Pressure-Induced Dislocations and Their Influence on Ionic Transport in Li+-Conducting Argyrodites.

The influence of the microstructure on the ionic conductivity and cell performance is a topic of broad scientific interest in solid-state batteries. The current understanding is that interfacial decomposition reactions during cycling induce local strain at the interfaces between solid electrolytes and the anode/cathode, as well as within the electrode composites. Characterizing the effects of internal strain on ion transport is particularly important, given the significant local chemomechanical effects caused by volumetric changes of the active materials during cycling. Here, we show the effects of internal strain on the bulk ionic transport of the argyrodite Li6PS5Br. Internal strain is reproducibly induced by applying pressures with values up to 10 GPa. An internal permanent strain is observed in the material, indicating long-range strain fields typical for dislocations. With increasing dislocation densities, an increase in the lithium ionic conductivity can be observed that extends into improved ionic transport in solid-state battery electrode composites. This work shows the potential of strain engineering as an additional approach for tuning ion conductors without changing the composition of the material itself.

Exploring Layered Disorder in Lithium-Ion-Conducting Li3Y1-xInxCl6.

Li3Y1-xInxCl6 undergoes a phase transition from trigonal to monoclinic via an intermediate orthorhombic phase. Although the trigonal yttrium containing the end member phase, Li3YCl6, synthesized by a mechanochemical route, is known to exhibit stacking fault disorder, not much is known about the monoclinic phases of the serial composition Li3Y1-xInxCl6. This work aims to shed light on the influence of the indium substitution on the phase evolution, along with the evolution of stacking fault disorder using X-ray and neutron powder diffraction together with solid-state nuclear magnetic resonance spectroscopy, studying the lithium-ion diffusion. Although Li3Y1-xInxCl6 with x ≤ 0.1 exhibits an ordered trigonal structure like Li3YCl6, a large degree of stacking fault disorder is observed in the monoclinic phases for the x ≥ 0.3 compositions. The stacking fault disorder materializes as a crystallographic intergrowth of faultless domains with staggered layers stacked in a uniform layer stacking, along with faulted domains with randomized staggered layer stacking. This work shows how structurally complex even the "simple" series of solid solutions can be in this class of halide-based lithium-ion conductors, as apparent from difficulties in finding a consistent structural descriptor for the ionic transport.

On the Discrepancy between Local and Average Structure in the Fast Na+ Ionic Conductor Na2.9Sb0.9W0.1S4.

Aliovalent substitution is a common strategy to improve the ionic conductivity of solid electrolytes for solid-state batteries. The substitution of SbS43- by WS42- in Na2.9Sb0.9W0.1S4 leads to a very high ionic conductivity of 41 mS cm-1 at room temperature. While pristine Na3SbS4 crystallizes in a tetragonal structure, the substituted Na2.9Sb0.9W0.1S4 crystallizes in a cubic phase at room temperature based on its X-ray diffractogram. Here, we show by performing pair distribution function analyses and static single-pulse 121Sb NMR experiments that the short-range order of Na2.9Sb0.9W0.1S4 remains tetragonal despite the change in the Bragg diffraction pattern. Temperature-dependent Raman spectroscopy revealed that changed lattice dynamics due to the increased disorder in the Na+ substructure leads to dynamic sampling causing the discrepancy in local and average structure. While showing no differences in the local structure, compared to pristine Na3SbS4, quasi-elastic neutron scattering and solid-state 23Na nuclear magnetic resonance measurements revealed drastically improved Na+ diffusivity and decreased activation energies for Na2.9Sb0.9W0.1S4. The obtained diffusion coefficients are in very good agreement with theoretical values and long-range transport measured by impedance spectroscopy. This work demonstrates the importance of studying the local structure of ionic conductors to fully understand their transport mechanisms, a prerequisite for the development of faster ionic conductors.

Synthesis-Controlled Polymorphism and Anion Solubility in the Sodium-Ion Conductor Na3InCl6-xBrx (0 ≤ x ≤ 2).

