Practical Finite-Time Command-Filtered Adaptive Backstepping With Its Applications to Quadrotor Hovers.

In this article, a practical finite-time command-filtered adaptive backstepping (PFTCFAB) control method is presented for a class of uncertain nonlinear systems with nonparametric unknown nonlinearities and external disturbances. Unlike PFTCFAB control techniques that use neural networks (NNs) or fuzzy-logic systems (FLSs) to deal with system uncertainties, the proposed method is capable of handling such uncertainties without the need for NNs or FLSs, thus reducing complexity and increasing reliability. In the proposed approach, novel function adaptive laws are designed to directly estimate unknown nonparametric nonlinearities and external disturbances by means of command filter techniques, and a type of practical finite-time command filters is proposed to obtain such laws. Moreover, the PFTCFAB controllers and finite-time command filters are designed with practical finite-time Lyapunov stability, which ensures finite-time stability of system tracking and filter estimation errors. Experimental results with a quadrotor hover system are presented and discussed to demonstrate the advantages and effectiveness of the proposed control strategy.

Data Augmentation in Defect Detection of Sanitary Ceramics in Small and Non-i.i.d Datasets.

In this study, a data-augmentation method is proposed to narrow the significant difference between the distribution of training and test sets when small sample sizes are concerned. Two major obstacles exist in the process of defect detection on sanitary ceramics. The first results from the high cost of sample collection, namely, the difficulty in obtaining a large number of training images required by deep-learning algorithms, which limits the application of existing algorithms in sanitary-ceramic defect detection. Second, due to the limitation of production processes, the collected defect images are often marked, thereby resulting in great differences in distribution compared with the images of test sets, which further affects the performance of detect-detection algorithms. The lack of training data and the differences in distribution between training and test sets lead to the fact that existing deep learning-based algorithms cannot be used directly in the defect detection of sanitary ceramics. The method proposed in this study, which is based on a generative adversarial network and the Gaussian mixture model, can effectively increase the number of training samples and reduce distribution differences between training and test sets, and the features of the generated images can be controlled to a certain extent. By applying this method, the accuracy is improved from approximately 75% to nearly 90% in almost all experiments on different classification networks.

Trajectory Tracking of Variable Centroid Objects Based on Fusion of Vision and Force Perception.

Compared with traditional rigid objects' dynamic throwing and catching by the robot, the in-flight trajectory of nonrigid objects (incredibly variable centroid objects) throwing is more challenging to predict and track. This article proposes a variable centroid trajectory tracking network (VCTTN) with the fusion of vision and force information by introducing force data of throw processing to the vision neural network. The VCTTN-based model-free robot control system is developed to perform highly precise prediction and tracking with a part of the in-flight vision. The flight trajectories dataset of variable centroid objects generated by the robot arm is collected to train VCTTN. The experimental results show that trajectory prediction and tracking with the vision-force VCTTN is superior to the ones with the traditional vision perception and has an excellent tracking performance.

Fuzzy Adaptive Decentralized Control for Nonstrict-Feedback Large-Scale Switched Fractional-Order Nonlinear Systems.

This article investigates the adaptive fuzzy control algorithm for a class of large-scale switched fractional-order nonlinear nonstrict feedback systems. In this algorithm, we utilize fuzzy-logic systems (FLSs) to approximate the complicated unknown nonlinear functions. Based on the fractional Lyapunov stability rules, a virtual control law is presented. A fuzzy adaptive decentralized control method is developed under the technique of the Lyapunov function. Under the operation of the proposed algorithm, the stability of the proposed systems and the control performance can be guaranteed. Finally, simulation results are presented to illustrate the feasibility and effectiveness of the proposed method.

Hierarchical Multiobjective Heuristic for PCB Assembly Optimization in a Beam-Head Surface Mounter.

