RESUMEN
Fiber-shaped conductors with high electrical conductivity, stretchability, and durability have attracted increasing attention due to their potential for integration into arbitrary wearable forms. However, these fiber conductors still suffer from low reliability and short life span, particularly in harsh environments. Herein, a conductive, environment-tolerant, stretchable, and healable fiber conductor (CESH), which consists of a self-healable and stretchable organohydrogel fiber core, a conductive and buckled silver nanowire coating, and a self-healable and waterproof protective sheath, is reported. Such a multilayer core-sheath design not only offers high stretchability (≈2400%), high electrical conductivity (1.0 × 106 S m-1 ), outstanding self-healing ability and durability, but also possesses unprecedented tolerance in harsh environments including wide working temperature (-60-20 °C), arid (≈10 % RH (RH: room humidity)), and underwater conditions. As proof-of-concept demonstrations, CESHs are integrated into various wearable formats as interconnectors to steadily perform the electric function under different mechanical deformations and harsh conditions. Such a new type of multifunctional fiber conductors can bridge the gap in stretchable and self-healing fiber technologies by providing ultrastable electrical conductance and excellent environmental tolerance, which can greatly expand the range of applications for fiber conductors.
RESUMEN
The attachment efficiency of biofouling organisms on solid surfaces depends on a variety of factors, including fouler species, nutrition abundance, flow rate, surface morphology and the stiffness of the solid to which attachment is to be made. So far, extensive research has been carried out to investigate the effects of these factors on the attachment of various fouling species. However, the results obtained are species-dependent and scattered. There is no universal rule that can be applied to predict the attachment efficiency of different species. To solve this problem, the authors carried out meta-analysis of the effects of ten selected factors on attachment efficiency, resulting in a universal correlation between the attachment density and the selected factors, which was validated by attachment tests of tubeworms on PDMS surfaces. The results provide a practical approach to predicting the attachment efficiency of fouling organisms and should be of great value in the design of anti-biofouling materials.
Asunto(s)
Organismos Acuáticos/fisiología , Incrustaciones Biológicas , Dimetilpolisiloxanos/química , Modelos Biológicos , Poliquetos/fisiología , Propiedades de Superficie , Animales , Fenómenos FisiológicosRESUMEN
Ocean uptake of anthropogenic CO2 causes ocean acidification (OA), which not only decreases the calcification rate, but also impairs the formation of calcareous shells or tubes in marine invertebrates such as the dominant biofouling tubeworm species, Hydroides elegans. This study examined the ability of tubeworms to resume normal tube calcification when returned to ambient pH 8.1 from a projected near-future OA level of pH 7.8. Tubeworms produced structurally impaired and mechanically weaker calcareous tubes at pH 7.8 compared to at pH 8.1, but were able to recover when the pH was restored to ambient levels. This suggests that tubeworms can physiologically recover from the impacts of OA on tube calcification, composition, density, hardness and stiffness when returned to optimal conditions. These results help understanding of the progression of biofouling communities dominated by tubeworms in future oceans with low pH induced by OA.
Asunto(s)
Organismos Acuáticos/efectos de los fármacos , Incrustaciones Biológicas , Calcificación Fisiológica/efectos de los fármacos , Poliquetos/efectos de los fármacos , Agua de Mar/química , Ácidos , Exoesqueleto/química , Exoesqueleto/efectos de los fármacos , Animales , Organismos Acuáticos/fisiología , Incrustaciones Biológicas/prevención & control , Dióxido de Carbono/toxicidad , Predicción , Concentración de Iones de Hidrógeno , Océanos y Mares , Poliquetos/fisiología , Contaminantes Químicos del Agua/toxicidadRESUMEN
The sodium-ion battery is a promising battery technology owing to its low price and high abundance of sodium. However, the sluggish kinetics of sodium ion makes it hard to achieve high-rate performance, therefore impairing the power density. In this work, a fiber-in-tube Co9 S8 -carbon(C)/Co9 S8 is designed with fast sodiation kinetics. The experimental and simulation analysis show that the dominating capacitance mechanism for the high Na-ion storage performance is due to abundant grain boundaries, three exposed layer interfaces, and carbon wiring in the design. As a result, the fiber-in-tube hybrid anode shows a high specific capacity of 616â mAh g-1 after 150 cycles at 0.5â A g-1 . At 1â A g-1 , a capacity of ca. 451â mAh g-1 can be achieved after 500 cycles. More importantly, a high energy density of 779â Whâ kg-1 and power density of 7793â W kg-1 can be obtained simultaneously.
