RESUMEN
The determination of ammonium ions (NH4+) is of significance to environmental, agriculture, and human health. Potentiometric NH4+ sensors based on solid-contact ion selective electrodes (SC-ISEs) feature point-of-care testing and miniaturization. However, the state-of-the-art SC-ISEs of NH4+ during the past 20 years strongly rely on the organic ammonium ionophore-based ion selective membrane (ISM), typically by nonactin for the NH4+ recognition. Herein, we report a Prussian blue analogue of copper(II)-hexacyanoferrate (CuHCF) for an ISM-free potentiometric NH4+ sensor without using the ionophores. CuHCF works as a bifunctional transducer that could realize the ion-to-electron transduction and NH4+ recognition. CuHCF exhibits competitive analytical performances regarding traditional nonactin-based SC-ISEs of NH4+, particularly for the selectivity toward K+. The cost and preparation process have been remarkably reduced. The theoretical calculation combined with electrochemical tests further demonstrate that relatively easier intercalation of NH4+ into the lattices of CuHCF determines its selectivity. This work provides a concept of the ISM-free potentiometric NH4+ sensor beyond the nonactin ionophore through a CuHCF bifunctional transducer.
Asunto(s)
Compuestos de Amonio , Electrodos de Iones Selectos , Ferrocianuros , Humanos , Ionóforos , Macrólidos , TransductoresRESUMEN
Fluorescence imaging, as one of the important means of biological lesion analysis, is widely used in medical analysis. To improve detection specificity, near-infrared emission fluorescent probes have been developed. Sensitive and selective near-infrared (NIR) fluorescent probes for Hg2+ , which is a heavy metal ion harmful to human health, are urgently needed to investigate the physiological toxicity of Hg2+ . The NIR fluorophore based on the traditional structure of rhodamine was prepared by introducing anthocyanin functional groups, and a rhodamine spiro ring structure was constructed to recognize Hg2+ (CCS-Hg). The probe CCS-Hg demonstrated good selectivity and high detection sensitivity for Hg2+ and the most likely mechanism was verified through theoretical calculations. We applied the probe CCS-Hg in the examination of Hg2+ distribution in living cells by NIR fluorescence imaging. This work provides a promising molecular tool for studying the toxicological effects of mercury ions in cell.
Asunto(s)
Mercurio , Colorantes Fluorescentes , Células HeLa , Humanos , Mercurio/toxicidad , Imagen Óptica , Rodaminas , Espectrometría de FluorescenciaRESUMEN
The solid-contact ion-selective electrodes (SC-ISEs) are a type of potentiometric analytical device with features of rapid response, online analysis, and miniaturization. The state-of-the-art SC-ISEs are composed of a solid-contact (SC) layer and an ion-selective membrane (ISM) layer with respective functions of ion-to-electron transduction and ion recognition. Two challenges for the SC-ISEs are the water-layer formation at the SC/ISM phase boundary and the leaking of ISM components, which are both originated from the ISM. Herein, we report a type of SC-ISE based on classic Li-ion battery materials as the SC layer without using the ISM for potentiometric lithium-ion sensing. Both LiFePO4- and LiMn2O4-based SC-ISEs display good Li+ sensing properties (sensitivity, selectivity, and stability). The proposed LiFePO4 electrode exhibits comparable sensitivity and a linear range to conventional SC-ISEs with ISM. Owing to the nonexistence of ISM, the LiFePO4 electrode displays high potential stability. Besides, the LiMn2O4 electrode shows a Nernstian response toward Li+ sensing in a human blood serum solution. This work emphasizes the concept of non-ISM-based SC-ISEs for potentiometric ion sensing.
Asunto(s)
Electrodos de Iones Selectos , Litio , Suministros de Energía Eléctrica , Humanos , Iones , PotenciometríaRESUMEN
Wearable sensors reflect the real-time physiological information and health status of individuals by continuously monitoring biochemical markers in biological fluids, including sweat, tears and saliva, and are a key technology to realize portable personalized medicine. Flexible electrochemical pH sensors can play a significant role in health since the pH level affects most biochemical reactions in the human body. pH indicators can be used for the diagnosis and treatment of diseases as well as the monitoring of biological processes. The performances and applications of wearable pH sensors depend significantly on the properties of the pH-sensitive materials used. At present, existing pH-sensitive materials are mainly based on polyaniline (PANI), hydrogen ionophores (HIs) and metal oxides (MOx). In this review, we will discuss the recent progress in wearable pH sensors based on these sensitive materials. Finally, a viewpoint for state-of-the-art wearable pH sensors and a discussion of their existing challenges are presented.