Motivated by the significant transport property improvement of the anion-substituted lithium metal halides, a series of anion mixed solid solutions of Na3InCl6-xBrx (0 ≤ x ≤ 2) are successfully synthesized by ball milling and subsequent annealing. By milling, the Na3InCl6-xBrx solid solution series crystallizes in a monoclinic P21/n phase, while the subsequently annealed Na3InCl6-xBrx series transforms into a trigonal P3̅1c phase. Through annealing and changes of the structure type, greater anion solubility can be achieved. The halide substitution slightly improves the ionic conductivity in the Na3InCl6-xBrx series, indicating that mixed halide compositions and their structural changes affect the ionic transport albeit less strongly than in the lithium analogues such as Li3YCl6-xBrx and Li3InCl6-xBrx.

Investigating the Li+ substructure and ionic transport in Li10GeP2-xSbxS12 (0 ≤ x ≤ 0.25).

Understanding the correlation between ionic motion and crystal structure is crucial for improving solid electrolyte conductivities. Several substitution series in the Li10GeP2S12 structure have shown a favorable impact on the ionic conductivity, e.g. the replacement of P(+V) by Sb(+V) in Li10GeP2S12. However, here the interplay between the structure and ionic motion remains elusive. X-Ray diffraction, high-resolution neutron diffraction, Raman spectroscopy and potentionstatic impedance spectroscopy are employed to explore the impact of Sb(+V) on the Li10GeP2S12 structure. The introduction of antimony elongates the unit cell in the c-direction and increases the M(1)/P(1) and Li(2) polyhedral volume. Over the solid solution range, the Li+ distribution remains similar, an inductive effect seems to be absent and the ionic conductivity is comparable for all compositions. The effect of introducing Sb(+V) in Li10GeP2S12 cannot be corroborated.

Pt(II) Complexes with Tetradentate C

A series of four regioisomeric Pt(II) complexes (PtLa-n and PtLb-n) bearing tetradentate luminophores as dianionic ligands were synthesized. Hence, both classes of cyclometallating chelators were decorated with three n-hexyl (n = 6) or n-dodecyl (n = 12) chains. The new compounds were unambiguously characterized by means of multiple NMR spectroscopies and mass spectrometry. Steady-state and time-resolved photoluminescence spectroscopy as well quantum chemical calculations show that the effect of the regioisomerism on the emission colour and on the deactivation rate constants can be correlated with the participation of the Pt atom on the excited state. The thermal properties of the complexes were studied by DSC, POM and temperature-dependent steady-state photoluminescence spectroscopy. Three of the four complexes (PtLa-12, PtLb-6 and PtLb-12) present an intriguing thermochromism resulting from the responsive metal-metal interactions involving adjacent monomeric units. Each material has different transition temperatures and memory capabilities, which can be tuned at the intermolecular level. Hence, dipole-dipole interactions between the luminophores and disruption of the crystalline packing by the alkyl groups are responsible for the final properties of the resulting materials.

Opening Diffusion Pathways through Site Disorder: The Interplay of Local Structure and Ion Dynamics in the Solid Electrolyte Li6+xP1-xGexS5I as Probed by Neutron Diffraction and NMR.

Solid electrolytes are at the heart of future energy storage systems. Li-bearing argyrodites are frontrunners in terms of Li+ ion conductivity. Although many studies have investigated the effect of elemental substitution on ionic conductivity, we still do not fully understand the various origins leading to improved ion dynamics. Here, Li6+xP1-xGexS5I served as an application-oriented model system to study the effect of cation substitution (P5+ vs Ge4+) on Li+ ion dynamics. While Li6PS5I is a rather poor ionic conductor (10-6 S cm-1, 298 K), the Ge-containing samples show specific conductivities on the order of 10-2 S cm-1 (330 K). Replacing P5+ with Ge4+ not only causes S2-/I- anion site disorder but also reveals via neutron diffraction that the Li+ ions do occupy several originally empty sites between the Li rich cages in the argyrodite framework. Here, we used 7Li and 31P NMR to show that this Li+ site disorder has a tremendous effect on both local ion dynamics and long-range Li+ transport. For the Ge-rich samples, NMR revealed several new Li+ exchange processes, which are to be characterized by rather low activation barriers (0.1-0.3 eV). Consequently, in samples with high Ge-contents, the Li+ ions have access to an interconnected network of pathways allowing for rapid exchange processes between the Li cages. By (i) relating the changes of the crystal structure and (ii) measuring the dynamic features as a function of length scale, we were able to rationalize the microscopic origins of fast, long-range ion transport in this class of electrolytes.