RESUMEN
In this paper, the in-plane torsional properties of two dimensional nanomaterials are revealed to be tunable by surface functionalization using molecular dynamics simulations. The torsional strengths of both graphene and graphyne under circular shearing are found to first decrease and then increase anomalously with the increase of the hydrogenation ratio. The minimum strength of such U-shaped strength evolution appears at different hydrogenation ratios H for graphene (H = 50%) and graphyne (H = 70%), demonstrating a correlation between hydrogenation and the unit lattices of 2D nanomaterials. By studying the torsional characteristics of a graphene annulus with varying outer-to-inner boundary radius ratios, the anomalous increase of torsional strength at a high hydrogenation ratio is revealed to be the result of wrinkling deformation as well as chemical bond hybridization. Further analyses of the local stress distribution are carried out for understanding the mechanism of surface hydrogenation tuned in-plane torsional strength of graphene and graphyne. Torsional strength of the graphene annulus with an elliptical outer boundary also shows a U-shaped evolution with hydrogenation ratio, while the shape effect of the graphene annulus can smooth the change of the torsional characteristics with hydrogenation. Our results provide novel insights into the development of 2D nanomaterial-based annular devices.
RESUMEN
Development of antifouling strategies requires knowledge of how fouling organisms would respond to climate change associated environmental stressors. Here, a calcareous tube built by the tubeworm, Hydroides elegans, was used as an example to evaluate the individual and interactive effects of ocean acidification (OA), warming and reduced salinity on the mechanical properties of a tube. Tubeworms produce a mechanically weaker tube with less resistance to simulated predator attack under OA (pH 7.8). Warming (29°C) increased tube volume, tube mineral density and the tube's resistance to a simulated predatory attack. A weakening effect by OA did not make the removal of tubeworms easier except for the earliest stage, in which warming had the least effect. Reduced salinity (27 psu) did not affect tubes. This study showed that both mechanical analysis and computational modeling can be integrated with biofouling research to provide insights into how fouling communities might develop in future ocean conditions.
Asunto(s)
Incrustaciones Biológicas/prevención & control , Calentamiento Global , Concentración de Iones de Hidrógeno , Poliquetos , Agua de Mar , Temperatura , Animales , Análisis de Elementos Finitos , Minerales , Océanos y Mares , Poliquetos/crecimiento & desarrollo , Poliquetos/fisiología , Salinidad , Agua de Mar/análisis , Agua de Mar/química , Microtomografía por Rayos X/métodosRESUMEN
Many benthic marine organisms produce calcium carbonate (CaCO3) structures for mechanical protection through a biologically controlled calcification process. However, the oceans are becoming unfavorable for calcification because of the stress associated with ocean acidification (OA) and associated chemical changes such as declining saturation state of CaCO3 and decreasing seawater pH. This work studies the impacts of OA-driven decreased pH on the calcareous tubes produced by the serpulid tubeworm Hydroides elegans. Tubes grown under control and OA experimental conditions were measured for structural and mechanical properties, and their mechanical properties were further interpreted using finite element analysis (FEA). The near-future predicted pH value of 7.8 altered tube ultrastructure, volume, and density and decreased the mean tube hardness and elasticity by â¼ 80 and â¼ 70%, respectively. The crushing force required for breaking the tube was reduced by 64%. The FEA results demonstrated how a simulated predator attack may affect the structure with different structural and mechanical properties and consequently shift the stress development and distribution in the tubes, causing a more concentrated stress distribution and therefore leading to a lower ability to withstand attacks.
