M-N3 Configuration on Boron Nitride Boosts Singlet Oxygen Generation via Peroxymonosulfate Activation for Selective Oxidation.

Singlet oxygen (1O2) is an essential reactive species responsible for selective oxidation of organic matter, especially in Fenton-like processes. However, due to the great limitations in synthesizing catalysts with well-defined active sites, the controllable production and practical application of 1O2 remain challenging. Herein, guided by theoretical simulations, a series of boron nitride-based single-atom catalysts (BvBN/M, M=Co, Fe, Cu, Ni and Mn) were synthesized to regulate 1O2 generation by activating peroxymonosulfate (PMS). All the fabricated BvBN/M catalysts with explicit M-N3 sites promoted the self-decomposition of the two PMS molecules to generate 1O2 with high selectivity, where BvBN/Co possessed moderate adsorption energy and d-band center exhibited superior catalytic activity. As an outcome, the BvBN/Co-PMS system coupled with membrane filtration technology could continuously transform aromatic alcohols to aldehydes with nearly 100 % selectivity and conversion rate under mild conditions, suggesting the potential of this novel catalytic system for green organic synthesis.

High Conductivity, Semiconducting, and Metallic PEDOT:PSS Electrode for All-Plastic Solar Cells.

Plastic electrodes are desirable for the rapid development of flexible organic electronics. In this article, a plastic electrode has been prepared by employing traditional conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and plastic substrate polyethersulfone (PES). The completed electrode (Denote as HC-PEDOT:PSS) treated by 80% concentrated sulfuric acid (H2SO4) possesses a high electrical conductivity of over 2673 S/cm and a high transmittance of over 90% at 550 nm. The high conductivity is attributed to the regular arrangement of PEDOT molecules, which has been proved by the X-ray diffraction characterization. Temperature-dependent conductivity measurement reveals that the HC-PEDOT:PSS possesses both semiconducting and metallic properties. The binding force and effects between the PEDOT and PEI are investigated in detail. All plastic solar cells with a classical device structure of PES/HC-PEDOT:PSS/PEI/P3HT:ICBA/EG-PEDOT:PSS show a PCE of 4.05%. The ITO-free device with a structure of Glass/HC-PEDOT:PSS/Al4083/PM6:Y6/PDINO/Ag delivers an open-circuit voltage (VOC) of 0.81 V, short-circuit current (JSC ) of 23.5 mA/cm2, fill factor (FF) of 0.67 and a moderate power conversion efficiency (PCE) of 12.8%. The above results demonstrate the HC-PEDOT:PSS electrode is a promising candidate for all-plastic solar cells and ITO-free organic solar cells.

Construction of durable superhydrophilic activated carbon fibers based material for highly-efficient oil/water separation and aqueous contaminants degradation.

Developing filtering materials with high permeation flux and contaminant removal rate is of great importance for oily wastewater remediation. Herein, a robust three-dimensional (3D) activated carbon fibers (ACFs) based composite with uniformly grown layered double hydroxide (LDH) on the surface was successfully constructed through a feasible hydrothermal strategy. The LDH with a high surface energy and vertically aligned structure could provide superhydrophilicity to ACFs. Systematic investigation confirmed that the 3D material could overcome the size mismatch between the ACFs macropores and tiny emulsified droplets through the combination of size-sieving filtration on the surface and oil droplet coalescence in the fiber network. This process efficiently separated the intractable surfactant-stabilized oil-in-water emulsions with high permeation flux (up to 4.16 × 106 L m-2 h-1 bar-1). Notably, the LDH also had well-dispersed catalytic active sites, which could initiate advanced oxidation processes (AOPs) to efficiently eliminate various types of water-soluble organic pollutants (e.g., pharmaceuticals, phenolic compounds and organic dyes). The resulting modified ACFs exhibited exceptional removal rates for both oil and organic pollutants in the complex sewage during the continuous filtration process. These versatile abilities integrated with the facile preparation method reported herein provide outstanding prospects for the large-scale treatment of oily wastewater.

Ectodysplasin A (EDA) Signaling: From Skin Appendage to Multiple Diseases.

