Disease-induced changes in bacterial and fungal communities from plant below- and aboveground compartments.

The plant microbes are an integral part of the host and play fundamental roles in plant growth and health. There is evidence indicating that plants have the ability to attract beneficial microorganisms through their roots in order to defend against pathogens. However, the mechanisms of plant microbial community assembly from below- to aboveground compartments under pathogen infection remain unclear. In this study, we investigated the bacterial and fungal communities in bulk soil, rhizosphere soil, root, stem, and leaf of both healthy and infected (Potato virus Y disease, PVY) plants. The results indicated that bacterial and fungal communities showed different recruitment strategies in plant organs. The number and abundance of shared bacterial ASVs between bulk and rhizosphere soils decreased with ascending migration from below- to aboveground compartments, while the number and abundance of fungal ASVs showed no obvious changes. Field type, plant compartments, and PVY infection all affected the diversity and structures of microbial community, with stronger effects observed in the bacterial community than the fungal community. Furthermore, PVY infection, rhizosphere soil pH, and water content (WC) contributed more to the assembly of the bacterial community than the fungal community. The analysis of microbial networks revealed that the bacterial communities were more sensitive to PVY infection than the fungal communities, as evidenced by the lower network stability of the bacterial community, which was characterized by a higher proportion of positive edges. PVY infection further increased the bacterial network stability and decreased the fungal network stability. These findings advance our understanding of how microbes respond to pathogen infections and provide a rationale and theoretical basis for biocontrol technology in promoting sustainable agriculture. KEY POINTS: • Different recruitment strategies between plant bacterial and fungal communities. • Bacterial community was more sensitive to PVY infection than fungal community. • pH and WC drove the microbial community assembly under PVY infection.

Transport Behavior of Cd2+ in Highly Weathered Acidic Soils and Shaping in Soil Microbial Community Structure.

The mining and smelting site soils in South China present excessive Cd pollution. However, the transport behavior of Cd in the highly weathered acidic soil layer at the lead-zinc smelting site remains unclear. Here, under different conditions of simulated infiltration, the migration behavior of Cd2+ in acid smelting site soils at different depths was examined. The remodeling effect of Cd2+ migration behavior on microbial community structure and the dominant microorganisms in lead-zinc sites soils was analyzed using high-throughput sequencing of 16S rRNA gene amplicons. The results revealed a specific flow rate in the range of 0.3-0.5 mL/min that the convection and dispersion have no obvious effect on Cd2+ migration. The variation of packing porosity could only influence the migration behavior by changing the average pore velocity, but cannot change the adsorption efficiency of soil particles. The Cd has stronger migration capacity under the reactivation of acidic seepage fluid. However, in the alkaline solution, the physical properties of soil, especially pores, intercept the Cd compounds, further affecting their migration capacity. The acid-site soil with high content of SOM, amorphous Fe oxides, crystalline Fe/Mn/Al oxides, goethite, and hematite has stronger ability to adsorb and retain Cd2+. However, higher content of kaolinite in acidic soil will increase the potential migration of Cd2+. Besides, the migration behavior of Cd2+ results in simplified soil microbial communities. Under Cd stress, Cd-tolerant genera (Bacteroides, Sphingomonas, Bradyrhizobium, and Corynebacterium) and bacteria with both acid-Cd tolerance (WCHB 1-84) were distinguished. The Ralstonia showed a high enrichment degree in alkaline Cd2+ infiltration solution (pH 10.0). Compared to the influence of Cd2+ stress, soil pH had a stronger ability to shape the microbial community in the soil during the process of Cd2+ migration.

Viruses Regulate Microbial Community Assembly Together with Environmental Factors in Acid Mine Drainage.

