Mid-infrared tunable absorber based on an Ag/SiO2/VO2/Ag/VO2 multilayer structure and its molecular sensing capability.

We present a design of middle-infrared modulation absorbers based on vanadium dioxide (VO2). By using the electron beam evaporation technique, the Ag/SiO2/VO2/Ag/VO2 multilayer structure can achieve double band strong absorption in the mid-infrared, and dynamically adjust the absorption performance through VO2. The simulation results demonstrate a remarkable absorption rate of 91.8% and 98.9% at 9.09 µm and 10.25 µm, respectively. The high absorption is elucidated by analyzing the field strength distribution in each layer. Meanwhile, based on the phase change characteristics of VO2, the absorber has exceptional thermal regulation, with a remarkable 78% heat regulation range in the mid-infrared band. The size altering of the absorbing layer is effective in enhancing and optimizing the structure's absorption performance. The structure is used to characterize probe molecules of CV and R6 G by mid-infrared spectroscopy, which illustrates an impressive limit of detection (LOD) of 10-7 M for both substances. These results provide valuable insights for designing future high-performance tunable optical devices.

Highly sensitive AuNSs@AgNR SERS substrates for rapid determination of aromatic amines.

The leakage of aromatic amines will pose a great threat to human health and the ecological environment. Therefore, there is an urgent need to achieve rapid and high-sensitivity detection of such substances. In this study, a simple surface-enhanced Raman scattering (SERS) method based on gold nanostars-modified silver nanorods (AuNSs@AgNRs) was established for the detection of benzidine and 4-aminobiphenyl (4-ABP). The enhancement factors of the substrate towards rhodamine 6G (R6G) and crystal violet (CV) were 4.67 × 108 and 1.11 × 108, respectively. Combined with density functional theory (DFT), the AuNSs@AgNR substrate achieved the rapid detection of benzidine and 4-ABP and obtained low detection limits (LODbenzidine = 7.09 × 10-9 M; LOD4-ABP = 1.20 × 10-9 M). Furthermore, the AuNSs@AgNR substrate can realize the high-sensitivity detection of benzidine and 4-ABP in the spiked river water samples within 3 min, which means that the AuNSs@AgNR-based SERS method can be used as a portable platform to realize the on-site rapid detection of environmental pollutants.

Nutrient dynamics and microbial community response in macrophyte-dominated lakes: Implications for improved restoration strategies.

Although lakes dominated by macrophytes are conducive to ecological balance, this balance is easily disrupted by excessive nutrients flowing into the lake. However, knowledge of whether excessive nutrients lead to different microbial environmental vulnerabilities in the lake sediment between macrophyte-dominated areas and macrophyte-free areas is a prerequisite for the implementation of targeted protection measures. In this study, we investigated bacterial communities in sediments using high-throughput sequencing of 16S rRNA genes. Our results showed that the sources of total nitrogen (TN) and organic matter (OM) were related to the macrophytes. The structure, drivers, and interspecific associations of bacterial community, which were more susceptible to increased changes in TN and OM, differed significantly between macrophyte-dominated areas and macrophyte-free areas. More precisely, the lake edge, where was occupied by macrophytes, had a higher proportion of deterministic phylogenetic turnover (88.89%) than other sites, as well as a wider ecological niche and a tighter network structure. Further, as the difference in TN increased, the main assembly processes in surface sediments changed from stochastic to deterministic. However, the majority of phyla from the lake edge showed a greater correlation with excessive nutrients, and the selection of the community by excessive nutrients was more obvious at the edge of the lake. In addition, our results demonstrated that the stability of the bacterial community in macrophyte-free areas is greater than in macrophyte-dominated areas, while an excessively high deterministic process ratio and nutrient (TN and OM) concentration significantly reduced bacterial community stability at macrophyte-dominated areas. Taken together, these results provide a better understanding of the effects of excessive nutrients derived from macrophytes on bacterial community patterns, and highlight the importance of avoiding the accumulation of TN and OM in macrophyte-dominated areas to enhance the sustainability of the ecosystem after restoration of lakes with macrophytes.