Ectodysplasin A (EDA) signaling is initially identified as morphogenic signaling regulating the formation of skin appendages including teeth, hair follicles, exocrine glands in mammals, feathers in birds and scales in fish. Gene mutation in EDA signaling causes hypohidrotic ectodermal dysplasia (HED), a congenital hereditary disease with malformation of skin appendages. Interestingly, emerging evidence suggests that EDA and its receptors can modulate the proliferation, apoptosis, differentiation and migration of cancer cells, and thus may regulate tumorigenesis and cancer progression. More recently, as a newly discovered hepatocyte factor, EDA pathway has been demonstrated to be involved in the pathogenesis of nonalcoholic fatty liver disease (NAFLD) and type II diabetes by regulating glucose and lipid metabolism. In this review, we summarize the function of EDA signaling from skin appendage development to multiple other diseases, and discuss the clinical application of recombinant EDA protein as well as other potential targets for disease intervention.

Fe3O4 nanoparticles encapsulated in boron nitride support via N-doped carbon layer as a peroxymonosulfate activator for pollutant degradation: Important role of metal boosted C-N sites.

Developing highly efficient and stable catalysts for peroxymonosulfate (PMS) based advanced oxidation processes (AOPs) are crucial in the field of environmental remediation. In this work, a facile encapsulated-precursor pyrolysis strategy was reported to prepare a competent PMS-activation catalyst, in which uniformly distributed Fe3O4 nanoparticles were firmly anchored on porous boron nitride (BN) nanosheets by N-doped carbon shell (NC layer). Taking advantage of strong metal-support interaction, the as-synthesized catalyst (BFA-500) could efficiently activate PMS to achieve 100% removal of 4-chlorophenol (4-CP) in 6 min, and the corresponding turnover frequency (TOF) value was 1-2 orders of magnitude higher than that of the benchmark homogeneous (Fe2+) and nanoparticle (Fe0 and Fe3O4) catalysts. Moreover, the well protected encapsulated structure of BFA-500 ensured the remarkable stability that could effectively resist the interference of complex water environment, including initial pH value, various inorganic ions and actual water, and its catalytic activity remained almost unchanged in 5 use-regeneration cycles. More importantly, the generation of O2•- and 1O2 radicals for the 4-CP removal in BFA-500/PMS system was ascribed to Fe3O4 boosted C-N sites containing pyridinic N, where electrons transferred from the embedded Fe3O4 nanoparticles to C-N sites to secure the PMS dissociation into reactive radicals. Overall, this work provided a promising way to design desired PMS-activation catalyst toward wastewater purification.

Fe-based carbonitride as Fenton-like catalyst for the elimination of organic contaminants.

The Fenton-like process has been regarded as a clean and efficient approach to generate reactive oxygen species (ROS) to deal with the ever-growing environmental pollution. However, developing improved catalysts with adequate activity and stability remains a long-term goal for practical application. Herein, crystalline carbon nanotubes (CNTs) interconnected Fe/Fe3C-doped nanoporous carbonitride (Fe-NC) was easily prepared by the pyrolysis of ZIF-8 confined with Fe3+. The obtained Fe-NCs possessed high degrees of graphitic carbon and nitrogen. Such Fe-NCs can enhance the activation of peroxymonosulfate (PMS) for the removal of multiple organic contaminants. The optimized Fe-NC/PMS system exhibited impressive catalytic performance, with a TOF as high as 4.43 min-1 for 3BF degradation, and the removal efficiency of other dyes, phenols and antibiotics was up to 96.2% within 10 min. The removal efficiency of 3BF was 93.4% within 10 min with extremely low iron ions leaching (<0.052 mg/L) even after five cycles. In addition, the effects of pH on the catalytic performance demonstrated that the decomposition of 3BF exceeded 95.6% even when the initial pH varied from 5 to 10. We confirmed that SO4-, OH, O2- and 1O2 were generated in the catalytic system of Fe-NC/PMS, which played a critical role in degrading the organics. These findings provide new insights into the design of environmental-friendly Fenton-like catalysts with high efficiency and favorable stability in environmental remediation.

Degradation of carbamazepine by MWCNTs-promoted generation of high-valent iron-oxo species in a mild system with O-bridged iron perfluorophthalocyanine dimers.

