RESUMEN
In thermoelectric modules, multiple n-type and p-type thermoelectric elements are electrically connected in series on a Cu electrode that is bonded to a ceramic substrate. Defects in the bond between the thermoelectric elements and the Cu electrode could impact the performance of the entire thermoelectric module. This study investigated the effect of plating layers on the bonding strength of p-type Bi-Te thermoelectric elements. Ni and Pd electroplating was applied to Bi-Te thermoelectric elements; further, electroless Ni-P immersion gold (ENIG) plating was applied to Cu electrodes bonded to ceramic substrates. Forming a Pd/Ni electroplating layer on the surface of thermoelectric elements and an ENIG plating layer on the surface of the Cu electrode improved the bonding strength by approximately 3.5 times. When the Pd/Ni and ENIG plating layers were formed on Bi-Te elements and Cu substrates, respectively, the solderability greatly increased; as the solderability increased, the thickness of the diffusion layer formed with the solder layer increased. The improved bonding strength of the Pd/Ni plated thermoelectric element bonded on the ENIG plated substrate is attributed to the enhanced solderability due to the rapid inter-diffusion of Pd and Au into the solder layer and the formation of a stable and non-defected solder reaction interface layer.
RESUMEN
This study is intended to be used as the basic material for the taxonomic research by observing the stages of skeletal development of Luciogobius grandis larvae compared to the skeletal development patterns of the same fish family of Gobiidae. 3 days after hatching (DAH), the preflexion larvae was 4.01±0.11 mm (n=5) in average total length (TL) and the frontal began to ossify in the skull. 17 DAH, the advanced postflexion larvae was 5.37±0.05 mm (n=5) in average TL the supraoccipital and epiotic were ossified in the cranial bone. 36 DAH, the juvenile was 12.2±0.20 mm (n=5) in average TL and the urohyal was ossified in the hyoid arch. In addition to one hypural bone being ossified, the first, second, third and fourth were combined and were made three bone fragments and then, the bone ossification of all skeletons was completed.
RESUMEN
The egg development and early life history of Korean spotted sleeper, Odontobutis interrupta which is Korean endemic species from Sora-choen was investigated. The Korean spotted sleeper were caught at Sora-myeon, Yeosu-si, Jeollanamdo, from Korea at May in 2014. The fertilized eggs were 4.23 ± 0.05 mm in long diameter and had oil globules. Hatching time of the embryo began about 442 hr 14 min after fertilization under water temperature of 19.5°C. The newly hatched larvae were 4.27 ± 0.35 mm in total length and their anus were not yet opened. 3 days after hatching postlarvae was measured 6.20 ± 0.11 mm in total length. 10 days after hatching postlarvae was measured 6.69 ± 0.14 mm in total length.