Directional Electrosynthesis of Adipic Acid and Cyclohexanone by Controlling the Active Sites on NiOOH.

Dicarboxylic acids and cyclic ketones, such as adipic acid (AA) and cyclohexanone (CHN), are essential compounds for the chemical industry. Although their production by electrosynthesis using electricity is considered one of the most promising strategies, the application of such processes has been hampered by a lack of efficient catalysts as well as a lack of understanding of the mechanism. Herein, a series of monolithic msig/ea-NiOOH-Ni(OH)2/NF were prepared by means of self-dissolution of metal matrix components, interface growth, and electrochemical activation (denoted as msig/ea). The as-synthesized catalysts have three-dimensional cuboid-like structures formed by interconnecting nanosheets composed of NiOOH. By theoretically guided regulation of the amounts of Ni3+ and oxygen vacancies (OV), a 96.5% yield of CHN from cyclohexanol (CHA) dehydrogenation and a 93.6% yield of AA from CHN oxidation were achieved. A combined experimental and theoretical study demonstrates that CHA dehydrogenation and CHN oxidation were promoted by the formation of Ni3+ and the peroxide species (*OOH) on OV. This work provides a promising approach for directional electrosynthesis of high-purity chemicals with in-depth mechanistic insights.

JAK/STAT in leukemia: a clinical update.

Over the past three decades, considerable efforts have been expended on understanding the Janus kinase/signal transducer and activator of transcription (JAK/STAT) signaling pathway in leukemia, following the identification of the JAK2V617F mutation in myeloproliferative neoplasms (MPNs). The aim of this review is to summarize the latest progress in our understanding of the involvement of the JAK/STAT signaling pathway in the development of leukemia. We also attempt to provide insights into the current use of JAK/STAT inhibitors in leukemia therapy and explore pertinent clinical trials in this field.

Magnetic superhydrophobic cellulose nanofibril based aerogel with rope-ladder like structure incorporating both superelasticity and excellent oil absorption.

Achieving an equilibrium between exceptional oil absorption and remarkable elasticity has emerged as a formidable challenge for magnetic porous materials designed for oil absorption. Here, we propose an original, magnetic and superhydrophobic cellulose nanofibril (CNF) based aerogel system with a rope-ladder like skeleton by to greatly improve the issue. Within this system, CNF as the skeleton was combined with multiwalled carbon nanotubes (MWCNT)@Fe3O4 as the magnetic and enhanced component, both methyltrimethoxysilane (MTMS) and acetonitrile-extracted lignin (AEL) as the soft-hard associating constituents. The resultant CNF based aerogel shows a rope-ladder like pore structure to contribute to high elasticity and excellent oil absorption (28.34-61.09 g/g for various oils and organic solvents) under the synergistic effect of Fe3O4@MWCNT, AEL and MTMS, as well as good specific surface area (27.97 m2/g), low density (26.4 mg/cm3). Notably, despite the introduced considerable proportion (0.5 times of mass-CNF) of Fe3O4@MWCNT, the aerogel retained an impressive compression-decompression rate (88%) and the oil absorption efficiency of above 87% for various oils due to the soft-hard associating structure supported by both MTMS and AEL. This study provides a prospective strategy to balance between high elasticity and excellent oil absorption of CNF based aerogel doping inorganic particles.

A Novel Prognostic Score Based on Multiple Quantitative Parameters of Chest CT for Patients with Synchronous Multiple Primary Lung Cancer: Is Solid Component Size a Better Prognostic Indicator?