Innovative Approaches to Li-Argyrodite Solid Electrolytes for All-Solid-State Lithium Batteries.

ConspectusAs the world transitions away from fossil energy to green and renewable energy, electrochemical energy storage increasingly becomes a vital component of the mix to conduct this transition. The central goal in developing next-generation batteries is to maximize the gravimetric and volumetric energy density and battery cycle life and improve safety. All solid-state batteries using a solid electrolyte and a lithium metal anode represent one of the most promising technologies that can achieve this goal. Highly conductive solid electrolytes (>10 mS·cm-1) are the key component to remove the safety concerns inherent with flammable organic liquid electrolytes and achieve high energy density by enabling high active material loading. Considering a range of inorganic solid electrolytes that have been developed to date, sulfide solid electrolytes exhibit the highest ionic conductivities, which even surpass those of conventional organic liquid electrolytes. Argyrodite-structured sulfide solid electrolytes are among the most promising materials in this class and are currently the dominantly used solid electrolytes for all-solid-state battery fabrication. Argyrodite solid electrolytes are particularly appealing because of their ultrahigh Li-ion conductivity, quasi-stable solid-electrolyte interphase (SEI) formed with Li metal, and ability to be prepared via scalable solution-assisted synthesis approaches. These factors are all vital for commercial applications.In this Account, we afford an overview of our recent development of several argyrodite superionic conductors, including Li6.6Si0.6Sb0.5S5I (24 mS·cm-1), Li6.6Ge0.6P0.4S5I (18 mS·cm-1), and Li5.5PS4.5Cl1.5 (12 mS·cm-1), and a comprehensive understanding of the origin of the underlying high conductivity, namely, sulfide/halide anion site disorder and Li cation site disorder. A high degree of sulfide/halide anion site disorder (changes in anion distribution) modifies the anionic charge, which in turn strongly influences the lithium distribution. A more inhomogeneous charge distribution in anion-disordered systems generates a spatially diffuse and delocalized lithium density, resulting in faster ionic transport. Lithium cation site disorder generated by increasing Li carrier concentration through aliovalent substitution creates high-energy interstitial sites for Li ion diffusion, which activate concerted ion migration and flatten the energy landscape for Li ion diffusion. This enables high conductivity in Li-rich argyrodite superionic conductors. These concepts are also expected to promote the design of rational new solid electrolytes and fundamental understanding of the structure-ion transport relationships in inorganic ionic conductors.Collectively, a comprehensive and deep understanding of the interphase formation between argyrodite solid electrolytes and cathode active materials/Li metal and the failure mechanism of all-solid-state batteries with argyrodite solid electrolytes will lead to the bottom-up engineering of the cathode/anode-solid electrolyte interfaces, which will accelerate the development of safe, high-energy-density all-solid-state lithium batteries.

Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries.

Developing reversible lithium metal anodes with high rate capability is one of the central aims of current battery research. Lithium metal anodes are not only required for the development of innovative cell concepts such as lithium-air or lithium-sulfur batteries, they can also increase the energy density of batteries with intercalation-type cathodes. The use of solid electrolyte separators is especially promising to develop well-performing lithium metal anodes, because they can act as a mechanical barrier to avoid unwanted dendritic growth of lithium through the cell. However, inhomogeneous electrodeposition and contact loss often hinder the application of a lithium metal anode in solid-state batteries. In this review, we assess the physicochemical concepts that describe the fundamental mechanisms governing lithium metal anode performance in combination with inorganic solid electrolytes. In particular, our discussion of kinetic rate limitations and morphological stability intends to stimulate further progress in the field of lithium metal anodes.

Sn Substitution in the Lithium Superionic Argyrodite Li6PCh5I (Ch = S and Se).