Viruses are widespread in various ecosystems, and they play important roles in regulating the microbial community via host-virus interactions. Recently, metagenomic studies showed that there are extremely diverse viruses in different environments from the ocean to the human gut, but the influences of viral communities on microbial communities are poorly understood, especially in extreme environments. Here, we used metagenomics to characterize microbial communities and viral communities in acid mine drainage (AMD) and evaluated how viruses shape microbial community constrained by the harsh environments. Our results showed that AMD viral communities are significantly associated with the microbial communities, and viral diversity has positive correlations with microbial diversity. Viral community explained more variations of microbial community composition than environmental factors in AMD of a polymetallic mine. Moreover, we found that viruses harboring adaptive genes regulate a relative abundance of hosts under the modulation of environmental factors, such as pH. We also observed that viral diversity has significant correlations with the global properties of microbial cooccurrence networks, such as modularity. In addition, the results of null modeling analyses revealed that viruses significantly affect microbial community phylogeny and play important roles in regulating ecological processes of community assembly, such as dispersal limitation and homogenous dispersal. Together, these results revealed that AMD viruses are critical forces driving microbial network and community assembly via host-virus interactions. IMPORTANCE Viruses as mobile genetic elements play critical roles in the adaptive evolution of their hosts in extreme environments. However, how viruses further influence microbial community structure and assembly is still unclear. A recent metagenomic study observed diverse viruses unexplored in acid mine drainage, revealing the associations between the viral community and environmental factors. Here, we showed that viruses together with environmental factors can constrain the relative abundance of host and microbial community assembly in AMD of copper mines and polymetallic mines. Our results highlight the importance of viruses in shaping the microbial community from the individual host level to the community level.

Multiomics provides insights into the succession of microbiota and metabolite during plant leaf fermentation.

The quality of fermented plant products is closely related to microbial metabolism. Here, the associations of bacterial communities, metabolites, and functional genes were explored using multi-omics techniques based on plant leaf fermentation systems. The results showed significant changes in the structure of the microbial community, with a significant decrease in Firmicutes and a significant increase in Proteobacteria. In addition, the concentration of metabolites with antibacterial, antioxidant and aroma properties increased significantly, enhancing the quality of the fermented plant leaves. Integrated macrogenomic and metabolomic analyses indicated that amino acid metabolism could be key metabolic pathway affecting fermentation quality. Actinobacteria, Proteobacteria, Firmicutes were actively involved in tyrosine metabolism (ko00350) and phenylalanine metabolism (ko00360), and are presumed to be the major groups responsible for synthesizing growth and flavor compounds. This study emphasized the important role of microorganisms in the changes of metabolites during the fermentation of plant leaves.

Inoculation with thermophiles enhanced the food waste bio-drying and complicated interdomain ecological networks between bacterial and fungal communities.

Bio-drying is a practical approach for treating food waste (FW). However, microbial ecological processes during treatment are essential for improving the dry efficiency, and have not been stressed enough. This study analyzed the microbial community succession and two critical periods of interdomain ecological networks (IDENs) during FW bio-drying inoculated with thermophiles (TB), to determine how TB affects FW bio-drying efficiency. The results showed that TB could rapidly colonize in the FW bio-drying, with the highest relative abundance of 5.13%. Inoculating TB increased the maximum temperature, temperature integrated index and moisture removal rate of FW bio-drying (55.7 °C, 219.5 °C, and 86.11% vs. 52.1 °C, 159.1 °C, and 56.02%), thereby accelerating the FW bio-drying efficiency by altering the succession of microbial communities. The structural equation model and IDEN analysis demonstrated that TB inoculation complicated the IDENs between bacterial and fungal communities by significantly and positively affecting bacterial communities (b = 0.39, p < 0.001) and fungal communities (b = 0.32, p < 0.01), thereby enhancing interdomain interactions between bacteria and fungi. Additionally, inoculation TB significantly increased the relative abundance of keystone taxa, including Clostridium sensu stricto, Ochrobactrum, Phenylobacterium, Microvirga and Candida. In conclusion, the inoculation of TB could effectively improve FW bio-drying, which is a promising technology for rapidly reducing FW with high moisture content and recovering resources from it.

Optimizing SCND with carbon-rich hydrolysates from typical organic wastes: Material composition, augmentation performance, microbiome response, and life cycle impact.