BACKGROUND: There is no simple and definitive way to predict the prognosis of synchronous multiple primary lung cancer (SMPLC). In this study, we developed a clinical prognostic score for predicting the survival of patients with SMPLC. PATIENTS AND METHODS: This study included 206 patients with SMPLC between 2011 and 2020 at three hospitals. Kaplan-Meier analysis was used to determine the optimal cutoff values for the quantitative chest computed tomography (CT) parameters. Multivariable Cox proportional hazards regression was carried out to identify independent prognostic factors for predicting overall survival (OS) and disease-free survival (DFS). The time-dependent receiver operating characteristic curve was analyzed to evaluate the prognostic performance. RESULTS: A CT-based prognostic score (CTPS) comprising six chest CT parameters was developed. Compared with T stage, CTPS had a higher prediction accuracy for OS and DFS. All C-indices of the model reached a satisfactory level in both the development and validation cohorts. Significant differences in the OS and DFS curves were observed when the patients were stratified into different risk groups. The high-risk group (CTPS of 5-6) had poorer survival than the low-risk group (CTPS of 0-4). CONCLUSIONS: The developed CTPS and the corresponding risk stratification system are valid for predicting the survival of patients with SMPLC.

Promoting Amination of Furfural to Furfurylamine by Metal-Support Interactions on Pd/MoO3-x Catalysts.

The reductive amination of carbonyl compounds is one of the most straightforward protocols to construct C-N bonds, but highly desires active and selective catalysts. Herein, Pd/MoO3-x catalysts are proposed for furfural amination, in which the interactions between Pd nanoparticles and MoO3-x supports can be easily ameliorated by varying the preparation temperature toward efficient catalytic turnover. Thanks to the synergistic cooperation of MoV -rich MoO3-x and highly dispersed Pd, the optimal catalysts afford the high yield of furfurylamine (84 %) at 80 °C. Thereinto, MoV species not only acts as the acidic promoter to facilitate the activation of carbonyl groups, but also interacts with Pd nanoparticles to promote the subsequent hydrogenolysis of Schiff base N-furfurylidenefurfurylamine and its germinal diamine. The good efficiency of Pd/MoO3-x within a broad substrate scope further highlights the key contribution of metal-support interactions to the refinery of biomass feedstocks.

Does dual-layer spectral detector CT provide added value in predicting spread through air spaces in lung adenocarcinoma? A preliminary study.

OBJECTIVES: To examine the predictive value of dual-layer spectral detector CT (DLCT) for spread through air spaces (STAS) in clinical lung adenocarcinoma. METHODS: A total of 225 lung adenocarcinoma cases were retrospectively reviewed for demographic, clinical, pathological, traditional CT, and spectral parameters. Multivariable logistic regression analysis was carried out based on three logistic models, including a model using traditional CT features (traditional model), a model using spectral parameters (spectral model), and an integrated model combining traditional CT and spectral parameters (integrated model). Receiver operating characteristic (ROC) curve analysis and decision curve analysis (DCA) were performed to assess these models. RESULTS: Univariable analysis showed significant differences between the STAS and non-STAS groups in traditional CT features, including nodule density (p < 0.001), pleural indentation types (p = 0.006), air-bronchogram sign (p = 0.031), the presence of spiculation (p < 0.001), long-axis diameter of the entire nodule (LD) (p < 0.001), and consolidation/tumor ratio (CTR) (p < 0.001). Multivariable analysis revealed that LD > 20 mm (odds ratio [OR] = 2.271, p = 0.025) and CTR (OR = 24.208, p < 0.001) were independent predictors in the traditional model, while electronic density (ED) in the venous phase was an independent predictor in the spectral (OR = 1.062, p < 0.001) and integrated (OR = 1.055, p < 0.001) models. The area under the curve (AUC) for the integrated model (0.84) was the highest (spectral model, 0.83; traditional model, 0.80), and the difference between the integrated and traditional models was statistically significant (p = 0.015). DCA showed that the integrated model had superior clinical value versus the traditional model. CONCLUSIONS: DLCT has added value for STAS prediction in lung adenocarcinoma. CLINICAL RELEVANCE STATEMENT: Spectral CT has added value for spread through air spaces prediction in lung adenocarcinoma so may impact treatment planning in the future. KEY POINTS: • Electronic density may be a potential spectral index for predicting spread through air spaces in lung adenocarcinoma. • A combination of spectral and traditional CT features enhances the performance of traditional CT for predicting spread through air spaces.

