ZP@Zn) as dendrite-free anodes. This kind of protective coating possesses the advantages of reversible proton storage and rapid desolvation kinetics, thereby mitigating the HER and facilitating homogeneous nucleation concomitantly. Furthermore, the space charge polarization effect promotes charge redistribution to achieve uniform Zn deposition. Accordingly, the ZP@Zn symmetric cell manifests excellent reversibility at an ultrahigh cumulative plating capacity of 4700â mAh cm-2 and stable cycling at 80 % depth of discharge (DOD). The ZP@Zn//V6 O13 pouch cell also reveals superior cycling stability with a high capacity of 326.6â mAh g-1 .
RESUMEN
The distribution of dopant atoms plays a key role in the effectiveness of doping, thereby requiring delicate characterizations. In this study, we found that energy-dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS) techniques in scanning transmission electron microscopy (STEM) were not adequate to reveal the distribution of yttrium and the chemical composition of the ZrO2/SiO2 heterophase interface in an yttrium-doped ZrO2-SiO2 nanocrystalline glass-ceramic. Atom probe tomography (APT) is rarely utilized to characterize ceramics due to some inherent difficulties. However, we successfully revealed the three-dimensional distribution of ZrO2 nanocrystallites and SiO2 matrix at the atomic scale with APT under optimized and well-controlled conditions. We also found that the ZrO2 nanocrystallites had a special core-shell structure, with a thin Zr/Si interfacial layer as a shell and a ZrO2 solid solution as a core. Yttrium dopants showed interfacial segregation at both ZrO2 grain boundaries and the ZrO2/SiO2 heterophase interfaces.
RESUMEN
Because of its geometric nature, holonomic quantum computation is fault tolerant against certain types of control errors. Although proposed more than a decade ago, the experimental realization of holonomic quantum computation is still an open challenge. In this Letter, we report the first experimental demonstration of nonadiabatic holonomic quantum computation in a liquid NMR quantum information processor. Two noncommuting one-qubit holonomic gates, rotations about x and z axes, and the two-qubit holonomic CNOT gate are realized by evolving the work qubits and an ancillary qubit nonadiabatically. The successful realizations of these universal elementary gates in nonadiabatic holonomic quantum computation demonstrates the experimental feasibility of this quantum computing paradigm.
RESUMEN
Na-superionic-conductor (NASICON)-type cathodes (e.g., Na3 V2 (PO4 )3 ) have attracted extensive attention due to their open and robust framework, fast Na+ mobility, and superior thermal stability. To commercialize sodium-ion batteries (SIBs), higher energy density and lower cost requirements are urgently needed for NASICON-type cathodes. Herein, Na3.5 V1.5 Fe0.5 (PO4 )3 (NVFP) is designed by an Fe-substitution strategy, which not only reduces the exorbitant cost of vanadium, but also realizes high-voltage multielectron reactions. The NVFP cathode can deliver extraordinary capacity (148.2 mAh g-1 ), and decent cycling durability up to 84% after 10 000 cycles at 100 C. In situ X-ray diffraction and ex situ X-ray photoelectron spectroscopy characterizations reveal reversible structural evolution and redox processes (Fe2+ /Fe3+ , V3+ /V4+ , and V4+ /V5+ ) during electrochemical reactions. The low ionic-migration energy barrier and ideal Na+ -diffusion kinetics are elucidated by density functional theory calculations. Combined with electron paramagnetic resonance spectroscopy, Fe with unpaired electrons in the 3d orbital is inseparable from the higher-valence redox activation. More competitively, coupling with a hard carbon (HC) anode, HC//NVFP full cells demonstrate high-rate capability and long-duration cycling lifespan (3000 stable cycles at 50 C), along with material-level energy density up to 304 Wh kg-1 . The present work can provide new perspectives to accelerate the commercialization of SIBs.
