Anti-Obesity and Gut Microbiota Regulation Effects of Phospholipids from the Eggs of Crab, Portunus Trituberculatus, in High Fat Diet-Fed Mice.

There are resourceful phospholipids in the eggs of the crab, Portunus trituberculatus (Pt-PL). However, their components and bioactivities regarding obesity were unclear. Here, we investigated the composition of Pt-PL and their fatty acids. Moreover, its effects on obesity and gut microbiota were also evaluated in high fat diet (HFD)-fed mice. The results showed that Pt-PL contained 12 kinds of phospholipids, mainly including phosphatidylcholine (PC, 32.28%), phosphatidylserine (PS, 26.51%), phosphatidic acid (PA, 19.61%), phosphatidylethanolamine (PE, 8.81%), and phosphatidylinositol (PI, 7.96%). Polyunsaturated fatty acids (PUFAs) predominated in the fatty acids components of Pt-PL, especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). Animal experiments demonstrated that Pt-PL significantly alleviated body weight gain, adipose gain, hepatic gain, fasting blood glucose, serum insulin, lipid levels in serum and the liver, and systematic inflammation in HFD-fed mice. Furthermore, Pt-PL regulated gut microbiota, especially in a dramatic reduction in the ratio of Firmicutes to Bacteroidetes at phylum level, as well as significant amelioration in their subordinate categories. Pt-PL reduced fecal lipopolysaccharide and total bile acids, and elevated fecal short chain fatty acid (SCFA) concentrations, particularly acetate and butyrate. These findings suggest that Pt-PL possesses anti-obesity effects and can alter gut microbiota owing to the abundance of PUFAs. Therefore, Pt-PL may be developed as an effective food supplement for anti-obesity and regulation of human gut health.

Low Molecular Weight, 4-O-Sulfation, and Sulfation at Meta-Fucose Positively Promote the Activities of Sea Cucumber Fucoidans on Improving Insulin Resistance in HFD-Fed Mice.

Fucoidans from sea cucumber (SC-FUC) have been proven to alleviate insulin resistance in several species. However, there are few studies that clarify the relationship between their structure and bioactivity. The present study evaluated the influence of molecular weight (Mw), sulfation concentrations (Cs), and sulfation position on improving insulin resistance using SC-FUC. Results showed that fucoidans with lower Mw exerted stronger effects. Having a similar Mw, Acaudina molpadioides fucoidans (Am-FUC) with lower Cs and Holothuria tubulosa fucoidans with higher Cs showed similar activities. However, Isostichopus badionotus fucoidans (higher Cs) activity was superior to that of low-Mw Thelenota ananas fucoidans (Ta-LFUC, lower Cs). Eliminating the effects of Mw and Cs, the bioactivity of Am-FUC with sulfation at meta-fucose exceeded that of Ta-FUC with sulfation at ortho-position. Moreover, the effects of Pearsonothuria graeffei fucoidans with 4-O-sulfation were superior to those of Am-LFUC with 2-O-sulfation. These data indicate that low Mw, 4-O-sulfation, and sulfation at meta-fucose contributed considerably to insulin resistance alleviation by SC-FUC, which could accelerate the development of SC-FUC as a potential food supplement to alleviate insulin resistance.

Long-Chain Bases from Sea Cucumber Alleviate Obesity by Modulating Gut Microbiota.

