Surface-Enhanced Raman Spectroscopy for Identification of Heavy Metal Arsenic(V)-Mediated Enhancing Effect on Antibiotic Resistance.

Bacterial antibiotic resistance poses a threat to global public health. Restricted usage of antibiotics does not necessarily prevent its continued emergence. Rapid and sensitive screening of triggers, in addition to antibiotic, and exploring the underlying mechanism are still major challenges. Herein, by developing a homogeneous vacuum filtration-based bacterial sample fabrication enabling high surface-enhanced Raman scattering (SERS) reproducibility across multiple bacterial samples and negating interfering spectral variations from inhomogeneous sample geometry and SERS enhancement, SERS was employed to study heavy metal arsenic [As(V)]-mediated antibiotic resistance in a robust, sensitive, and rapid fashion. Independent and robust spectral changes representing phenotypic bacterial responses, combined with multivariate analysis, clearly identified that As(V) enhanced antibiotic resistance to tetracycline (Tet). Similar spectral alteration profile to As(V) and Tet indicated that cross-resistance, whereby As(V)-induced bacterial resistance simultaneously blocked Tet action, could account for the enhanced resistance. The sensitive, robust, and rich phenotypic profile provided by SERS, combined with additional advantages in imposing no need to cultivate bacteria and single-cell sensitivity, can be further exploited to evaluate resistance-intervening factors in real microbiota.

Dosage- and time-dependent antibacterial effect of zinc oxide nanoparticles determined by a highly uniform SERS negating undesired spectral variation.

Massive production of nanomaterials poses a high risk to environmental ecology and human health. However, comprehensive understanding of nanotoxicity is still a major challenge due to the limitations of assessment methods, especially at the molecular level. We developed a new, sensitive, and robust fingerprinting surface-enhanced Raman spectroscopy (SERS) approach to interrogate both dose- and time-dependent phenotypic bacterial responses to zinc oxide nanoparticles (ZnO NPs). SERS enhancement was provided by biocompatible Au NPs. Additionally, a novel vacuum filtration-based strategy was adopted to fabricate bacterial samples with highly uniform SERS signals, ensuring the acquisition of robust and independent spectral changes from ZnO NPs-impacted bacteria without undesirable spectral variations. Combined with multivariate analysis, clear and informative spectral alteration profiles were obtained. Much greater alterations were found in low-dose ranges than high-dose ranges, indicating a reduction in the bioavailability of ZnO NPs with doses. Time-resolved bacterial responses provided important information on toxic dynamics, i.e., rapid action of ZnO NPs within 0.5 h was identified, and ZnO NPs at low doses and long exposure time exerted similar effects to high doses, indicating the concerns associated with low-dose exposure. Further analysis of biochemical changes revealed metabolic activity decrease over both incubation time and doses. Meanwhile, a short-term protection strategy of bacteria by producing lipid-containing outer membrane vesicles to mitigate the cell of toxic NPs was suggested. Finally, Zn(2+) ions released from NPs were demonstrated to be irrelevant to bacterial responses on both dose and time scales. The new SERS methodology can potentially profile a large variety of toxic NPs and advance our understanding of nanotoxicity. Graphical Abstract A highly uniform SERS signal of bacteria negating undesired spectral variation via a novel vacuum filtration-based strategy, combined with multivariate PCA-LDA analysis, was utilized to interrogate both dose- and time-dependent antibacterial effect of zinc oxide nanoparticles, and can be extended to a variety of other toxic nanoparticles.

The antibacterial and anti-biofouling performance of biogenic silver nanoparticles by Lactobacillus fermentum.

Biofouling is a major challenge in the water industry and public health. Silver nanoparticles (AgNPs) have excellent antimicrobial properties and are considered to be a promising anti-biofouling agent. A modified method was used to produce small sized and well-dispersed biogenic silver nanoparticles with a mean size of ~6 nm (Bio-Ag0-6) using Lactobacillus fermentum. The morphology, size distribution, zeta potential and oxidation state of the silver were systematically characterized. Determination of minimal inhibitory and bactericidal concentration results revealed that biogenic silver Bio-Ag(0-6) can effectively suppress the growth of the test bacteria. Additionally, the inhibition effects of Bio-Ag(0-6) on biofilm formation and on established biofilms were evaluated using P. aeruginosa (ATCC 27853) as the model bacterium. The results from microtiter plates and confocal laser scanning microscopy demonstrated that Bio-Ag(0-6) not only exhibited excellent antibacterial performance but also could control biofilm formation and induce detachment of the bulk of P. aeruginosa biofilms leaving a small residual matrix.