RESUMEN
In this work, a novel infinity 3D printing technique is explored to fabricate continuous few-meter-long low-loss near-zero dispersion suspended-core polypropylene fibers for application in terahertz (THz) communications. Particular attention is paid to process parameter optimization for 3D printing with low-loss polypropylene plastic. Three microstructured THz fibers were 3D printed using the standard and infinity 3D printers, and an in-depth theoretical and experimental comparison between the fibers was carried out. Transmission losses (by power) of 4.79 dB/m, 17.34 dB/m, and 11.13 dB/m are experimentally demonstrated for the three fibers operating at 128 GHz. Signal transmission with bit error rate (BER) far below the forward error correction limit (10-3) for the corresponding three fiber types of lengths of 2 m, 0.75 m, and 1.6 m are observed, and an error-free transmission is realized at the bit rates up to 5.2 Gbps. THz imaging of the fiber near-field is used to visualize modal distributions and study optimal fiber excitation conditions. The ability to shield the fundamental mode from the environment, mechanical robustness, and ease of handling of thus developed effectively single-mode high optical performance fibers make them excellent candidates for upcoming fiber-assisted THz communications. Additionally, novel fused deposition modeling (FDM)-based infinity printing technique allows continuous fabrication of unlimited in length fibers of complex transverse geometries using advanced thermoplastic composites, which, in our opinion, is poised to become a key fabrication technique for advanced terahertz fiber manufacturing.
RESUMEN
Terahertz (THz) band is considered to be the next frontier in wireless communications. The emerging THz multiplexing techniques are expected to dramatically increase the information capacity of THz communications far beyond a single channel limit. In this work, we explore the THz frequency-division multiplexing modality enabled by an add-drop multiplexer (ADM) design. Based on modular two-wire plasmonic waveguides fabricated using additive manufacturing and metallization techniques, we demonstrate four-port THz ADMs containing grating-loaded side couplers for operation at ~140 GHz carrier frequency. Particular attention is paid to the design of plasmonic waveguide Bragg gratings and directional couplers capable of splitting broadband THz light into spectral and spatial domains. Finally, we demonstrate multi/demultiplexing of THz signals with bit rates up to 6 Gbps using the developed ADMs. We believe that the proposed plasmonic circuits hold strong potential to provide robust integrated solutions for analog signal processing in the upcoming THz communications.
RESUMEN
SIGNIFICANCE: An increasing interest in the area of biological effects at exposure of tissues and cells to the terahertz (THz) radiation is driven by a rapid progress in THz biophotonics, observed during the past decades. Despite the attractiveness of THz technology for medical diagnosis and therapy, there is still quite limited knowledge about safe limits of THz exposure. Different modes of THz exposure of tissues and cells, including continuous-wave versus pulsed radiation, various powers, and number and duration of exposure cycles, ought to be systematically studied. AIM: We provide an overview of recent research results in the area of biological effects at exposure of tissues and cells to THz waves. APPROACH: We start with a brief overview of general features of the THz-wave-tissue interactions, as well as modern THz emitters, with an emphasis on those that are reliable for studying the biological effects of THz waves. Then, we consider three levels of biological system organization, at which the exposure effects are considered: (i) solutions of biological molecules; (ii) cultures of cells, individual cells, and cell structures; and (iii) entire organs or organisms; special attention is devoted to the cellular level. We distinguish thermal and nonthermal mechanisms of THz-wave-cell interactions and discuss a problem of adequate estimation of the THz biological effects' specificity. The problem of experimental data reproducibility, caused by rareness of the THz experimental setups and an absence of unitary protocols, is also considered. RESULTS: The summarized data demonstrate the current stage of the research activity and knowledge about the THz exposure on living objects. CONCLUSIONS: This review helps the biomedical optics community to summarize up-to-date knowledge in the area of cell exposure to THz radiation, and paves the ways for the development of THz safety standards and THz therapeutic applications.
Asunto(s)
Óptica y Fotónica , Radiación Terahertz , Reproducibilidad de los ResultadosRESUMEN
Potassium-ion batteries (PIBs) hold great potential as an alternative to lithium-ion batteries due to the abundant reserves of potassium and similar redox potentials of K+/K and Li+/Li. Unfortunately, PIBs with carbonaceous electrodes present sluggish kinetics, resulting in unsatisfactory cycling stability and poor rate capability. Herein, we demonstrate that the synergistic effects of the enlarged interlayer spacing and enhanced capacitive behavior induced by the co-doping of nitrogen and sulfur atoms into a carbon structure (NSC) can improve its potassium storage capability. Based on the capacitive contribution calculations, electrochemical impedance spectroscopy, the galvanostatic intermittent titration technique, and density functional theory results, the NSC electrode is found to exhibit favorable electronic conductivity, enhanced capacitive adsorption behavior, and fast K+ ion diffusion kinetics. Additionally, a series of ex-situ characterizations demonstrate that NSC exhibits superior structural stability during the (de)potassiation process. As a result, NSC displays a high reversible capacity of 302.8 mAh g-1 at 0.1 A g-1 and a stable capacity of 105.2 mAh g-1 even at 2 A g-1 after 600 cycles. This work may offer new insight into the effects of the heteroatom doping of carbon materials on their potassium storage properties and facilitate their application in PIBs.