The rapid growth of production and consumption has led to severe environmental pollution, creating a major challenge to achieving the United Nations' sustainable development goals (SDGs). To address it, recycling of organic wastes into value-added products is a possible solution. In this work, four typical organic wastes including sewage sludge (SS), chicken manure (CM), food waste (FW), and corn straw (CS) were employed to produce hydrolysates augmenting shortcut nitrification-denitrification (SCND) for nitrogen depletion in wastewater. The hydrolysates were carbon-rich, with total COD (TCOD), soluble COD (SCOD), and volatile fatty acids (VFA) concentrations ranging from 32.5 to 102.7, 5.7 to 48.4, and 2.0-16.5 mg/L, respectively. The most effective nitrogen depletion was obtained in units supplemented with CM and FW hydrolysates, which had reduced average NH3-N concentrations and near-zero TN removal failure rates under legal requirements. The microbial community analysis demonstrated that various functional bacteria from phylum to genus level were detected in all scenarios, which was corroborated by abundant genetic functions involved in nitrogen metabolism. Further, life cycle assessment revealed negative environmental impact on all categories, with an exception of eutrophication potential (EP) with negative values (∼-0.04 kg Phosphate eq.), allowing positive net environmental benefit (NEB). Operational cost analysis revealed that CM and FW are more effective but costlier than SS and CS. Together, these results indicate that, after hydrolysis, organic wastes can be efficient stimulant augmenting SCND performance for nitrogen depletion in wastewater, benefiting the overall environmental impact.

Alicyclobacillus curvatus sp. nov. and Alicyclobacillus mengziensis sp. nov., two acidophilic bacteria isolated from acid mine drainage.

Two acidophilic strains, designated as ALEF1T and S30H14T, were isolated from acid mine drainage sediment. Cells of both strains were Gram-stain-positive, aerobic, endospore-forming rods. Strains ALEF1T and S30H14T were acidophilic and mesophilic, the former grew at 20-40 °C (optimum, 30 °C) and pH 2.5-4.5 (optimum, pH 3.5), while the latter grew at 20-45 °C (optimum, 30 °C) and pH 2.0-5.5 (optimum, pH 4.5). The 16S rRNA gene-based sequence analysis revealed that strains ALEF1T and S30H14T belonged to the genus Alicyclobacillus, and were phylogenetically close to Alicyclobacillus ferrooxydans TC-34T with 97.1 and 97.4% similarity, respectively. The similarity between the two novel strains was 98.6 %. The average nucleotide identity value between the genome sequences of ALEF1T and S30H14T was 79.5 %, and that between each of the two isolates and A. ferrooxydans TC-34T were 72.0 and 74.3 %. In addition, the digital DNA-DNA hybridization value between ALEF1T and S30H14T was 24.9 %, between strain ALEF1T and A. ferrooxydans TC-34T was 21.7 %, and between S30H14T and A. ferrooxydans TC-34T was 26.3 %, far below the interspecies threshold. Both strains could utilize diverse carbon sources for heterotrophic growth; strain ALEF1T could utilize ferrous iron as the energy source for autotrophic growth. Menaquinone 7 was the only quinone detected in either strain. Both strains contained anteiso-C15 : 0 and anteiso-C17 : 0, while ω-alicyclic fatty acids were not detected. Based on their phylogenetic positions, as well as phenotypic and genomic data, it is considered that strains ALEF1T and S30H14T represent two novel species within the genus Alicyclobacillus, for which the names Alicyclobacillus curvatus sp. nov. (type strain ALEF1T=CGMCC 1.17055T=KCTC 43124T) and Alicyclobacillus mengziensis sp. nov. (S30H14T=CGMCC 1.17050T=KCTC 43125T) are proposed.

Soil microbial community assembly model in response to heavy metal pollution.

Heavy metal pollution affected the stability and function of soil ecosystem. The impact of heavy metals on soil microbial community and the interaction of microbial community has been widely studied, but little was known about the response of community assembly to the heavy metal pollution. In this study, we collected 30 soil samples from non (CON), moderately (CL) and severely (CH) contaminated fields. The prokaryotic community was studied using high-throughput Illumina sequencing of 16s rRNA gene amplicons, and community assembly were quantified using phylogenetic-bin-based null approach (iCAMP). Results showed that diversity and composition of both bacterial and archaeal community changed significantly in response to heavy metal pollution. The microbial community assembly tended to be more deterministic with the increase of heavy metal concentration. Among the assembly processes, the relative importance of homogeneous selection (deterministic process) increased significantly (increased by 16.2%), and the relative importance of drift and dispersal limitation (stochastic process) decreased significantly (decreased by 11.4% and 5.4%, respectively). The determinacy of bacterial and archaeal community assembly also increased with heavy metal stress, but the assembly models were different. The deterministic proportion of microorganisms tolerant to heavy metals, such as Thiobacillus, Euryarchaeota and Crenarchaeota (clustered in bin 32, bin59 and bin60, respectively) increased, while the stochastic proportion of microorganisms sensitive to heavy metals, such as Koribacteraceae (clustered in bin23) increased. Therefore, the heavy metal stress made the prokaryotic community be deterministic, however, the effects on the assembly process of different microbial groups differed obviously.