The lithium argyrodites Li6PS5X (X = Cl, Br, and I) have attracted interest as fast solid ionic conductors for solid-state batteries. Within this class of materials, it has been previously suggested that more polarizable anions and larger substituents should influence the ionic conductivity (e.g., substituting S by Se). Building upon this work, we explore the influence of Sn substitution in lithium argyrodites Li6+xSnxP1-xSe5I in direct comparison to the previously reported Li6+xSnxP1-xS5I series. The (P5+/Sn4+)Se43/4- polyhedral volume, unit cell volume, and lithium coordination tetrahedra Li(48h)-(S/Se)3-I increase with Sn substitution in this new selenide series. Impedance spectroscopy reveals that increasing Sn4+ substitution results in a fivefold improvement in the ionic conductivity when compared to Li6PSe5I. This work provides further understanding of compositional influences for optimizing the ionic conductivity of solid electrolytes.

Lithium-Metal Anode Instability of the Superionic Halide Solid Electrolytes and the Implications for Solid-State Batteries.

Owing to high ionic conductivity and good oxidation stability, halide-based solid electrolytes regain interest for application in solid-state batteries. While stability at the cathode interface seems to be given, the stability against the lithium metal anode has not been explored yet. Herein, the formation of a reaction layer between Li3 InCl6 (Li3 YCl6 ) and lithium is studied by sputter deposition of lithium metal and subsequent in situ X-ray photoelectron spectroscopy as well as by impedance spectroscopy. The interface is thermodynamically unstable and results in a continuously growing interphase resistance. Additionally, the interface between Li3 InCl6 and Li6 PS5 Cl is characterized by impedance spectroscopy to discern whether a combined use as cathode electrolyte and separator electrolyte, respectively, might enable long-term stable and low impedance operation. In fact, oxidation stable halide-based lithium superionic conductors cannot be used against Li, but may be promising candidates as cathode electrolytes.

Influence of Iron Sulfide Nanoparticle Sizes in Solid-State Batteries*.

Given the inherent performance limitations of intercalation-based lithium-ion batteries, solid-state conversion batteries are promising systems for future energy storage. A high specific capacity and natural abundancy make iron disulfide (FeS2 ) a promising cathode-active material. In this work, FeS2 nanoparticles were prepared solvothermally. By adjusting the synthesis conditions, samples with average particle diameters between 10 nm and 35 nm were synthesized. The electrochemical performance was evaluated in solid-state cells with a Li-argyrodite solid electrolyte. While the reduction of FeS2 was found to be irreversible in the initial discharge, a stable cycling of the reduced species was observed subsequently. A positive effect of smaller particle dimensions on FeS2 utilization was identified, which can be attributed to a higher interfacial contact area and shortened diffusion pathways inside the FeS2 particles. These results highlight the general importance of morphological design to exploit the promising theoretical capacity of conversion electrodes in solid-state batteries.

Evidence for a Solid-Electrolyte Inductive Effect in the Superionic Conductor Li10Ge1-xSnxP2S12.

Strategies to enhance ionic conductivities in solid electrolytes typically focus on the effects of modifying their crystal structures or of tuning mobile-ion stoichiometries. A less-explored approach is to modulate the chemical bonding interactions within a material to promote fast lithium-ion diffusion. Recently, the idea of a solid-electrolyte inductive effect has been proposed, whereby changes in bonding within the solid-electrolyte host framework modify the potential energy landscape for the mobile ions, resulting in an enhanced ionic conductivity. Direct evidence for a solid-electrolyte inductive effect, however, is lacking-in part because of the challenge of quantifying changes in local bonding interactions within a solid-electrolyte host framework. Here, we consider the evidence for a solid-electrolyte inductive effect in the archetypal superionic lithium-ion conductor Li10Ge1-xSnxP2S12. Substituting Ge for Sn weakens the {Ge,Sn}-S bonding interactions and increases the charge density associated with the S2- ions. This charge redistribution modifies the Li+ substructure causing Li+ ions to bind more strongly to the host framework S2- anions, which in turn modulates the Li+ ion potential energy surface, increasing local barriers for Li+ ion diffusion. Each of these effects is consistent with the predictions of the solid-electrolyte inductive effect model. Density functional theory calculations predict that this inductive effect occurs even in the absence of changes to the host framework geometry due to Ge → Sn substitution. These results provide direct evidence in support of a measurable solid-electrolyte inductive effect and demonstrate its application as a practical strategy for tuning ionic conductivities in superionic lithium-ion conductors.

