Efficient Carrier Multiplication in Self-Powered Near-Ultraviolet γ-InSe/Graphene Heterostructure Photodetector with External Quantum Efficiency Exceeding 161.

Carrier multiplication (CM) in semiconductors, the process of absorbing a single high-energy photon to form two or more electron-hole pairs, offers great potential for the high-response detection of high-energy photons in the ultraviolet spectrum. However, compared to two-dimensional semiconductors, conventional bulk semiconductors not only face integration and flexibility bottlenecks but also exhibit inferior CM performance. To attain efficient CM for ultraviolet detection, we designed a two-terminal photodetector featuring a unilateral Schottky junction based on a two-dimensional γ-InSe/graphene heterostructure. Benefiting from a strong built-in electric field, the photogenerated high-energy electrons in γ-InSe, an ideal ultraviolet light-absorbing layer, can efficiently transfer to graphene without cooling. It results in efficient CM within the graphene, yielding an ultrahigh responsivity of 468 mA/W and a record-high external quantum efficiency of 161.2% when it is exposed to 360 nm light at zero bias. This work provides valuable insights into developing next-generation ultraviolet photodetectors with high performance and low-power consumption.

Role of HIF-1α in hypercoagulable state of COPD in rats.

OBJECTIVE: To explore the role of HIF-1α in hypercoagulable state of COPD induced by lipopolysaccharide plus smoking in rats. It also has to explore the regulatory mechanism of HIF-1α-EPO/EDN-1/VEGF pathway by using its activator and inhibitor. METHODS: 60 Sprague-Dawley rats (SD rats) were randomly divided into healthy control group, COPD hypercoagulable control group, activator group, and inhibitor group with 15 rats in each group. The healthy control group was fed freely. The other groups were given smoke and lipopolysaccharide by tracheal instillation to establish the experimental animal model of COPD hypercoagulability. After successful modeling, each experimental group was given 0.9 % sodium chloride solution and corresponding drugs by intraperitoneal injection for 7 days. Lung function was detected after drug administration. Hematoxylin-eosin staining was used to observe the pathological changes of lung tissue. Enzyme-linked immunosorbent assay was used to detect serum D-D,F (1 + 2),IL-6,TNF-α. The mRNA expressions of HIF-1α, EPO, EDN-1, and VEGF were detected by RT-PCR. Western-Blot and IHC were used to detect the expression of HIF-1α, EPO, EDN-1, and VEGF in lung tissue of rats. RESULTS: Compared with the healthy control group, rats in COPD hypercoagulable control group had COPD symptoms/signs, decreased lung function, increased the expression of serum D-D and F (1 + 2), increased the expression of inflammatory factors IL-6,TNF-α, and increased the expression of proteins HIF-1α, EPO, EDN-1 and VEGF. Compared with COPD hypercoagulable control group, lung function in activator group and inhibitor group had no obvious changes. The expressions of serum D-D,F (1 + 2),IL-6,TNF-α in activator group have increased noticeably. The expressions of proteins HIF-1α, EPO, EDN-1, and VEGF have further increased. Compared with COPD hypercoagulable control group, the expression of serum D-D, F (1 + 2), HIF-1α, EPO, EDN-1, and VEGF in the inhibitor group decreased. CONCLUSION: HIF-1α-EPO/EDN-1/VEGF pathway plays an important role in the hypercoagulable state of COPD. HIF-1α inhibitor can improve airway inflammation and reduce hypercoagulability in COPD model rats.

FHL3 promotes the formation of fast glycolytic muscle fibers by interacting with YY1 and muscle glycolytic metabolism.

