Selenium nanoparticle prepared by femtosecond laser-induced plasma shock wave.

A novel approach for the production of both amorphous and crystalline selenium nanoparticles (SeNPs) using femtosecond laser-induced plasma shock wave on the surface of Bi2Se3 topological insulators at room temperature and ambient pressure is demonstrated. The shape and size of SeNPs can be reliably controlled via the kinetic energy obtained from laser pulses, so these are applicable as active components in nanoscale applications. Importantly, the rapid, low-cost and eco-friendly synthesis strategy developed in this study could also be extendable to other systems.

Enhance high harmonic generation (HHG) efficiency via compact multi-plate continuum post-compression for time-resolved angle-resolved photoemission spectroscopy.

Time-resolved angle-resolved photoemission spectroscopy (Tr-APRES) gives direct insight into electron dynamics by providing temporal-, energy-, and momentum-resolved information in one experiment. A major obstacle to using high harmonic generation (HHG) probe pulses for photoemission spectroscopy is the low conversion efficiency, that is, the low flux of probe photons. We use a Yb-KGW based duo-laser source with an oscillator to pump two separate amplifiers and generate two synchronized pulsed laser sources with average energies of 7.5 and 6 W. By using the multiplate continuum method and chirped mirrors, the resulting flux of HHG photons at 33-70 eV can be increased 50-fold (up to 1011 photons/s) by using post-compressed 30 fs pulses compared with the photon flux generated by the fundamental 190 fs pulses. Moreover, pulses from the 6 W amplifier are used to pump an optical parametric amplifier that can vary the wavelengths for photoexcitation. The system performance is demonstrated by applying Tr-ARPES to single-crystal graphite. The front tilt broadening is significantly suppressed by the off-plane mounted conical grating, leading to a 184 fs temporal resolution that is mainly limited by the pump pulse. The energy resolution is 176 meV.

Atomic-Layer Controlled Interfacial Band Engineering at Two-Dimensional Layered PtSe2/Si Heterojunctions for Efficient Photoelectrochemical Hydrogen Production.

Platinum diselenide (PtSe2) is a group-10 two-dimensional (2D) transition metal dichalcogenide that exhibits the most prominent atomic-layer-dependent electronic behavior of "semiconductor-to-semimetal" transition when going from monolayer to bulk form. This work demonstrates an efficient photoelectrochemical (PEC) conversion for direct solar-to-hydrogen (H2) production based on 2D layered PtSe2/Si heterojunction photocathodes. By systematically controlling the number of atomic layers of wafer-scale 2D PtSe2 films through chemical vapor deposition (CVD), the interfacial band alignments at the 2D layered PtSe2/Si heterojunctions can be appropriately engineered. The 2D PtSe2/p-Si heterojunction photocathode consisting of a PtSe2 thin film with a thickness of 2.2 nm (or 3 atomic layers) exhibits the optimized band alignment and delivers the best PEC performance for hydrogen production with a photocurrent density of -32.4 mA cm-2 at 0 V and an onset potential of 1 mA cm-2 at 0.29 V versus a reversible hydrogen electrode (RHE) after post-treatment. The wafer-scale atomic-layer controlled band engineering of 2D PtSe2 thin-film catalysts integrated with the Si light absorber provides an effective way in the renewable energy application for direct solar-to-hydrogen production.

Femtosecond time-evolution of mid-infrared spectral line shapes of Dirac fermions in topological insulators.

Mid-infrared (MIR) light sources have much potential in the study of Dirac-fermions (DFs) in graphene and topological insulators (TIs) because they have a low photon energy. However, the topological surface state transitions (SSTs) in Dirac cones are veiled by the free carrier absorption (FCA) with same spectral line shape that is always seen in static MIR spectra. Therefore, it is difficult to distinguish the SST from the FCA, especially in TIs. Here, we disclose the abnormal MIR spectrum feature of transient reflectivity changes (ΔR/R) for the non-equilibrium states in TIs, and further distinguish FCA and spin-momentum locked SST using time-resolved and linearly polarized ultra-broadband MIR spectroscopy with no environmental perturbation. Although both effects produce similar features in the reflection spectra, they produce completely different variations in the ΔR/R to show their intrinsic ultrafast dynamics.

Ultrafast carrier dynamics in Ge by ultra-broadband mid-infrared probe spectroscopy.

In this study, we carried out 800-nm pump and ultra-broadband mid-infrared (MIR) probe spectroscopy with high time-resolution (70 fs) in bulk Ge. By fitting the time-resolved difference reflection spectra [ΔR(ω)/R(ω)] with the Drude model in the 200-5000 cm-1 region, the time-dependent plasma frequency and scattering rate have been obtained. Through the calculation, we can further get the time-dependent photoexcited carrier concentration and carrier mobility. The Auger recombination essentially dominates the fast relaxation of photoexcited carriers within 100 ps followed by slow relaxation due to diffusion. Additionally, a novel oscillation feature is clearly found in time-resolved difference reflection spectra around 2000 cm-1 especially for high pump fluence, which is the Lorentz oscillation lasting for about 20 ps due to the Coulomb force exerted just after the excitation.

Experimental realization of ultrathin, double-sided metamaterial perfect absorber at terahertz gap through stochastic design process.

We design and demonstrate a flexible, ultrathin and double-sided metamaterial perfect absorber (MPA) at 2.39 terahertz (THz), which enables excellent light absorbance under incidences from two opposite sides. Herein, the MPA is fabricated on a λ0/10.1-thick flexible polyethylene terephthalate substrate of εr = 2.75 × (1 + 0.12i), sandwiched by two identical randomized metallic patterns by our stochastic design process. Such an MPA provides tailored permittivity and permeability to approach the impedance of free space for minimizing reflectance and a great imaginary part of the refractive index for reducing transmittance and finally results in high absorbance. Both experimental measurement and numerical simulation are in a good agreement. The flexible, ultrathin and double-sided MPA significantly differs from traditional quarter-wavelength absorbers and other single-sided perfect absorbers, paving a way toward practical THz applications in thermal emission, sensing and imaging, communications, stealth technique, and even energy harvesting.

Manifestation of a Second Dirac Surface State and Bulk Bands in THz Radiation from Topological Insulators.

Topological insulators (TIs) are interesting quantum matters that have a narrow bandgap for bulk and a Dirac-cone-like conducting surface state (SS). The recent discovered second Dirac surface state (SS) and bulk bands (BBs) located ~1.5 eV above the first SS are important for optical coupling in TIs. Here, we report on the time-domain measurements of THz radiation generated from TIs n-type Cu(0.02)Bi2Se3 and p-type Bi2Te3 single crystals by ultrafast optical pulse excitation. The observed polarity-reversal of the THz pulse originated from transient current is unusual, and cannot be reconciled with the photo-Dember effect. The second SS and BBs are found to be indispensable for the explanation of the unusual phenomenon. Thanks to the existence of the second SS and BBs, TIs manifest an effective wide band gap in THz generation. The present study demonstrates that time-domain THz spectroscopy provide rich information of the optical coupling and the electronic structure of TIs.