RESUMEN
Polar photovoltaic effect (PPE) has attracted great attention in regulating desired optoelectronic properties, which can be driven by order-disorder and displacive phase transitions. Bond-switching is also a feasible method to induce PPE, but such investigation is very rare. Lead-halide hybrid perovskite (LHHP) is an outstanding photodetection material; lead atoms possess rich coordination modes to provide possibilities to construct switchable bonds. Here, a unique perovskitizer NâPb bond-switching is disclosed to induce polar photovoltage in the emerging LHHP, PA2MHy2Pb3Br10 (1, PA = n-propylamine, MHy = methylhydrazine). Interestingly, the perovskitizer MHy+ provides 2s2 lone pair while the Pb atom affords empty d orbitals, which coordinate with each other to generate a flexible NâPb bond. Further, the introduction of NâPb bonds results in a high distortion of the PbBr6 octahedron to form local polarity and further orientation to induce spontaneous polarization. More importantly, such a flexible NâPb bond switching mechanism drives a notable PPE and controllable polarized photo-response, a polarization ratio up to 9.7 at the polar phase in striking contrast with the non-polar phase (1.03). The work provides the first demonstration of bond-switching to induce polar phase transition and polar photovoltage in the photoconductive hybrid perovskites for photoelectric applications.
RESUMEN
2D multilayered organic-inorganic hybrid perovskites (OIHPs) have exhibited bright prospects for high-performance self-driven X-ray detection due to their strong radiation absorption and long carrier transport. However, as an effective tool for self-driven X-ray detection, radiation photovoltaics remain rare, and underdeveloped in multilayered OIHPs. Herein, chirality to induce radiation photovoltaics in 2D multilayered chiral OIHPs is first utilized for efficient self-driven X-ray detection. Specifically, under X-ray irradiation, a multilayered chiral-polar (S-BPEA)2FAPb2I7 (1-S, S-BPEA = (S)-1-4-Bromophenylethylammonium, FA = formamidinium) shows remarkable radiation photovoltaics of 0.85 V, which endows 1-S excellent self-driven X-ray detection performance with a considerable sensitivity of 87.8 µC Gyair -1 cm-2 and a detection limit low to 161 nGyair s-1. Moreover, the sensitivity is high up to 1985.9 µC Gyair -1 cm-2 under 80 V bias, higher than most those of 2D OIHPs. These results demonstrate that chirality-induced radiation photovoltaics is an efficient strategy for self-driven X-ray detection.
RESUMEN
Lead halide hybrid perovskites have made great progress in direct X-ray detection and broadband photodetection, but the existence of toxic Pb and the demand for external operating voltage have severely limited their further applications and operational stability improvements. Therefore, exploring "green" lead-free hybrid perovskite that can both achieve X-ray detection and broadband photodetection without external voltage is of great importance, but remains severely challenging. Herein, using centrosymmetric (BZA)3BiI6 (1, BZA = benzylamine) as a template, a pair of chiral-polar lead-free perovskites, (BZA)2(R/S-PPA)BiI6 (2-R/S, R/S-PPA = (R/S)-1-Phenylpropylamine) are successfully obtained by introducing chiral aryl cations of (R/S)-1-Phenylpropylamine. Compared to 1, chiral-polar 2-R presents a significant irradiation-responsive bulk photovoltaic effect (BPVE) with an open circuit photovoltage of 0.4 V, which enables it with self-powered X-ray, UV-vis-NIR broadband photodetection. Specifically, 2-R device exhibits an ultralow detection limit of 18.5 nGy s-1 and excellent operational stability. Furthermore, 2-R as the first lead-free perovskite achieves significant broad-spectrum (377-940 nm) photodetection via light-induced pyroelectric effect. This work sheds light on the rational crystal reconstruction engineering and design of "green" hybrid perovskite toward high-demanded self-powered radiation detection and broadband photodetection.