The proportions of the various muscle fiber types are important in the regulation of skeletal muscle metabolism, as well as animal meat production. Four-and-a-half LIM domain protein 3 (FHL3) is highly expressed in fast glycolytic muscle fibers and differentially regulates the expression of myosin heavy chain (MyHC) isoforms at the cellular level. Whether FHL3 regulates the transformation of muscle fiber types in vivo and the regulatory mechanism is unclear. In this study, muscle-specific FHL3 transgenic mice were generated by random integration, and lentivirus-mediated gene knockdown or overexpression in muscles of mice or pigs was conducted. Functional analysis showed that overexpression of FHL3 in muscles significantly increased the proportion of fast-twitch myofibers and muscle mass but decreased muscle succinate dehydrogenase (SDH) activity and whole-body oxygen consumption. Lentivirus-mediated FHL3 knockdown in muscles significantly decreased muscle mass and the proportion of fast-twitch myofibers. Mechanistically, FHL3 directly interacted with the Yin yang 1 (YY1) DNA-binding domain, repressed the binding of YY1 to the fast glycolytic MyHC2b gene regulatory region, and thereby promoted MyHC2b expression. FHL3 also competed with EZH2 to bind the repression domain of YY1 and reduced H3K27me3 enrichment in the MyHC2b regulatory region. Moreover, FHL3 overexpression reduced glucose tolerance by affecting muscle glycolytic metabolism, and its mRNA expression in muscle was positively associated with hemoglobin A1c (HbA1c) in patients with type 2 diabetes. Therefore, FHL3 is a novel potential target gene for the treatment of muscle metabolism-related diseases and improvement of animal meat production.

Ultrahigh Detectivity Broad Spectrum UV Photodetector with Rapid Response Speed Based on p-ß Ga2 O3 /n-GaN Heterojunction Fabricated by a Reversed Substitution Doping Method.

An excellent broad-spectrum (220-380 nm) UV photodetector, covering the UVA-UVC wavelength range, with an ultrahigh detectivity of ≈1015  cm Hz1/2 W-1 , is reported. It is based on a p-ß Ga2 O3 /n-GaN heterojunction, in which p-ß Ga2 O3 is synthesized by thermal oxidation of GaN and a heterostructure is constructed with the bottom n-GaN. XRD shows the oxide layer is (-201) preferred oriented ß-phase Ga2 O3 films. SIMS and XPS indicate that the residual N atoms as dopants remain in ß Ga2 O3 . XPS also demonstrates that the Fermi level is 0.2 eV lower than the central level of the band gap, indicating that the dominant carriers are holes and the ß Ga2 O3 is p-type conductive. Under a bias of -5 V, the photoresponsivity is 56 and 22 A W-1 for 255 and 360 nm, respectively. Correspondingly, the detectivities reach an ultrahigh value of 2.7 × 1015  cm Hz1/2 W-1 (255 nm) and 1.1 × 1015  cm Hz1/2 W-1 (360 nm). The high performance of this UV photodetector is attributed mainly to the continuous conduction band of the p-ß Ga2 O3 /n-GaN heterojunction without a potential energy barrier, which is more helpful for photogenerated electron transport from the space charge region to the n-type GaN layer.

Multi-Wavelength-Recognizable Memristive Devices via Surface Plasmon Resonance Effect for Color Visual System.

Photoelectric memristor has attracted many attentions thanks to their promising potential in optical communication chips and artificial vision systems. However, the implementation of an artificial visual system based on memristive devices remains a considerable challenge because most photoelectric memristors cannot recognize color. Herein, multi-wavelength recognizable memristive devices based on silver(Ag) nanoparticles (NPs) and porous silicon oxide (SiOx ) nanocomposites are presented. Rely on the effects of localized surface plasmon resonance (LSPR) and optical excitation of Ag NPs in SiOx , the set voltage of the device can be gradually reduced. Moreover, the current overshoot problem is alleviated to suppress conducting filament overgrowth after visible light irradiation with different wavelengths, resulting in diverse low resistance states (LRS). Taking advantage of the characteristics of controlled switching voltage and LRS resistance distribution, color image recognition is finally realized in the present work. X-ray photoelectron spectroscopy (XPS) and conductive atomic force microscopy (C-AFM) show that the light irradiation plays an important role on resistive switching (RS) process: the photo-assisted Ag ionization leads to a significant reduction of set voltage and overshoot current. This work provides an effective method toward the development of multi-wavelength-recognizable memristive devices for future artificial color vision system.

Plastidial engineering with coupled farnesyl diphosphate pool reconstitution and enhancement for sesquiterpene biosynthesis in tomato fruit.