Metal phthalocyanine has been extensively studied as a catalyst for degradation of carbamazepine (CBZ). However, metal phthalocyanine tends to undergo their own dimerization or polymerization, thereby reducing their activity points and affecting their catalytic properties. In this study, a catalytic system consisting of O-bridged iron perfluorophthalocyanine dimers (FePcF16-O-FePcF16), multi-walled carbon nanotubes (MWCNTs) and H2O2 was proposed. The results showed MWCNTs loaded with FePcF16-O-FePcF16 can achieve excellent degradation of CBZ with smaller dosages of FePcF16-O-FePcF16 and H2O2, and milder reaction temperatures. In addition, the results of experiments revealed the reaction mechanism of non-hydroxyl radicals. The highly oxidized high-valent iron-oxo (Fe(IV)=O) species was the main reactive species in the FePcF16-O-FePcF16/MWCNTs/H2O2 system. It is noteworthy that MWCNTs can improve the dispersion of FePcF16-O-FePcF16, contributing to the production of highly oxidized Fe(IV)=O. Then, the pathway of CBZ oxidative degradation was speculated, and the study results also provide new ideas for metal phthalocyanine-loaded carbon materials to degrade emerging pollutants.

CuCo2O4 supported on activated carbon as a novel heterogeneous catalyst with enhanced peroxymonosulfate activity for efficient removal of organic pollutants.

CuCo2O4 was synthesized via a relatively simple method, and innovatively supported onto the activated carbon (AC) by calcination to obtain a novel heterogeneous catalyst (AC-CuCo2O4). Brilliant red 3BF (3BF) was selected as the probe compound to investigate the catalytic activity of AC-CuCo2O4 in the presence of peroxymonosulfate (PMS). The results showed that 98% removal rate could be achieved and the reaction rate constant (0.476 min-1) was 5.2 times greater than that of CuCo2O4 alone (0.091min-1), suggesting that the introduction of AC could greatly enhance the catalytic activity of pure CuCo2O4. Typically, the 3BF removal was as high as 96% after five cycles, showing the good stability of catalyst reuse. Additionally, the effects of the initial pH, catalyst dosage, PMS concentration and reaction temperature on the 3BF removal were investigated, demonstrating that AC-CuCo2O4 effectively remove 3BF over a wide pH range (5.0-10.0) and possessed temperature-tolerant performance. To further explore the 3BF removal mechanism, electron paramagnetic resonance technology combining with trapping agents was employed to confirm the involvement of reactive oxygen species including SO4•-, •OH, O2•- and 1O2, which distinctly differed from the reported CuCo2O4 for PMS activation. These findings provided an addition promising strategy in environmental remediation.

LYG-202 inhibits activation of endothelial cells and angiogenesis through CXCL12/CXCR7 pathway in breast cancer.

Angiogenesis is critical for the growth and metastasis of triple-negative breast cancer (TNBC) and its inhibition reduces the risk of progression of metastatic TNBC. In this study, we investigated that LYG-202, a flavonoid with a piperazine substitution, inhibited angiogenesis induced by conditioned media (CM) from MDA-MB-231 cells under hypoxia and revealed its underlying mechanism. The results showed that LYG-202 decreased CXCL12 secretion and CXCR7 expression, leading to suppression of its downstream ERK/AKT/nuclear factor kappa B (NF-κB) signaling, which eventually decreased the expression of MMP-2, MMP-9, RhoA and increased VE-cadherin expression in EA.hy 926 cells treated with CM from MDA-MB-231 cells under hypoxia. The decreased migration ability, increased cell adhesion and inhibited CXCR7 pathway by LYG-202 could also be reproduced in human umbilical vein endothelial cells. More importantly, LYG-202 also inhibited tumor angiogenesis and tumor growth of human breast cancer MDA-MB-231 cells in nude mice through CXCL12/CXCR7 pathway. In summary, LYG-202 is a potential agent to prohibit tumor angiogenesis through inhibiting the activation of endothelial cells.

Activation of phospholipase C-γ1 and translocation of phosphatidylinositol-3,4,5-trisphosphate 3-phosphatase contribute to GL-V9-induced apoptosis in human gastric cancer cells.

