Synthesis of directly fused porphyrin dimers through Fe(OTf)3-mediated oxidative coupling.

An efficient and general Fe(OTf)3-mediated oxidative coupling method was developed for the synthesis of doubly or triply linked porphyrin dimers. Besides the central metal and peripheral substituent, regioselectivity of the oxidative coupling was found to be closely relevant to the onset oxidation potential of the porphyrin substrate, and the reactant with higher E(onset(ox)) tends to generate meso-ß doubly fused porphyrin dimer.

Microwave Remote Sensing with Hybrid Quantum Receiver.

Detecting a microwave signal that is emitted or reflected by distant targets is a powerful tool in fundamental science and industrial technology. Solid-state spins provide an opportunity to realize quantum-enhanced remote sensing under ambient conditions. However, the weak interaction between the free-space signal and atomic size sensor limits the sensitivity. This hinders the realization of practical quantum remote sensing. Here, we demonstrate active microwave remote sensing with a diamond-based hybrid quantum receiver by combining electromagnetic field localization at nanoscale with quantum spin manipulation. A method of differential spin refocusing (DSR) is developed to overcome the challenge of reducing the impact of inhomogeneities in spin-signal interaction, while the strength of interaction is enhanced by more than 3 orders with nanostructure. It improves the coherent interaction time of quantum receiver by 30-fold, substantially enhancing the sensitivity and stability. By detecting the reflected microwave with picotesla sensitivity, diamond remote sensing monitors the real-time status of a centimeter-sized target at 2 m distance. Our method is general to various solid-state spins. The results will expand the applications of solid-state spin quantum sensors in areas ranging from medical imaging to resource survey.

Synthesis and Characterization of Transition Metal Dichalcogenide Nanoribbons Based on a Controllable O2 Etching.

Although the synthesis of monolayer transition metal dichalcogenides has been established in the last decade, synthesizing nanoribbons remains challenging. In this study, we have developed a straightforward method to obtain nanoribbons with controllable widths (25-8000 nm) and lengths (1-50 µm) by O2 etching of the metallic phase in metallic/semiconducting in-plane heterostructures of monolayer MoS2. We also successfully applied this process for synthesizing WS2, MoSe2, and WSe2 nanoribbons. Furthermore, field-effect transistors of the nanoribbons show an on/off ratio of larger than 1000, photoresponses of 1000%, and time responses of 5 s. The nanoribbons were compared with monolayer MoS2, highlighting a substantial difference in the photoluminescence emission and photoresponses. Additionally, the nanoribbons were used as a template to build one-dimensional (1D)-1D or 1D-2D heterostructures with various transition metal dichalcogenides. The process developed in this study offers simple production of nanoribbons with applications in several fields of nanotechnology and chemistry.

Miniaturized Flexible Non-Contact Interface Based on Heat Shrinkage Technology.

High-performance miniaturized flexible sensors are becoming increasingly important in wearable electronics. However, miniaturization of devices often requires high-precision manufacturing processes and equipment, which limits the commercialization of flexible sensors. Therefore, revolutionary technologies for manufacturing miniaturized flexible sensors are highly desired. In this work, a new method for manufacturing miniaturized flexible humidity sensor by utilizing heat shrinkage technology is presented. This method successfully achieves much smaller sensor and denser interdigital electrode. Utilizing this method, a miniaturized flexible humidity sensor and array are presented, fabricated by anchoring nano-Al2 O3 into carbon nano-tube as the humidity sensitive film. This heat shrinkage technology, forming wrinkle structure on the humidity sensitive film, endows the sensor with a high sensitivity over 200% (ΔR/R0 ) at humidity levels ranging from 0 to 90%RH and a fast recovery time (0.5 s). The sensor allows non-contact monitoring human respiration and alerting in case of an asthma attack and the sensor array can be adaptively attached to the wrist as a non-contact human-machine interface to control the mechanical hand or computer. This work provides a general and effective heat shrinkage technology for the development of smaller and more efficient flexible circuits and sensor devices.

A highly adaptive real-time water wave sensing array for marine applications.