Prognostic impact of deep learning-based quantification in clinical stage 0-I lung adenocarcinoma.

OBJECTIVES: To evaluate the performance of automatic deep learning (DL) algorithm for size, mass, and volume measurements in predicting prognosis of lung adenocarcinoma (LUAD) and compared with manual measurements. METHODS: A total of 542 patients with clinical stage 0-I peripheral LUAD and with preoperative CT data of 1-mm slice thickness were included. Maximal solid size on axial image (MSSA) was evaluated by two chest radiologists. MSSA, volume of solid component (SV), and mass of solid component (SM) were evaluated by DL. Consolidation-to-tumor ratios (CTRs) were calculated. For ground glass nodules (GGNs), solid parts were extracted with different density level thresholds. The prognosis prediction efficacy of DL was compared with that of manual measurements. Multivariate Cox proportional hazards model was used to find independent risk factors. RESULTS: The prognosis prediction efficacy of T-staging (TS) measured by radiologists was inferior to that of DL. For GGNs, MSSA-based CTR measured by radiologists (RMSSA%) could not stratify RFS and OS risk, whereas measured by DL using 0HU (2D-AIMSSA0HU%) could by using different cutoffs. SM and SV measured by DL using 0 HU (AISM0HU% and AISV0HU%) could effectively stratify the survival risk regardless of different cutoffs and were superior to 2D-AIMSSA0HU%. AISM0HU% and AISV0HU% were independent risk factors. CONCLUSION: DL algorithm can replace human for more accurate T-staging of LUAD. For GGNs, 2D-AIMSSA0HU% could predict prognosis rather than RMSSA%. The prediction efficacy of AISM0HU% and AISV0HU% was more accurate than of 2D-AIMSSA0HU% and both were independent risk factors. CLINICAL RELEVANCE STATEMENT: Deep learning algorithm could replace human for size measurements and could better stratify prognosis than manual measurements in patients with lung adenocarcinoma. KEY POINTS: • Deep learning (DL) algorithm could replace human for size measurements and could better stratify prognosis than manual measurements in patients with lung adenocarcinoma (LUAD). • For GGNs, maximal solid size on axial image (MSSA)-based consolidation-to-tumor ratio (CTR) measured by DL using 0 HU could stratify survival risk than that measured by radiologists. • The prediction efficacy of mass- and volume-based CTRs measured by DL using 0 HU was more accurate than of MSSA-based CTR and both were independent risk factors.

Simultaneous identification of strong and weak interactions with Pauli energy, Pauli potential, Pauli force, and Pauli charge.

Strong and weak interatomic interactions in chemical and biological systems are ubiquitous, yet how to identify them on a unified theoretical foundation is still not well established. Recently, we proposed employing Pauli energy-based indexes, such as strong covalent interaction and bonding and noncovalent interaction indexes, in the framework of density functional theory for the purpose. In this work, we extend our previous theoretical work by directly employing Pauli energy, Pauli potential, Pauli force, and Pauli charge to simultaneously identify both strong covalent bonding and weak noncovalent interactions. Our results from this work elucidate that using their signature isosurfaces, we can identify different types of interactions, either strong or weak, including single, double, triple, and quadruple covalent bonds, ionic bond, metallic bond, hydrogen bonding, and van der Waals interaction. We also discovered strong linear correlations between Pauli energy derived quantities and different covalent bond orders. These qualitative and quantitative results from our present study solidify the viewpoint that a unified approach to simultaneously identify both strong and weak interactions is possible. In our view, this work signifies one step forward towards the goal of establishing a density-based theory of chemical reactivity in density functional theory.

Soluble metal ions migration and distribution in sludge electro-dewatering.