Visible transparent mid-infrared broadband absorbers based on gradient refractive indexes and multi-size cavity resonances.

We proposed a multi-layered nanorod structure with the same tilt angle and different diameters, which has high visible transmittance and strong 3-5 µm absorption based on the principles of the gradient of the refractive index and the multi-size cavity resonances. The indium tin oxide (ITO) was selected as the target material to fabricate the structure by using a glancing angle deposition method. The experimental results show that when the deposition angle θ is 80°, swing deposition is successively done with the rotation angle φ of ±8°, ± 5°, ± 3°, and 0° on the surface of the substrate, and the quartz crystal microbalance thicknesses of ITO nanorods are 220 nm for each deposition, the average transmittance is 80.5% in the range of 400-800 nm and the integrated absorption is 86% in the 3-5 µm band. Such a simple, low-cost, and easy-to-fabricate device has potential applications in window stealth materials and other related fields.

3-5 µm mid-infrared broadband absorbers composed of layered ITO nanorod arrays with high visible light transmittance.

A mid-infrared broadband absorber with high visible light transmittance is proposed in this paper. The absorber is composed of layered ITO nanorod arrays with increasing angles fabricated by oblique angle deposition technique. The experimental results show that the average transmittance of the absorber reaches 80% in the 400-800 nm band and the integrated absorption reaches 82.9% in the 3-5 µm band, when the QCM thickness of the first layer of film is 100 nm and the deposition angle θ is 10°, the QCM heights of the second to fifth layers of nanorods are all 330 nm, and their deposition angles are 55°, 68°, 80°, and 87°, respectively. The high transmittance in the visible band is attributed to the gradient of the refractive index. The broadband absorption in the mid-infrared band results from different resonances in the empty cavities with different sizes. Such a simple and large-area absorber has potential applications in window materials and infrared cloaking.

ITO/Si/ITO semi-cone-shell chiral complexes on silicon nanocones with broadband circular dichroism in the mid-infrared wavelength.

This paper proposed ITO/Si/ITO semi-cone-shell chiral complexes on silicon nanocones with broadband CD in the mid-infrared band. The experimental results show that when the deposition angle θ = 45°, the first ITO deposition of ta = 100 nm, the second Si deposition of tb = 200 nm with the azimuth angle unchanged, and the third ITO deposition of tc = 200 nm after rotating the azimuth angle of 60°, the prepared chiral structure has a broadband CD response in the mid-infrared band of 2.5-4 µm. The broadband CD effect is produced by the internal resonance of the three-dimensional open cavity. The cone structure can be regarded as a plurality of planar open resonant rings with different diameters, and these rings resonate at different wavelengths. The experimental results also show that the proposed chiral ITO structure exhibits a better broadband CD response than that of the structure composed of traditional metal Ag. Such a chiral structure provides a new method for the design of CD devices in the mid-infrared band.

Super-resolution scanning imaging based on metal-dielectric composite metamaterials.

We propose super-resolution scanning imaging by using a metamaterial composed of a silver-silicon dioxide composite covered by a layer of chromium containing one slit and a silicon dioxide substrate. By simulating a distribution of energy flow in the metamaterial for an H-polarized wave, we find that the output beam exhibits focusing accompanied with good directional radiation, which is able to be designed as a super-resolution scanning probe. We also demonstrate numerically super-resolution imaging by scanning our designed metamaterial over a sub-wavelength object.

Large-area mid-infrared broadband absorbers based on spiral ITO resulting from the combination of two different broadening absorption methods.