RESUMEN
The low-toxic and environmentally friendly 2D lead-free perovskite has made significant progress in the exploration of "green" X-ray detectors. However, the gap in detection performance between them and their lead-based analogues remains a matter of concern that cannot be ignored. To reduce this gap, shortening the interlayer spacing to accelerate the migration and collection of X-ray carriers is a promising strategy. Herein, a Dion-Jacobson (DJ) lead-free double perovskite (4-AP)2AgBiBr8 (1, 4-AP = 4-amidinopyridine) with an ultra-narrow interlayer spacing of 3.0 Å, is constructed by utilizing π-conjugated aromatic spacers. Strikingly, the subsequent enhanced carrier transport and increased crystal density lead to X-ray detectors based on bulk single crystals of 1 with a high sensitivity of 1117.3 µC Gy-1 cm-2, superior to the vast majority of similar double perovskites. In particular, the tight connection of the inorganic layers by the divalent cations enhances structural rigidity and stability, further endowing 1 detector with ultralow dark current drift (3.06 × 10-8 nA cm-1 s-1 V-1, 80 V), excellent multiple cycles switching X-ray irradiation stability, as well as long-term environmental stability (maintains over 94% photoresponse after 90 days). This work brings lead-free double perovskites one step closer to realizing efficient practical green applications.
RESUMEN
Three-dimensional (3D) organic-inorganic hybrid perovskites (OIHPs) have achieved tremendous success in direct X-ray detection due to their high absorption coefficient and excellent carrier transport. However, owing to the centrosymmetry of classic 3D structures, these reported X-ray detectors mostly require external electrical fields to run, resulting in bulky overall circuitry, high energy consumption, and operational instability. Herein, we first report the unprecedented radiation photovoltage in 3D OIHP for efficient self-driven X-ray detection. Specifically, the 3D polar OIHP MhyPbBr3 (1, Mhy=methylhydrazine) shows an intrinsic radiation photovoltage (0.47â V) and large mobility-lifetime product (1.1×10-3 â cm2 V-1 ) under X-ray irradiation. Strikingly, these excellent physical characteristics endow 1 with sensitive self-driven X-ray detection performance, showing a considerable sensitivity of 220â µC Gy-1 cm-2 , which surpasses those of most self-driven X-ray detectors. This work first explores highly sensitive self-driven X-ray detection in 3D polar OIHPs, shedding light on future practical applications.
RESUMEN
Metal halide perovskite ferroelectrics combining spontaneous polarization and excellent semiconducting properties is an ideal platform for enabling self-driven X-ray detection, however, achievements to date have been only based on uniaxiality, which increases the complexity of device fabrication. Multi-axial ferroelectric materials have multiple equivalent polarization directions, making them potentially amenable to multi-axial self-driven X-ray detection, but the report on these types of materials is still a huge blank. Herein, a high-quality (BA)2(EA)2Pb3I10 (1) biaxial ferroelectric single crystal was successfully grown, which exhibited significant spontaneous polarization along the c-axis and b-axis. Under X-ray irradiation, bulk photovoltaic effect (BPVE) was exhibited along both the c-axis and b-axis, with open circuit voltages (Voc) of 0.23 V and 0.22 V, respectively. Then, the BPVE revealed along the inversion of polarized direction with the polarized electric fields. Intriguingly, due to the BPVE of 1, 1 achieved multi-axial self-driven X-ray detection for the first time (c-axis and b-axis) with relatively high sensitivities and ultralow detection limits (17.2 nGyair s-1 and 19.4 nGyair s-1, respectively). This work provides a reference for the subsequent use of multi-axial ferroelectricity for multi-axial self-driven optoelectronic detection.
