RESUMEN
We observed the small-size-induced hardening and plasticity of brittle ionic MgO as a result of abnormally triggered dislocation gliding on a non-charge-balanced slip system. The indentation tests of ⟨111⟩ MgO pillars revealed an increased hardness with decreasing pillar size, and the tips of the pillars that were ≤200 nm were plastically deformed. The in situ compression tests of ⟨111⟩ MgO nanopillars in transmission electron microscopy verified aligned dislocation-mediated plasticity on the {111}⟨110⟩ and {100}⟨110⟩ systems rather than the charge-balanced {110}⟨110⟩ slip system.
RESUMEN
Challenges associated with drug-releasing stents used in percutaneous transluminal coronary angioplasty (PTCA) encompass allergic reactions, prolonged endothelial dysfunction, and delayed stent clotting. Although absorbable stents made from magnesium alloys seem promising, fast in vivo degradation and poor biocompatibility remain major challenges. In this study, zirconia (ZrO2) layers were used as the foundational coat, while calcium phosphate (CaP) served as the surface layer on unalloyed magnesium specimens. Consequently, the corrosion current density was decreased to 3.86, from 13.3 µA/cm2. Moreover, a heparin-controlled release mechanism was created by co-depositing CaP, gelatin (Gel), and heparin (Hep) on the specimens coated with CaP/ZrO2, thereby boosting magnesium's blood compatibility and prolonging the heparin-releasing time. Techniques like X-ray diffractometry (XRD), focused ion beam (FIB) system, toluidine blue testing, UV-visible spectrometry, field emission scanning electron microscopy (FESEM), and surrogate tests for endothelial cell viability were employed to examine the heparin-infused coatings. The drug content rose to 484.19 ± 19.26 µg/cm2 in multi-layered coatings (CaP-Gel-Hep/CaP-Hep/CaP/ZrO2) from 243.56 ± 55.18 µg/cm2 in a single layer (CaP-Hep), with the controlled release spanning beyond 28 days. Also, cellular viability assessments indicated enhanced biocompatibility of the coated samples relative to those without coatings. This suggests the potential of magnesium samples after coating ZrO2 and CaP with Gel as candidates for porous biodegradable stents or even scaffolds in biomedical applications.
RESUMEN
CdSe/CdS with ZnS/ZnO shell quantum dots (QDs) are synthesized by a one-pot method with various oleylamine (OLA) contents. The crystal structures of the QDs were analyzed by X-ray diffractometry, which showed ZnS diffraction peaks. It was represented that the ZnS shell was formed on the surface of the CdSe/CdS core. Interestingly, QDs with a high OLA concentration exhibit diffraction peaks of ZnS/ZnO. As a result, the thermal stability of QDs with ZnS/ZnO shells exhibits better performance than those with ZnS shells. In addition, the photoluminescence intensity of QDs with ZnS/ZnO shells shows a relatively slow decay of 7.1% compared with ZnS shells at 85 °C/85% relative humidity aging test for 500 h. These indicate that QDs with different OLA modifications can form ZnS/ZnO shells and have good stability in a harsh environment. The emission wavelength of QDs can be tuned from 505 to 610 nm, suitable for micro-LED display applications.
RESUMEN
Three corrosion potentials and three corrosion current densities are clearly identified before the passivation for both dynamic polarization curves of equimolar CoCrFeNi high-entropy alloy (HEA) and 304 stainless steel (304SS) in 0.5 M H2SO4 aerated aqueous solution, by decomposing anodic and cathodic polarization curves. The passivated current density of the former is greater than the latter, compliant with not only the constant of solubility product (ksp) and redox equilibrium potential (Eeq) of each metal hydroxide but also the sequence of bond energy (Eb) for monolayer hydroxide on their facets derived from the first principle founded on density function theory. However, the total amount of ion releasing from HEA is less than 304SS, since the hydroxide/oxide film formed in the air of the latter containing greater amounts of Fe(â ¡) and Mn(â ¡) is less stable around corrosion potentials while they are further oxidized into more stable Fe(â ¢) and Mn(â ¢orâ £) with much lower ksp, leading to the much less increasing ratios of ion releases from 0.25 to 0.6 V.