RESUMEN
Potassium-ion batteries (PIBs) hold great potential in large-scale energy storage systems. Here, ß-FeOOH is employed as an anode for PIBs, exhibiting high capacity and good cycling stability. The study of potassium storage mechanism discloses that ß-FeOOH turns into an amorphous structure in the first discharge process, and remains stable in the amorphous state in the subsequent cycles.
RESUMEN
BACKGROUND: Acute myeloid leukemia (AML) is a disease with marked molecular heterogeneity and a high early death rate. Our aim was to investigate an integrated Gene expression, Mirna and miRNA-mRNA Interactions (GMI) signature for improving risk stratification of AML. METHODS: We identified differentially expressed genes by pooling a large number of 861 human AML patients and 75 normal cases. We then used miRWalk to identify the functional miRNA-mRNA regulatory module. The GMI signature based random survival forest (RSF) prognosis model was developed from training data set and evaluated in independent patient cohorts from The Cancer Genome Atlas (TCGA) dataset (N = 147). Univariate and multivariate Cox proportional hazards regression analyses were applied to evaluate the prognostic value of GMI signature. RESULTS: We identified 139 differentially expressed genes between normal and abnormal AML samples. We discovered the functional miRNA-mRNA regulatory module which participate in the network of cancer progression. We named 23 differentially expressed genes and 16 validated target miRNAs as the GMI signature. The RSF model-based scores separated independent patient cohorts into two groups with significantly different overall survival (C-index = 0.59, hazard ratio [HR], 2.12; 95% confidence interval [CI], 1.11-4.03; p = 0.019). Similar results were obtained with reversed training and testing datasets (C-index = 0.58, hazard ratio [HR], 2.08; 95% confidence interval [CI], 1.02-4.24; p = 0.038). The GMI signature score contributed more information about recurrence than standard clinical covariates. CONCLUSION: The GMI signature based RSF prognosis model not only reflects regulatory relationships from identified miRNA-mRNA module but also informs patient prognosis. While in the TCGA data set the GMI signature score contributed additional information about recurrence in comparison to standard clinical covariates, further studies are needed to determine its clinical significance.
Asunto(s)
Leucemia Mieloide Aguda/diagnóstico , Leucemia Mieloide Aguda/genética , MicroARNs/genética , Modelos Estadísticos , Adolescente , Estudios de Casos y Controles , Niño , Preescolar , Femenino , Perfilación de la Expresión Génica , Humanos , Lactante , Masculino , Análisis Multivariante , Pronóstico , ARN Mensajero/genética , Medición de Riesgo , Análisis de Supervivencia , Adulto JovenRESUMEN
Inspired by self-assembly of nano-hydroxyapatite (nHA) on collagen associated with the 67nm periodic microstructure of collagen, we used multi-walled carbon nanotubes (MWCNTs) with approximately 40nm bamboo periodic microstructure as a template for nHA deposition to form a nHA-MWCNT composite. The assembled apatite was analyzed by transmission electron microscopy and scanning electron microscopy. Defects that were analogous to edge dislocations along the carbon nanotubes' multi-walled surfaces were the nucleation sites for nHA after these defects had been functionalized principally into carboxylic groups. Spindle-shaped units consisting of an assembly of near parallel, fibril-like nHA polycrystals were formed and oriented at a certain angle to the long axis of the carbon nanotubes, unlike nHA-collagen in which the nHA is oriented along the longitudinal axis of the collagen molecule. One possible explanation for this difference is that there are more bonds for calcium chelation (-COOH, >CO) on the collagen fibril surface than on the surface of MWCNTs. Spindle-shaped units that are detached from the MWCNT template are able to maintain the ordered parallel structure of the nHA polycrystal fibril. We have thus created a self-assembled hydroxyapatite on MWCNTs.
