Ground-State Orbital Descriptors for Accelerated Development of Organic Room-Temperature Phosphorescent Materials.

Organic materials with room-temperature phosphorescence (RTP) are in high demand for optoelectronics and bioelectronics. Developing RTP materials highly relies on expert experience and costly excited-state calculations. It is a challenge to find a tool for effectively screening RTP materials. Herein we first establish ground-state orbital descriptors (πFMOs ) derived from the π-electron component of the frontier molecular orbitals to characterize the RTP lifetime (τp ), achieving a balance in screening efficiency and accuracy. Using the πFMOs , a data-driven machine learning model gains a high accuracy in classifying long τp , filtering out 836 candidates with long-lived RTP from a virtual library of 19,295 molecules. With the aid of the excited-state calculations, 287 compounds are predicted with high RTP efficiency. Impressively, experiments further confirm the reliability of this workflow, opening a novel avenue for designing high-performance RTP materials for potential applications.

Confining isolated chromophores for highly efficient blue phosphorescence.

High-efficiency blue phosphorescence emission is essential for organic optoelectronic applications. However, synthesizing heavy-atom-free organic systems having high triplet energy levels and suppressed non-radiative transitions-key requirements for efficient blue phosphorescence-has proved difficult. Here we demonstrate a simple chemical strategy for achieving high-performance blue phosphors, based on confining isolated chromophores in ionic crystals. Formation of high-density ionic bonds between the cations of ionic crystals and the carboxylic acid groups of the chromophores leads to a segregated molecular arrangement with negligible inter-chromophore interactions. We show that tunable phosphorescence from blue to deep blue with a maximum phosphorescence efficiency of 96.5% can be achieved by varying the charged chromophores and their counterions. Moreover, these phosphorescent materials enable rapid, high-throughput data encryption, fingerprint identification and afterglow display. This work will facilitate the design of high-efficiency blue organic phosphors and extend the domain of organic phosphorescence to new applications.

Ultralong Organic Phosphorescent Foams with High Mechanical Strength.

Ultralong organic phosphorescence (UOP) has aroused enormous interest in recent years. UOP materials are mainly limited to crystals or rigid host-guest systems. Their poor processability and mechanical properties critically hamper practical applications. Here, we reported a series of ultralong phosphorescent foams with high mechanical strength. Phosphorescence lifetime of the foam can reach up to 485.8 ms at room temperature. Impressively, lightweight gelatin foam can bear a compressive pressure of 4.44 MPa. Moreover, phosphorescence emission of polymer foam can be tuned from blue to orange through varying the excitation wavelength. Experimental data and theoretical calculations revealed that ultralong phosphorescence was ascribed to the fixation of multiple hydrogen bonds to the clusters of carbonyl groups. These results will allow for expanding the scope of luminescent foams, providing an ideal platform for developing ultralong phosphorescent materials with high mechanical strength.

Amorphous Ionic Polymers with Color-Tunable Ultralong Organic Phosphorescence.

Amorphous purely organic phosphorescence materials with long-lived and color-tunable emission are rare. Herein, we report a concise chemical ionization strategy to endow conventional poly(4-vinylpyridine) (PVP) derivatives with ultralong organic phosphorescence (UOP) under ambient conditions. After the ionization of 1,4-butanesultone, the resulting PVP-S phosphor showed a UOP lifetime of 578.36 ms, which is 525 times longer than that of PVP polymer itself. Remarkably, multicolor UOP emission ranging from blue to red was observed with variation of the excitation wavelength, which has rarely been reported for organic luminescent materials. This finding not only provides a guideline for developing amorphous polymers with UOP properties, but also extends the scope of room-temperature phosphorescence (RTP) materials for practical applications in photoelectric fields.

Design, Synthesis and Biological Evaluation of Novel Pyrazole Sulfonamide Derivatives as Potential AHAS Inhibitors.