In this study, the effects of electro-dewatering technology applied to high-salt industrial sludge dewatering performance were investigated, in terms of ions migrations and distributions by model simulation and layered tests. The simulation results of Na+ and K+ migrations were consistent with layered experiments during electro-dewatering, where Na+ ions migrated faster than K+ ions. More than 80% Na+ ions were removed by electromigration, which would be useful in subsequent sludge utilization. The mass specific energy consumption was reduced from 350.08 to 295.88 kWh per ton sludge by means of piecewise voltage electro-dewatering method. This study provided insights into the soluble ions migration and distribution mechanism in electro-dewatering process, and a method to improve commercial application performance of high-salt industrial sludge electro-dewatering.

Molybdenum Carbide-Oxide Heterostructures: In Situ Surface Reconfiguration toward Efficient Electrocatalytic Hydrogen Evolution.

Heterostructured Mo2 C-MoOx on carbon cloth (Mo2 C-MoOx /CC), as a model of easily oxidized electrocatalysts under ambient conditions, is investigated to uncover surface reconfiguration during the hydrogen evolution reaction (HER). Raman spectroscopy combined with electrochemical tests demonstrates that the MoVI oxides on the surface are in situ reduced to MoIV , accomplishing promoted HER in acidic condition. As indicated by density functional theoretical calculations, the in situ reduced surface with terminal Mo=O moieties can effectively bring the negative ΔGH* on bare Mo2 C close to a thermodynamic neutral value, addressing difficult H* desorption toward fast HER kinetics. The optimized Mo2 C-MoOx /CC only requires a low overpotential (η10 ) of 60 mV at -10 mA cm-2 in 1.0 m HClO4 , outperforming Mo2 C/CC and most non-precious electrocatalysts. In situ surface reconfiguration are shown on W2 C-WOx , highlighting the significance to boost various metal-carbides and to identify active sites.

Improvement and transcriptome analysis of root architecture by overexpression of Fraxinus pennsylvanica DREB2A transcription factor in Robinia pseudoacacia L. 'Idaho'.

Transcription factors play a key role to enable plants to cope with abiotic stresses. DREB2 regulates the expression of several stress-inducible genes and constitutes major hubs in the water stress signalling webs. We cloned and characterized a novel gene encoding the FpDREB2A transcription factor from Fraxinus pennsylvanica, and a yeast activity assay confirmed its DRE binding and transcription activation. Overexpression of FpDREB2A in R. pseudoacacia showed enhanced resistance to drought stress. The transgenic plant survival rate was significantly higher than that of WT in soil drying and re-watering treatments. Transgenic lines showed a dramatic change in root architecture, and horizontal and vertical roots were found in transgenic plants compared to WT. The vertical roots penetrated in the field soil to more than 60 cm deep, while horizontal roots expanded within the top 20-30 cm of the soil. A physiological test demonstrated that chlorophyll contents were more gradually reduced and that soluble sugars and proline levels elevated more sharply but malondialdehyde level stayed the same (P < 0.05). Plant hormone levels of abscisic acid and IAA were higher than that of WT, while gibberellins and zeatin riboside were found to be lower. The root transcriptomes were sequenced and annotated into 2011 differential expression genes (DEGs). The DEGs were categorized in 149 pathways and were found to be involved in plant hormone signalling, transcription factors, stimulus responses, phenylalanine, carbohydrate and other metabolic pathways. The modified pathways in plant hormone signalling are thought to be the main cause of greater horizontal and vertical root development, in particular.

Comprehensive bioinformatics analysis and cell line experiments revealed the important role of CDCA3 in sarcoma.