Gastric cancer is the most common type of tumor in developing countries and the fourth most frequently diagnosed cancer worldwide. Here, we demonstrated the apoptotic effects of GL-V9 on several human gastric cancer cells and selected MGC-803 cells to uncover the underlying mechanism. GL-V9 elevated Bax/Bcl-2 ratio, abated mitochondrial membrane potential and triggered the onset of apoptotic execution in MGC-803 cells. Our research revealed that CHOP silencing could not inhibit apoptosis, neither could it block Ca2+ release, suggesting that GL-V9-induced apoptosis was independent of CHOP. Furthermore, GL-V9 increased mitochondrial Ca2+ uptake through 1,4,5-triphosphate (IP3) receptor via the activation of phospholipase C-γ1 and the translocation of phosphatidylinositol-3,4,5-trisphosphate 3-phosphatase from nucleus to endoplasmic reticulum. Moreover, in-vivo studies indicated that GL-V9 exhibited significant MGC-803 xenografts regression in nude mice with low systemic toxicity. In conclusion, GL-V9 could induce apoptosis in gastric cancer cells, and would be a promising therapeutical agent against gastric cancer.

Oroxylin A inhibits invasion and migration through suppressing ERK/GSK-3ß signaling in snail-expressing non-small-cell lung cancer cells.

Snail is closely linked to tumor invasion, metastasis, and recurrence and indicates prognosis of patients suffering from cancer. Overexpression of Snail increases motility and invasiveness of cancer cells, which has become target for anti-metastatic treatment. Oroxylin A, a natural compound extracted from Scutellaria radix, has been reported to inhibit invasion and migration in breast cancer. In this study, we investigated the anti-invasive effect of oroxylin A on lung cells and uncovered its underlying mechanism. The results suggested that oroxylin A could inhibit migration and invasion in Snail-expressing 95-D, and A549 cells whereas it had little effect on non-expressing GLC-82 cells. Furthermore, enhanced Snail expression after transfection of Snail vector in GLC-82 cells is decreased by oroxylin A. Snail can also induce epithelial-mesenchymal transition. We found oroxylin A could reverse TGFß1-induced epithelial-mesenchymal transition by inhibiting Snail expression. As a result, oroxylin A up-regulated E-cadherin expression and down-regulated vimentin, MMP-9, and CD44v6 expression, which could lead to the inhibition of tumor migration and invasion. Mechanically, we demonstrated that oroxylin A suppressed activation of ERK instead of AKT pathway and then promoted activation of GSK-3ß to reduce Snail protein content. Finally, we established transplanted, metastatic, and orthotopic models of A549 cells, and found that oroxylin A inhibited the growth and lung metastasis of A549 cells in vivo. Taken together, we proposed that oroxylin A might be a promising candidate targeting tumor metastasis. © 2016 Wiley Periodicals, Inc.

Separation and reutilization of heavy metal ions in wastewater assisted by p-BN adsorbent.

Extracting heavy metal ions from wastewater has significant implications for both environmental remediation and resource preservation. However, the conventional adsorbents still suffer from incomplete ion removal and low utilization efficiency of the recovered metals. Herein, we present an extraction and reutilization method assisted by porous boron nitride (p-BN) containing high-density N atoms for metal recovery with simultaneous catalyst formation. The p-BN exhibits stable and efficient metal adsorption performance, particularly for ultra-trace-level water purification. The distribution coefficients towards Pb2+, Cd2+, Co2+ and Fe3+ can exceed 106 mL g-1 and the residual concentrations that reduced from 1 mg L-1 to 0.8-1.3 µg L-1 are much lower than the acceptable limits in drinking water standards of World Health Organization. Meanwhile, the used p-BN after Co ion adsorption can be directly adopted as a high-efficiency catalyst for activating peroxymonosulfate (PMS) in organic pollutant degradation without additional post-treatment, avoiding the secondary metal pollution and the problems of neglected manpower and energy consumption. Moreover, a flow-through multistage utilization system assisted by p-BN/polyvinylidene fluoride (PVDF) membrane is constructed for achieving both metal ion separation and reutilization in the removal of organic pollutants, providing a new avenue for sustainable wastewater remediation.