Acetohydroxy acid synthase (AHAS; EC 2.2.1.6, also referred to as acetolactate synthase, ALS) has been considered as an attractive target for the design of herbicides. In this work, an optimized pyrazole sulfonamide base scaffold was designed and introduced to derive novel potential AHAS inhibitors by introducing a pyrazole ring in flucarbazone. The results of in vivo herbicidal activity evaluation indicates compound 3b has the most potent activity with rape root length inhibition values of 81% at 100 mg/L, and exhibited the best inhibitory ability against Arabidopsis thaliana AHAS. With molecular docking, compound 3b insert into Arabidopsis thaliana AHAS stably by an H-bond with Arg377 and cation-π interactions with Arg377, Trp574, Tyr579. This study suggests that compound 3b may serve as a potential AHAS inhibitor which can be used as a novel herbicides and provides valuable clues for the further design and optimization of AHAS inhibitors.

Discovery of N-(benzyloxy)-1,3-diphenyl-1H-pyrazole-4-carboxamide derivatives as potential antiproliferative agents by inhibiting MEK.

Mitogen activated protein kinase (MAPK) signal transduction pathway has been proved to play an important role in tumorigenesis and cancer development. MEK inhibitor has been demonstrated significant clinical benefit for blocking MAPK pathway activation and possibly could block reactivation of the MAPK pathway at the time of BRAF inhibitor resistance. Twenty N-(benzyloxy)-1,3-diphenyl-1H-pyrazole-4-carboxamide derivatives have been designed and synthesized as MEK inhibitors, and their biological activities were evaluated. Among these compounds, compound 7b showed the most potent inhibitory activity with IC50 of 91nM for MEK1 and GI50 value of 0.26µM for A549 cells. The SAR analysis and docking simulation were performed to provide crucial pharmacophore clues that could be used in further structure optimization.

Design, Synthesis and Biological Evaluation of α-Aminophosphonate Derivatives Containing a Pyrazole Moiety.

Acetylcholinesterase (AChE) is a key enzyme which present in the central nervous system of living organisms. Organophosphorus pesticides (OPs) that serve as insecticides are AChE inhibitors which have been used widely in agriculture. A series of novel OPs containing pyrazole moiety have been designed and synthesized. The biological evaluation indicated compound 4e appeared 81% larvicidal activity against Plutella xylostella at the concentration of 0.1 mg/L and the inhibition of AChE by compound 4e was distinctly enhanced with the increasing doses. Molecular docking of compound 4e into the three dimensional X-ray structure of the Drosophila melanogaster AChE (DmAChE, PDB code: 1QO9) was carried out utilizating the Discovery Studio (DS), the binding model revealed that the title structure was tightly embedded in the binding sites of DmAChE. Therefore, we suggest that compound 4e may serve as a novel AChE inhibitor that can be utilized as a new insecticidal drug.

Boosting organic phosphorescence in adaptive host-guest materials by hyperconjugation.

Phosphorescence is ubiquitous in heavy atom-containing organic phosphors, which attracts considerable attention in optoelectronics and bioelectronics. However, heavy atom-free organic materials with efficient phosphorescence are rare under ambient conditions. Herein, we report a series of adaptive host-guest materials derived from dibenzo-heterocyclic analogues, showing host-dependent color-tunable phosphorescence with phosphorescence efficiency of up to 98.9%. The adaptive structural deformation of the guests arises from the hyperconjugation, namely the n→π* interaction, enabling them to inhabit the cavity of host crystals in synergy with steric effects. Consequently, a perfect conformation match between host and guest molecules facilitates the suppression of triplet exciton dissipation, thereby boosting the phosphorescence of these adaptive materials. Moreover, we extend this strategy to a ternary host-guest system, yielding both excitation- and time-dependent phosphorescence with a phosphorescence efficiency of 92.0%. This principle provides a concise way for obtaining efficient and color-tunable phosphorescence, making a major step toward potential applications in optoelectronics.

Narrowband room temperature phosphorescence of closed-loop molecules through the multiple resonance effect.