RESUMEN
Chiral hybrid perovskites combine the advantages of chiral materials and halide perovskites, offering an ideal platform for the design of circularly polarized light (CPL) detectors. The pyro-phototronic effect, as a special mechanism of the photoexcited pyroelectric signal, can significantly improve the performance of photodetectors, whereas it remains a great challenge to achieve pyroelectricity-based CPL detection. In this work, the chiroptical phenomena and the pyro-phototronic effect are combined in chiral-polar perovskites to achieve unprecedented pyroelectric-based CPL detection. Two novel two-dimensional (2D) lead-free chiral-polar double perovskites, S/R-[(4-aminophenyl)ethylamine]2AgBiI8·0.5H2O, are successfully designed and synthesized by introducing chiral organic ligands into metal halide frameworks. Strikingly, the photoresponse is substantially boosted with the support of the pyro-phototronic effect, showing an increased pyro-phototronic current that is 40 times greater than the photovoltaic current. Furthermore, the pyroelectric-based detector possesses excellent CPL detection capacity to distinguish different polarization states of CPL photons, which achieve an impressive glph of up to 0.27 at zero bias. This study provides a brand new process for CPL detection by utilizing the pyro-phototronic effect in chiral-polar perovskites, which opens a new avenue for chiral materials in optoelectronic applications.
RESUMEN
Heterojunctions are a promising class of materials for high-efficiency bifunctional oxygen electrocatalysts in both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). However, the conventional theories fail to explain why many catalysts behave differently in ORR and OER, despite a reversible path (* O2 â* OOHâ* Oâ* OH). This study proposes the electron-/hole-rich catalytic center theory (e/h-CCT) to supplement the existing theories, it suggests that the Fermi level of catalysts determines the direction of electron transfer, which affects the direction of the oxidation/reduction reaction, and the density of states (DOS) near the Fermi level determines the accessibility for injecting electrons and holes. Additionally, heterojunctions with different Fermi levels form electron-/hole-rich catalytic centers near the Fermi levels to promote ORR/OER, respectively. To verify the universality of the e/h-CCT theory, this study reveals the randomly synthesized heterostructural Fe3 N-FeN0.0324 (Fex N@PC with DFT calculations and electrochemical tests. The results show that the heterostructural F3 N-FeN0.0324 facilitates the catalytic activities for ORR and OER simultaneously by forming an internal electron-/hole-rich interface. The rechargeable ZABs with Fex N@PC cathode display a high open circuit potential of 1.504 V, high power density of 223.67 mW cm-2 , high specific capacity of 766.20 mAh g-1 at 5 mA cm-2 , and excellent stability for over 300 h.
RESUMEN
Chiral perovskites have been demonstrated as promising candidates for direct circularly polarized light (CPL) detection due to their intrinsic chirality and excellent charge transport ability. However, chiral perovskite-based CPL detectors with both high distinguishability of left- and right-handed optical signals and low detection limit remain unexplored. Here, a heterostructure, (R-MPA)2 MAPb2 I7 /Si (MPA = methylphenethylamine, MA = methylammonium) is constructed, to achieve high-sensitive and low-limit CPL detection. The heterostructures with high crystalline quality and sharp interface exhibit a strong built-in electric field and a suppressed dark current, not only improving the separation and transport of the photogenerated carriers but also laying a foundation for weak CPL signals detection. Consequently, the heterostructure-based CPL detector obtains a high anisotropy factor up to 0.34 with a remarkably low CPL detection limit of 890 nW cm-2 under the self-driven mode. As a pioneering study, this work paves the way for designing high-sensitive CPL detectors that simultaneously have great distinguishing capability and low detection limit of CPL.
RESUMEN
Osimertinib is a highly selective third-generation irreversible inhibitor of epidermal growth factor receptor mutant, which can be utilized to treat non-small cell lung cancer. As the substrate of cytochrome P450 enzyme, it is mainly metabolized by the CYP3A enzyme in humans. Among the metabolites produced by osimertinib, AZ5104, and AZ7550, which are demethylated that is most vital. Nowadays, deuteration is a new design approach for several drugs. This popular strategy is deemed to improve the pharmacokinetic characteristics of the original drugs. Therefore, in this study the metabolism profiles of osimertinib and its deuterated compound (osimertinib-d3) in liver microsomes and human recombinant cytochrome P450 isoenzymes and the pharmacokinetics in rats and humans were compared. After deuteration, its kinetic isotope effect greatly inhibited the metabolic pathway that produces AZ5104. The plasma concentration of the key metabolite AZ5104 of osimertinib-d3 in rats and humans decreased significantly compared with that of the osimertinib. This phenomenon was consistent with the results of the metabolism studies in vitro. In addition, the in vivo results indicated that osimertinib-d3 had higher systemic exposure (AUC) and peak concentration (Cmax ) compared with the osimertinib in rats and human body.
