RESUMEN
The dissolution of transition metal ions causes the notorious peeling of active substances and attenuates electrochemical capacity. Frustrated by the ceaseless task of pushing a boulder up a mountain, Sisyphus of the Greek myth yearned for a treasure to be unearthed that could bolster his efforts. Inspirationally, by using ferricyanide ions (Fe(CN)63-) in an electrolyte as a driving force and taking advantage of the fast nucleation rate of copper hexacyanoferrate (CuHCF), we successfully reversed the dissolution of Fe and Cu ions that typically occurs during cycling. The capacity retention increased from 5.7% to 99.4% at 0.5 A g-1 after 10,000 cycles, and extreme stability of 99.8% at 1 A g-1 after 40,000 cycles was achieved. Fe(CN)63- enables atom-by-atom substitution during the electrochemical process, enhancing conductivity and reducing volume change. Moreover, we demonstrate that this approach is applicable to various aqueous batteries (i.e., NH4+, Li+, Na+, K+, Mg2+, Ca2+, and Al3+).
RESUMEN
Scanning electron microscopy (SEM) integrated with energy-dispersive X-ray spectrometry (EDS) are scientifically used to characterise the morphology, chemical composition and elemental distribution of powder samples. Upon an accessible analytical instrument, the specimen preparation method directly affects the quality and accuracy of the observation and analysis. In this paper, three preparation methods were utilised to characterise the carbon nanotubes (CNTs) based materials, and their strengths as well as the limitations are discussed. Thus, a characterisation strategy was established by comparing the obtained three measurement together with the derived sample information. To the end, we proposed to acquire the backscattered electron (BSE) images of nanoscale heavier nanoclusters grafted CNTs, typically for wide functional applications such as energy conversion and storage. Our proposed optimum method works particularly on the clarification of powder samples with small particle sizes and low atomic numbers, which underscores the involved contribution of SEM backscattered electron images.
RESUMEN
To obtain anion exchange membranes with both high ionic conductivity and good dimensional stability, a series of side-chain-type poly(arylene ether sulfone)s (PAES-QDTPM-x) were designed and synthesized. Quaternary ammonium (QA) groups were densely aggregated and grafted onto the main chain via flexible hydrophobic spacers. Well-defined microphase separation was confirmed by small-angle X-ray scattering. PAES-QDTPM-0.30 exhibited reasonably high conductivity (39.4 mS cm-1 at 20 °C and 76.1 mS cm-1 at 80 °C) and excellent dimensional stability at 80 °C (11.9% in length, 11.2% in thickness) due to the concentration of ion clusters and the side-chain-type structure. All membranes maintained over 82% of the conductivity after alkali treatment for 14 days. In the H2/O2 fuel cell performance test, the maximum power density of PAES-QDTPM-0.30 at 60 °C was 225.8 mW cm-2.