A large-area mid-infrared broadband absorber is proposed in this paper. The absorber is a spiral ITO structure grown on a hexagonal lattice arrangement of silicon nanopillars by using a glancing angle deposition method. The experimental results show that when the heights of the silicon nanopillars are 1.7 µm and the number of rotation depositions is n = 5, that is, the rotation angle is 150 degrees, the absorber absorbs more than 81% of electromagnetic waves in the 2.5-6 µm spectral range. In the atmospheric window of 3-5 µm, the integral absorption reaches 96%. The experimental results also show that the absorbing ability of the ITO structure in the mid-infrared atmospheric window is significantly stronger than that of the structure composed of silver under the same preparation conditions. The main reasons for the broadband absorption are that the spiral ITO structure has resonant absorption of electromagnetic waves with different wavelengths in the empty cavity regions with different sizes, and ITO has longer penetration depths than noble metals in the mid-infrared band, which brings about stronger broadband absorption. The combination of the two leads to a broadening of the total absorption spectrum. The higher heights of the silicon nanopillars enhance absorption further. Additionally, the loose spiral ITO distributions indicate lower mean plasma concentration and then increase penetration depths further, resulting in stronger light absorption. Such a large-area mid-infrared absorption structure with a simple preparation method has potential applications in mid-infrared cloaking and sensing.

Preparation of a silver nano-tripod structure by a tilting angle deposition technique and its SERS application.

A silver nano-tripod (AgNT) structure with a high-density "hot spots" distribution was fabricated by a tilting angle deposition technique. The electric field simulation distribution showed that the electric field enhancement of the AgNT structures is optimal when the tilting angle is 72°. Such AgNT substrates were successfully obtained experimentally when the included angle between the silver vapor and the normal of the sample platform was set to 86°. R6G and CV were used as probe molecules to investigate the SERS activity of AgNT, which revealed that the detection limits of AgNT for R6G and CV were 2.24×10-8 M and 4.01×10-8 M, the relative standard deviations (RSDs) were 4.26% and 4.44%, and the enhancement factors (EFs) were 9.58×106 and 1.16×107, respectively. The AgNT substrates with simple preparation and high distribution density of "hot spots" illustrate a good application prospect in environmental monitoring.

Transcriptomics and Metabolomics Revealed the Biological Response of Chlorella pyrenoidesa to Single and Repeated Exposures of AgNPs at Different Concentrations.

Increased release of engineered nanoparticles (ENPs) from widely used commercial products has threatened environmental health and safety, particularly the repeated exposures to ENPs with relatively low concentration. Herein, we studied the response of Chlorella pyrenoidesa (C. pyrenoidesa) to single and repeated exposures to silver nanoparticles (AgNPs). Repeated exposures to AgNPs promoted chlorophyll a and carotenoid production, and increased silver accumulation, thus enhancing the risk of AgNPs entering the food chain. Notably, the extracellular polymeric substances (EPS) content of the 1-AgNPs and 3-AgNPs groups were dramatically increased by 119.1% and 151.5%, respectively. We found that C. pyrenoidesa cells exposed to AgNPs had several significant alterations in metabolic process and cellular transcription. Most of the genes and metabolites are altered in a dose-dependent manner. Compared with the control group, single exposure had more differential genes and metabolites than repeated exposures. 562, 1341, 4014, 227, 483, and 2409 unigenes were differentially expressed by 1-0.5-AgNPs, 1-5-AgNPs, 1-10-AgNPs, 3-0.5-AgNPs, 3-5-AgNPs, and 3-10-AgNPs treatment groups compared with the control. Metabolomic analyses revealed that AgNPs altered the levels of sugars and amino acids, suggesting that AgNPs reprogrammed carbon/nitrogen metabolism. The changes of genes related to carbohydrate and amino acid metabolism, such as citrate synthase (CS), isocitrate dehydrogenase (IDH1), and malate dehydrogenase (MDH), further supported these results. These findings elucidated the mechanism of biological responses to repeated exposures to AgNPs, providing a new perspective on the risk assessment of nanomaterials.

Deciphering the toxic effects of metals in gold mining area: Microbial community tolerance mechanism and change of antibiotic resistance genes.