Sesquiterpenes represent a large class of terpene compounds found in plants with broad applications such as pharmaceuticals and biofuels. The plastidial MEP pathway in ripening tomato fruit is naturally optimized to provide the 5-carbon isoprene building blocks of all terpenes for production of the tetraterpene pigment lycopene and other carotenoids, making it an excellent plant system to be engineered for production of high-value terpenoids. We reconstituted and enhanced the pool of sesquiterpene precursor farnesyl diphosphate (FPP) in plastids of tomato fruit by overexpressing the fusion gene DXS-FPPS encoding a fusion protein of 1-deoxy-D-xylulose 5-phosphate synthase (DXS) linked with farnesyl diphosphate synthase (originally called farnesyl pyrophosphate synthase, and abbreviated as FPPS) under the control of fruit-ripening specific polygalacturonase (PG) promoter concomitant with substantial reduction in lycopene content and large production of FPP-derived squalene. The supply of precursors achieved by the fusion gene expression can be harnessed by an engineered sesquiterpene synthase that is retargeted to plastid to engineer high-yield sesquiterpene production in tomato fruit, offering an effective production system for high-value sesquiterpene ingredients.

Dynamic polarization-regulated metasurface with variable focal length.

Polarization and focal length are both critical optical parameters with many applications in many fields, such as optical communications and imaging. The development of metasurfaces provides a new realization of optical systems. In this paper, based on metasurfaces' powerful electromagnetic modulation capability, we integrate polarization conversion with continuous zoom function and propose a dynamic polarization-regulated metasurface with variable focal length. It realizes the reversible conversion of polarization state, which can convert linearly polarized light into elliptically polarized light and circularly polarized light and convert circularly polarized light to linearly polarized light. At the same time, it achieves a 4.4× zoom range, with a constant focal length variation from 70 µm to 309 µm. The metasurface has the advantages of small size, easy integration, and reconfigurability, providing a new design idea for complex functional optical systems.

Engineering Relaxation-Paths of C-Exciton for Constructing Band Nesting Bypass in WS2 Monolayer.

Transition-metal dichalcogenides exhibit strong photon absorption characteristics in the band nesting region (denoted as C-exciton) due to intrinsic van Hove singularities despite being atomically thin. However, because of unique parallel band structure and ineluctably unfavorable recombination process, only a small fraction of the hot carriers from C-excitons are converted into optically active band-edge excitons via inherent relaxation-paths. The resultant photoluminescence quantum yield (PLQY) is severely suppressed for the resonant excitation of C-exciton. To overcome this limitation, we have designed double type-I band alignments to construct a band nesting bypass in a monolayer WS2/CdS quantum dot heterostructure for cooling the C-excitons. Transient optical measurements confirmed that the hot carriers from the C-excitons were effectively transferred from WS2 to CdS with an efficiency of 50% and subsequently back to the WS2 band-edge to form A-excitons over an ultrafast subpicosecond time scale, accompanied by a record high PLQY of ∼11.1% for near-resonance C-exciton excitation.

Structural basis for juvenile hormone biosynthesis by the juvenile hormone acid methyltransferase.

Juvenile hormone (JH) acid methyltransferase (JHAMT) is a rate-limiting enzyme that converts JH acids or inactive precursors of JHs to active JHs at the final step of JH biosynthesis in insects and thus presents an excellent target for the development of insect growth regulators or insecticides. However, the three-dimensional properties and catalytic mechanism of this enzyme are not known. Herein, we report the crystal structure of the JHAMT apoenzyme, the three-dimensional holoprotein in binary complex with its cofactor S-adenosyl-l-homocysteine, and the ternary complex with S-adenosyl-l-homocysteine and its substrate methyl farnesoate. These structures reveal the ultrafine definition of the binding patterns for JHAMT with its substrate/cofactor. Comparative structural analyses led to novel findings concerning the structural specificity of the progressive conformational changes required for binding interactions that are induced in the presence of cofactor and substrate. Importantly, structural and biochemical analyses enabled identification of one strictly conserved catalytic Gln/His pair within JHAMTs required for catalysis and further provide a molecular basis for substrate recognition and the catalytic mechanism of JHAMTs. These findings lay the foundation for the mechanistic understanding of JH biosynthesis by JHAMTs and provide a rational framework for the discovery and development of specific JHAMT inhibitors as insect growth regulators or insecticides.

Engineering of tomato type VI glandular trichomes for trans-chrysanthemic acid biosynthesis, the acid moiety of natural pyrethrin insecticides.