Background: Sarcoma mainly originate from bone and soft tissue and are highly aggressive malignant tumors. Cell division cycle-related protein 3 (CDCA3) is a protein involved in the regulation of the cell cycle, which is highly expressed in a variety of malignant tumors. However, its role in sarcoma remains unclear. This study aims to investigate the function and potential mechanism of CDCA3 in sarcoma and to elucidate its importance in sarcoma. Methods: We first studied the expression and prognosis of CDCA family members in sarcoma by Oncomine and the Gene Expression Profiling Interactive Analysis (GEPIA). The role of CDCA3 protein in sarcoma was further analyzed by the Cancer Genome Atlas Program (TCGA), the Cancer Cell Lineage Encyclopedia (CCLE), and Linke-dOmics. In addition, immunohistochemistry and Western blot were used to verify the expression of CDCA3 protein in clinical samples as well as sarcoma cell lines (U2OS, SAOS2, MG63, and HOS). Subsequently, in vitro experiments (cloning and scratching experiments) were performed using sh-NC as well as sh-CDCA3 group cells to reveal the biological functions of CDCA3. Results: We found that the CDCA family (CDCA3, CDCA4, and CDCA8) is highly expressed in sarcoma, and the expression level of CDCA3, CDCA4, and CDCA8 negatively correlates with the prognosis of sarcoma patients. CDCA3 mRNA was highly expressed in pan-cancer by CCLE and TCGA database analysis. KEGG analysis showed that CDCA3 was mainly enriched in the cell cycle signaling pathway (It promoted the transition of the cell cycle from the G0/G1 phase to the S phase). In the level of immune infiltration, CDCA3 was negatively correlated with pDC cells, CD8+T cells, and cytotoxic cells. Finally, patients with high CDCA3 expression in sarcoma were analyzed for resistance to NU7441 and others, while sensitive to Fulvestrant and Dihydrorotenone. Furthermore, we demonstrated high expression of CDCA3 protein in sarcoma tissues and cell lines by immunohistochemistry and Western blot experiments. Cloning, EDU, scratching, and migration experiments showed that the knockdown of CDCA3 inhibited the Proliferation and progression of sarcoma cells. Conclusion: These results suggest for the first time that knockdown of CDCA3 may inhibit sarcoma progression. CDCA3 may be an effective target for the treatment of sarcoma.

Cr-doping promoted surface reconstruction of Ni3N electrocatalysts toward efficient overall water splitting.

Understanding and utilizing the dynamic changes of electrocatalysts under working conditions are important for advancing the sustainable hydrogen production. Here, we for the first time report that Cr-doping can promote the in situ reconstruction of a self-supported Ni3N electrocatalyst (Cr-Ni3N/NF) during oxygen and hydrogen evolution reactions (OER and HER), and therefore improve the electrocatalytic water splitting performance. As identified by in situ measurements and theoretical calculations, Cr-doping enhances OH- adsorption during OER at anode and thereby boosts the transformation of Ni3N pre-catalysts to defect-rich nickel oxyhydroxide (NiOOH) active species. Meanwhile, it facilitates the generation of Ni3N/Ni(OH)2 at cathodes due to effective H2O activation, leading to the fast HER kinetics on the Ni3N/Ni(OH)2 interfaces. Notably, the optimal Cr-Ni3N/NF displays good OER and HER performance in 1.0 M KOH electrolytes, with low overpotentials of 316 and 188 mV to achieve the current density of ± 100 mA cm-2, respectively. Benefiting from its bi-functionality and self-supporting property, an alkaline electrolyzer equipped with Cr-Ni3N/NF as both anode and cathode affords a small voltage of 1.72 V at 100 mA cm-2, along with 100 h operation stability. Elucidating that Cr-doping can boost in situ reconfiguration and consequently the electrocatalytic activity, this work would shed new light on the rational design and synthesis of electrocatalysts via directional reconstructions.

Enhancing Benzylamine Electro-oxidation and Hydrogen Evolution through in-situ Electrochemical Activation of CoC2O4 Nanoarray.