This study evaluated the effects of long-chain bases from sea cucumber (SC-LCBs) on modulation of the gut microbiota and inhibition of obesity in high fat diet-fed mice. Results showed that SC-LCBs exerted significant antiobese effects, which were associated with the inhibition of hyperglycemia and lipid accumulation. SC-LCBs also regulated serum adipocytokines toward to normal levels. SC-LCBs caused significant decreases in Firmicutes, Actinobacteria phylum, and obesity-related bacteria (Desulfovibro, Bifidobacterium, Romboutsia etc. genus). SC-LCBs also elevated Bacteroidetes, Proteobacteria, Verrucomicrobia phylum, and short chain fatty acids (SCFAs)-producing bacteria (Bacteroides, Lactobacillus, Lachnospiraceae_NK4A136_group etc. genus). Moreover, serum and fecal lipoplysaccharide (LPS) concentrations and its dependent toll-line receptor 4 pathway were inhibited by SC-LCBs treatment. SC-LCBs caused increases in fecal SCFAs and their mediated G-protein-coupled receptors proteins. These suggest that SC-LCBs alleviate obesity by altering gut microbiota. Thus, it sought to indicate that SC-LCBs can be developed as food supplement for the obesity control and the human gut health.

Effects of Different Roasting Methods on the Quality of Roasted Large Yellow Croaker (Larimichthys crocea).

This study investigated the effects of different roasting methods (45% light wave and 55% microwave roasting, 70% light wave and 30% microwave roasting, 100% light wave roasting, far-infrared roasting, and oven roasting) on the quality of roasted large yellow croaker. The quality was evaluated using sensory evaluation, texture characteristics, color differences, moisture content, and volatile flavor substances. In this context, different roasting methods can affect the color, taste, and flavor of large yellow croaker fish, significantly improving the overall acceptance of roasted fish. The results showed that after 45% light wave and 55% microwave roasting, the elasticity of fish meat was maintained, the hardness of fish meat was reduced, the moisture content and distribution were changed, and the taste was the best. Far-infrared roasting and 45% light wave and 55% microwave roasting had a significant effect on the color of large yellow croaker samples and improved the sensory evaluation score. Forty-six volatile compounds were detected using gas chromatography-mass spectrometry. After roasting, the oxidation and Maillard reactions of lipids and proteins were increased, with the 45% light wave and 55% microwave roasting giving the highest variety of volatile flavor substance products.

Mesoscopic Simulation of Core-Shell Composite Powder Materials by Selective Laser Melting.

Mechanical ball milling is used to produce multi-materials for selective laser melting (SLM). However, since different powders have different particle size distributions and densities there is particle segregation in the powder bed, which affects the mechanical properties of the printed part. Core-shell composite powder materials are created and used in the SLM process to solve this issue. Core-shell composite powder materials selective laser melting (CS-SLM) has advanced recently, expanding the range of additive manufacturing applications. Heat storage effects and heat transfer hysteresis in the SLM process are made by the different thermophysical characteristics of the core and the shell material. Meanwhile, the presence of melt flow and migration of unmelted particles in the interaction between unmelted particles and melt complicates the CS-SLM molding process. It is still challenging to investigate the physical mechanisms of CS-SLM through direct experimental observation of the process. In this study, a mesoscopic melt-pool dynamics model for simulating the single-track CS-SLM process is developed. The melting characteristics of nickel-coated tungsten carbide composite powder (WC@Ni) were investigated. It is shown that the powder with a smaller particle size is more likely to form a melt pool, which increases the temperature in the area around it. The impact of process parameters on the size of the melt pool and the distribution of the reinforced particles in the melt pool was investigated. The size of the melt pool is significantly affected more by changes in laser power than by changes in scanning speed. The appropriate control of the laser power or scanning speed can prevent enhanced particle aggregation. This model is capable of simulating CS-SLM with any number of layers and enables a better understanding of the CS-SLM process.

Properties Evaluations of Topology Optimized Functionally Graded Lattice Structures Fabricated by Selective Laser Melting.