Early signs of neurodegenerative diseases: Possible mechanisms and targets for Golgi stress.

The Golgi apparatus plays a crucial role in mediating the modification, transport, and sorting of intracellular proteins and lipids. The morphological changes occurring in the Golgi apparatus are exceptionally important for maintaining its function. When exposed to external pressure or environmental stimulation, the Golgi apparatus undergoes adaptive changes in both structure and function, which are known as Golgi stress. Although certain signal pathway responses or post-translational modifications have been observed following Golgi stress, further research is needed to comprehensively summarize and understand the related mechanisms. Currently, there is evidence linking Golgi stress to neurodegenerative diseases; however, the role of Golgi stress in the progression of neurodegenerative diseases such as Alzheimer's disease remains largely unexplored. This review focuses on the structural and functional alterations of the Golgi apparatus during stress, elucidating potential mechanisms underlying the involvement of Golgi stress in regulating immunity, autophagy, and metabolic processes. Additionally, it highlights the pivotal role of Golgi stress as an early signaling event implicated in the pathogenesis and progression of neurodegenerative diseases. Furthermore, this study summarizes prospective targets that can be therapeutically exploited to mitigate neurodegenerative diseases by targeting Golgi stress. These findings provide a theoretical foundation for identifying novel breakthroughs in preventing and treating neurodegenerative diseases.

In situ study of the antibacterial activity and mechanism of action of silver nanoparticles by surface-enhanced Raman spectroscopy.

Silver nanoparticles (Ag NPs) are extensively used as an antibacterial additive in commercial products and their release has caused environmental risk. However, conventional methods for the toxicity detection of Ag NPs are very time consuming and the mechanisms of action are not clear. We developed a new, in situ, rapid, and sensitive fingerprinting approach, using surface-enhanced Raman spectroscopy (SERS), to study the antibacterial activity and mechanism of Ag NPs of 80 and 18 nm (Ag80 and Ag18, respectively), by using the strong electromagnetic enhancement generated by Ag NPs. Sensitive spectra changes representing various biomolecules in bacteria were observed with increasing concentrations of Ag NPs. They not only allowed SERS to monitor the antibacterial activity of Ag NPs of different sizes in different water media but also to study the antibacterial mechanism at the molecular level. Ag18 were found to be more toxic than Ag80 in water, but their toxicity declined to a similar level in the PBS medium. The antibacterial mechanism was proposed on the basis of a careful identification of the chemical origins by comparing the SERS spectra with model compounds. The dramatic change in protein, hypoxanthine, adenosine, and guanosine bands suggested that Ag NPs have a significant impact on the protein and metabolic processes of purine. Finally, by adding nontoxic and SERS active Au NPs, SERS was successfully utilized to study the action mode of the NPs unable to produce an observable SERS signal. This work opens a window for the future extensive SERS studies of the antibacterial mechanism of a great variety of non-SERS-active NPs.

Comparative Study of Membrane Fouling with Aeration Shear Stress in Filtration of Different Substances.

The formation process of membrane fouling is complex and diverse, which is an important problem that needs to be overcome in membrane applications. In this paper, three foulant systems consisting of humic acid, humic acid plus Ca2+ and humic acid plus Ca2+ plus yeast were selected to compare membrane fouling processes with different aeration intensities. The aim was to establish the quantitative relationship between membrane fouling rate and shear stress, respectively, in a large-scale flat sheet MBR (FSMBR). The shear stress values at different aeration intensities were obtained using computational fluid dynamics (CFD). The membrane fouling rate during the filtration of different substances was measured by performing experiments. The comparison results showed that the membrane fouling rate varied greatly during the filtration of different substances. With the help of particle size distribution, the effect of different shear forces on floc size was further explored. Using the dual control of fouling rate and floc size, the recommended aeration intensity was 6~8 L/(m2·min).

Recent advances on graphyne and its family members as membrane materials for water purification and desalination.