Under Pressure: Mechanochemical Effects on Structure and Ion Conduction in the Sodium-Ion Solid Electrolyte Na3PS4.

Fast-ion conductors are critical to the development of solid-state batteries. The effects of mechanochemical synthesis that lead to increased ionic conductivity in an archetypical sodium-ion conductor Na3PS4 are not fully understood. We present here a comprehensive analysis based on diffraction (Bragg and pair distribution function), spectroscopy (impedance, Raman, NMR and INS), and ab initio simulations aimed at elucidating the synthesis-property relationships in Na3PS4. We consolidate previously reported interpretations regarding the local structure of ball-milled samples, underlining the sodium disorder and showing that a local tetragonal framework more accurately describes the structure than the originally proposed cubic one. Through variable-pressure impedance spectroscopy measurements, we report for the first time the activation volume for Na+ migration in Na3PS4, which is ∼30% higher for the ball-milled samples. Moreover, we show that the effect of ball-milling on increasing the ionic conductivity of Na3PS4 to ∼10-4 S/cm can be reproduced by applying external pressure on a sample from conventional high-temperature ceramic synthesis. We conclude that the key effects of mechanochemical synthesis on the properties of solid electrolytes can be analyzed and understood in terms of pressure, strain, and activation volume.

Local Charge Inhomogeneity and Lithium Distribution in the Superionic Argyrodites Li6PS5X (X = Cl, Br, I).

The lithium argyrodites Li6PS5X (X = Cl, Br, I) exhibit high lithium-ion conductivities, making them promising candidates for use in solid-state batteries. These solid electrolytes can show considerable substitutional X-/S2- anion disorder, typically correlated with higher lithium-ion conductivities. The atomic-scale effects of this anion site disorder within the host lattice-in particular how lattice disorder modulates the lithium substructure-are not well understood. Here, we characterize the lithium substructure in Li6PS5X as a function of temperature and anion site disorder, using Rietveld refinements against temperature-dependent neutron diffraction data. Analysis of these high-resolution diffraction data reveals an additional lithium position previously unreported for Li6PS5X argyrodites, suggesting that the lithium conduction pathway in these materials differs from the most common model proposed in earlier studies. An analysis of the Li+ positions and their radial distributions reveals that greater inhomogeneity of the local anionic charge, due to X-/S2- site disorder, is associated with more spatially diffuse lithium distributions. This observed coupling of site disorder and lithium distribution provides a possible explanation for the enhanced lithium transport in anion-disordered lithium argyrodites and highlights the complex interplay between the anion configuration and lithium substructure in this family of superionic conductors.

Ionic Conductivity of the NASICON-Related Thiophosphate Na1+x Ti2-x Gax (PS4 )3.

Inspired by the recent interest in fast ionic conducting solids for electrolytes, the ionic conductivity of a novel ionic conductor Na1+x Ti2-x Gax (PS4 )3 has been investigated. Using X-ray diffraction and impedance spectroscopy the sodium ionic conductivity in this compound was demonstrated, in which bond valence sum analysis suggests a tunnel diffusion for Na+ . Substitution with Ga3+ leads to an increasing Na+ content, an expansion of the lattice and an increasing conductivity with increasing x in Na1+x Ti2-x Gax (PS4 )3 . Given the relation to the NASICON family, upon replacement of the phosphate by a thiophosphate group, a rich structural chemistry can be expected in this class of materials. This work demonstrates the potential for making NaTi2 (PS4 )3 an ideal system to study structure-property relationships in ionic conductors.

Local Structure and Influence of Sb Substitution on the Structure-Transport Properties in AgBiSe2.

Owing to their intrinsically low thermal conductivity and chemical diversity, materials within the I-V-VI2 family, and especially AgBiSe2, have recently attracted interest as promising thermoelectric materials. However, further investigations are needed in order to develop a more fundamental understanding of the origin of the low thermal conductivity in AgBiSe2, to evaluate possible stereochemical activity of the 6s2 lone pair of Bi3+, and to further elaborate on chemical design approaches for influencing the occurring phase transitions. In this work, a combination of temperature-dependent X-ray diffraction, Rietveld refinements of laboratory X-ray diffraction data, and pair distribution function analyses of synchrotron X-ray diffraction data is used to tackle the influence of Sb substitution within AgBi1-xSbxSe2 (0 ⩽ x ⩽ 0.15) on the phase transitions, local distortions, and off-centering of the structure. This work shows that, similar to other lone-pair-containing materials, local off-centering and distortions can be found in AgBiSe2. Furthermore, electronic and thermal transport measurements, in combination with the modeling of point-defect scattering, highlight the importance of structural characterizations toward understanding changes induced by elemental substitutions. This work provides new insights into the structure-transport correlations of the thermoelectric AgBiSe2.