Luminescent materials with narrowband emission show great potential for diverse applications in optoelectronics. Purely organic phosphors with room-temperature phosphorescence (RTP) have made significant success in rationally manipulating quantum efficiency, lifetimes, and colour gamut in the past years, but there is limited attention on the purity of the RTP colours. Herein we report a series of closed-loop molecules with narrowband phosphorescence by multiple resonance effect, which significantly improves the colour purity of RTP. Phosphors show narrowband phosphorescence with full width at half maxima (FWHM) of 30 nm after doping into a rigid benzophenone matrix under ambient conditions, of which the RTP efficiency reaches 51.8%. At 77 K, the FWHM of phosphorescence is only 11 nm. Meanwhile, the colour of narrowband RTP can be tuned from sky blue to green with the modification of methyl groups. Additionally, the potential applications in X-ray imaging and display are demonstrated. This work not only outlines a design principle for developing narrowband RTP materials but also makes a major step forward extending the potential applications of narrowband luminescent materials in optoelectronics.

Abnormal thermally-stimulated dynamic organic phosphorescence.

Dynamic luminescence behavior by external stimuli, such as light, thermal field, electricity, mechanical force, etc., endows the materials with great promise in optoelectronic applications. Upon thermal stimulus, the emission is inevitably quenched due to intensive non-radiative transition, especially for phosphorescence at high temperature. Herein, we report an abnormal thermally-stimulated phosphorescence behavior in a series of organic phosphors. As temperature changes from 198 to 343 K, the phosphorescence at around 479 nm gradually enhances for the model phosphor, of which the phosphorescent colors are tuned from yellow to cyan-blue. Furthermore, we demonstrate the potential applications of such dynamic emission for smart dyes and colorful afterglow displays. Our results would initiate the exploration of dynamic high-temperature phosphorescence for applications in smart optoelectronics. This finding not only contributes to an in-depth understanding of the thermally-stimulated phosphorescence, but also paves the way toward the development of smart materials for applications in optoelectronics.

Multifunctional magnetocaloric bone cement with a time-varying alkaline microenvironment for sequential bacterial inhibition, angiogenesis and osteogenesis.

Repairing infected bone defects remains a severe challenge due to antibiotic abuse and recurrence. Hence, we modified magnetocaloric Fe3O4 nanoparticles and added them to magnesium calcium phosphate bone cement (MCPC) to fabricate multifunctional magnetic composites for sequential bacterial inhibition, angiogenesis and osteogenesis. Nevertheless, high doses of Mg ions and Fe ions were released from MCPC, which adversely affected osteogenesis. Thus, Fe3O4 was modified using gelatin according to the emulsification crosslinking method, which exhibited a controllable magnetocaloric effect and degradation behavior, and favorable anti-bacterial ability under the action of an alternating magnetic field (AMF). In the early stage, the residual MgO created a local strong alkaline microenvironment by hydrolysis, which inhibited the function and activity of S. aureus and E. coli. At the later stage, the MCPC composites were controllably degraded under the function of gelatin and maintained a long-term local slight alkaline microenvironment that promoted the osteogenic differentiation and mineralization of BMSCs. In vivo subcutaneous implantation experiments further indicated that MCPC composites showed good biocompatibility and facilitated angiogenesis, presenting a promising future in magnetic materials design and infectious bone defect repair.

Selection of characteristic wavelengths using SMA for laser induced fluorescence spectroscopy of power transformer oil.