Owning to their lightweight characteristic and high performance, functionally graded lattice structures (FGLSs) show great potential in orthopedics, automotive industries and aerospace applications. Here, two types of uniform lattice structures (ULSs) with RD = 0.50 and 0.20, and two types of FGLSs with RD = 0.30-0.50 and RD = 0.20-0.40, were designed by topology optimization and fabricated by SLM technology. Subsequently, their surface morphology, compressive deformation behavior and energy absorption abilities were evaluated by use of the finite element method (FEM) and compression tests. From these results, both elastic modulus and yield strength of specimens decreased with the lowering of the RD value. ULSs had a uniform deformation behavior with bending and bulking of struts, while FGLSs presented a mixed deformation behavior of different layers. Additionally, the energy absorption capability (Wv) of specimens was proportional to the RD value. When the value of RD increased from 0.20 to 0.50, the Wv of specimens increased from 0.3657 to 1.7469 MJ/m3. Furthermore, mathematical models were established successfully to predict the mechanical properties of FGLSs with percentage deviations < 10%. This work provides a comprehensive understanding regarding how to design and manufacture FGLSs with the properties desired for satisfying the demand of different application scenarios.

The Influence of Heat Treatment Temperature on Tensile Properties of Metal-Bonded Diamond Composites Fabricated via Selective Laser Melting.

Selective Laser Melting (SLM) is an effective technology for fabricating new types of porous metal-bonded diamond tools with complex geometries. However, due to the high cooling rate and internal stresses during SLM fabrication, defects such as high porosities and interface gaps still need to be resolved before it can be considered for use in other applications. The influence of heat treatment temperature on internal characterization, interface microstructures, and tensile properties of AlSi7Mg-bonded diamond composites fabricated by SLM were investigated in this work. From experimental results, the porosities of HT-200, HT-350, and HT-500 specimens were 12.19%, 11.37%, and 11.14%, respectively, showing a slightly lower percentage than that of the No-HT specimen (13.34%). Here, HT represents "Heat Treatment". For No-HT specimens, an obvious un-bonding area can be seen in the interface between AlSi7Mg and diamond, whereas a relative closer interface can be observed for HT-500 specimens. After heat treatment, the elastic modulus of specimens showed a relative stable value (16.77 ± 2.79~18.23 ± 1.72 GPa), while the value of yield strength decreased from 97.24 ± 4.48 to 44.94 ± 7.06 MPa and the value of elongation increased from 1.98 ± 0.05 to 6.62 ± 0.51%. This difference can be attributed mainly to the disappearance of the solid-solution hardening effect due to the increase of Si content after heat treatment.

Research progress on applications of calcium derived from marine organisms.

Calcium is an important mineral that plays an integral role in human health, especially bone health. Marine biological calcium is an abundant resource that is generally accepted and has a complex active structure. This review evaluates research progress on marine biological calcium with regards to its sources, use of calcium supplements, calcium bioavailability, and novel applications of marine calcium. The potential for future development and the use of products incorporating marine biological calcium in biomedical research and the pharmaceutical, health care, and food industries are also reviewed. The goal of this review is to provide a comprehensive documentation on resource utilization and product development from marine organisms.

Discrete Element Simulation of the Effect of Roller-Spreading Parameters on Powder-Bed Density in Additive Manufacturing.

The powder-bed with uniform and high density that determined by the spreading process parameters is the key factor for fabricating high performance parts in Additive Manufacturing (AM) process. In this work, Discrete Element Method (DEM) was deployed in order to simulate Al2O3 ceramic powder roller-spreading. The effects of roller-spreading parameters include translational velocity Vs, roller's rotational speed ω, roller's diameter D, and powder layer thickness H on powder-bed density were analyzed. The results show that the increased translational velocity of roller leads to poor powder-bed density. However, the larger roller's diameter will improve powder-bed density. Moreover, the roller's rotational speed has little effect on powder-bed density. Layer thickness is the most significant influencing factor on powder-bed density. When layer thickness is 50 µm, most of particles are pushed out of the build platform forming a lot of voids. However, when the layer thickness is greater than 150 µm, the powder-bed becomes more uniform and denser. This work can provide a reliable basis for roller-spreading parameters optimization.

Anti-inflammation effects of fucosylated chondroitin sulphate from Acaudina molpadioides by altering gut microbiota in obese mice.

