RESUMEN
Under damp or aquatic conditions, the corrosion products deposited on micro-cracks/pore sites bring about the failure of intrinsically healable organic coatings. Inspired by mussels, a composite coating of poly (methyl methacrylate-co-butyl acylate-co-dopamine acrylamide)/phenylalanine-functionalized boron nitride (PMBD/BN-Phe) is successfully prepared on the reinforcing steel, which exhibits excellent anti-corrosion and underwater self-healing capabilities. The self-healing property of PMBD is derived from the synergistic effect of hydrogen bonding and metal-ligand coordination bonding, and thereby the continuous generation of corrosion products can be significantly suppressed through in situ capture of cations by the catechol group. Furthermore, the corrosion protection ability can be remarkably improved by the labyrinth effect of BN and the inhibition role of Phe, and the desired interfacial compatibility can be formed by the hydrogen bonds between BN-Phe and PMBD matrix. The corrosion current density (icorr) of PMBD/BN-Phe coating is determined as 7.95 × 10-11 A cm-2. The low-frequency impedance modulus (|Z|f = 0.0 1 Hz is remained at 3.47 × 109 Ω cm2, indicating an ultra-high self-healing efficiency (≈89.5%). It is anticipated to provide a unique strategy for development of an underwater self-healing coating and robust durability for application in anti-corrosion engineering of marine buildings.
RESUMEN
The process parameters of selective laser melting (SLM) significantly influence molten pool formation. A comprehensive understanding and analysis, from a macroscopic viewpoint, of the mechanisms underlying these technological parameters and how they affect the evolution of molten pools are presently lacking. In this study, we established a dynamic finite element simulation method for the process of molten pool formation by SLM using a dynamic moving heat source. The molten pool was generated, and the dynamic growth process of the molten pool belt and the evolution process of the thermal field of the SLM molten pool were simulated. Then, a deposition experiment that implemented a new measurement method for online monitoring involving laser supplementary light was conducted using the same process parameters as the simulation, in which high-speed images of the molten pool were acquired, including images of the pool surface and cross-section images of the deposited samples. The obtained experimental results show a good agreement with the simulation results, demonstrating the effectiveness of the proposed algorithm.
RESUMEN
With the application of Selective Laser Melting (SLM) technology becoming more and more widespread, it is important to note the process parameters that have a very important effect on the forming quality. Key process parameters such as laser power (P), scan speed (s), and scanning strategy (µ) were investigated by determining the correlation between the microstructure and residual stress in this paper. A total of 10 group 316L specimens were fabricated using SLM for comprehensive analysis. The results show that the key process parameters directly affect the morphology and size of the molten pool in the SLM deposition, and the big molten pool width has a direct effect on the larger grain size and crystal orientation distribution. In addition, the larger grain size and misorientation angle also affect the size of the residual stress. Therefore, better additive manufacturing grain crystallization can be obtained by reasonably adjusting the process parameter combinations. The transfer energy density can synthesize the influence of four key process parameters (P, v, the hatching distance (δ), and the layer thickness (h)). In this study, it is proposed that the accepted energy density will reflect the influence of five key process parameters, including the scanning trajectory (µ), which can reflect the comprehensive effect of process parameters more accurately.