Metagenomic insight into the microbial degradation of organic compounds in fermented plant leaves.

Microbial degradation of organic compounds is an environmentally benign and energy efficient part in product processing. Fermentation of plant leaves involves enzymatic actions of many microorganisms. However, microbes and enzymes discovered from natural degradation communities were still limited by cultural methods. In this study, we used a metagenomics sequence-guided strategy to identify the microbes and enzymes involved in compound degradation and explore the potential synergy among community members in fermented tobacco leaves. The results showed that contents of protein, starch, pectin, lignin, and cellulose varied in fermented leaves from different growing sites. The different compound contents were closely related to taxonomic composition and functional profiles of foliar microbial communities. Microbial communities showed significant correlations with protein, lignin, and cellulose. Vital species for degradations of protein (Bacillus cereus and Terribacillus aidingensis), lignin (Klebsiella pneumoniae and Pantoea ananatis) and cellulose (Pseudomonas putida and Sphingomonas sp. Leaf20) were identified and relating hydrolytic enzymes were annotated. Further, twenty-two metagenome-assembled genomes (MAGs) were assembled from metagenomes and six potential cellulolytic genomes were used to reconstruct the cellulose-degrading process, revealing the potential metabolic cooperation related to cellulose degradation. Our work should deepen the understanding of microbial roles in plant fermentation and provide a new viewpoint for applying microbial consortia to convert plant organic components to small molecules.

Insights into the Interactions Between Root Phenotypic Traits and the Rhizosphere Bacterial Community.

The root phenotypic traits have been considered as important factors in shaping the rhizosphere microbiome and regulating plant growth. However, the relationships between root phenotypic traits and the rhizosphere bacterial community remain unclear. We investigated two fields with different developing tobacco roots by a long-term positioning test in Hengshi. The well-developed root system (WDR) showed much more superiority in root phenotypic traits, including total root length, total projection area, surface area, and root tip number, than the underdeveloped root system. The specific root traits in WDR provided more ecological niches for the rhizosphere microorganisms, contributing to a more diverse microbial community and a more complex microbial network. The total root length and root tip number were the key factors shaping bacterial communities in the rhizosphere. In turn, the phyla Acidobacteria and Bacteroidetes might play vital roles in modifying root development and promoting plant growth according to their positive correlation with root phenotypic traits. Linking root phenotypic traits to the microbiome may enhance our understanding of rhizospheric interactions and their roles in developing rhizosphere ecosystems.

Ecological responses of bacterial assembly and functions to steep Cd gradient in a typical Cd-contaminated farmland ecosystem.

The response of soil bacterial communities from farmland ecosystems to cadmium (Cd) pollution, in which a steep concentration gradient of more than 100 mg/kg has naturally formed, has not previously been fully reported. In this study, a field investigation was conducted in a typical severe Cd-polluted farmland ecosystem, and the bacterial community response to the steep Cd gradient was analyzed. The results showed that Cd concentration sharply decreased from 159.2 mg/kg to 4.18 mg/kg among four sampling sites alongside an irrigation canal over a distance of 150 m. Bacterial diversity and richness were significantly lower in highly polluted sites, and random forest analysis indicated that Cd gradient played a decisive role in reducing alpha diversity. Redundancy analysis (RDA) and co-occurrence network indicated that the synergistic effects of pH, Cd, and phosphorus were the main drivers shaping community structure. The functional results predicted by BugBase suggested that the bacterial community may adapt to the harsh environment by recruiting Cd-resistant microbes and improving oxidative stress tolerance of the whole community. Cd-resistant microorganisms such as Burkholderia, Bradyrhizobium, and Sulfurifustis, which directly or indirectly participate in diminishing oxidative damage of Cd, may play essential roles in maintaining community stability and might be potential bacterial resources for the bioremediation of Cd pollution.

Cadmium, lead and arsenic contamination in an abandoned nonferrous metal smelting site in southern China: Chemical speciation and mobility.

