Development of certified reference material NMIJ CRM 6205-a for the validation of DNA quantification methods: accurate mass concentrations of 600-bp DNA solutions having artificial sequences.

Two 600-bp DNA solutions (DNA600-G and DNA600-T) were developed as certified reference material, NMIJ CRM 6205-a, for the validation of DNA quantification methods. Both DNA600-G and DNA600-T are ideal as "spike-in control" because these materials have artificial nucleic acid sequences. The certified values were determined as the mass concentration of total DNA (whole DNA materials in sample solution regardless of sequence) at 25 °C by formic acid hydrolysis/liquid chromatography-isotope dilution mass spectrometry (LC-IDMS) and inductively coupled plasma-mass spectrometry (ICP-MS) based on the amount of phosphorus. DNAs were synthesized, and plasmids including the synthesized DNAs were cloned into Escherichia coli DH5α. The amplified plasmids were digested with a restriction enzyme and highly purified. Then, the purified DNAs were diluted with water to approximately 1 ng/µL. By using the CRM-validated methods in fields where DNA quantification is required, the reliability of DNA quantification could be improved. Graphical abstract.

Development of C-reactive protein certified reference material NMIJ CRM 6201-b: optimization of a hydrolysis process to improve the accuracy of amino acid analysis.

To standardize C-reactive protein (CRP) assays, the National Metrology Institute of Japan (NMIJ) has developed a C-reactive protein solution certified reference material, CRM 6201-b, which is intended for use as a primary reference material to enable the SI-traceable measurement of CRP. This study describes the development process of CRM 6201-b. As a candidate material of the CRM, recombinant human CRP solution was selected because of its higher purity and homogeneity than the purified material from human serum. Gel filtration chromatography was used to examine the homogeneity and stability of the present CRM. The total protein concentration of CRP in the present CRM was determined by amino acid analysis coupled to isotope-dilution mass spectrometry (IDMS-AAA). To improve the accuracy of IDMS-AAA, we optimized the hydrolysis process by examining the effect of parameters such as the volume of protein samples taken for hydrolysis, the procedure of sample preparation prior to the hydrolysis, hydrolysis temperature, and hydrolysis time. Under optimized conditions, we conducted two independent approaches in which the following independent hydrolysis and liquid chromatography-isotope dilution mass spectrometry (LC-IDMS) were combined: one was vapor-phase acid hydrolysis (130 °C, 24 h) and hydrophilic interaction liquid chromatography-mass spectrometry (HILIC-MS) method, and the other was microwave-assisted liquid-phase acid hydrolysis (150 °C, 3 h) and pre-column derivatization liquid chromatography-tandem mass spectrometry (LC-MS/MS) method. The quantitative values of the two different amino acid analyses were in agreement within their uncertainties. The certified value was the weighted mean of the results of the two methods. Uncertainties from the value-assignment method, between-method variance, homogeneity, long-term stability, and short-term stability were taken into account in evaluating the uncertainty for a certified value. The certified value and the expanded uncertainty (k = 2) of CRM 6201-b are (40.0 ± 1.6) µmol kg(-1).

Synthesis-property-performance relationships of multifunctional bacterial cellulose composites fermented in situ alkali lignin medium.

This work demonstrates a unique approach of utilizing alkali lignin (AL), as smart additive to in situ BC fermentation in which it concurrently acts as promoter to microbial growth as well as reinforcing filler for fabrication of multifunctional composites. Traditionally, BC fermentation is accompanied by inhibitor formation with sudden drop in pH leading to low yield and biomass growth. AL due to its antioxidant nature prevents formation of gluconic acid as byproduct, at ∼0.25 wt.% AL based on inhibitory byproduct kinetics. Interestingly, AL self-assembles to form primary and secondary structures in BC pores, resulting in simultaneous improvement in thermal stability as well as toughness. The BC/AL films show strong UV-blocking capacity with prolonged radical scavenging activity and preventing browning of freshly cut apples making it suitable as food packaging. Therefore, present work opens up new avenues for fabrication of high-performance BC-based composites through selection of smart materials which can simultaneously improve BC bioprocessing.

Cryptic antifungal compounds active by synergism with polyene antibiotics.

The majority of antifungal compounds reported so far target the cell wall or cell membrane of fungi, suggesting that other types of antibiotics cannot exert their activity because they cannot penetrate into the cells. Therefore, if the permeability of the cell membrane could be enhanced, many antibiotics might be found to have antifungal activity. We here used the polyene antibiotic nystatin, which binds to ergosterol and forms pores at the cell membrane, to enhance the cellular permeability. In the presence of nystatin, many culture extracts from entomopathogenic fungi displayed antifungal activity. Among all the active extracts, two active components were purified and identified as helvolic acid and terramide A. Because the minimum inhibitory concentration of either compound was reduced four-fold in the presence of nystatin, it can be concluded that this screening method is useful for detecting novel antifungal activity.

Development of High-purity Certified Reference Materials for 17 Proteinogenic Amino Acids by Traceable Titration Methods.

To ensure the reliability of amino acid analyses, the National Metrology Institute of Japan of the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST) has developed high-purity certified reference materials (CRMs) for 17 proteinogenic amino acids. These CRMs are intended for use as primary reference materials to enable the traceable quantification of amino acids. The purity of the present CRMs was determined based on two traceable methods: nonaqueous acidimetric titration and nitrogen determination by the Kjeldahl method. Since neither method could distinguish compounds with similar structures, such as amino acid-related impurities, impurities were thoroughly quantified by combining several HPLC methods, and subtracted from the obtained purity of each method. The property value of each amino acid was calculated as a weighted mean of the corrected purities by the two methods. The uncertainty of the property value was obtained by combining measurement uncertainties of the two methods, a difference between the two methods, the uncertainty from the contribution of impurities, and the uncertainty derived from inhomogeneity. The uncertainty derived from instability was considered to be negligible based on stability monitoring of some CRMs. The certified value of each amino acid, property value with uncertainty, was given for both with or without enantiomeric separation.