Graphyne and its family members (GFMs) are allotropes of carbon (a class of 2D materials) having unique properties in form of structures, pores and atom hybridizations. Owing to their unique properties, GFMs have been widely utilized in various practical and theoretical applications. In the past decade, GFMs have received considerable attention in the area of water purification and desalination, especially in theoretical and computational aspects. More recently, GFMs have shown greater prospects in achieving optimal separation performance than the experimentally derived commercial polyamide membranes. In this review, recent theoretical and computational advances made in the GFMs research as it relates to water purification and desalination are summarized. Brief details on the properties of GFMs and the commonly used computational methods were described. More specifically, we systematically reviewed the various computational approaches employed with emphasis on the predicted permeability and selectivity of the GFM membranes. Finally, the current challenges limiting their large-scale practical applications coupled with the possible research directions for overcoming the challenges are proposed.

Optimization of Preparation Conditions of Poly(m-phenylene isophthalamide) PMIA Hollow Fiber Nanofiltration Membranes for Dye/Salt Wastewater Treatment.

Externally selective thin film composite (TFC) hollow fiber (HF) nanofiltration membranes (NFMs) hold great industrial application prospects because of their high surface area module. However, the complicated preparation process of the membrane has hindered its mass manufacture and application. In this work, PMIA TFC HF NFMs were successfully prepared by the interfacial polymerization (IP) of piperazine (PIP) with 1,3,5-benzenetricarbonyl trichloride (TMC). The effect of the membrane preparation conditions on their separation performance was systematically investigated. The characterized results showed the successful formation of a polyamide (PA) separation layer on PMIA HF substrates by the IP process. The as-prepared HF NFMs' performance under optimized conditions achieved the highest pure water permeability (18.20 L·m−2·h−1, 0.35 MPa) and superior salt rejection in the order: RNa2SO4 (98.30%) > RMgSO4 (94.60%) > RMgCl2 (61.48%) > RNaCl (19.24%). In addition, the as-prepared PMIA HF TFC NFMs exhibited desirable pressure resistance at various operating bars and Na2SO4 feed concentrations. Excellent separation performance of chromotrope 2B dye was also achieved. The as-prepared PMIA HF NFMs thus show great promise for printing and dyeing wastewater treatment.

Construction of PPSU-MoS2/PA-MIL-101(Cr) Membrane with Highly Enhanced Permeance and Stability for Organic Solvent Nanofiltration.

Membranes with excellent separation performance and stability are needed for organic solvent nanofiltration in industrial separation and purification processes. Here we reported a newly PPSU-MoS2/PA-MIL-101(Cr) composite membrane with high permeance, good selectivity and stability. The MIL-101(Cr) was introduced in the polyamide (PA) layer via the PIP/TMC interfacial polymerization process on a microporous PPSU-MoS2 substrate. At a small doping amount of 0.005 wt% MIL-101(Cr), the PPSU-MoS2/PA-MIL-101(Cr) composite membrane exhibited a high methanol permeance of 12.03 L m-2 h-1 bar-1, twice higher than that of the pristine membrane without sacrificing selectivity. Furthermore, embedding MIL-101(Cr) notably enhanced the stability of the composite membrane, with permeance only decreasing by 8% after a long time operation of 80 h (pristine membrane decreased by 25%). This work demonstrated a composite membrane modified by MIL-101(Cr) with superior separation performance, which provides potential application of MOF materials for high-performance membranes in organic solvent nanofiltration and a theoretical foundation for future research in studying MOF's influence on membrane properties.

Tailoring Morphology and Properties of Tight Utrafiltration Membranes by Two-Dimensional Molybdenum Disulfide for Performance Improvement.

To enhance the permeation and separation performance of the polyethersulfone (PES) tight ultrafiltration (TUF) membrane, two-dimensional molybdenum disulfide (MoS2) was applied as a modifier in low concentrations. The influence of different concentrations of MoS2 (0, 0.25, 0.50, 1.00, and 1.50 wt%) on TUF membranes was investigated in terms of morphology, mechanical strength properties, permeation, and separation. The results indicate that the blending of MoS2 tailored the microstructure of the membrane and enhanced the mechanical strength property. Moreover, by embedding an appropriate amount of MoS2 into the membrane, the PES/MoS2 membranes showed improvement in permeation and without the sacrifice of the rejection of bovine serum protein (BSA) and humic acid (HA). Compared with the pristine membrane, the modified membrane embedded with 0.5 wt% MoS2 showed a 36.08% increase in the pure water flux, and >99.6% rejections of BSA and HA. This study reveals that two-dimensional MoS2 can be used as an effective additive to improve the performance and properties of TUF membranes for water treatment.

Hydrogen Peroxide-triggered Chemical Strategy for Controlling CRISPR systems.