The investigation of chemical speciation of primary toxic metal(loid)s (Cd, Pb, and As) in soil profile in nonferrous metal smelting site is a key to the assessment of their mobility characteristics and formulation of subsequent remediation strategy. In this study, 74 soil samples were collected at 12 different soil profiles; soil physio-chemical properties and total content of Cd, Pb and As and corresponding chemical speciation were also determined. The results showed that the mean total concentration followed the order of Pb > As > Cd. A large proportion of Pb, Cd and As were accumulated in upper soil profiles (depth < 3 m). Heavy pollution of Pb, Cd and As were observed in the whole soil profile at the area of fuel oil storage tank (ZY6) and lead smelting area (ZY8). The dominant fraction of Cd was exchangeable fraction (F1); Pb was dominant in Fe/Mn oxides-bound fraction (F3) in most cases; Crystallized Fe/Al hydrous oxides bound fraction (F4) generally accounted for a large proportion of As. Mobility factor (MF) followed the order Cd > As > Pb, indicating that Cd was the most mobile element in soil profiles. Pearson correlation analysis found that MFCd was significantly positively correlated to soil silt; the F4 fraction percentage of As was significantly positively correlated to soil redox potential (Eh). Additionally, MFCd/Pb was found to be positively correlated to crystalline iron (Fec), while negatively correlated to amorphous iron (Feo). The findings reported in this study, on the basis of distribution characteristics of chemical speciation could provide a new solution for future soil remediation at the site. Long-term solutions to metal(loid)s pollution might be offered by microbial-assisted soil washing technique that promotes the transformation of Fe/Mn oxides-bound fraction and organic/sulfide-bound fraction.

Life cycle assessment and cost analysis for copper hydrometallurgy industry in China.

Understanding the environmental and economic impacts of copper hydrometallurgy throughout the whole life cycle is necessary for sustainable development of the copper industry. In this study, the environmental impacts and economic costs throughout the two major copper hydrometallurgical routes in China, including heap leaching and heap-agitation leaching, are analyzed and compared using the life cycle assessment (LCA) and life cycle cost (LCC) technique. The life cycle inventory compiled from the annual statistics of the Muliashi Copper Mine, and the data regarding energy and materials process are based on the GaBi databases. The environmental impacts are quantified into 12 indicators. The results show that compared with heap leaching route, heap-agitation leaching route reduces 36.8% of abiotic depletion potential (ADP elements), but increases over half of cumulative energy demand (CED), marine aquatic ecotoxicity potential (MAETP) and human toxicity potential (HTP). Furthermore, the stage of electrowinning and agitation leaching contributes the largest environmental impact to heap leaching and heap-agitation leaching route, respectively. This is mainly due to huge consumption of electricity and sulfuric acid. The analysis of economic cost reveals that heap leaching route needs internal cost of $3225/t Cu and external cost of $426/t Cu. Compared with heap leaching route, heap-agitation leaching route increased the internal and external cost by 18.9% and 54.2%, respectively. But the economic return from heap-agitation leaching is double that from heap leaching. Together, these results indicate heap-agitation leaching has a larger environmental impact and higher economic benefit than heap leaching, which is helpful for the government to design ecological compensation policies in the balance between ecological environment and economic development.

Mobile genetic elements mediate the mixotrophic evolution of novel Alicyclobacillus species for acid mine drainage adaptation.

Alicyclobacillus species inhabit diverse environments and have adapted to broad ranges of pH and temperature. However, their adaptive evolutions remain elusive, especially regarding the role of mobile genetic elements (MGEs). Here, we characterized the distributions and functions of MGEs in Alicyclobacillus species across five environments, including acid mine drainage (AMD), beverages, hot springs, sediments, and soils. Nine Alicyclobacillus strains were isolated from AMD and possessed larger genome sizes and more genes than those from other environments. Four AMD strains evolved to be mixotrophic and fell into distinctive clusters in phylogenetic tree. Four types of MGEs including genomic island (GI), insertion sequence (IS), prophage, and integrative and conjugative element (ICE) were widely distributed in Alicyclobacillus species. Further, AMD strains did not possess CRISPR-Cas systems, but had more GI, IS, and ICE, as well as more MGE-associated genes involved in the oxidation of iron and sulfide and the resistance of heavy metal and low temperature. These findings highlight the differences in phenotypes and genotypes between strains isolated from AMD and other environments and the important role of MGEs in rapid environment niche expansions.

Ecological strategies of biological and chemical control agents on wildfire disease of tobacco (Nicotiana tabacum L.).