Asunto(s)
Materiales Biocompatibles/química , Cristalización/métodos , Durapatita/química , Nanotubos de Carbono/química , Técnicas de Cultivo de Célula/métodos , Células Cultivadas , Ensayo de Materiales , Nanotubos de Carbono/ultraestructura , Tamaño de la Partícula , Ingeniería de Tejidos/métodosRESUMEN
OBJECTIVE: The purpose of this paper was to investigate the in vitro biodegradation of a guided tissue regeneration composite membrane, nano-carbonated hydroxyapatite/collagen/poly(lactic-co-glycolic acid) (nCHAC/PLGA). Especially for periodontal therapy, the functional graded material (FGM) nCHAC/PLGA membrane was prepared that consisted of three layers with 8 wt% nCHAC + PLGA/4 wt% nCHAC + PLGA/PLGA, where one face of the membrane is porous, thereby allowing cell growth thereon and the opposite face of the membrane smooth, thereby inhibiting cell adhesion. METHODS: For evaluation, in vitro degradation specimens of nCHAC/PLGA were immersed into artificial saliva solution at 37 degrees C for 1, 2, 4, 8 and 12 weeks to detect the weight loss over the period, and set pure PLGA membrane as control to compare the degraded behaviors. pH value and calcium concentration of the residual solution were measured, and morphology change was investigated by scanning electron microscopy (SEM). RESULTS: During the experimental period in vitro, the whole shape of the membrane could be kept for 4 weeks, after that it became powder at between 8 and 12 weeks. The results demonstrated that weight loss increased continuously with a reduction in mass of 23.1% after 4 weeks and 88% after 12 week for the nCHAC/PLGA three FGM layers composite membrane. The calcium concentration in the residual solution showed a significant increase after 4 weeks, which referred to the nano-carbonated hydroxyapatite degradation. Moreover, the pH value in the solution of the nCHAC/PLGA membrane was a little higher than that of the pure PLGA membrane, which demonstrated the possible neutralization effect from nCHAC composite for the acid outcome of PLGA in the solution. The pore structure of 8 wt% nCHAC + PLGA was enlarged on the porous surface, while the nonporous surface of pure PLGA also showed a small porous structure after increased time. SIGNIFICANCE: Degradation of the composite membrane is appropriate for practical periodontal repair. Moreover, the new mineral formation on the surface of the composite membrane referred to the possible positive effect in vivo for new bone tissue regeneration.
Asunto(s)
Implantes Absorbibles , Materiales Biocompatibles/química , Colágeno/química , Durapatita/química , Regeneración Tisular Guiada Periodontal/instrumentación , Ácido Láctico/química , Membranas Artificiales , Ácido Poliglicólico/química , Polímeros/química , Calcio/análisis , Humanos , Concentración de Iones de Hidrógeno , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Porosidad , Polvos , Saliva Artificial/química , Propiedades de Superficie , Temperatura , Factores de TiempoRESUMEN
A major challenge in clinical cancer research is the identification of accurate molecular subtype. While unsupervised clustering methods have been applied for class discovery, this clustering method remains a bottleneck in developing accurate method for molecular subtype discovery. In this analysis, we hypothesize that spectral clustering method could identify molecular subtypes in correlation with survival outcomes. We propose an accurate subtype identification method, Cancer Subtype Identification with Spectral Clustering using Nyström approximation (CSISCN), for the discovery of molecular subtypes, based on spectral clustering method. CSISCN could be used to improve gene expression-based identification of breast cancer molecular subtypes. We demonstrated that CSISCN identified the molecular subtypes with distinct clinical outcomes and was valid for the number of molecular subtypes. Furthermore, CSISCN identified molecular subtypes for improving clinical and molecular relevance which significantly outperformed consensus clustering and spectral clustering methods. To test the general applicability of the CSISCN, we further applied it on human CRC datasets and AML datasets and demonstrated superior performance as compared to consensus clustering method. In summary, CSISCN demonstrated the great potential in gene expression-based subtype identification.