The function of the CRISPR system can be conditionally controlled through rationally guided RNA engineering such that the target sequences can be precisely selected and manipulated. In particular, gRNA, as an important component of the CRISPR system, provides a unique tool for multifunctional control of the system based on the structure of the RNA itself. Therefore, we introduced here a protective group on the 2'-OH position of RNA to inhibit RNA-guided nucleic acid cleavage. Next, the modified gRNA can restore its original function under the chemical stimulation of hydrogen peroxide to realize the control of the CRISPR system. The experiment result demonstrated that the operating mechanism of this strategy may be based on chemical modifications that reduce the number of complementary base pairs between RNAs and targets, and the RNA-protein interaction. This further enriches the toolbox of conditional control of CRISPR function and has broad potential for gene editing in living cells and disease treatment using endogenous hydrogen peroxide.

Norbornene-tetrazine ligation chemistry for controlling RNA-guided CRISPR systems.

In the present study, norbornene-tetrazine ligation chemistry is harnessed for developing clickable RNA switches in biological contexts. This RNA control strategy is explored with a variety of applications. We further demonstrate the application of RNA-based norbornene-tetrazine ligation chemistry for controlling CRISPR systems. Moreover, the manipulation of gene editing in human cells is accomplished.

2D TiVCT x layered nanosheets grown on nickel foam as highly efficient electrocatalysts for the hydrogen evolution reaction.

Exploring highly efficient and durable catalysts for the hydrogen evolution reaction (HER) is crucial for the hydrogen economy and environmental protection issues. Numerous studies have now found that transition metal carbide MXenes are ideal candidates as catalysts for the hydrogen evolution reaction. However, MXenes are inclined to easily undergo lamellar structure agglomeration and stacking, which impedes their further applications. Besides, most of the extant research has focused on single transition metal carbides, and the investigation of double transition metal carbide MXenes is rather rare. In this research work, a three-dimensional (3D) TiVCT x -based conductive electrode was constructed by depositing 2D TiVCT x nanosheets on 3D network structured nickel foam (NF) to synthesize a hybrid electrode material (abbreviated as TiVCT x @NF). TiVCT x @NF exhibits efficient electrochemical properties with a low overpotential of 151 mV at 10 mA cm-2 and a small Tafel slope of 116 mV dec-1. Benefitting from the open layer structure and strong interfacial coupling effect, compared to the pristine structure, the resulting TiVCT x @NF has greatly increased active sites for the hydrogen evolution reaction (HER) and encounters less resistance for charge transfer. In addition, TiVCT x @NF exhibits better stability in long-term acidic electrolytes. This work provides a tactic to prepare three-dimensional network electrode materials and broadens the application of single transition metal carbide MXenes as water splitting electrodes in the HER, which is beneficial to the application of noble metal-free electrocatalysts.

Sensitive and versatile detection of the fouling process and fouling propensity of proteins on polyvinylidene fluoride membranes via surface-enhanced Raman spectroscopy.

Membrane fouling is the major drawback of membrane-based technologies because it will lead to severe flux declines and the need to clean or replace the fouled membrane. A technique capable of early diagnosis, process monitoring, and evaluation of the role of different foulants playing in the fouling process is crucial for the fouling control. We develop surface-enhanced Raman spectroscopy (SERS) as a new and versatile tool to investigate the fouling process of protein on PVDF (polyvinylidene fluoride) membranes as well as the fouling propensity of three different proteins. We optimized the aggregation level and volume of SERS-active Ag sol and the spectra acquisition method combined with a statistical analysis method to ensure a high detection sensitivity, signal uniformity, and stability. We then used SERS for the early diagnosis of the fouling process and determining when the membrane pores would be blocked. The fouled area was visualized by a combination of the silver staining and Raman mapping. The fouling propensity of different proteins was studied by comparing the relative SERS band intensities of different proteins on a glass slide and after membrane filtration. Compared with fluorescence-based techniques, the narrow, well-resolved Raman band, especially the use of the same excitation line and laser power, endows SERS the ability to compare the fouling propensity in a very simple way.

The Preparation of High-Performance and Stable MXene Nanofiltration Membranes with MXene Embedded in the Organic Phase.