Glandular trichomes, known as metabolic cell factories, have been proposed as highly suitable for metabolically engineering the production of plant high-value specialized metabolites. Natural pyrethrins, found only in Dalmatian pyrethrum (Tanacetum cinerariifolium), are insecticides with low mammalian toxicity and short environmental persistence. Type I pyrethrins are esters of the monoterpenoid trans-chrysanthemic acid with one of the three rethrolone-type alcohols. To test if glandular trichomes can be made to synthesize trans-chrysanthemic acid, we reconstructed its biosynthetic pathway in tomato type VI glandular trichomes, which produce large amounts of terpenoids that share the precursor dimethylallyl diphosphate (DMAPP) with this acid. This was achieved by coexpressing the trans-chrysanthemic acid pathway related genes including TcCDS encoding chrysanthemyl diphosphate synthase and the fusion gene of TcADH2 encoding the alcohol dehydrogenase 2 linked with TcALDH1 encoding the aldehyde dehydrogenase 1 under the control of a newly identified type VI glandular trichome-specific metallocarboxypeptidase inhibitor promoter. Whole tomato leaves harboring type VI glandular trichomes expressing all three aformentioned genes had a concentration of total trans-chrysanthemic acid that was about 1.5-fold higher (by mole number) than the levels of ß-phellandrene, the dominant monoterpene present in non-transgenic leaves, while the levels of ß-phellandrene and the representative sesquiterpene ß-caryophyllene in transgenic leaves were reduced by 96% and 81%, respectively. These results suggest that the tomato type VI glandular trichome is an alternative platform for the biosynthesis of trans-chrysanthemic acid by metabolic engineering.

Synthesis of 4-methylvaleric acid, a precursor of pogostone, involves a 2-isobutylmalate synthase related to 2-isopropylmalate synthase of leucine biosynthesis.

We show here that the side chain of pogostone, one of the major components of patchouli oil obtained from Pogostemon cablin and possessing a variety of pharmacological activities, is derived from 4-methylvaleric acid. We also show that 4-methylvaleric acid is produced through the one-carbon α-ketoacid elongation pathway with the involvement of the key enzyme 2-isobutylmalate synthase (IBMS), a newly identified enzyme related to isopropylmalate synthase (IPMS) of leucine (Leu) biosynthesis. Site-directed mutagenesis identified Met132 in the N-terminal catalytic region as affecting the substrate specificity of PcIBMS1. Even though PcIBMS1 possesses the C-terminal domain that in IPMS serves to mediate Leu inhibition, it is insensitive to Leu. The observation of the evolution of IBMS from IPMS, as well as previously reported examples of IPMS-related genes involved in making glucosinolates in Brassicaceae, acylsugars in Solanaceae, and flavour compounds in apple, indicate that IPMS genes represent an important pool for the independent evolution of genes for specialised metabolism.

Multi-mode plasmonic resonance broadband LWIR metamaterial absorber based on lossy metal ring.

Broadband perfect infrared wave absorption of unpolarized light over a wide range of angles in an ultrathin film is critical for applications such as thermal emitters and imaging. Although many efforts have been made in infrared broadband absorption, it is still challenging to cover the perfect absorption of broadband in the long-wave infrared band. We propose a long-wave infrared broadband, polarization, and incident angle insensitivity metamaterial absorber based on the supercell with four rings of two sizes. Broadband absorption covering the long-wave infrared band is realized by combining four PSPRs and LSPRs absorption peaks excited by the supercell structure. The absorptivity of our absorber exceeds 90% in the wavelength range of 7.76∼14µm, and the average absorptivity reaches 93.8%. The absorber maintains more than 80% absorptivity as the incident angle of unpolarized light reaches 60°, which may have promising applications for thermal emitters, infrared imaging, thermal detection.

Polarization-selective absorptive and transmissive metamaterials.

A polarization sorting metamaterial with polarization filtering and absorption is proposed. When unpolarized incident light strikes the metamaterial, one polarization component is completely absorbed, and the other polarization component is completely transmitted. We achieved an absorption extinction ratio of up to 350 and a transmission extinction ratio of 425 simultaneously in the LWIR. Unlike the 50% energy utilization limit of other polarization absorbers due to the complete reflection of another polarization component, our proposed metamaterial can be composed of layered polarization selective absorption devices to achieve more than 90% energy utilization. Therefore our design can provide a new solution for real-time polarization detection.