The ocean accounts for about 70% of the Earth's surface area. In recent years, there has been increasing research into large-scale power generation device networks for ocean energy and the number of mobile sensing nodes in the ocean is expected to increase with the operation of the Internet of Things (IoT). Since water waves are low-frequency intermittent energy, they are suitable for harvesting and sensing by a triboelectric nanogenerator (TENG) with high conversion efficiency, flexible structural design, and environmental friendliness. Furthermore, TENG-units are suitable for large-scale water waves. We proposed a 6 × 4 cross-vertical double-layer electrode array device to sense and restore the water wave state. The design of this structure can refine the waveform display while reducing the electrode interfaces and achieving efficient and accurate sensing of the water wave. Then we developed a complete display system combined with the device and demonstrated the superior performance of each unit and the whole array both on a curved surface and underwater. It can be expected that the device and the system will have great potential in maritime applications.

Flexible Triboelectric Tactile Sensor Based on a Robust MXene/Leather Film for Human-Machine Interaction.

With the rapid development of Internet of Things (IoT) technology in recent years, self-actuated sensor systems without an external power supply such as flexible triboelectric nanogenerator (TENG)-based strain sensors have received wide attention due to their simple structure and self-powered active sensing properties. However, to satisfy the practical applications of human wearable biointegration, flexible TENGs impose higher requirements for establishing a balance between material flexibility and good electrical properties. In this work, the strength of the MXene/substrate interface was greatly improved by utilizing leather with a unique surface structure as the substrate material, resulting in a mechanically strong and electrically conductive MXene film. Due to the natural fiber structure of the leather surface, the surface of the MXene film with a rough structure was obtained, which improved the electrical output performance of the TENG. The electrode output voltage of MXene film on leather based on single-electrode TENG can reach 199.56 V and the maximum output power density can reach 0.469 mW/cm2. Combined with laser-assisted technology, the efficient array preparation of MXene and graphene was achieved and applied to various human-machine interface (HMI) applications.

Wrinkle Clamp Down on Structure Crack Strain Sensor Based on High Poisson's Ratio Material for Home Health Monitoring and Human-Machine Interaction.

Flexible wearable crack strain sensors are currently receiving significant attention because they can be used in a wide range of physiological signal monitoring and human-machine interaction applications. However, sensors with high sensitivity, great repeatability, and wide sensing range remain challenging. Herein, a tunable wrinkle clamp down structure (WCDS) crack strain sensor based on high Poisson's ratio material with high sensitivity, high stability, and wide strain range is proposed. Based on the high Poisson's ratio of the acrylic acid film, the WCDS was prepared by a prestretching process. The wrinkle structures can clamp down the crack to improve the cyclic stability of the crack strain sensor while maintaining its high sensitivity. Moreover, the tensile properties of the crack strain sensor are improved by introducing wrinkles in the bridge-like gold stripes connecting each separated gold flake. Owing to this structure, the sensitivity of the sensor can reach 3627, stable operation over 10 000 cycles is achieved, and the strain range can reach about 9%. In addition, the sensor exhibits low dynamic response and good frequency characteristics. Because of its demonstrated excellent performance, the strain sensor can be used in pulse wave and heart rate monitoring, as well as posture recognition and game control.

Quantum enhanced radio detection and ranging with solid spins.

The accurate radio frequency (RF) ranging and localizing of objects has benefited the researches including autonomous driving, the Internet of Things, and manufacturing. Quantum receivers have been proposed to detect the radio signal with ability that can outperform conventional measurement. As one of the most promising candidates, solid spin shows superior robustness, high spatial resolution and miniaturization. However, challenges arise from the moderate response to a high frequency RF signal. Here, by exploiting the coherent interaction between quantum sensor and RF field, we demonstrate quantum enhanced radio detection and ranging. The RF magnetic sensitivity is improved by three orders to 21 [Formula: see text], based on nanoscale quantum sensing and RF focusing. Further enhancing the response of spins to the target's position through multi-photon excitation, a ranging accuracy of 16 µm is realized with a GHz RF signal. The results pave the way for exploring quantum enhanced radar and communications with solid spins.