Edaravone Dexborneol mitigates pathology in animal and cell culture models of Alzheimer's disease by inhibiting neuroinflammation and neuronal necroptosis.

BACKGROUND: Alzheimer's disease (AD) is the most prevalent neurodegenerative disease with limited disease-modifying treatments. Drug repositioning strategy has now emerged as a promising approach for anti-AD drug discovery. Using 5×FAD mice and Aß-treated neurons in culture, we tested the efficacy of Y-2, a compounded drug containing the antioxidant Edaravone (Eda), a pyrazolone and (+)-Borneol, an anti-inflammatory diterpenoid from cinnamon, approved for use in amyotrophic lateral sclerosis patients. RESULTS: We examined effects of Y-2 versus Eda alone by i.p. administered in 8-week-old 5×FAD mice (females) for 4 months by comparing cognitive function, Aß pathologies, neuronal necroptosis and neuroinflammation. Using primary neurons and astrocytes, as well as neuronal and astrocytic cell lines, we elucidated the molecular mechanisms of Y-2 by examining neuronal injury, astrocyte-mediated inflammation and necroptosis. Here, we find that Y-2 improves cognitive function in AD mice. Histopathological data show that Y-2, better than Eda alone, markedly ameliorates Aß pathologies including Aß burden, astrogliosis/microgliosis, and Tau phosphorylation. In addition, Y-2 reduces Aß-induced neuronal injury including neurite damage, mitochondrial impairment, reactive oxygen species production and NAD+ depletion. Notably, Y-2 inhibits astrocyte-mediated neuroinflammation and attenuates TNF-α-triggered neuronal necroptosis in cell cultures and AD mice. RNA-seq further demonstrates that Y-2, compared to Eda, indeed upregulates anti-inflammation pathways in astrocytes. CONCLUSIONS: Our findings infer that Y-2, better than Eda alone, mitigates AD pathology and may provide a potential drug candidate for AD treatment.

Integrating adsorption and in situ advanced oxidation for the treatment of organic wastewater by 3D carbon aerogel embedded with Fe-doped carbonitrides.

Wastewater containing organic pollutants with high toxicity and poor biodegradability poses a considerable threat to human health and the ecosystem. Although adsorption and advanced oxidation processes (AOPs) are currently the most widely used technologies for wastewater treatment, limitations of these two independent processes make the treatment effect unsatisfactory. Herein, a system of integrating adsorption and subsequent in situ AOPs is established by a 3D carbon aerogel embedded with Fe-doped carbonitrides (Fe-NC/CAG). The SEM and BET analysis demonstrate that Fe-NC/CAG possesses porous structures with a specific surface area of 518.7 m2/g. The XRD result indicates the formation of Fe0 and Fe3O4 in Fe-NC/CAG. The impacts of operational parameters such as Fe-NC/CAG dosage, pollutants concentration, temperature, initial pH, and inorganic ions on the adsorption efficiency are investigated. The adsorption kinetics is predominantly based on the pseudo-second-order model. After adsorbing organic pollutants, the Fe-NC/CAG is immersed in peroxymonosulfate (PMS) solution. The adsorbed pollutants are in situ degraded by PMS-based AOPs, leading to the regeneration of Fe-NC/CAG. At optimum conditions, the integrating process established by Fe-NC/CAG achieves over 90% removal of antibiotics, phenolics, and dyes as well as keeps stable performance even after 6 cycles. This integrating adsorption and AOPs system is expected to open up a rich field for wastewater treatment.

EDA ligand triggers plasma membrane trafficking of its receptor EDAR via PKA activation and SNAP23-containing complexes.