Comparing the Descriptors for Investigating the Influence of Lattice Dynamics on Ionic Transport Using the Superionic Conductor Na3PS4- xSe x.

Recent work on superionic conductors has demonstrated the influence of lattice dynamics and the softness of the lattice on ionic transport. When examining either the changes in the acoustic phonon spectrum or the whole phonon density of states, both a decreasing activation barrier of migration and a decreasing entropy of migration have been observed, highlighting that the paradigm of "the softer the lattice, the better" does not always hold true. However, both approaches to monitor the changing lattice dynamics probe different frequency ranges of the phonon spectrum, and thus, it is unclear if they are complementary. In this work, we investigate the lattice dynamics of the superionic conductor Na3PS4- xSe x by probing the optical phonon modes and the acoustic phonon modes, as well as the phonon density of states via inelastic neutron scattering. Notably, Raman spectroscopy shows the evolution of multiple local symmetry reduced polyhedral species, which likely affect the local diffusion pathways. Meanwhile, density functional theory and the ionic transport data are used to compare the different approaches for assessing the lattice dynamics. This work shows that, while acoustic and inelastic methods may be used to experimentally assess the overall changing lattice stiffness, calculations of the average vibrational energies between the mobile ions and the anion framework are important to assess and computationally screen for ionic conductors.

Inducing High Ionic Conductivity in the Lithium Superionic Argyrodites Li6+ xP1- xGe xS5I for All-Solid-State Batteries.

Solid-state batteries with inorganic solid electrolytes are currently being discussed as a more reliable and safer future alternative to the current lithium-ion battery technology. To compete with state-of-the-art lithium-ion batteries, solid electrolytes with higher ionic conductivities are needed, especially if thick electrode configurations are to be used. In the search for optimized ionic conductors, the lithium argyrodites have attracted a lot of interest. Here, we systematically explore the influence of aliovalent substitution in Li6+ xP1- xGe xS5I using a combination of X-ray and neutron diffraction, as well as impedance spectroscopy and nuclear magnetic resonance. With increasing Ge content, an anion site disorder is induced and the activation barrier for ionic motion drops significantly, leading to the fastest lithium argyrodite so far with 5.4 ± 0.8 mS cm-1 in a cold-pressed state and 18.4 ± 2.7 mS cm-1 upon sintering. These high ionic conductivities allow for successful implementation within a thick-electrode solid-state battery that shows negligible capacity fade over 150 cycles. The observed changes in the activation barrier and changing site disorder provide an additional approach toward designing better performing solid electrolytes.

Local Tetragonal Structure of the Cubic Superionic Conductor Na3PS4.

The sodium superionic conductor Na3PS4 is known to crystallize in one of two different structural polymorphs at room temperature (i.e., cubic or tetragonal, depending on the synthetic conditions). Experimentally, the cubic structure is known to exhibit a higher ionic conductivity than the tetragonal structure, despite theoretical investigations suggesting that there should be no difference at all. Employing a combination of Rietveld and pair distribution function (PDF) analyses, as well as electrochemical impedance spectroscopy, we investigate the open question of how the crystal structure influences the ionic transport in Na3PS4. Despite the average structures of Na3PS4 prepared via ball-milling and high-temperature routes being cubic and tetragonal, respectively, the structural analysis by PDF indicates that both compounds are best described by the structural motifs of the tetragonal polymorph on the local scale. Ultimately, the high ionic conductivity of Na3PS4 prepared by the ball-milling approach is confirmed to be independent of the crystal structure. This work demonstrates that even in ionic conductors differences can be observed between the average and local crystal structures, and it reasserts that the high ionic conductivity in Na3PS4 is not related to the crystal structure but rather differences in the defect concentration.