As the core component of the power system, the accurate analysis of its state and fault type is very important for the maintenance and repair of the transformer. The detection method represented by the transformer oil dissolved gas has the disadvantages of complicated processing steps and high operation requirements. Here, laser induced fluorescence (LIF) spectroscopy was applied for the analysis of transformer oil. Specifically, the slime mould algorithm (SMA) was used to select the characteristic wavelengths of the transformer oil fluorescence spectrum, and on this basis, a transformer fault diagnosis model was constructed. First, samples of transformer oil in different states were collected, and the fluorescence spectrum of the transformer oil was obtained with the help of the LIF acquisition system. Then, different spectral pretreatments were performed on the original fluorescence spectra, and it was found that the pretreatment effect of Savitzky-Golay smoothing (SG) was the best. Then, SMA was used to screen the characteristic wavelengths of the fluorescence spectrum, and 137 characteristic wavelengths were screened out to realize the accurate identification of the fluorescence spectrum of the transformer oil. In addition, the advantages of SMA for feature wavelength screening of transformer oil fluorescence spectra were demonstrated by comparing with traditional feature extraction strategies using principal components analysis (PCA). The research results show that it is effective to use SMA to screen the characteristic wavelengths of the LIF spectroscopy of transformer oil and use it for transformer fault diagnosis, which is of great significance for promoting the development of transformer fault diagnosis technology.

Narrowband Organic Afterglow via Phosphorescence Förster Resonance Energy Transfer for Multifunctional Applications.

Achieving multicolor organic afterglow materials with narrowband emission and high color purity is important in various optoelectronic fields but remains a great challenge. Here, an efficient strategy is presented to obtain narrowband organic afterglow materials via Förster resonance energy transfer from long-lived phosphorescence donors to narrowband fluorescence acceptors in a polyvinyl alcohol matrix. The resulting materials exhibit narrowband emission with a full width at half maximum (FWHM) as small as 23 nm and the longest lifetime of 721.22 ms. Meanwhile, by pairing the appropriate donors and acceptors, multicolor and high color purity afterglow ranging from green to red with the maximum photoluminescence quantum yield of 67.1% are achieved. Moreover, given their long luminescence lifetime, high color purity, and flexibility, the potential applications are demonstrated in high-resolution afterglow displays and dynamic and quick information identification in low-light conditions. This work provides a facile approach for developing multicolor and narrowband afterglow materials as well as expands the features of organic afterglow.

Halogenated Thermally Activated Delayed Fluorescence Materials for Efficient Scintillation.

Organic scintillators, materials with the ability to exhibit luminescence when exposed to X-rays, have aroused increasing interest in recent years. However, the enhancement of radioluminescence and improving X-ray absorption of organic scintillators lie in the inherent dilemma, due to the waste of triplet excitons and weak X-ray absorption during scintillation. Here, we employ halogenated thermally activated delayed fluorescence materials to improve the triplet exciton utilization and X-ray absorption simultaneously, generating efficient scintillation with a low detection limit, which is one order of magnitude lower than the dosage for X-ray medical diagnostics. Through experimental study and theoretical calculation, we reveal the positive role of X-ray absorption, quantum yields of prompt fluorescence, and intersystem crossing in promoting the radioluminescence intensity. This finding offers an opportunity to design diverse types of organic scintillators and expands the applications of thermally activated delayed fluorescence.

Self-contained photo-acid generators with high quantum yields triggered by photo-cyclization.

We present a novel series of neutral photo-acid generators (PAGs) based on carbazole derivatives. A photo-induced 6π-electrocyclization reaction of carbazole derivatives triggers the subsequent release of halogen acids. With UV irradiation, PAGs spontaneously release acid molecules quantitatively forming polyaromatic compounds. To our knowledge, it is considered the highest quantum yield (over 85%) among Brønsted PAGs.

Ferroelectric Proximity Effect and Topological Hall Effect in SrRuO3/BiFeO3 Multilayers.