Nanomaterials embedded in nanofiltration membranes have become a promising modification technology to improve separation performance. As a novel representation of two-dimensional (2D) nanomaterials, MXene has nice features with a strong negative charge and excellent hydrophilicity. Our previous research showed that MXene nanosheets were added in the aqueous phase, which enhanced the permeselectivity of the membrane and achieved persistent desalination performance. Embedding the nanomaterials into the polyamide layer through the organic phase can locate the nanomaterials on the upper surface of the polyamide layer, and also prevent the water layer around the hydrophilic nanomaterials from hindering the interfacial polymerization reaction. We supposed that if MXene nanosheets were added in the organic phase, MXene nanosheets would have more negative contact sites on the membrane surface and the crosslinking degree would increase. In this study, MXene were dispersed in the organic phase with the help of ultrasound, then MXene nanocomposite nanofiltration membranes were achieved. The prepared MXene membranes obtained enhanced negative charge and lower effective pore size. In the 28-day persistent desalination test, the Na2SO4 rejection of MXene membrane could reach 98.6%, which showed higher rejection compared with MXene embedded in aqueous phase. The results of a long-time water immersion test showed that MXene membrane could still maintain a high salt rejection after being soaked in water for up to 105 days, which indicated MXene on the membrane surface was stable. Besides MXene membrane showed high rejection for high-concentration brine and good mono/divalent salt separation performance in mono/divalent mixed salt solutions. As a part of the study of MXene in nanofiltration membranes, we hoped this research could provide a theoretical guidance for future research in screening different addition methods and different properties.

Polydopamine-Assisted Two-Dimensional Molybdenum Disulfide (MoS2)-Modified PES Tight Ultrafiltration Mixed-Matrix Membranes: Enhanced Dye Separation Performance.

Tight ultrafiltration (TUF) membranes with high performance have attracted more and more attention in the separation of organic molecules. To improve membrane performance, some methods such as interface polymerization have been applied. However, these approaches have complex operation procedures. In this study, a polydopamine (PDA) modified MoS2 (MoS2@PDA) blending polyethersulfone (PES) membrane with smaller pore size and excellent selectivity was fabricated by a simple phase inversion method. The molecular weight cut-off (MWCO) of as-prepared MoS2@PDA mixed matrix membranes (MMMs) changes, and the effective separation of dye molecules in MoS2@PDA MMMs with different concentrations were obtained. The addition amount of MoS2@PDA increased from 0 to 4.5 wt %, resulting in a series of membranes with the MWCO values of 7402.29, 7007.89, 5803.58, 5589.50, 6632.77, and 6664.55 Da. The MWCO of the membrane M3 (3.0 wt %) was the lowest, the pore size was defined as 2.62 nm, and the pure water flux was 42.0 L m-2 h-1 bar-1. The rejection of Chromotrope 2B (C2B), Reactive Blue 4 (RB4), and Janus Green B (JGB) in aqueous solution with different concentrations of dyes was better than that of unmodified membrane. The separation effect of M3 and M0 on JGB at different pH values was also investigated. The rejection rate of M3 to JGB was higher than M0 at different pH ranges from 3 to 11. The rejection of M3 was 98.17-99.88%. When pH was 11, the rejection of membranes decreased with the extension of separation time. Specifically, at 180 min, the rejection of M0 and M3 dropped to 77.59% and 88.61%, respectively. In addition, the membrane had a very low retention of salt ions, Nacl 1.58%, Na2SO4 10.52%, MgSO4 4.64%, and MgCl2 1.55%, reflecting the potential for separating salts and dyes of MoS2@PDA/PES MMMs.

Distributions of typical contaminant species in urban short-term storm runoff and their fates during rain events: a case of Xiamen City.

The pollutants in urban storm runoff, which lead to an non-point source contamination of water environment around cities, are of great concerns. The distributions of typical contaminants and the variations of their species in short term storm runoff from different land surfaces in Xiamen City were investigated. The concentrations of various contaminants, including organic matter, nutrients (i.e., N and P) and heavy metals, were significantly higher in parking lot and road runoff than those in roof and lawn runoff. The early runoff samples from traffic road and parking lot contained much high total nitrogen (TN 6-19 mg/L) and total phosphorus (TP 1-3 mg/L). A large proportion (around 60%) of TN existed as total dissolved nitrogen (TDN) species in most runoff. The percentage of TDN and the percentage of total dissolved phosphorus remained relatively stable during the rain events and did not decrease as dramatically as TN and TP. In addition, only parking lot and road runoff were contaminated by heavy metals, and both Pb (25-120 microg/L) and Zn (0.1-1.2 mg/L) were major heavy metals contaminating both runoff. Soluble Pb and Zn were predominantly existed as labile complex species (50%-99%), which may be adsorbed onto the surfaces of suspended particles and could be easily released out when pH decreased. This would have the great impact to the environment.