RESUMEN
Current solid potentiometric ion sensors mostly rely on polymeric-membrane-based, solid-contact, ion-selective electrodes (SC-ISEs). However, anion sensing has been a challenge with respect to cations due to the rareness of anion ionophores. Classic metal/metal insoluble salt electrodes (such as Ag/AgCl) without an ion-selective membrane (ISM) offer an alternative. In this work, we first compared the two types of SC-ISEs of Cl- with/without the ISM. It is found that the ISM-free Ag/AgCl electrode discloses a comparable selectivity regarding organic chloride ionophores. Additionally, the electrode exhibits better comprehensive performances (stability, reproducibility, and anti-interference ability) than the ISM-based SC-ISE. In addition to Cl-, other Ag/AgX electrodes also work toward single and multi-valent anions sensing. Finally, a flexible Cl- sensor was fabricated for on-body monitoring the concentration of sweat Cl- to illustrate a proof-of-concept application in wearable anion sensors. This work re-emphasizes the ISM-free SC-ISEs for solid anion sensing.
RESUMEN
We designed and synthesized a water-soluble near-infrared (NIR) fluorescent probe with the recognition unit of the cyanine-like structure and acrylate group. Through an aromatic ring nucleophilic substitution reaction based on sulfhydryl moiety, an off-on fluorescence response toward cysteine (Cys) was realized. The probe exhibited excellent spectral performance with an emission wavelength of 720nm and a detection limit of 0.20µM. The spectral properties, selectivity and anti-interference performance of the probe were systematically investigated. Density functional theory (DFT) calculations were conducted to clarify the luminescence mechanism of the probe. Furthermore, the probe was successfully applied to the detection of free Cys in human serum and the NIR imaging of endogenous Cys in living cells. Thus, the probe has a promising application prospect in clinical diagnosis and fluorescence imaging.
Asunto(s)
Cisteína/análisis , Colorantes Fluorescentes , Imagen Molecular/métodos , Línea Celular Tumoral , Cisteína/metabolismo , Fluorescencia , Colorantes Fluorescentes/aislamiento & purificación , Colorantes Fluorescentes/farmacología , Humanos , Rayos Infrarrojos , Límite de Detección , Análisis de la Célula Individual/métodos , Solubilidad , Espectroscopía Infrarroja Corta/métodos , Agua/químicaRESUMEN
Typically, sialic acids (SA) with a nine-carbon backbone are found at the glycan chain termini on the cell membranes, which play crucial roles in various physiological and pathological processes. The expression level of SA in the blood serum has been reported to correlate with various disease states among cancer. In this study, a novel approach for preparing fluorescent boronic-acid-modified carbon dots (C-dots) for the detection of SA was developed. The functionalized C-dots were synthesized by a facile, one-step hydrothermal method using 3-pyridineboronic acid as the sole carbon source. The added SA selectively recognized the C-dots, leading to the fluorescence quenching of the C-dots in a linear range of 80-4000⯵M with a detection limit of 54⯵M. The as-developed boronic-acid nanoprobe was successfully applied for the detection of SA in human serum samples with satisfactory results. In addition, this method afforded results within 4â¯min. Compared to other methods, this new proposed approach was simpler and exhibited excellent sensitivity and selectivity, demonstrating immense potential as an alternative for SA detection.
RESUMEN
Development of novel near-infrared (NIR) fluorescent probes for the monitoring of active substances in living organism is desirable in biological studies. Herein, we designed a novel NIR MTR fluorophore which has a longer emission wavelength, greater Stokes shift and higher quantum yield than the classic hemicyanine NIR fluorophore. The synthesized MTR-derived NIR probe (MTR-P) is highly selective and sensitive to alkaline phosphatase (ALP) activity. In the presence of ALP, MTR-P exhibited increased fluorescence signal by up to 56 fold at 723 nm, and it was determined to be 0.042 U L-1. In addition, the mechanism of the MTR-P probe was further examined by HPLC, mass spectrometry and DFT/TDDFT calculations. The NIR probe MTR-P was successfully applied to measure the levels of alkaline phosphatase in different types of cells by fluorescence imaging.
Asunto(s)
Fosfatasa Alcalina/metabolismo , Fluorescencia , Rayos Infrarrojos/uso terapéutico , HumanosRESUMEN
A novel fluorescence detection method based on competitive immunoassay and magnetic bioseparation technique was developed and applied to the determination of pig immunoglobulin G (IgG) in serum samples. Core-shell structured Fe3O4@SiO2 nanoparticles were synthesized by chemical coprecipitation, followed by functionalization with amino groups and immobilization of pig IgG antibodies. The synthesized Fe3O4@SiO2-antibody nanoparticles were employed as the probe for the competitive immune recognition of the target antigens in samples and the antigens labeled with fluorescein isothiocyanate (FITC). After the magnetic separation of probes binding with these two types of antigens, fluorescence of the free FITC-labeled antigens was measured for the quantification of the target antigens, since the ratio of the FITC-labeled antigens in supernatant before and after the competitive immune recognition depends on the amount of the target antigens in sample, due to the competitive nature of the binding of the antibody for these two types of antigens. Under the optimal conditions, a linear relationship was obtained between the change of fluorescence intensity and the concentration of pig IgG in a range from 0.75 to 23.50⯵gâ¯L-1, with a detection limit (LOD) of 0.031⯵gâ¯L-1. With the facile-prepared probes, this fluorescence competitive method can provide a rapid, specific and highly sensitive immunoassay protocol for the determination of target proteins in complex matrix samples.