Interfaces between complex oxides provide a unique opportunity to discover novel interfacial physics and functionalities. Here, we fabricate the multilayers of itinerant ferromagnet SrRuO3 (SRO) and multiferroic BiFeO3 (BFO) with atomically sharp interfaces. Atomically resolved transmission electron microscopy reveals that a large ionic displacement in BFO can penetrate into SRO layers near the BFO/SRO interfaces to a depth of 2-3 unit cells, indicating the ferroelectric proximity effect. A topological Hall effect is indicated by hump-like anomalies in the Hall measurements of the multilayer with a moderate thickness of the SRO layer. With magnetic measurements, it can be further confirmed that each SRO layer in the multilayers can be divided into interfacial and middle regions, which possess different magnetic ground states. Our work highlights the key role of functional heterointerfaces in exotic properties and provides an important guideline to design spintronic devices based on magnetic skyrmions.

Ultralong organic phosphorescence from isolated molecules with repulsive interactions for multifunctional applications.

Intermolecular interactions, including attractive and repulsive interactions, play a vital role in manipulating functionalization of the materials from micro to macro dimensions. Despite great success in generation of ultralong organic phosphorescence (UOP) by suppressing non-radiative transitions through attractive interactions recently, there is still no consideration of repulsive interactions on UOP. Herein, we proposed a feasible approach by introducing carboxyl groups into organic phosphors, enabling formation of the intense repulsive interactions between the isolated molecules and the matrix in rigid environment. Our experimental results show a phosphor with a record lifetime and quantum efficiency up to 3.16 s and 50.0% simultaneously in film under ambient conditions. Considering the multiple functions of the flexible films, the potential applications in anti-counterfeiting, afterglow display and visual frequency indicators were demonstrated. This finding not only outlines a fundamental principle to achieve bright organic phosphorescence in film, but also expands the potential applications of UOP materials.

Organic phosphorescent nanoscintillator for low-dose X-ray-induced photodynamic therapy.

X-ray-induced photodynamic therapy utilizes penetrating X-rays to activate reactive oxygen species in deep tissues for cancer treatment, which combines the advantages of photodynamic therapy and radiotherapy. Conventional therapy usually requires heavy-metal-containing inorganic scintillators and organic photosensitizers to generate singlet oxygen. Here, we report a more convenient strategy for X-ray-induced photodynamic therapy based on a class of organic phosphorescence nanoscintillators, that act in a dual capacity as scintillators and photosensitizers. The resulting low dose of 0.4 Gy and negligible adverse effects demonstrate the great potential for the treatment of deep tumours. These findings provide an optional route that leverages the optical properties of purely organic scintillators for deep-tissue photodynamic therapy. Furthermore, these organic nanoscintillators offer an opportunity to expand applications in the fields of biomaterials and nanobiotechnology.

Manipulating the Ferroelectric Domain States and Structural Distortion in Epitaxial BiFeO3 Ultrathin Films via Bi Nonstoichiometry.

Exploring and manipulating domain configurations in ferroelectric thin films are of critical importance for the design and fabrication of ferroelectric heterostructures with a novel functional performance. In this study, BiFeO3 (BFO) ultrathin films with various Bi/Fe ratios from excess Bi to deficient Bi have been grown on (La0.7Sr0.3)MnO3 (LSMO)-covered SrTiO3 substrates by a laser molecular beam epitaxy system. Atomic force microscopy and piezoresponse force microscopy measurements show that both the surface morphology and ferroelectric polarization of the films are relevant to Bi nonstoichiometry. More significantly, a Bi-excess thin film shows an upward (from substrate to film surface) uniform ferroelectric polarization, whereas a Bi-deficient thin film exhibits a downward uniform polarization, which means the as-grown polarization of BFO thin films can be controlled by changing the Bi contents. Atomic-scale structural and chemical characterizations and second-harmonic generation measurements reveal that two different kinds of structural distortions and interface atomic configurations in the BFO/LSMO heterostructures can be induced by the change of Bi nonstoichiometry, leading to the two opposite as-grown ferroelectric polarizations. It has also been revealed that the band gap of BFO thin films can be modulated via Bi nonstoichiometry. These results demonstrate that Bi nonstoichiometry plays a key role on the ferroelectric domain states and physical properties of BFO thin films and also open a new avenue to manipulate the structure and ferroelectric domain states in BFO thin films.