Asunto(s)
Carcinoma de Pulmón de Células no Pequeñas , Neoplasias Pulmonares , Humanos , Ratas , Animales , Carcinoma de Pulmón de Células no Pequeñas/tratamiento farmacológico , Neoplasias Pulmonares/tratamiento farmacológico , Indoles , Acrilamidas/metabolismo , Acrilamidas/farmacología , Compuestos de Anilina/metabolismo , Compuestos de Anilina/farmacología , Microsomas Hepáticos/metabolismoRESUMEN
Chiral three-dimensional hybrid organic-inorganic perovskites (3D HOIPs) would show unique chiroptoelectronic performance due to the combination of chirality and 3D structure. However, the synthesis of 3D chiral HOIPs remains a significant challenge. Herein, we constructed a pair of unprecedented 3D chiral halide perovskitoids (R/S-BPEA)EA6 Pb4 Cl15 (1-R/S) (R/S-BPEA=(R/S)-1-4-Bromophenylethylammonium, EA=ethylammonium), in which the large chiral cations can be contained in the big "hollow" inorganic frameworks induced by mixing cations. Notably, 3D 1-R/S shows natural chiroptical activity, as evidenced by its significant mirror circular dichroism spectra and the ability to distinguish circularly polarized light. Moreover, based on the unique 3D structure, 1-S presents sensitive X-ray detection performance with a low detection limit of 398â nGyair s-1 , which is 14â times lower than the regular medical diagnosis of 5.5â µGyair s-1 . In this work, 3D chiral halide perovskitoids provide a new route to develop chiral material in spintronics and optoelectronics.
RESUMEN
The targeted cleavage of the C-N bonds of alkyl primary amines in sustainable compounds of biomass according to a metal-free pathway and the conjunction of nitrogen in the synthesis of imidazo[1,5-a]pyridines are still highly challenging. Despite tremendous progress in the synthesis of imidazo[1,5-a]pyridines over the past decade, many of them can still not be efficiently prepared. Herein, we report an anomeric stereoauxiliary approach for the synthesis of a wide range of imidazo[1,5-a]pyridines after cleaving the C-N bond of d-glucosamine (α-2° amine) from biobased resources. This new approach expands the scope of readily accessible imidazo[1,5-a]pyridines relative to existing state-of-the-art methods. A key strategic advantage of this approach is that the α-anomer of d-glucosamine enables C-N bond cleavage via a seven-membered ring transition state. By using this novel method, a series of imidazo[1,5-a]pyridine derivatives (>80 examples) was synthesized from pyridine ketones (including para-dipyridine ketone) and aldehydes (including para-dialdehyde). Imidazo[1,5-a]pyridine derivatives containing diverse important deuterated C(sp2 )-H and C(sp3 )-H bonds were also efficiently achieved.
Asunto(s)
Glucosamina , Imidazoles , Aldehídos/química , Aminas , Imidazoles/química , Cetonas/química , Piridinas/químicaRESUMEN
Two new extended polyoxometalate (POM) architectures based on lanthanide-incorporated polyoxoniobate (Ln-incorporated PONb) cages, namely, H4[CuII(en)2]4{K4(H2O)2[CuII(en)2]5[CuII5(trz)2(en)4(OH)2][Dy2CuII2(en)2(CO3)3(H2O)2(OH)3][Dy(H2O)4][DyNb23O68(H2O)4]2}·60H2O (1, en = ethylenediamine) and H20[CuII(en)2]4{[CuII(en)2]4[Dy2(C2O4)(H2O)4]2[(Nb32(OH)4(H2O)3O89]2}·54H2O (2), have been successfully synthesized and structurally characterized, demonstrating a feasible strategy to develop functional POM materials. In addition, the proton conductivity and magnetic behaviors of both 1 and 2 were studied.