Transcutaneous electrical acupoint stimulation affects older adults' cognition after general anesthesia: A meta-analysis.

Perioperative neurocognitive dysfunction comprises pre-existing neurocognitive dysfunction, postoperative delirium (POD), and postoperative cognitive dysfunction (POCD). This meta-analysis aims to study the effects of transcutaneous electrical acupoint stimulation (TEAS) on postoperative cognitive function after general anesthesia in older adults. Eight databases were searched, from the establishment of the databases to January 2022. Eighteen randomized controlled trials were included. TEAS reduced POCD incidence on the 1st and 3rd but not on the 5th and 7th postoperative days (p<0.00001; p<0.00001; p = 0.20; p = 0.30). Owing to the limited number of original studies, POD incidence could not be analyzed. TEAS improved the MMSE scores on the 1st and 3rd but not on the 5th and 7th postoperative days. TEAS reduced the values of S100ß at the end of the surgery and 1 day after surgery and IL-6 on the 1st postoperative day. TEAS can prevent early postoperative cognitive decline after general anesthesia in older adults.

Characterization of a Cytosolic Acyl-Activating Enzyme Catalyzing the Formation of 4-Methylvaleryl-CoA for Pogostone Biosynthesis in Pogostemon Cablin.

Pogostone, a compound with various pharmaceutical activities, is a major constituent of the essential oil preparation called Pogostemonis Herba, which is obtained from the plant Pogostemon cablin. The biosynthesis of pogostone has not been elucidated, but 4-methylvaleryl-CoA (4MVCoA) is a likely precursor. We analyzed the distribution of pogostone in P. cablin using gas chromatography-mass spectrometry (GC-MS) and found that pogostone accumulates at high levels in the main stems and leaves of young plants. A search for the acyl-activating enzyme (AAE) that catalyzes the formation of 4MVCoA from 4-methylvaleric acid was launched, using an RNAseq-based approach to identify 31 unigenes encoding putative AAEs including the PcAAE2, the transcript profile of which shows a strong positive correlation with the distribution pattern of pogostone. The protein encoded by PcAAE2 was biochemically characterized in vitro and shown to catalyze the formation of 4MVCoA from 4-methylvaleric acid. Phylogenetic analysis showed that PcAAE2 is closely related to other AAE proteins in P. cablin and other species that are localized to the peroxisomes. However, PcAAE2 lacks a peroxisome targeting sequence 1 (PTS1) and is localized in the cytosol.

Zeolite-Based Memristive Synapse with Ultralow Sub-10-fJ Energy Consumption for Neuromorphic Computation.

The development of neuromorphic computation faces the appreciable challenge of implementing hardware with energy consumption on the level of a femtojoule per synaptic event to be comparable with the energy consumption of human brain. Controllable ultrathin conductive filaments are needed to achieve such extremely low energy consumption in memristive synapses but their formation is difficult to control owing to their stochastic morphology and unexpected overgrowth. Herein, a zeolite-based memristive synapse is demonstrated for the first time, in which Ag exchange in the sub-nanometer pore closely resembles synaptic Ca2+ dynamics across biomembrane channel. Particularly, the confined ultrasmall pore and low Ag ion migration barrier give the zeolite-based memristive synapse ultralow energy consumption below 10 fJ per synaptic spike, on par with the biological counterpart. Experimental results reveal that the gradual memristive effect is attributed to the dimension modulation of Ag clusters. In addition to emulating inherent cognitive functions through electrical stimulations, the experience-dependent transition of short-term plasticity to long-term plasticity using a chemical modulation method is achieved by treating the initial Ag quantity as a learning experience. The proposed memristors can be used to develop highly efficient memristive neural networks and are considered as a candidate for application in neuromorphic computation.

Broadband long-wave infrared metamaterial absorber based on single-sized cut-wire resonators.

