Green one-step synthesis of ZnO/cellulose nanocrystal hybrids with modulated morphologies and superfast absorption of cationic dyes.

Zinc oxide/cellulose nanocrystal (ZnO/CNC) hybrids with modulated morphologies were prepared by using bamboo CNC as templates via green one-step technique. The effect of pH values on the morphology, microstructure, thermal stability, antibacterial efficiency and dye absorption kinetics of hybrids were investigated. A possible mechanism for various hybrid morphologies at different pH values was provided. All the samples exhibited high antibacterial ratios of 91.4%-99.8% against both Escherichia coli and Staphylococcus aureus. ZnO/CNC8.5 gave quick removal efficiency with high dye removal ratios in methylene blue (MB, 93.55%) and malachite green (MG, 99.02%), especially >91.47% and 97.85% within 5 min. The absorption capacity could reach up to 46.77 mg/g for MB and 49.51 mg/g for MG. Besides, absorption kinetics showed that the absorption behavior followed the pseudo-second-order kinetic model (R2 > 0.99996). Such ZnO/CNC hybrids show outstanding and low-cost adsorbent for efficient absorption of cationic dyes in wastewater treatment field.

Natural Biodegradable Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Nanocomposites with Multifunctional Cellulose Nanocrystals/Graphene Oxide Hybrids for High-Performance Food Packaging.

High-performance and useful graphene oxide (GO) and cellulose nanocrystals (CNCs) are easily extracted from natural graphite and cellulose raw materials, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is produced by bacterial fermentation from natural plant corn stalks, etc. In this study, novel ternary nanocomposites consisting of PHBV/cellulose nanocrystal-graphene oxide nanohybrids were prepared via a simple solution casting method. The synergistic effect of CNC with GO nanohybrids obtained by chemical grafting (CNC-GO, covalent bonds) and physical blending (CNC/GO, noncovalent bonds) on the physicochemical properties of PHBV nanocomposites was evaluated and the results compared with a single component nanofiller (CNC or GO) in binary nanocomposites. More interestingly, ternary nanocomposites displayed the highest thermal stability and mechanical properties. Compared to neat PHBV, the tensile strength and elongation to break increased by 170.2 and 52.1%, respectively, and maximum degradation temperature (Tmax) increment by 26.3 °C, were observed for the ternary nanocomposite with 1 wt % covalent bonded CNC-GO. Compared to neat PHBV, binary, and 1:0.5 wt % noncovalent CNC/GO based nanocomposites, the ternary nanocomposites with 1 wt % covalent bonded CNC-GO exhibited excellent barrier properties, good antibacterial activity (antibacterial ratio of 100.0%), reduced barrier properties, and lower migration level for both food simulants. Such a synergistic effect yielded high-performance ternary nanocomposites with great potential for bioactive food packaging materials.

Fabrication of multifunctional cellulose nanocrystals/poly(lactic acid) nanocomposites with silver nanoparticles by spraying method.

The poly (lactic acid) (PLA)/functionalized cellulose nanocrystals formates (CNFs) were prepared by solution casting and then the binary films were sprayed with silver ammonia aqueous solution to fabricate PLA/CNF/Ag ternary nanocomposites. It was found that both deposited silver (Ag) nanoparticles and CNFs showed efficient reinforcing effect on the thermal, mechanical, barrier properties and antibacterial activity of PLA matrix. Especially, the maximum decomposition temperature (Tmax) and Young's modulus of PLA/CNF/Ag(6) nanocomposite film increased by 15.5°C and 48.7%, respectively. Meanwhile an obvious reduction in the water vapor permeability was detected. Furthermore, the migration levels of the ternary nanocomposite films were well below the permitted limits in both non-polar and polar food simulants (60mgkg(-1)), and they showed a significant antibacterial activity influenced by the Ag contents. This study reveals that the novel nanocomposite films will offer a good perspective for food packaging applications.

Effect of silicon on the formation of silk fibroin/calcium phosphate composite.

The silk fibroin/calcium phosphate composites were prepared by adding the different amount of Na(2)SiO(3) to assess the effect of silicon on the HA (hydroxyapatite) formation in the composites. FTIR and XRD results suggested that the inorganic phase was constituted mainly by the amorphous DCPD (dicalcium phosphate dehydrate), a precursor of HA in the bone mineral, when the composites were prepared at the final Na(2)SiO(3) concentration lower than 0.008%. Otherwise, HA was formed as the predominant one in the as-prepared composite, accompanied with a conformational transition in the organic phase of silk fibroin protein from silk I (alpha-helix and/or polyglycine II (3(1)-helix) conformations) to silk II (antiparallel beta-sheet conformation). SEM images showed the different morphologies with the samples, i.e., sheet-like crystals in the composites prepared at a low Na(2)SiO(3) concentration and rod-like bundles in other composites. The rod-like bundles were connected together to form the porous network, due to the fact that the HA crystals grew with the aggregation of silk fibroin, and further accreted onto the silk fibroin fibrils. TG curves indicated that the composites prepared with a certain amount of additional SiO (3) (2-) had the higher thermal stability because of its high molecular orientation and crystallinity, and high water-holding capacity due to the porous microstructure.

[Structure-based design and biosynthesis of collagen proteins].

Collagen is the most abundant protein in human body and a periodic helix, i. e. , triple helix, fibrous protein, which provides the scaffold structures for the cell adhesion and macromolecule aggregation, etc. With the development of gene engineering and biomaterial technologies, and the incessant studies on the technique to obtain the proteins with special functions, the collagen protein has been one of the third generation biomaterials that attract more attention than others. In this paper, we reviewed the recent structure-based design and biosynthesis of collagen.