BACKGROUND: To investigate the ecological effects of chemical and biological control methods on tobacco wildfire disease, a plot field experiment was conducted to compare the control efficiency and mechanisms of a chemical pesticide (kasugamycin wettable powder, KWP) and a biological control agent (BCA) through high-throughput sequencing of bacterial 16S rRNA genes. RESULTS: The results showed that the BCA displayed better performance in decreasing the disease index and morbidity of tobacco than the chemical pesticide. By monitoring the endophytic community within tobacco leaves, it was found that the control effects of these two methods might be mediated by different changes in the endophytic bacterial communities and community assembly patterns. The application of either method decreased the taxonomic diversity of the leaf endophytic community. Compared to the BCA, KWP showed a more significant effect on the endophytic community structure, while the endophytic community treated with the BCA was able to return to the original state, which presented much lower disease infection. The disease control efficiency of KWP and BCA treatments might be achieved by increasing the abundance of Sphingomonas and Streptophyta, respectively. Furthermore, an analysis of the ecological processes in community assembly indicated that the BCA strengthened the homogeneous and variable selection, while KWP enhanced ecological drift. CONCLUSIONS: The results suggested different control mechanisms between KWP and BCA treatments, which will help in developing diverse ecological strategies for plant disease control.

Distribution of the potential pathogenic Alternaria on plant leaves determines foliar fungal communities around the disease spot.

Plant leaves are colonized by a remarkably diverse fungal microbiome, which contributes to host plant growth and health. However, responses of foliar fungal community to phytopathogen invasion and measures of the fungal community taken to resist or assist pathogens remain elusive. By utilizing high-throughput sequencing of internal transcribed spacer (ITS) amplicons, we studied the relationships between the foliar fungal community around the disease spot and the pathogen of brown spot disease. The pathogenic Alternaria was found to follow a dramatically decreased trend from the disease spot to its surrounding fungal communities, whose community structure also diverged substantially away from the disease spot community. With the increase of pathogenic Alternaria, diversity indexes, including Shannon, Pielou and Simpson, showed a trend of increasing first and then decreasing. Total network links and the average path distance exhibited strong negative and positive correlations with Alternaria, respectively. Five keystone members showed direct interactions with pathogenic Alternaria. Members of Botryosphaeria, Paraphoma and Plectosphaerella might act as key 'pathogen facilitators' to increase the severity and development of brown spot disease, while Pleospora and Ochrocladosporium might be important 'pathogen antagonists' to suppress the expansion of pathogenic Alternaria. Our study provides new insights in developing new strategies for leaf disease prediction or prevention.

Soil potentials to resist continuous cropping obstacle: Three field cases.

Continuous cropping has become the most common system in intensive, modern agricultural production; however, obstacles often appear in continuous cropping patterns after a few years of use. There have been several studies about the impacts of continuous cropping on soil microbial, but few about differences between soil experiencing continuous cropping obstacles and those where such obstacles had been resisted. Here, after ten or twenty years of continuous tobacco cropping, we collected soil samples investigating discrepancies in soil property and bacterial community between soils experiencing continuous cropping obstacles and soils where the obstacles were resisted providing insight into preventing and controlling continuous cropping obstacles. Results showed that soil organic matter (SOM), available phosphorus (AP), total nitrogen (TN), nitrate-N (NO3--N), and bacterial diversity of samples where continuous cropping obstacles had been resisted were significantly higher than those where continuous cropping obstacles were present. Besides, SOM, AP, TN, and Ammonium-N (NH4+-N) considerably affected the bacterial community. Among all variables, NH4+-N explained the largest proportion of bacterial community variation. Molecular ecological networks were used to putatively identify keystone taxa, including Acidobacteria Gp1, Acidobacteria Gp2, Acidobacteria Gp16, and WPS-1_genera_incertae_sedis. Their relative abundance significantly changed between the two conditions. Overall, our results indicate that decreases in soil nutrient content and bacterial diversity, and significant changes in some keystone taxa abundances may be important factors leading to increased soil-borne diseases and reduced tobacco production potential or quality. Thus, during agricultural production, we could regulate the stability of the soil-crop-microbial ecological system via crop rotation, intercropping, or the use of specialized bio-fertilizers and soil conditioners to mitigate continuous cropping obstacles.

Production and functionality of exopolysaccharides in bacteria exposed to a toxic metal environment.