RESUMEN
Two-dimensional transition-metal carbides and nitrides (MXenes) have been regarded as promising sensing materials because of their high surface-to-volume ratios and outstanding electronic, optical, and mechanical properties with versatile transition-metal and surface chemistries. However, weak gas-molecule adsorption of MXenes poses a serious limitation to their sensitivity and selectivity, particularly for trace amounts of volatile organic compounds (VOCs) at room temperature. To deal with these issues, Au-decorated MXenes are synthesized by a facile solution mixing method for room-temperature sensing of a wide variety of oxygen-based and hydrocarbon-based VOCs. Dynamic sensing experiments reveal that optimal decoration of Au nanoparticles (NPs) on Ti3C2T x MXene significantly elevates the response and selectivity of the flexible sensors, especially in detecting formaldehyde. Au-Ti3C2T x gas sensors exhibited an extremely low limit of detection of 92 ppb for formaldehyde at room temperature. Au-Ti3C2T x provides reliable gas response, low noise level, ultrahigh signal-to-noise ratio, high selectivity, as well as parts per billion level of formaldehyde detection. The prominent mechanism for Au-Ti3C2T x in sensing formaldehyde is elucidated theoretically from density functional theory simulations. The results presented here strongly suggest that decorating noble-metal NPs on MXenes is a feasible strategy for the development of next-generation ultrasensitive sensors for Internet of Things.
RESUMEN
It is generally known that a layer of amorphous silicon oxide (SiO2) naturally exists on the surface of silicon, resulting in the growth of gallium oxide (Ga2O3) that is no longer affected by substrate crystallinity during sputtering. This work highlights the formation energy between the native amorphous nano-oxide film formed on the Si substrate and monoclinic ß-Ga2O3 dominating the preferred orientation prepared for deep ultraviolet photodetectors. The latter were deposited on p-type silicon (p-Si) with (111) orientation using radio frequency sputtering at 600 °C and post rapid thermal annealing (RTA). The X-ray diffraction (XRD) results indicate both as-deposited and postannealing films with the (400) preferred orientation for a layer thickness of 100 nm. However, slight random orientation with the amorphous structure is mixed in the preferred one for the as-deposited film with a thickness of 200 nm and reduced after being annealed at 800 °C, which is observed by XRD and transmission electron microscopy. Meanwhile, thermal-induced massive twin boundaries (TBs) and stacking faults (SFs) were generated when annealed at 1000 °C, owing to the relaxation of lattice strain by the coherent interface. The interfacial bonding energy per unit area (E i) between ß-Ga2O3 films with various facets ((001), (010), (100), and (2Ì 01)) and amorphous SiO2 was calculated using density functional theory. The E i of ß-Ga2O3 (100)/SiO2 reveals the highest value (0.289 eV/Å2), which is consistent with the (100) preferred orientation of deposited films. The (100) preferred orientation is the driving force for TBs and SFs. The discrimination of responsivities and the photo/dark current contrast ratio (I ph/I dark) are inversely proportional to the amorphous structure, grain boundaries, TBs, and SFs. Therefore, optimum metal-semiconductor-metal photodetector performance is achieved for RTA-treated samples at 800 °C with an I ph/I dark of 3.91 × 102 and a responsivity of 0.702 A/W (λpeak = 230 nm) at 5 V bias for a 200 nm thin film.