RESUMEN
Cup-shaped molecules are of great interest due to their appealing architectures and properties. Compared with widely studied calixarenes, polyoxometalate-based cup-shaped molecules currently remain a virgin land waiting for exploration. In this work, we report the first discovery of two giant cup-shaped inorganic-organic hybrid polyoxoniobates (PONbs) of {Cu12 Nb120 } and {Cd16 Nb128 }. The former integrates three tricyclic Nb24 clusters and a hexacyclic Nb48 cluster into a cup-shaped molecule via a Cu12 metallacalixarene, while the latter unifies two tricyclic Nb24 clusters and a brand-new pentacyclic Nb40 cluster into another cup-shaped molecule via a hybrid Cd16 unit. With 132 and 144 metal centers, {Cu12 Nb120 } and {Cd16 Nb128 } show the largest two inorganic-organic hybrid PONbs known to date.
RESUMEN
6-Hydroxykynurenic acid (6-HKA) is a nitrogen-containing phenolic acid compound in Ginkgo biloba leaves. The pharmacological activities of 6-HKA have been reported and shown that 6-HKA has the potential to become a therapeutic drug and may play an important role in the treatment of nervous system diseases. However, there are few studies on the drug metabolism and transport of 6-HKA. The aim of this study is to investigate the in vitro metabolism of 6-HKA and its interaction with multiple important drug transporters.The in vitro metabolism experiments in the present study demonstrate that 6-HKA might not undergo phase-I or phase-II metabolism in hepatic microsomes/S9 of rats. In addition, some drug transporters, including OAT1/3, OCT2, MDR1, OATP1B1, MATE1/2K and OCTN2, were investigated. The cellular uptake assays indicate that 6-HKA exhibits inhibition to the transport of classical substrates mediated by OAT3, OCT2, MATE2K and OCTN2 but has no significant effect on the transport of substrates mediated by MDR1, OAT1, OATP1B1 or MATE1. Further investigation of cellular accumulation assays shows that 6-HKA might be the substrate of OAT3, but not OCT2 or OCTN2. The bidirectional transport study suggests that 6-HKA is not a substrate of MDR1.The information about the in vitro metabolism of 6-HKA and the interaction between 6-HKA and some transporters will help us to better understand the pharmacokinetic properties of 6-HKA and provide reference for its pharmacodynamics, DDIs and drug-food interactions studies.
Asunto(s)
Ginkgo biloba , Microsomas Hepáticos , Animales , Transporte Biológico , Ácido Quinurénico/análogos & derivados , Extractos Vegetales , RatasRESUMEN
Thioredoxin 1 (Trx1) and telomerase play key roles in the development and progression process of most tumors, and they both are promising drug therapy targets. We have, for the first time, discovered that Trx1 and telomerase had a dual-target synergistic effect. Based on that results, we designed a series of 6-dithio-2'-deoxyguanosine analogs (named as YLS00X) and verified whether they can inhibit Trx1 and telomerase simultaneously. TrxR1/Trx1 system activity and telomerase expression were significantly inhibited by 6-dithio-2'-deoxyguanosine analogs, especially YLS004. YLS004 can also cause ROS accumulation, and induce tumor cell apoptosis. The vitro antitumor activity of 6-dithio-2'-deoxyguanosine analogs using MTT assay on 11 different human cancer cells and found that human colon cancer cells(HCT116) and melanoma cells (A375) were the most sensitive cells to 6-dithio-2'-deoxyguanosine analogs treatment and vivo xenografts models also confirmed that. The serum biochemical parameters and multiple organs HE staining results of subacute experiments indicated that YLS004 might be mildly toxic to immune organs, including the thymus, spleen, and hematopoietic system. Besides, YLS004 was rapidly metabolized in the rats' blood. Our study revealed that YLS004, a Trx1 and telomerase inhibitor, has strong anti-tumor effects to colon cancer and melanoma cells and is a promising new candidate drug.