Observation of the photovoltaic effect in a van der Waals heterostructure.

van der Waals (vdW) heterostructures, which can be assembled with various two-dimensional materials, provide a versatile platform for exploring emergent phenomena. Here, we report an observation of the photovoltaic effect in a WS2/MoS2 vdW heterostructure. Light excitation of WS2/MoS2 at a wavelength of 633 nm yields a photocurrent without applying bias voltages, and the excitation power dependence of the photocurrent shows characteristic crossover from a linear to square root dependence. Photocurrent mapping has clearly shown that the observed photovoltaic effect arises from the WS2/MoS2 region, not from Schottky junctions at electrode contacts. Kelvin probe microscopy observations show no slope in the electrostatic potential, excluding the possibility that the photocurrent originates from an unintentionally formed built-in potential.

Quantum imaging of the reconfigurable VO2 synaptic electronics for neuromorphic computing.

Neuromorphic computing has shown remarkable capabilities in silicon-based artificial intelligence, which can be optimized by using Mott materials for functional synaptic connections. However, the research efforts focus on two-terminal artificial synapses and envisioned the networks controlled by silicon-based circuits, which is difficult to develop and integrate. Here, we propose a dynamic network with laser-controlled conducting filaments based on electric field-induced local insulator-metal transition of vanadium dioxide. Quantum sensing is used to realize conductivity-sensitive imaging of conducting filament. We find that the location of filament formation is manipulated by focused laser, which is applicable to simulate the dynamical synaptic connections between the neurons. The ability to process signals with both long-term and short-term potentiation is further demonstrated with ~60 times on/off ratio while switching the pathways. This study opens the door to the development of dynamic network structures depending on easily controlled conduction pathways, mimicking the biological nervous systems.

Flexible alternating current electroluminescent devices integrated with high voltage triboelectric nanogenerators.

Flexible alternating current electroluminescent (ACEL) devices have attracted growing interest as promising wearable displays for their uniformity of light emission, low power consumption, and excellent reliability. However, the requirement of high-voltage power sources for driving ACEL devices greatly impedes their portability and commercialization. Here, we developed flexible ACEL devices integrated with high output-voltage triboelectric nanogenerators (TENG) using easy and low-cost crumpled Al electrodes. The output voltage and current could reach as high as 490 V and 71.74 µA, corresponding to the maximum instantaneous output power density of 1.503 mW cm-2, which was demonstrated to power an integrated flexible ACEL patterned display. In addition, through signal acquisition and transmission, ACEL can display the compression frequency of TENG in real time. Such self-powered ACEL devices are very promising as flexible displays in wearable electronics.

ß-Elemene Enhances the Sensitivity of Osteosarcoma Cells to Doxorubicin via Downregulation of Peroxiredoxin-1.

BACKGROUND: Doxorubicin (Dox) resistance is a primary obstacle for the treatment of osteosarcoma. Meanwhile, ß-Elemene was shown to exhibit an anti-proliferative effect on osteosarcoma cells. However, the role of a combination of Dox with ß-Elemene on osteosarcoma cells remains unclear. Thus, this study aimed to investigate the role of the combination of Dox with ß-Elemene on the proliferation, apoptosis and oxidative stress of Dox-resistance osteosarcoma cells. METHODS: CKC-8, EdU staining and flow cytometry assays were used to determine the viability, proliferation and apoptosis of Dox-resistance osteosarcoma cells, respectively. Meanwhile, the expression of antioxidant protein peroxiredoxin-1 (Prx-1) in Dox-resistance osteosarcoma cells was detected with Western blot assay. RESULTS: In this study, the inhibitory effects of Dox on the viability and proliferation of Dox-resistance osteosarcoma cells were significantly enhanced by ß-Elemene. In addition, the combination of Dox and ß-Elemene markedly induced the apoptosis and oxidative stress in Dox-resistance osteosarcoma cells. Moreover, combination treatment notably downregulated the expression of Prx-1 in Dox-resistance osteosarcoma cells, indicating that combination treatment inhibited the antioxidant capacity of Dox-resistance osteosarcoma cells. In vivo experiments confirmed that ß-Elemene could enhance the anti-tumor effect of Dox in Saos-2/Dox xenograft model. CONCLUSION: We found that ß-Elemene could reverse Dox resistance in Dox-resistance osteosarcoma cells via inhibition of Prx-1. Therefore, combining Dox with ß-Elemene might be considered as a therapeutic approach for the treatment of Dox-resistant osteosarcoma.

lncRNA NORAD promotes the progression of osteosarcoma via targeting of miR-155-5p.