Asunto(s)
Fenómenos Biomecánicos , Carbonato de Calcio/metabolismo , Dióxido de Carbono/metabolismo , Poliquetos/fisiología , Poliquetos/ultraestructura , Agua de Mar/química , Animales , Calcificación Fisiológica , Carbonato de Calcio/química , Concentración de Iones de Hidrógeno , Microscopía Electrónica de Rastreo , Poliquetos/química , Microtomografía por Rayos XRESUMEN
Biomaterials in nature exhibit delicate structures that are greatly beyond the capability of the current manufacturing techniques. Duplicating these structures and applying them in engineering may help enhance the performance of traditional functional materials and structures. Inspired by gecko's hierarchical micro- and nano-fibrillar structures for adhesion, in this work we fabricated micro-pillars and tubes by adopting the tubular dentine of black carp fish teeth as molding template. The adhesion performances of the fabricated micro-pillars and tubes were characterized and compared. It was found that the pull-off force of a single pillar was about twice of that of the tube with comparable size. Such unexpected discrepancy in adhesion was analyzed based on the contact mechanics theories.
Asunto(s)
Adhesivos/química , Dentina/química , Nanotubos/química , Animales , Biomimética , CarpasRESUMEN
Traditional anti-impact armors and shields are normally made of stiff and hard materials and therefore deficient in flexibility. This greatly limits their applications in protecting objects with complex geometries or significant deformability. Flexible armors can be developed with the application of hard platelets and soft materials, but the lower rigidity of the flexible armors renders them incapable of providing sufficient resistance against impact attacks. To address the inherent conflict between flexibility and impact resistance in traditional armors, here, a composite is developed by hybridizing a shear-stiffening gel as the matrix and chemically-strengthened ultrathin glass sheets (CSGS) as the reinforcement. The resulting laminate, termed PCCL, exhibits both high flexibility and high impact resistance. Specifically, at low strain rates, the high ductility of the gel combined with the high flexural strength of the CSGS enables the PCCL to undergo considerable deformation; at high strain rates, on the other hand, the shear stiffening behavior of the gel matrix endows the PCCL with excellent impact resistance manifested by its high performance in energy absorption and high rigidity. With the combination of high flexibility and high impact resistance, the PCCL is demonstrated to be an ideal armor for protecting curved vulnerable objects from impact attacks.
RESUMEN
Biological exoskeletons, in particular those with unusually robust and multifunctional properties, hold enormous potential for the development of improved load-bearing and protective engineering materials. Here, we report new materials and mechanical design principles of the iron-plated multilayered structure of the natural armor of Crysomallon squamiferum, a recently discovered gastropod mollusc from the Kairei Indian hydrothermal vent field, which is unlike any other known natural or synthetic engineered armor. We have determined through nanoscale experiments and computational simulations of a predatory attack that the specific combination of different materials, microstructures, interfacial geometries, gradation, and layering are advantageous for penetration resistance, energy dissipation, mitigation of fracture and crack arrest, reduction of back deflections, and resistance to bending and tensile loads. The structure-property-performance relationships described are expected to be of technological interest for a variety of civilian and defense applications.
Asunto(s)
Gastrópodos/fisiología , Animales , Simulación por Computador , Análisis de Elementos Finitos , Gastrópodos/anatomía & histología , Biología MarinaRESUMEN
Flexible pressure sensors are indispensable components in various applications such as intelligent robots and wearable devices, whereas developing flexible pressure sensors with both high sensitivity and wide linear range remains a great challenge. Here, we present an elegant strategy to address this challenge by taking advantage of a pyramidal carbon foam array as the sensing layer and an elastomer spacer as the stiffness regulator, realizing an unprecedentedly high sensitivity of 24.6 kPa-1 and an ultra-wide linear range of 1.4 MPa together. Such a wide range of linearity is attributed to the synergy between the nonlinear piezoresistivity of the sensing layer and the nonlinear elasticity of the stiffness regulator. The great application potential of our sensor in robotic manipulation, healthcare monitoring, and human-machine interface is demonstrated. Our design strategy can be extended to the other types of flexible sensors calling for both high sensitivity and wide-range linearity, facilitating the development of high-performance flexible pressure sensors for intelligent robotics and wearable devices.