Asunto(s)
Desoxiguanosina/análogos & derivados , Desoxiguanosina/administración & dosificación , Sistemas de Liberación de Medicamentos/métodos , Especies Reactivas de Oxígeno/agonistas , Telomerasa/antagonistas & inhibidores , Tiorredoxinas/antagonistas & inhibidores , Células A549 , Animales , Antineoplásicos/administración & dosificación , Antineoplásicos/química , Apoptosis/efectos de los fármacos , Apoptosis/fisiología , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Supervivencia Celular/fisiología , Relación Dosis-Respuesta a Droga , Células HCT116 , Células HT29 , Células Hep G2 , Humanos , Células K562 , Masculino , Ratones , Ratones Endogámicos BALB C , Ratones Desnudos , Ratas , Especies Reactivas de Oxígeno/metabolismo , Telomerasa/metabolismo , Tiorredoxinas/metabolismoRESUMEN
A rare 3D porous inorganic-organic polyoxoniobate framework based on the cubic polyoxoniobate-cupric-complex cage {[Cu(en)2]@{[Cu2(en)2(trz)2]6(Nb68O188)}} (1a), has been successfully synthesized by a hydrothermal method. The cubic cages 1a are connected with 4-(tetrazol-5-yl)pyridine to form a 1D pillar-like chain structure, and every 1D pillar-like chain is further linked with four adjacent pillar-like chains by the [Cu(en)2]2+ complex to form a 3D porous inorganic-organic polyoxoniobate framework with 4-connected CdSO4-type topology. To our knowledge, it is the first time that three different types of organic ligands are simultaneously introduced into one polyoxoniobate. This material also exhibits a high vapor adsorption capacity and good ionic conductivity properties.
RESUMEN
Artificially sulfated polysaccharides, as the mimetics of native heparin and heparan sulfate, are important bioactive compounds, since they show great potential for tuning crucial biological activities within living organisms. Herein, we summarize progress in the development of artificially sulfated polysaccharides, such as cellulose sulfate, chitosan sulfate, and other sulfated polysaccharides, with a particular focus on the fields of biomedical and bioengineering applications in the past ten years. Their effects on cell growth and differentiation, but also as building blocks for drug carriers and medical implants, are emphasized.
Asunto(s)
Diferenciación Celular/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Portadores de Fármacos/química , Polisacáridos/química , Ésteres del Ácido Sulfúrico/química , Animales , Materiales Biomiméticos/química , Línea Celular , Glicosaminoglicanos/química , Ingeniería de Tejidos/métodosRESUMEN
The combination of polyoxoniobates (PONbs) with 3d metal ions, azoles, and organoamines is a general synthetic procedure for making unprecedented PONb metal complex cage materials, including discrete molecular cages and extended cage frameworks. By this method, the first two PONb metal complex cages K4 @{[Cu29 (OH)7 (H2 O)2 (en)8 (trz)21 ][Nb24 O67 (OH)2 (H2 O)3 ]4 } and [Cu(en)2 ]@{[Cu2 (en)2 (trz)2 ]6 (Nb68 O188 )} have been made. The former exhibits a huge tetrahedral cage with more than 120 metal centers, which is the largest inorganic-organic hybrid PONb known to date. The later shows a large cubic cage, which can act as building blocks for cage-based extended assembly to form a 3D cage framework {[Cu(en)2 ]@{[Cu2 (trz)2 (en)2 ]6 [H10 Nb68 O188 ]}}. These materials exhibit visible-light-driven photocatalytic H2 evolution activity and high vapor adsorption capacity. The results hold promise for developing both novel cage materials and largely unexplored inorganic-organic hybrid PONb chemistry.
RESUMEN
Tacrolimus is a potent, narrow therapeutic index, immunosuppressive drug used to avoid organ rejection in patients that have undergone organ transplantation. Dissolution tests are widely used to evaluate drug product quality and performance. Analysis of tacrolimus during dissolution testing is sensitive to several factors, such as sample solution storage time and container material. The filtration process, tacrolimus glass adsorption, and sample solution storage time are found to impact the tacrolimus dissolution results. Based on observations in this work, the use of G4 or equivalent filter flush before collection and polypropylene test tubes or vials instead of glass test tubes or vials are recommended for tacrolimus drug product dissolution test.