This article proposes a hierarchical multiobjective heuristic (HMOH) to optimize printed-circuit board assembly (PCBA) in a single beam-head surface mounter. The beam-head surface mounter is the core facility in a high-mix and low-volume PCBA line. However, as a large-scale, complex, and multiobjective combinatorial optimization problem, the PCBA optimization of the beam-head surface mounter is still a challenge. This article provides a framework for optimizing all the interrelated objectives, which has not been achieved in the existing studies. A novel decomposition strategy is applied. This helps to closely model the real-world problem as the head task assignment problem (HTAP) and the pickup-and-place sequencing problem (PAPSP). These two models consider all the factors affecting the assembly time, including the number of pickup-and-place (PAP) cycles, nozzle changes, simultaneous pickups, and the PAP distances. Specifically, HTAP consists of the nozzle assignment and component allocation, while PAPSP comprises place allocation, feeder set assignment, and place sequencing problems. Adhering strictly to the lexicographic method, the HMOH solves these subproblems in a descending order of importance of their involved objectives. Exploiting the expert knowledge, each subproblem is solved by an elaborately designed heuristic. Finally, the proposed HMOH realizes the complete and optimal PCBA decision making in real time. Using industrial PCB datasets, the superiority of HMOH is elucidated through comparison with the built-in optimizer of the widely used Samsung SM482.

Event-Triggered Adaptive Asymptotic Tracking Control of Uncertain MIMO Nonlinear Systems With Actuator Faults.

In this article, an adaptive event-triggered fault-tolerant asymptotic tracking control problem guaranteeing prescribed performance is addressed for a class of block-triangular multi-input and multioutput uncertain nonlinear systems with unknown nonlinearities, unknown control directions, and actuator faults. Through a systematic co-design of the adaptive control law and the event-triggered mechanism, including fixed and relative threshold strategies, a control scheme with low structure and calculation complexity is designed to conserve system communication and computation resources. In this design, the output asymptotic tracking is achieved. The Nussbaum gain technique is incorporated to overcome unknown control directions with a new adaptive law, and a type of barrier Lyapunov function is adopted to handle the prescribed performance control problem, which contributes to a novel control law with strong robustness. The robust controller can address the uncertainties and couplings derived from the system structure, actuator faults, and event-triggered rules, without using approximating structures or compensators. Besides, the explosion of complexity is avoided. It is proved that all signals of the closed-loop system remain bounded, and system tracking errors asymptotically approach 0 with the prescribed performance, while the Zeno behavior is prevented. Finally, the effectiveness of the proposed control scheme is evaluated via an application example of the half-car active suspension system.

Adaptive Sensor Fault Accommodation for Vehicle Active Suspensions via Partial Measurement Information.

In this article, an adaptive sensor fault accommodation scheme is proposed for uncertain vehicle active suspensions via output-feedback control where vehicle body displacement is the only measurable output signal corrupted by sensor bias. An adaptive observer with variable gains is constructed to obtain state estimates whose design procedure involves parameter adaption of the uncertain system parameters and sensor bias, and an output-feedback controller is designed to attenuate the vehicle body displacement based on the partial measurement information, estimates of the states, and unknown parameters. Compensation for measurement error is made both in the design process of the adaptive observer and output-feedback controller in order to weaken the influence brought about by sensor bias fault. In order to guarantee system stability, the variable observer gains are determined in real time using a switching strategy where their values can be modified in finite times by monitoring the state estimates generated by the observer itself. It is proved that the vehicle body displacement will converge to a small neighborhood around zero, and all the signals of the closed-loop system are ensured to be bounded through selecting suitable control parameters. Simulation is carried out to show the effectiveness of the proposed method and results indicate that better stabilization of the suspension vertical motion can be achieved through adaptive compensation for sensor bias.

Octopus-Inspired Microgripper for Deformation-Controlled Biological Sample Manipulation.