Osteosarcoma (OS) is the most common malignant bone tumor in teens. Non-coding RNA activated by DNA damage (NORAD), a long non-coding RNA (lncRNA), has been reported to be involved in cancer biology, although its role in OS remains largely unknown. In the present study reverse transcription-quantitative PCR (RT-qPCR) was used to determine the expression levels of NORAD and miR-155-5p in samples from patients with OS. OS cell lines (Saos-2 and U2OS) were used as cell models. The biological influence of NORAD on OS cells was studied in vitro using Cell Counting Kit-8 and Transwell assays. The interaction between NORAD and miR-155-5p was clarified by bioinformatics analysis, RT-qPCR, luciferase reporter assay and RNA immunoprecipitation. NORAD was significantly increased in OS samples in comparison with controls, while miR-155-5p was reduced. Knockdown of NORAD and transfection of miR-155-5p mimics markedly inhibited the viability, migration and invasion of OS cells. There was a negative correlation between NORAD and miR-155-5p expression levels in OS samples. Taken together, the results of the present study indicated that the NORAD/miR-155-5p axis played a crucial role in regulating the proliferation, migration and invasion of OS cells. It is hypothesized that NORAD and miR-155-5p may serve as potential novel therapeutic targets for OS management.

A robust fiber-based quantum thermometer coupled with nitrogen-vacancy centers.

The nitrogen-vacancy center in diamond has been broadly applied in quantum sensing since it is sensitive to different physical quantities. Meanwhile, it is difficult to isolate disturbances from unwanted physical quantities in practical applications. Here, we present a fiber-based quantum thermometer by tracking the sharp-dip in the zero-field optically detected magnetic resonance spectrum in a high-density nitrogen-vacancy ensemble. Such a scheme can not only significantly isolate the magnetic field and microwave power drift but also improve the temperature sensitivity. Thanks to its simplicity and compatibility in implementation and robustness, this quantum thermometer is then applied to the surface temperature imaging of an electronic chip with a sensitivity of 18mK/Hz. It thus paves the way to high sensitive temperature measurements in ambiguous environments.

Versatile Post-Doping toward Two-Dimensional Semiconductors.

We have developed a simple and straightforward way to realize controlled postdoping toward 2D transition metal dichalcogenides (TMDs). The key idea is to use low-kinetic-energy dopant beams and a high-flux chalcogen beam simultaneously, leading to substitutional doping with controlled dopant densities. Atomic-resolution transmission electron microscopy has revealed that dopant atoms injected toward TMDs are incorporated substitutionally into the hexagonal framework of TMDs. The electronic properties of doped TMDs (Nb-doped WSe2) have shown drastic change and p-type action with more than 2 orders of magnitude increase in current. Position-selective doping has also been demonstrated by the postdoping toward TMDs with a patterned mask on the surface. The postdoping method developed in this work can be a versatile tool for 2D-based next-generation electronics in the future.

Willow Catkins-Derived Porous Carbon Membrane with Hydrophilic Property for Efficient Solar Steam Generation.

Biomass wastes are abundant and common in our daily life, and they are cost-effective, promising, and renewable. Herein, collected willow catkins were used to prepare a hydrophilic biochar composite membrane, which was placed in a tree-like evaporation configuration to simulate a natural transpiration process. The strong light absorption (∼96%) of the biochar layer could harvest light and convert it into thermal energy, which then is used to heat the surrounding water pumped by a porous water channel via capillary action. A hydrophilic light-absorber layer remarkably increased the attachment sites of water molecules, thereby maximizing the use of thermal energy. At the same time, hierarchically porous structure and large specific surface area (∼1380 m2 g-1) supplied more available channels for rapid water vapor diffusion. The as-prepared composite membrane with a low-cost advantage realized a high evaporation rate (1.65 kg m-2 h-1) only under 1 sun illumination (1 kW m-2), which was improved by roughly 27% in comparison with the unmodified hydrophobic composite membrane. The tree-like evaporation configuration with excellent heat localization resulted in the evaporator achieving a high solar-to-vapor conversion efficiency of ∼90.5%. Besides, the composite membrane could remove 99.9% sodium ions from actual seawater and 99.5% heavy metal ions from simulated wastewater, and the long-term stable evaporation performance proved its potential in actual solar desalination. This work not only fabricated an efficient evaporator but also provided a strategy for reusing various natural wastes for water purification.