Mine tailing dumps represent significant threats to ecological environments due to the presence of toxic substances. The present work investigated the relationship among microbial activity, the community, antibiotic resistance genes (ARGs) and trace metals in soil surrounding gold mine tailings. Using microbial metabolic activity and high-throughput sequencing analysis, we found the trace metals Cd and Hg could be main factors influencing the microbial community. According to bacterial co-occurrence pattern analysis, the effects of total cadmium and total mercury on bacterial diversity are potentially mediated by influencing bacteria community in the keystone module II. Additionally, most of metal-resistant bacteria belong to Actinobacteria and Proteobacteria, and the metal tolerance suggested to be linked with various functions including replication, recombination and repair, as well as inorganic ion transport and metabolism based on PICRUSt2 analysis. We also found that metals generated by mining activity may trigger the co-selection of antibiotic resistance in the phyla Actinobacteria and Proteobacteria due to co-resistance or cross resistance. Additionally, PLS-PM analysis revealed that metals could indirectly affect ARGs by influencing bacterial diversity in gold mining areas.

Improving the sensitivity of guided-mode resonance sensors under oblique incidence condition.

We present an investigation on the use of oblique incidence condition to enhance the sensitivity of guided-mode resonance (GMR) sensors. By adjusting the incident angle, the enhancement of GMR sensitivity in non-subwavelength regime can be obtained. The measured results show that the bulk sensitivity of the GMR sensors with period of 809 nm climbs to 177% or 292% as the incident angle increases from 15° to 25° or 35°, respectively. The same trend is also obtained for the grating period of 994 nm. Simulations based on the rigorous coupled wave analysis (RCWA) method were performed, and we also built a new slab waveguide model to describe the relationship between bulk sensitivity and the incident angle. The present investigation demonstrates a new method for enhancing the bulk sensitivity of GMR sensor. Moreover, simple fabrication techniques can be utilized since a large grating period was used.

L-shaped ITO structures fabricated by oblique angle deposition technique for mid-infrared circular dichroism.

This paper proposes a mid-infrared chiral structure, which consists of L-shaped indium tin oxide (ITO) films formed on self-assembled monolayer polystyrene microspheres in two orthogonal directions by oblique angle deposition technique. Experimental results demonstrate that the structure exhibit circular dichroism (CD) responses in the range of 2.5 - 4 µm. As the thickness difference of the ITO films in the two orthogonal directions increases, the CD response enhances. The reason is that the ITO films produce cross dipoles and their bigger differences in thickness bring to bigger phase differences in optical chirality. The experimental results also demonstrate that the CD signals are evidently stronger than those of the structure consisting of silver in the mid-infrared band. This work provides a new idea for the fabrication of mid-infrared chiral structures, which have potential applications in the polarization state control of mid-infrared lasers.

Non-homogeneous composite GMR structure to realize increased filtering range.

A non-homogeneous composite guided-mode resonant (GMR) filter structure is proposed that avoids the multi-mode resonance effect and increases resonant wavelength tuning range. The composite filter structure is engineered using a combination of a varied-line-spacing (VLS) grating layer with a wedge-shaped waveguide layer. The grating is fabricated by holographic interference lithography (IL), while the wedge-shaped layer is fabricated using masked ion beam etching (MIBE) technology. The resonant wavelength has been observed to vary as a function of the spatial position on the structure. In the fabricated structure, over a length of 30 mm, the grating period increment is measured to be 149.2 nm, whereas the increment of the waveguide film thickness is approximately 100 nm. Experimental results show that a primary reflectance peak is achieved spanning a wavelength range of 805.8-1119.0 nm. The device is designed using the rigorous coupled-wave analysis (RCWA) method, and the proposed device is toward the practical application of GMR filters.

Large-area broadband optical absorber fabricated by shadowing sphere lithography.