Asunto(s)
Biomarcadores de Tumor/genética , Neoplasias de la Mama/diagnóstico , Neoplasias Colorrectales/diagnóstico , Regulación Neoplásica de la Expresión Génica , Genes Relacionados con las Neoplasias , Leucemia Mieloide Aguda/diagnóstico , Algoritmos , Neoplasias de la Mama/clasificación , Neoplasias de la Mama/genética , Neoplasias de la Mama/mortalidad , Análisis por Conglomerados , Neoplasias Colorrectales/clasificación , Neoplasias Colorrectales/genética , Neoplasias Colorrectales/mortalidad , Conjuntos de Datos como Asunto , Femenino , Perfilación de la Expresión Génica , Humanos , Leucemia Mieloide Aguda/clasificación , Leucemia Mieloide Aguda/genética , Leucemia Mieloide Aguda/mortalidad , Familia de Multigenes , Pronóstico , Análisis de SupervivenciaRESUMEN
OBJECTIVE: To determine the effect of porcelain firing cycle on microstructure of 4 metal ceramic alloys, and to analyze the changes of their corrosion resistance in the artificial saliva. METHODS: We simulated the process of firing and repolishing when fabricating porcelain-fused-to-metal restoration in clinic,and then observed the microstructures of Ni-Cr, Ni-Cr-Ti, Co-Cr alloys and high gold alloy by field emission scanning electron microscopy and energy dispersive spectroscopy. The electrochemical corrosion behavior of alloys in artificial saliva was analyzed by polarization curves and corrview 2 corrosion analysis software. The data of self-corrosion potential and transpassive potential were obtained and analyzed. RESULTS: After the porcelain firing cycle, the surface composition changed slightly, and the morphological in the 3 predominate base metal alloys also changed. The self-corrosion potential turned to more negative, and the transpassive potential declined. CONCLUSION: The procedure of porcelain firing cycle can affect the surface microstructure and increase the corrosion of 4 metal-ceramic alloys.
Asunto(s)
Porcelana Dental/química , Aleaciones de Cerámica y Metal/química , Corrosión , Técnica de Colado Dental , Microanálisis por Sonda Electrónica , Saliva Artificial , Propiedades de SuperficieRESUMEN
The electrical conductivity of pure Cu powder is typically deteriorated at elevated temperatures due to the oxidation by forming non-conducting oxides on surface, while enhancing oxidation resistance via alloying is often accompanied by a drastic decline of electrical conductivity. Obtaining Cu powder with both a high electrical conductivity and a high oxidation resistance represents one of the key challenges in developing next-generation electrical transferring powder. Here, we fabricate a Cu-Ag powder with a continuous Ag network along grain boundaries of Cu particles and demonstrate that this new structure can inhibit the preferential oxidation in grain boundaries at elevated temperatures. As a result, the Cu-Ag powder displays considerably high electrical conductivity and high oxidation resistance up to approximately 300 °C, which are markedly higher than that of pure Cu powder. This study paves a new pathway for developing novel Cu powders with much enhanced electrical conductivity and oxidation resistance in service.
RESUMEN
Geometric quantum computation in decoherence-free subspaces is of great practical importance because it can protect quantum information from both control errors and collective dephasing. However, previous proposed schemes have either states leakage or four-body interactions problems. Here, we propose a feasible scheme without these two problems. Our scheme is realized in two-qubit decoherence-free subspaces. Since the Hamiltonian we use is generic, our scheme looks promising to be demonstrated experimentally in different systems, including superconducting charge qubits.
RESUMEN
OBJECTIVE: To compare the bonding properties of three kinds of cements by observing the bonding inteffaces of cements and root canal dentin. METHODS: 15 extracted mandibular premolars were divided into 3 groups, and were cemented by Rely X luting, Panavia F and Paracore 5 mL, respectively. Each tooth was sectioned into two parts and the dentin-cement interfaces at the coronal, middle and apical parts of the fiber post were oberved by scanning electron microscope (SEM). The length of hybrid layer was also recorded. RESULTS: Hybrid layer was not clearly found in group one, which could be seen on the dentin-cement interfaces of group two and three. Resin tags and lateral adhesives were also observed in group three. From the apical to the coronal part, microgaps seemed gradually smaller in group one, while the hybrid layer became thicker in both group two and three. CONCLUSION: The total-etch resin cement bounds tightly with dentin, and owns a more superior bonding property than self-etch resin cement and resin modified glass ionomer cement.