RESUMEN
Surface topography has been demonstrated as an effective nonchemical strategy for controlling the fouling resistance of a surface, but its impact on optical transparency remains a barrier to the application of this strategy in optical materials. To reconcile the conflicting effects of surface topography on optical transparency and fouling resistance, here we study the optical properties and antifouling performance of nanowrinkled surfaces inspired by the corneal surface of zebrafish (Danio rerio). Experimental and numerical analyses demonstrate that a good compromise between optical transparency and antifouling efficacy can be achieved by wavy nanowrinkles with a characteristic wavelength of 800 nm and an amplitude of 100 nm. In particular, the optimal wrinkled surface under study can reduce biofouling by up to 96% in a single-species (Pseudoalteromonas sp.) bacterial settlement assay in the laboratory and 89% in a field test while keeping the total transmittance above 0.98 and haze below 0.04 underwater. Moreover, our nanowrinkled surface also exhibits excellent resistance against contamination by inorganic particles. This work provides a nonchemical strategy for achieving the coexistence of optical transparency and fouling resistance on one single material, which implies significant application potential in various optical devices and systems, such as antibacterial contact lenses and self-cleaning solar panels.
Asunto(s)
Incrustaciones Biológicas , Pseudoalteromonas , Animales , Antibacterianos/farmacología , Incrustaciones Biológicas/prevención & control , Córnea , Propiedades de Superficie , Pez CebraRESUMEN
Among kinds of flexible tactile sensors, piezoelectric tactile sensor has the advantage of fast response for dynamic force detection. However, it suffers from low sensitivity at high-frequency dynamic stimuli. Here, inspired by finger structure-rigid skeleton embedded in muscle, we report a piezoelectric tactile sensor using a rigid-soft hybrid force-transmission-layer in combination with a soft bottom substrate, which not only greatly enhances the force transmission, but also triggers a significantly magnified effect in d31 working mode of the piezoelectric sensory layer, instead of conventional d33 mode. Experiments show that this sensor exhibits a super-high sensitivity of 346.5 pC N-1 (@ 30 Hz), wide bandwidth of 5-600 Hz and a linear force detection range of 0.009-4.3 N, which is ~17 times the theoretical sensitivity of d33 mode. Furthermore, the sensor is able to detect multiple force directions with high reliability, and shows great potential in robotic dynamic tactile sensing.
Asunto(s)
Robótica , Tacto , Dedos , Fenómenos Mecánicos , Reproducibilidad de los ResultadosRESUMEN
Biofouling refers to the adverse attachment and colonization of fouling organisms, including macromolecules, bacteria, and sessile invertebrates, on the surfaces of materials submerged in aquatic environments. Almost all structures working in watery surroundings, from marine infrastructures to healthcare facilities, are affected by this sticky problem, resulting in massive direct and indirect economic loss and enormous cost every year in protective maintenance and remedial cleaning. Traditional approaches to preventing marine biofouling primarily rely on the application of biocide-contained paints, which certainly impose adverse effects on the ocean environment and marine ecology. Biomimicry offers an efficient shortcut to developing environmentally friendly antifouling techniques and has yielded encouraging and promising results. The antifouling strategies learned from nature can be broadly classified into two categories according to the nature of the cues applied for biofouling control. One is the chemical antifouling techniques, which are dedicated to extracting the effective antifoulant compounds from marine organisms and synthesizing chemicals mimicking natural antifoulants. In contrast, the physical biomimetic (BM) antifouling practices focus on the emulation and optimization of the physical cues such as micro and nanoscale surface topographies learned from naturally occurring surfaces for better antifouling efficacy. In this review, a synopsis of the techniques for manufacturing the BM and bioinspired (BI) antifouling surface topographies is introduced, followed by the bioassay to assess the antifouling performance of the structured surfaces. Then, the BM and BI surface topographies that were reported to possess enhanced antifouling competence are introduced, followed by a summary of theoretical modeling. The whole paper is concluded by summarizing the studies' deficiencies so far and outlooking the research directions in the future.
Asunto(s)
Incrustaciones Biológicas , Organismos Acuáticos , Incrustaciones Biológicas/prevención & control , Biomimética , Propiedades de SuperficieRESUMEN
There is ever-increasing interest yet grand challenge in developing programmable untethered soft robotics. Here we address this challenge by applying the asymmetric elastoplasticity of stacked graphene assembly (SGA) under tension and compression. We transfer the SGA onto a polyethylene (PE) film, the resulting SGA/PE bilayer exhibits swift morphing behavior in response to the variation of the surrounding temperature. With the applications of patterned SGA and/or localized tempering pretreatment, the initial configurations of such thermal-induced morphing systems can also be programmed as needed, resulting in diverse actuation systems with sophisticated three-dimensional structures. More importantly, unlike the normal bilayer actuators, our SGA/PE bilayer, after a constrained tempering process, will spontaneously curl into a roll, which can achieve rolling locomotion under infrared lighting, yielding an untethered light-driven motor. The asymmetric elastoplasticity of SGA endows the SGA-based bi-materials with great application promise in developing untethered soft robotics with high configurational programmability.