Predators in nature grip their prey in different ways, which give innovational ideas of gripping approaches in industrial applications. Octopus performs flexible gripping with the help of vacuum grippers, suction cups, which inspired a new type of microgripper for biological sample micromanipulation. The proposed gripper consists of a glass pipette and a pump driven by a step-motor. The step-motor is controlled with adaptive robust control to adjust the gripping pressure applied on the biological sample. A dynamic model is developed for the biological sample aiming for better deformation control performance. A visual detection algorithm is developed for data processing to identify the parameters in the dynamic model and the detection result of visual algorithm is also used as feedback of adaptive robust control, which diminishes the negative influence of parameter and model uncertainties. Zebrafish larva was used as the testing sample for experiment and the corresponding parameters were identified experimentally. The experimental results correlated well with the model predicted deformation curve and visual detection algorithm provided promising accuracy, which is less than [Formula: see text]. Adaptive robust control provides fast and accuracy response in point-to-point deformation testing, and the average responding time is less than 30 s and the average error is no larger than 1 pixel.

Barrier Lyapunov Function-Based Adaptive Fault-Tolerant Control for a Class of Strict-Feedback Stochastic Nonlinear Systems.

This article investigates the adaptive fuzzy fault-tolerant control problem for a class of strict-feedback stochastic nonlinear systems with quantized input signal. A hysteretic quantizer is utilized to avoid chattering caused by quantized input signals. The fuzzy-logic systems are utilized to approximate the unknown nonlinear functions and also to construct the fuzzy state observer, which is used to estimate the immeasurable state vector. The actuator faults considered in this article are loss of effectiveness and lock-in-place faults. By using the Lyapunov stability theory, the closed-loop stochastic nonlinear system is guaranteed to be stable in probability, and all the signals of the closed-loop system are bounded in probability in the presence of quantized input and actuator faults. Finally, a simulation example is given to verify the validity of the proposed control strategy.

An improved automated zebrafish larva high-throughput imaging system.

As a typical multicellular model organism, the zebrafish has been increasingly used in biological research. Despite the efforts to develop automated zebrafish larva imaging systems, existing ones are still defective in terms of reliability and automation. This paper presents an improved zebrafish larva high-throughput imaging system, which makes improvements to the existing designs in the following aspects. Firstly, a single larva extraction strategy is developed to make larva loading more reliable. The aggregated larvae are identified, classified by their numbers and patterns, and separated by the aspiration pipette or water stream. Secondly, the dynamic model of larva motion in the capillary is established and an adaptive robust controller is designed for decelerating the fast-moving larva to ensure the survival rate. Thirdly, rotating the larva to the desired orientation is automated by developing an algorithm to estimate the larva's initial rotation angle. For validating the improved larva imaging system, a real-time heart rate monitoring experiment is conducted as an application example. Experimental results demonstrate that the goals of the improvements have been achieved. With these improvements, the improved zebrafish larva imaging system remarkably reduces human intervention and increases the efficiency and success/survival rates of larva imaging.

Zebrafish Larva Orientation and Smooth Aspiration Control for Microinjection.

OBJECTIVE: The zebrafish has been proven to be a significant model organism in various research fields. For investigating the in vivo properties of biologics within zebrafish with developed organs, an automated zebrafish larva organ injection system is crucially needed. However, current zebrafish larva manipulation techniques cannot accomplish this operation efficiently and continuously. METHODS: In this paper, we present a novel zebrafish larva manipulation technique with two key steps in the microinjection system: orienting and aspirating zebrafish larvae automatically. The orientation control is realized in a customized microfluidic chip, after which the larva moves tail-first until reaching the channel exit. Then a dynamic model of larva aspiration is established and an adaptive robust controller is designed. RESULTS: Experimental results demonstrate that high success rate can be reached and damage to larva body is reduced. CONCLUSION: The presented strategy is capable of orienting and aspirating zebrafish larvae smoothly and efficiently. SIGNIFICANCE: The proposed methods have the advantage of low cost, easy implementability and good stability.