In this study, the production and compositional analysis of exopolysaccharides produced by Bacillus cereus KMS3-1 grown in metal amended conditions were investigated. In addition, the metal adsorption efficacy of exopolysaccharides (EPS) produced by KMS3-1 strain was evaluated in a batch mode. Increased production of exopolysaccharides by KMS3-1 strain was observed while growing under metal amended conditions (100 mg/L) and also, the yield was in the order of Pb(II)>Cu(II)>Cd(II)>Control. Characterization of EPS using FT-IR, XRD, and SEM analysis revealed that the EPS can interact with metal ions through their functional groups (O‒H, CH, CË­O, C‒O, and C‒CË­O) and assist the detoxification process. Further, equilibrium results were fitted with the Langmuir model and notably, the maximum adsorption capacity (Qmax) of EPS for Cd(II), Cu(II), and Pb(II) found to be 54.05, 71.42, and 78.74 mg/g, respectively. To the best of our knowledge, EPS demonstrating proficient metal adsorption was substantiated by XRD analysis in this study. Owing to good adsorbing nature, the exopolysaccharides could be used as chelating substances for wastewater treatment.

Bacterial adaptive strategies to cope with metal toxicity in the contaminated environment - A review.

Heavy metal contamination poses a serious environmental hazard, globally necessitating intricate attention. Heavy metals can cause deleterious health hazards to humans and other living organisms even at low concentrations. Environmental biotechnologists and eco-toxicologists have rigorously assessed a plethora of bioremediation mechanisms that can hamper the toxic outcomes and the molecular basis for rejuvenating the hazardous impacts, optimistically. Environmental impact assessment and restoration of native and positive scenario has compelled biological management in ensuring safety replenishment in polluted realms often hindered by heavy metal toxicity. Copious treatment modalities have been corroborated to mitigate the detrimental effects to remove heavy metals from polluted sites. In particular, Biological-based treatment methods are of great attention in the metal removal sector due to their high efficiency at low metal concentrations, ecofriendly nature, and cost-effectiveness. Due to rapid multiplication and growth rates, bacteria having metal resistance are advocated for metal removal applications. Evolutionary implications of coping with heavy metals toxicity have redressed bacterial adaptive/resistance strategies related to physiological and cross-protective mechanisms. Ample reviews have been reported for the bacterial adaptive strategies to cope with heavy metal toxicity. Nevertheless, a holistic review summarizing the redox reactions that address the cross-reactivity mechanisms between metallothionein synthesis, extracellular polysaccharides production, siderophore production, and efflux systems of metal resistant bacteria are scarce. Molecular dissection of how bacteria adapt themselves to metal toxicity can augment novel and innovative technologies for efficient detoxification, removal, and combat the restorative difficulties for stress alleviations. The present comprehensive compilation addresses the identification of newer methodologies, summarizing the prevailing strategies of adaptive/resistance mechanisms in bacterial bioremediation. Further pitfalls and respective future directions are enumerated in invigorating effective bioremediation technologies including overexpression studies and delivery systems. The analysis will aid in abridging the gap for limitations in heavy metal removal strategies and necessary cross-talk in elucidating the complex cascade of events in better bioremediation protocols.

Development of the yeast and lactic acid bacteria co-culture agent for atmospheric ammonia removing: Genomic features and on-site applications.

Odorous gas (e.g. atmospheric ammonia) in low ventilation public places, such as public toilets and waste transfer stations, causes severe health problems. Many technologies are developed to purify the atmospheric ammonia, among which the microbial agents are supposed to be a green and economical approach. In this study, we developed a yeast, Pichia sp. J1, and a lactic acid bacterium (LAB), Lactobacillus paracasei B1, co-culture agent for atmospheric ammonia removing. The on-site application results indicated the yeast and LAB mixed fermented agent had a maximum ammonia removing efficiency of 98.78%, which is significantly higher than the pure cultures (78.93% for B1 and 75.00% for J1), indicating the co-culture agent is an excellent biological product for ammonia removal. The excellent performance of the agent is closely related to the synergy behaviors between the yeast and LAB. In the co-culture agents, some of the LAB cells adhered closely to the yeast, and the growth and lactic acid producing ability of LAB were significantly promoted by yeast. Genomic analysis indicated the complementary of nutrients, i.e. carbon and nitrogen resources, signal transduction, and adhesion proteins (regulates adhesion behavior) played roles in regulating the synergy effects. Our study offers a novel biological solution of odorous gas purification.