We report a large-area broadband optical absorber consisting of Ag/SiO2 stacked plasmonic layers fabricated on a self-assembly polystyrene sphere monolayer using the glancing angle deposition. Such an absorber can absorb more than 90% of light in the spectral range of 350 - 850 nm when the polystyrene spheres have a diameter of 750 nm. The broadband absorption is due to the overlap of localized plasmonic resonance wavelengths resulting from different patchy sizes and shapes of Ag coating on polystyrene spheres. Such a simple, flexible and large-area absorber has potential applications in light cloaking and energy conversion.

Growth and optical properties of Ag-Ti composite nanorods based on oblique angle co-deposition technique.

Ag-Ti composite nanorod structures with various Ag compositions were fabricated by the oblique angle co-deposition technique, and their optical transmission spectra are tuned by composition ratios of Ag and Ti, polarization directions, and deposition angles. Such tunable optical properties have potential applications in optoelectronics. Specially, for the Ag80 composite nanorod structures, there exists a wavelength, where it is isotropic. We also show that the transmission spectra of the Ag80 composite nanorod structure for the deposition angle of 87.5° are greater than 90%, while the transmission spectra for the 75° deposition angle are lower than 20%. Utilizing such a property, high or low transmission lenses can be designed.

Switchable reflection/transmission utilizing polarization on a plasmonic structure consisting of self-assembly polystyrene spheres with silver patches.

We report a plasmonic structure for switchable reflection and transmission by polarization. The structure is composed of a hexagonal-packed polystyrene sphere array with silver patches on them. Simulations and experiments demonstrated that the conversions between reflected beams and transmitted ones can be performed when the polarization directions of incident beams vary from 0° to 90°. A switchable reflection and transmission at a given wavelength can be obtained, as long as sizes of PS spheres and azimuthal angles are properly chosen. Such a patchy plasmonic structure serving as a switch between reflection and transmission have potential applications in photoelectric control devices.

Subwavelength dielectric nanorod chains for energy transfer in the visible range.

We report a new type of energy transfer device, formed by a dielectric nanorod array embedded in a silver slab. Such dielectric chain structures allow surface plasmon wave guiding with large propagation length and highly suppressed crosstalk between adjacent transmission channels. The simulation results show that our proposed design can be used to enhance the energy transfer along the waveguide-like dielectric nanorod chains via coupled plasmons, where the energy spreading is effectively suppressed, and superior imaging properties in terms of resolution and energy transfer distance can be achieved.

Polarization-independent broadband plasmonic absorber based on a silicon-nanowire array decorated by gold nanoparticles at the optical regime.

We present a design for a plasmonic absorber that is composed of a hexagonal-packed silicon nanowires (SiNWs) array with gold nanoparticles (AuNPs) decoration. Simulations and experiments demonstrated that the proposed absorber achieves a broadband absorption. Its bandwidth over an absorption of 80% ranges from 400 nm to 1000 nm at 0 degree to 30 degrees incidence. It was also demonstrated that the plasmonic absorber is polarization-insensitive. Analyzing the field distributions in the structure, we find that the wideband absorption is ascribed to the formation of cavity modes in the SiNWs and surface plasmon polaritons on the AuNPs. Such a designed plasmonic structure with high-efficiency absorption can be served as a good optical absorber.

Actively tunable Fano resonances based on colossal magneto-resistant metamaterials.

In this Letter, a periodic structure in which each unit cell consists of one manganese oxide (La(0.7)Ca(0.3)MnO(3)) strip and two gold strips is designed. By simulating the electromagnetic responses of the structure, we confirm that Fano resonances can be actively controlled in the infrared region by modulating the intensity of the external magnetic field applied to the structure. This is due to the colossal magneto-resistance of the La(0.7)Ca(0.3)MnO(3) material. Furthermore, a transmission phase can also be effectively tuned. The phase has a shift of ΔΦ=1.05 rad at a frequency of 130 THz when the intensity of the external magnetic field varies from 5083 to 5193 kA/m. Such a tunable method has potential applications in controllable photoelectric elements.