Nano-Fe mediated treatment of real hydraulic fracturing flowback and its practical implication on membrane fouling in tandem anaerobic-oxic membrane bioreactor.

The rising water-use intensity, and lack of cost-effective treatment strategy and reuse of hydraulic fracturing flowback (HFF) has become an increasing cause of concern. The present work evaluates the integration of parallel sets of tandem anaerobic-oxic membrane bioreactor (AMBR) with and without nano-Fe for treatment and reuse of real HFF obtained from Ordos Basin, China. Treatment efficiencies in terms of organic conversions, micro-pollutants degradation, resource recovery, and effects of nano-Fe release on membrane fouling were evaluated. Nano-Fe mediated AMBR (FAMBR) system effectively reduce target micro-pollutants (such as Acenaphthylene) at 94.4 % compared to the parallel AMBR system (17.1 % without nano-Fe). Moreover, recovery of potential economic chemicals like Al and P (1.0 and 0.6 mg/g spent nano-Fe) availed using FAMBR system. However, colonization of FAMBR membrane surface by Fe-protein/peptide hydroxocomplexes initiated by Fe-catalyzed microbial extrusions present a huge fouling challenge relative to the AMBR system. Additional evidences from microscopic/spectroscopic analysis of the FAMBR membrane system revealed that despite having a promising outlook, mediation of nano-Fe with AMBR system might result in a major fouling event during HFF treatment. Engineered design of nano-Fe to reduced leached nano-Fe ions in pre-treatment step prior to AMBR treatment system may be of potential research consideration.

Impacts of Sulfuric Acid on the Stability and Separation Performance of Polymeric PVDF-Based Membranes at Mild and High Concentrations: An Experimental Study.

This study investigated the effects of an aqueous acidic solution at typical concentrations on polymeric polyvinylidene fluoride (PVDF)-based membranes. Flat-sheet PVDF-based membranes were completely embedded in sulfuric acid at varying concentrations. The effect of the acid concentration after a prolonged exposure time on the chemical, mechanical and physical properties of the membrane were checked via FE-SEM, EDX (Energy-Dispersive Spectrometer), FTIR, XRD, tensile strength, zeta potential, contact angle, porosity, pure water flux measurement and visual observation. The result reveals prompt initiation of reaction between the PVDF membrane and sulfuric acid, even at a mild concentration. As the exposure time extends with increasing concentration, the change in chemical and mechanical properties become more pronounced, especially in the morphology, although this was not really noticeable in either the crystalline phase or the functional group analyses. The ultimate mechanical strength decreased from 46.18 ± 0.65 to 32.39 ± 0.22 MPa, while the hydrophilicity was enhanced due to enlargement of the pores. The flux at the highest concentration and exposure period increased by 2.3 times that of the neat membrane, while the BSA (Bovine Serum Albumin) rejection dropped by 55%. Similar to in an alkaline environment, the stability and performance of the PVDF-based membrane analyzed in this study manifested general deterioration.

Scalable Ti3C2Tx MXene Interlayered Forward Osmosis Membranes for Enhanced Water Purification and Organic Solvent Recovery.

The design of nanosheets interlayer between the substrate and polyamide layer has attracted growing attention to improve the performance of thin-film composite membranes. However, the membrane size is limited by current fabrication methods such as vacuum filtration. Herein, a high-performance MXene (Ti3C2Tx) interlayered polyamide forward osmosis (FO) membrane is fabricated based on a combination of a facile and scalable brush-coating of MXene on nylon substrates and the interfacial polymerization process. The as-prepared FO membrane shows high water permeability of 31.8 L m-2 h-1 and low specific salt flux of 0.27 g L-1 using 2.0 mol L-1 sodium chloride as the draw solution. This is attributed to the adjustment of substrate properties and the polyamide layer by coating of MXene as well as the facilitation of water transportation by the interlayer distances between Ti3C2Tx. The membrane also exhibits a good organic solvent forward osmosis performance with high ethanol flux as 9.5 L m-2 h-1 and low specific salt flux of 0.4 g L-1 using 2.0 mol L-1 lithium chloride as the draw solution. Moreover, the MXene interlayered FO membrane demonstrates a feasible application in real seawater desalination and industrial textile wastewater treatment. This work presents an effective approach to fabricating nanomaterials interlayered FO membranes with superior performance for both desalination and organic solvent recovery.