BACKGROUND: Ectodysplasin-A (EDA), a skin-specific TNF ligand, interacts with its membrane receptor EDAR to trigger EDA signaling in skin appendage formation. Gene mutations in EDA signaling cause Anhidrotic/Hypohidrotic Ectodermal Dysplasia (A/HED), which affects the formation of skin appendages including hair, teeth, and several exocrine glands. RESULTS: We report that EDA triggers the translocation of its receptor EDAR from a cytosolic compartment into the plasma membrane. We use protein affinity purification to show that upon EDA stimulation EDAR associates with SNAP23-STX6-VAMP1/2/3 vesicle trafficking complexes. We find that EDA-dependent PKA activation is critical for the association. Notably, either of two HED-linked EDAR mutations, T346M and R420W, prevents EDA-induced EDAR translocation; and both EDA-induced PKA activation and SNAP23 are required for Meibomian gland (MG) growth in a skin appendage model. CONCLUSIONS: Overall, in a novel regulatory mechanism, EDA increases plasma membrane translocation of its own receptor EDAR, augmenting EDA-EDAR signaling in skin appendage formation. Our findings also provide PKA and SNAP23 as potential targets for the intervention of HED.

Preparation of Open-Cell Long-Chain Branched Polypropylene Foams for Oil Absorption.

This study aimed to prepare open-cell foams using a blend of long-chain branched polypropylene and polyolefin elastomer (LCBPP/POE) for the production of reusable oil absorbents. The supercritical CO2 foaming process was conducted using a two-step batch rapid depressurization method. This unique two-step foaming approach significantly expanded the temperature and pressure windows, resulting in more uniform cells with smaller sizes, ultimately leading to higher expansion ratios and an increased open cell content. The foaming process was optimized by adjusting parameters, such as the LCBPP/POE ratio, foaming temperature, and foaming pressure, reaching a maximum open cell content of 97.6% and a maximum expansion ratio of 48. The influence of polypropylene (PP) crystallization was investigated with the aid of scanning electron microscopy and differential scanning calorimetry. Furthermore, the hydrophobic and lipophilic characteristics of the LCBPP/POE open-cell foam were determined via contact angle measurements and oil/water separation tests. Oil absorption tests revealed that the blended LCBPP/POE foam has a higher oil absorption capacity than that of the pure LCBPP foam. The cyclic oil absorption tests demonstrated the outstanding ductility and recoverability of the LCBPP/POE open-cell foam in comparison to those of the pure LCBPP foam. Over 10 cycles, the LCBPP/POE foam maintained a substantial adsorption capacity, retaining 99.3% of its initial oil absorption capacity. With its notable features, including a high open cell content, excellent hydrophobic and lipophilic characteristics, superior oil absorption capacity, impressive cyclic oil absorption performance, and robust reusability, LCBPP/POE open-cell foams exhibit significant promise as potential oil adsorbents for use in oil spill cleanup applications.

A polymer tethering strategy to achieve high metal loading on catalysts for Fenton reactions.

The development of heterogenous catalysts based on the synthesis of 2D carbon-supported metal nanocatalysts with high metal loading and dispersion is important. However, such practices remain challenging to develop. Here, we report a self-polymerization confinement strategy to fabricate a series of ultrafine metal embedded N-doped carbon nanosheets (M@N-C) with loadings of up to 30 wt%. Systematic investigation confirms that abundant catechol groups for anchoring metal ions and entangled polymer networks with the stable coordinate environment are essential for realizing high-loading M@N-C catalysts. As a demonstration, Fe@N-C exhibits the dual high-efficiency performance in Fenton reaction with both impressive catalytic activity (0.818 min-1) and H2O2 utilization efficiency (84.1%) using sulfamethoxazole as the probe, which has not yet been achieved simultaneously. Theoretical calculations reveal that the abundant Fe nanocrystals increase the electron density of the N-doped carbon frameworks, thereby facilitating the continuous generation of long-lasting surface-bound •OH through lowering the energy barrier for H2O2 activation. This facile and universal strategy paves the way for the fabrication of diverse high-loading heterogeneous catalysts for broad applications.

Highly Stable Supercapacitors Enabled by a New Conducting Polymer Complex PEDOT:CF3 SO2(x) PSS(1-x).