This study evaluated the possible prebiotic effects of dietary fucosylated chondroitin sulfate from Acaudina molpadioides (Am-CHS) on the modulation of the gut microbiota and the improvement in the risk factors for chronic inflammation in high fat diet-fed mice. The results showed that the Am-CHS treatment greatly modified the gut microbiota, including the decrease in Bacteroidetes, increase in Firmicutes, elevation in Lactobacillus (intestinal barrier protector) and short chain fatty acid (SCFA)-producing bacteria (Lactobacillus, Bifidobacterium, and Lachnospiraceae NK4A136 group), and reduction in the lipopolysaccharide (LPS) producer (Escherichia coli). This modulation inhibited inflammatory response, manifesting the decreases in circulating proinflammatory cytokines and their mRNA expression, and the increases in interleukin-10. Dietary Am-CHS caused reductions in serum and fecal LPS concentrations and inhibition of transcription of toll-like receptor 4 (TLR4) and its downstream proteins. In addition, there were increases in the portal levels of fecal SCFAs, which probably contributed to an increase in the adenosine monophosphate-activated protein kinase (AMPK) protein in Am-CHS-treated mice. These results suggest that modulation of gut microbiota by Am-CHS can improve chronic inflammation by reducing LPS levels and TLR4 signaling. Modulation also appears to increase the levels of fecal SCFAs, which activates AMPK and finally leads to inflammation resistance.

Mechanical properties tailoring of topology optimized and selective laser melting fabricated Ti6Al4V lattice structure.

This paper investigates the effect of porosity and unit cell size variation in topology optimized (TOP) and selective laser melting (SLM) fabricated Ti6Al4V lattice structure on the mechanical properties including compressive strength, failure mechanism and dynamic elastic modulus. Meanwhile, mathematical relations between mechanical properties and geometric parameters are obtained based on Gibson-Ashby model. The results show that both ultimate compressive strength (σ = 23∼498 MPa) and dynamic elastic modulus (E = 3.5∼55.47 GPa) of TOP lattice structures gradually decrease with the increase in porosity and unit cell size. The analysis combining experimental and numerical results indicates that TOP lattice structures are elastic-brittle porous material and have two failure mechanisms. The numerical predicted stress-strain curves are compared with the experimental ones. The numerical models incorporating the Johnson-Cook damage model could predict the slip direction of 45° failure band and ultimate compressive strength. Classical Gibson-Ashby model was used to predict the relation between relative density and mechanical properties of lattice structures. The exponential factors (n) of fitted models are obviously affected by unit cell size, which are determined by the number of unit cells in compressive test and SLM manufacturability in dynamic elastic modulus test. A 3D Modulus-Density-Unit Cell Size model is innovatively proposed, which can provide theoretical basis of tailoring orthopedic implant filled with functional gradient TOP lattice structures.

Study on Topology Optimization Design, Manufacturability, and Performance Evaluation of Ti-6Al-4V Porous Structures Fabricated by Selective Laser Melting (SLM).

The combination of topology optimization (TOP) and selective laser melting (SLM) provides the possibility of fabricating the complex, lightweight and high performance geometries overcoming the traditional manufacturing "bottleneck". This paper evaluates the biomechanical properties of porous structures with porosity from 40% to 80% and unit cell size from 2 to 8 mm, which are designed by TOP and manufactured by SLM. During manufacturability exploration, three typical structures including spiral structure, arched bridge structure and structures with thin walls and small holes are abstracted and investigated, analyzing their manufacturing limits and forming reason. The property tests show that dynamic elastic modulus and compressive strength of porous structures decreases with increases of porosity (constant unit cell size) or unit cell size (constant porosity). Based on the Gibson-Ashby model, three failure models are proposed to describe their compressive behavior, and the structural parameter λ is used to evaluate the stability of the porous structure. Finally, a numerical model for the correlation between porous structural parameters (unit cell size and porosity) and elastic modulus is established, which provides a theoretical reference for matching the elastic modulus of human bones from different age, gender and skeletal sites during innovative medical implant design and manufacturing.