RESUMEN
The mechanism of carrier recombination in downsized µ-LED chips from 100 × 100 to 10 × 10 µm2 on emission performance was systemically investigated. All photolithography processes for defining the µ-LED pattern were achieved by using a laser direct writing technique. This maskless technology achieved the glass-mask-free process, which not only can improve the exposure accuracy but also save the development time. The multi-functional SiO2 film as a passivation layer successfully reduced the leakage current density of µ-LED chips compared with the µ-LED chips without passivation layer. As decreasing the chip size to 10 × 10 µm2, the smallest chip size exhibited the highest ideality factor, which indicated the main carrier recombination at the high-defect-density zone in µ-LED chip leading to the decreased emission performance. The blue-shift phenomenon in the electroluminescence spectrum with decreasing the µ-LED chip size was due to the carrier screening effect and the band filling effect. The 10 × 10 µm2 µ-LED chip exhibited high EQE values in the high current density region with a less efficiency droop, and the max-EQE value was 18.8%. The luminance of 96 × 48 µ-LED array with the chip size of 20 × 20 µm2 exhibited a high value of 516 nits at the voltage of 3 V.
RESUMEN
Two-dimensional (2D) transition-metal carbides (Ti3C2Tx MXene) have received a great deal of attention for potential use in gas sensing showing the highest sensitivity among 2D materials and good gas selectivity. However, one of the long-standing challenges of the MXenes is their poor stability against hydration and oxidation in a humid environment, limiting their long-term storage and applications. Integration of an effective protection layer with MXenes shows promise for overcoming this major drawback. Herein, we demonstrate a surface functionalization strategy for Ti3C2Tx with fluoroalkylsilane (FOTS) molecules through surface treatment, providing not only a superhydrophobic surface, mechanical/environmental stability but also enhanced sensing performance. The experimental results show that high sensitivity, good repeatability, long-term stability, and selectivity and faster response/recovery property were achieved by the FOTS-functionalized when Ti3C2Tx was integrated into chemoresistive sensors sensitive to oxygen-containing volatile organic compounds (ethanol, acetone). FOTS functionalization provided protection to sensing response when the dynamic response of the Ti3C2Tx-F sensor to 30 ppm of ethanol was measured over in the 5 to 80% relative humidity range. Density functional theory simulations suggested that the strong adsorption energy of ethanol on Ti3C2Tx-F and the local structure deformation induced by ethanol adsorption, contributing to the gas-sensing enhancement. This study offers a facile and practical solution for developing highly reliable MXene based gas-sensing devices with response that is stable in air and in the presence of water.
RESUMEN
Semiconducting two-dimensional (2D) transition-metal dichalcogenides (TMDCs) are considered promising sensing materials due to the high surface-to-volume ratio and active sensing sites. However, the reported strategies for 2D TMDCs toward sensing of volatile organic compounds (VOCs) present with some drawbacks. These include high operation temperatures, low gas response, and complex fabrication, limiting the development of room-temperature gas sensors. In this study, 2D MoS2 nanoflakes were prepared by liquid-phase exfoliation, and their surface was functionalized with Au nanoparticles (NPs) through a facile solution mixing method. MoS2 decorated with Au NPs with an average size of 10 nm was used as a material platform for an electrochemical sensor to detect a wide variety of VOCs at room temperature. Through dynamic sensing tests, the enhancement of gas-sensing performance in terms of response and selectivity, especially in detecting oxygen-based VOCs (acetone, ethanol, and 2-propanol), was demonstrated. After Au functionalization, the response of the gas sensor to acetone improved by 131% (changing from 13.7% for pristine MoS2 to 31.6% for MoS2-Au(0.5)). Sensing tests under various relative humidity values (10-80%), bending or long-term conditions, indicated the sound robustness and flexibility of the sensor. Density functional theory simulations suggested that the adsorption energy of VOC molecules on MoS2-Au is significantly higher than that on pristine MoS2, contributing to the gas-sensing enhancement; a VOC-sensing mechanism for Au-decorated MoS2 nanoflakes was proposed for the first time for the highly sensitive and selective detection of oxygen-based VOCs.