Broadband absorption is critical for the applications of metamaterial absorbers. In this work, a broadband long-wave infrared (LWIR) absorber with classical metal-dielectric-metal configuration is numerically demonstrated. The absorber consists of single-sized cut-wire arrays that show broadband and high extinction ratio, attributed to polarization-selective simultaneous excitation of propagated and localized surface plasmon resonances. The average absorption rate of the TM wave reaches 91.7% and 90% of the incident light is absorbed by the resonator in the wavelength range of 7.5-13.25µm so that the average extinction ratio in the resonator layer reaches 125. The polarization insensitive broadband absorption can be obtained by a cross resonator which can be treated as a pair of cut-wires perpendicular to each other. Our metamaterial absorber with single-sized resonators shows spatially concentrated broadband absorption and may have promising applications for hot-electron devices, infrared imaging, and thermal detection.

Polarization-dependent broadband absorber based on composite metamaterials in the long-wavelength infrared range.

Capturing polarization information has long been an important topic in the field of detection. In this study, two polarization-dependent broadband absorbers based on a composite metamaterial structure were designed and numerically investigated. Unlike in conventional metamaterial absorbers, the bottom metallic film is functionalized to achieve a polarization response or broadband absorption. The simulation results show that the type I absorber exhibits TM polarization-dependent broadband absorption (absorptivity>80%) from 8.37 µm to 12.12 µm. In contrast, the type II absorber presents TE polarization-dependent broadband absorption (absorptivity>80%) from 8.23 µm to 11.93 µm. These devices are extremely sensitive to the change of polarization angle. The absorptivity changes monotonically with an increase of the polarization angle, but it is insensitive to oblique incidence. This design paves the way for realizing broadband polarization-dependent absorption via a simple configuration. It has bright prospects in thermal detection applications and imaging fields.

Dual-band metamaterial absorber with a low-coherence composite cross structure in mid-wave and long-wave infrared bands.

The atmospheric window in the infrared (IR) band primarily consists of mid-wave (MWIR, 3-5 µm) and long-wave IR (LWIR, 8-12 µm) bands, also known as the working bands in most of the IR devices. The main factor affecting the device capability includes the absorption efficiency, hence, the absorption material. Herein, a dual-band absorber based on the composite cross structure (CCS) in both MWIR and LWIR bands was proposed, with absorption peaks of 4.28 µm and 8.23 µm. The obtained absorber is with high scalability in the MWIR and LWIR region respectively by tuning the structural parameters. A quadrupole polarization model is proposed for further understanding of the uneven distribution of electromagnetic field that was caused by the change of the center spacing of the embedded structure. Meanwhile, it was shown that the two absorption peaks exhibited good incident angle stability. In addition, as the incident angle of the TM mode increases, a waveguide is formed between the embedded structure and the surface structure, leading to another strong absorption in the LWIR band. The results showed that absorption increases as the incident angle increases. The proposed absorber can be a good candidate for applications in thermal emission, detection and solar energy harvesting.

ROCK-TAZ signaling axis regulates mechanical tension-induced osteogenic differentiation of rat cranial sagittal suture mesenchymal stem cells.

Mechanical force across sutures is able to promote suture osteogenesis. Orthodontic clinics often use this biological characteristic of sutures to treat congenital cranio-maxillofacial malformations. However, the underlying mechanisms still remain poorly understood. Craniofacial sutures provide a special growth source and support primary sites of osteogenesis. Here, we isolated rat sagittal suture cells (rSAGs), which had mesenchymal stem cell characteristics and differentiating abilities. Cells were then subjected to mechanical tension (5% elongation, 0.5 Hz; sinusoidal waveforms) showing that mechanical tension could enhance osteogenic differentiation but hardly affect proliferation of rSAGs. Besides, mechanical tension could increase Rho-associated kinase (ROCK) expression and enhance transcriptional coactivator with PDZ-binding motif (TAZ) nuclear translocation. Inhibiting ROCK expression could suppress tension-induced osteogenesis and block tension-induced upregulation of nuclear TAZ. In addition, our results indicated that TAZ had direct combination sites with runt-related transcription factor 2 (Runx2) in rSAGs, and knock-downed TAZ simultaneously decreased the expression of Runx2 no matter with or without mechanical tension. In summary, our findings demonstrated that the multipotency of rSAGs in vitro could give rise to early osteogenic differentiation under mechanical tension, which was mediated by ROCK-TAZ signal axis.