Enhanced Stretchable and Sensitive Strain Sensor via Controlled Strain Distribution.

Stretchable and wearable opto-electronics have attracted worldwide attention due to their broad prospects in health monitoring and epidermal applications. Resistive strain sensors, as one of the most typical and important device, have been the subject of great improvements in sensitivity and stretchability. Nevertheless, it is hard to take both sensitivity and stretchability into consideration for practical applications. Herein, we demonstrated a simple strategy to construct a highly sensitive and stretchable graphene-based strain sensor. According to the strain distribution in the simulation result, highly sensitive planar graphene and highly stretchable crumpled graphene (CG) were rationally connected to effectively modulate the sensitivity and stretchability of the device. For the stretching mode, the device showed a gauge factor (GF) of 20.1 with 105% tensile strain. The sensitivity of the device was relatively high in this large working range, and the device could endure a maximum tensile strain of 135% with a GF of 337.8. In addition, in the bending mode, the device could work in outward and inward modes. This work introduced a novel and simple method with which to effectively monitor sensitivity and stretchability at the same time. More importantly, the method could be applied to other material categories to further improve the performance.

Hydrophilic polymer-stabilized porous composite membrane for water evaporation and solar desalination.

Solar steam generation is considered an effective and sustainable method for addressing freshwater shortages. However, several challenges to developing photothermal materials and improving evaporation performance currently exist. Herein, we designed a hydrophilic evaporator with double-layer structure by combining a hydrophilic polymer with three-dimensional porous carbon nanotube beads on a glass microfiber membrane. Poly(methacrylic acid) acted as a binder to stabilize the carbon-based photothermal layer along with continuously pumped water. The assembled carbon nanotube beads with porous structures not only harvested and converted light to heat but also provided available channels for fast vapor diffusion. An artificial tree evaporation configuration can effectively localize heat on the photothermal layer, which endowed the evaporator with a high evaporation rate of 1.62 kg m-2 h-1 with a solar-to-vapor energy conversion efficiency of 87% under 1 sun illumination. Meanwhile, excellent desalination performance and stable recycling test made the evaporator have great potential in practical applications.

An NNN-Pincer-Cobalt Complex Catalyzed Highly Markovnikov-Selective Alkyne Hydrosilylation.

A new NNN pincer (amine-pyridine-imine, API) cobalt complex, which is bench-stable and is applicable for the highly efficient and regioselective hydrosilylation of terminal alkynes, is developed. A broad set of α-vinylsilanes was successfully synthesized in good to high yields with up to 98/2 Markovnikov regioselectivity. This protocol can be readily scaled up for gram-scale synthesis and demonstrates the most efficient cobalt-catalyzed hydrosilylation of alkynes with turnover frequencies as high as 126 720 h-1 to date.

Selective Semihydrogenation of Alkynes Catalyzed by Pd Nanoparticles Immobilized on Heteroatom-Doped Hierarchical Porous Carbon Derived from Bamboo Shoots.

Highly dispersed palladium nanoparticles (Pd NPs) immobilized on heteroatom-doped hierarchical porous carbon supports (N,O-carbon) with large specific surface areas are synthesized by a wet chemical reduction method. The N,O-carbon derived from naturally abundant bamboo shoots is fabricated by a tandem hydrothermal-carbonization process without assistance of any templates, chemical activation reagents, or exogenous N or O sources in a simple and ecofriendly manner. The prepared Pd/N,O-carbon catalyst shows extremely high activity and excellent chemoselectivity for semihydrogenation of a broad range of alkynes to versatile and valuable alkenes under ambient conditions. The catalyst can be readily recovered for successive reuse with negligible loss in activity and selectivity, and is also applicable for practical gram-scale reactions.