Herein, a novel conducting polymer complex PEDOT:CF3 SO2(x) PSS(1-x) [denoted as S-PEDOT:CF3 SO2(x) PSS(1-x) , where PEDOT is poly(3,4-ethylenedioxythiophene) and PSS is poly(styrene sulfonate)], is fabricated with the assistance of zinc di[bis(trifluoromenthylsulfonyl) imide][Zn(TFSI)2 ] (CFE). The introduction of CF3 SO2 - group is expected to bring better stability of PEDOT:CF3 SO2 than PEDOT:PSS due to its strong Coulomb force. Electrochemical measurement shows that a high specific capacitance of 194 F cm-3 was achieved from the novel complex S-PEDOT:CF3 SO2(x) PSS(1-x) , the highest value reported so far. An all-solid-state supercapacitor assembly with a structure of S-PEDOT:CF3 SO2(x) PSS(1-x) /H2 SO4 :polyvinyl alcohol (PVA)/S-PEDOT:CF3 SO2(x) PSS(1-x) shows a record specific capacitance of 70.9 F cm-3 and a maximum energy density of 6.02 mWh cm-3 at a power density of 397 mW cm-3 . This supercapacitor device demonstrates excellent electrochemical stability with a capacitance retention rate of 98 % after 10 000 cycles and extreme air stability of 96 % capacitance retention rate after 10 000 cycles, even if the device is exposed to air over 2880 h, much better than that of PEDOT:PSS based supercapacitors. Excellent capacitance can be achieved from PEDOT:CF3 SO2(x) PSS(1-x) electrode under electrolyte-free conditions. This work provides a novel method for high performance stable supercapacitors and may pave the way for the commercialization of PEDOT based supercapacitors.

The effective removal of Pb2+ by activated carbon fibers modified by l-cysteine: exploration of kinetics, thermodynamics and mechanism.

Herein, we developed a low-cost fabrication route to prepare chemically grafted activated carbon fibers, which effectively removed Pb2+ from solution. Multiple characteristic results indicated that l-cyst-ACF had abundant nitrogen-containing and sulfur-containing functional groups. Based on the XPS and EDS analyses, the capture of Pb2+ was attributed to the abundant adsorption sites on the fiber surface. According to the analysis of the pseudo-second-order kinetic model and the Langmuir isotherm model, the adsorption process could be interpreted as monolayer adsorption and chemisorption, and the equilibrium adsorption capacity was determined to be 136.80 mg g-1 by fitting the pseudo-second-order kinetic model. The maximum adsorption capacity of l-cyst-ACF for Pb2+ was calculated to be 179.53 mg g-1 using the Langmuir model. In addition, the adsorption reaction was endothermic and spontaneous, as evidenced by the thermodynamic parameters. The outcomes of this study provide a low-cost and feasible strategy for the remediation of Pb2+ pollution in the environment.

Porous boron nitride intercalated zero-valent iron particles for highly efficient elimination of organic contaminants and Cr (VI).

Developing novel bifunctional materials to high efficiently degrade organic pollutants and eliminate hexavalent chromium (Cr (VI)) is significantly desired in the wastewater treatment field. The porous boron nitride (p-BN) was fabricated by a two-stage calcination strategy and was innovatively employed to support zero-valent iron (ZVI), achieving the bifunctional material (p-BN@ZVI) to degrade carbamazepine (CBZ) and eliminate Cr (VI). p-BN@ZVI could degrade more than 98% CBZ in 6 min with the high apparent first-order constant (kobs) of 0.536 min-1, almost 5 times higher than that of the ZVI/PMS system and outperformed most previous reported ZVI supported catalysts, which was mainly ascribed to the fact that the introduction of p-BN with high surface area (793.97 m2/g) improved the dispersion of ZVI and exposed more active sites. Quenching tests coupled with electron paramagnetic resonance (EPR) suggested that •OH was the major reactive oxygen species with a contribution of 71.6%. Notably, the p-BN@ZVI/PMS system expressed low activation energy of 8.23 kJ/mol and reached a 65.69% TOC degradation in 20 min even at 0 °C. p-BN@ZVI possessed remarkable storage stability and could still degrade 92.3% CBZ despite three-month storage. More interestingly, p-BN@ZVI was capable to eliminate 98.1% of 50 mg/L Cr (VI) within 5 min through adsorption and reduction, where nearly 80% Cr (VI) was transformed to Cr (III), and exhibited the maximum Cr (VI) elimination capacity of 349 mg/g. This study provides new insights into the efficient organic contaminants degradation and Cr (VI) elimination in the treatment of wastewater.