RESUMEN
Polymer coatings with a combined competence of strong bonding to diverse substrates, broad liquid repellency, and readily damage healing are in substantial demand in a range of applications. In this work, we develop damage-healable, oil-repellent supramolecular silicone (DOSS) coatings to harvest abovementioned properties by molecular engineering siloxane oligomers that can self-assemble onto coated substrates via multivalent hydrogen bonding. In addition to the readily damage-healing properties provided by reversible association/dissociation of hydrogen bonding motifs, the unique molecular configuration of the siloxane oligomers on coated substrates enables both robust repellency to organic liquids and strong bonding to various substrates including metals, plastics, and even Teflon. We envision that not only DOSS coatings can be applied in a range of energy, environmental, and biomedical applications that require long-term services in harsh environmental conditions but also the design strategy of the oligomers can be adopted in the development of supramolecular materials with desirable multifunctionality.
RESUMEN
Ocean acidification (OA) is well-known for impairing marine calcification; however, the end response of several essential species to this perturbation remains unknown. Decreased pH and saturation levels (Ω) of minerals under OA is projected to alter shell crystallography and thus to reduce shell mechanical properties. This study examined this hypothesis using a commercially important estuarine oyster Magallana hongkongensis. Although shell damage occurred on the outmost prismatic layer and the undying myostracum at decreased pHâ¯7.6 and 7.3, the major foliated layer was relatively unharmed. Oysters maintained their shell hardness and stiffness through altered crystal unit orientation under pHâ¯7.6 conditions. However, under the undersaturated conditions (ΩCalâ¯~â¯0.8) at pHâ¯7.3, the realigned crystal units in foliated layer ultimately resulted in less stiff shells which indicated although estuarine oysters are mechanically resistant to unfavorable calcification conditions, extremely low pH condition is still a threat to this essential species.
Asunto(s)
Exoesqueleto/química , Carbonato de Calcio/química , Dióxido de Carbono/análisis , Ostrea/química , Agua de Mar/química , Exoesqueleto/ultraestructura , Animales , Fenómenos Biomecánicos , Calcificación Fisiológica , Cristalografía , Concentración de Iones de Hidrógeno , Microscopía Electroquímica de Rastreo , Ostrea/crecimiento & desarrollo , Ostrea/ultraestructuraRESUMEN
In this paper, silicon nanosheets (Si-NSs) are chemically synthesized by using graphene oxide nanosheets as the template. The obtained Si-NSs, which are aggregations of silicon nanocrystals with a size of â¼10 nm, are applied directly as the anode material for lithium ion batteries, delivering a reversible capacity of 800 mA h g-1 after 900 cycles at a rate as high as 8400 mA g-1. Ex situ measurements and in situ observations show the positive effect of the mesoporous structure on the structural stability of Si-NSs. The evolution and survivability of the porous structures during lithiation and delithiation processes are investigated by molecular dynamics simulations, demonstrating that the porous structure can enhance the amount of "active" Li atoms during the stable stage of cycling and therefore promote mass capacity. The longer the survival of the porous structure, the longer the high mass capacity can be retained.
RESUMEN
Previous studies have emphasized that the adhesion strength between solid objects tends to increase as the characteristic size of the objects decreases and eventually saturates at the theoretical adhesion strength below a critical size scale. Here we show that the adhesion strength between two spheres or between a sphere and a solid half-space actually exhibits a peak value at an optimal size. This optimal size arises owing to a transition between surface- and bulk-dominated interaction regimes at the nanoscale.
Asunto(s)
Modelos Teóricos , Nanosferas/química , Adhesividad , Tamaño de la PartículaRESUMEN
Correction for 'Mechanical and thermal properties of grain boundary in a planar heterostructure of graphene and hexagonal boron nitride' by Yinfeng Li, et al., Nanoscale, 2018, DOI: 10.1039/c7nr07306b.