The sluggish anodic oxygen evolution reaction (OER) seriously restricts the overall efficiency of water splitting. Here, we present an environmentally friendly and efficient aniline oxidation (BOR) to replace the sluggish OER, accomplishing the co-production of H2 and high value-added benzonitrile (BN) at low voltages. Cobalt oxalates grown on cobalt foam (CoC2O4·2H2O/CF) are adopted as the pre-catalysts, which further evolve into working electrocatalysts active for BOR and HER after appropriate electrochemical activation. Thereinto, cyclic voltammetry activation at positive potentials is performed to reconstruct cobalt oxalate via extensive oxidation, resulting in enriched Co(III) species and nanoporous structures beneficial for BOR, while chronoamperometry at negative potentials is introduced for the cathodic activation toward efficient HER with obvious improvement. The two activated electrodes can be combined into a two-electrode system, which achieves a high current density of 75 mA cm-2 at the voltage of 1.95 V, with the high Faraday efficiencies of both BOR (90.0%) and HER (90.0%) and the satisfactory yield of BN (76.8%).

The Prognostic Significance of Pontine-White Matter Score in Primary Central Nervous System Lymphoma Patients.

BACKGROUND: Limited data exist on the significance of PET imaging and quantitative PET parameters in primary central nervous system (CNS) lymphoma due to its relative rarity. This study was conducted to investigate the prognostic value of a novel internal standardization indicator, the pontine-white matter (PW) score, in primary CNS lymphoma patients undergoing post-treatment 18F-FDG PET/CT and PET/MR imaging. METHODS: From January 2014 to December 2022, eligible patients with primary CNS lymphoma who underwent post-treatment PET imaging were enrolled. Using the FDG uptake of the pons and white matter as an internal reference, the PW score was graded based on the metabolism of the post-therapeutic lesion for each patient, and its associations with patients' prognosis were investigated. RESULTS: In total, 41 patients with post-treatment PET/CT and 49 patients with post-treatment PET/MR imaging were enrolled. ROC curve analysis indicated that the PW score possessed robust discriminative ability in distinguishing patients with worse outcomes. Furthermore, a higher PW score was significantly correlated with and identified as an independent prognostic indicator for, worse prognosis in both the PET/CT and PET/MR cohorts. CONCLUSION: The study demonstrated that the PW score was an effective prognostic indicator for identifying post-treatment primary CNS lymphoma patients with worse outcomes.

Synergistic enhancement of electrocatalytic nitroarene hydrogenation over Mo2C@MoS2 heteronanorods with dual active-sites.

Electrocatalytic hydrogenation (ECH) enables the sustainable production of chemicals under ambient conditions, in which catalysts catering for the different chemisorption of reactants/intermediates are desired but still challenging. Here, Mo2C@MoS2 heteronanorods with dual active-sites are developed to accomplish efficient nitroarene ECH according to our theoretical prediction that the binding of atomic H and nitro substrates would be synergistically strengthened on Mo2C-MoS2 interfaces. They afford high faradaic efficiency (>85%), yield (>78%) and selectivity (>99%) for the reduction of 4-nitrostyrene (4-NS) to 4-vinylaniline (4-VA) in neutral electrolytes, outperforming not only the single-component counterparts of Mo2C nanorods and MoS2 nanosheets, but also recently reported noble-metals. Accordingly, in situ Raman spectroscopy combined with electrochemical tests clarifies the rapid ECH of 4-NS on Mo2C-MoS2 interfaces due to the facilitated elementary steps, quickly refreshing active sites for continuous electrocatalysis. Mo2C@MoS2 further confirms efficient and selective ECH toward functional anilines with other well-retained reducible groups in wide substrate scope, underscoring the promise of dual-site engineering for exploring catalysts.

Restructuring multi-phase interfaces from Cu-based metal-organic frameworks for selective electroreduction of CO2 to C2H4.

Multi-phase interfaces are promising for surmounting the energy barriers of electrochemical CO2 reduction involving multiple electron transfer steps, but challenges still remain in constructing interfacial micro-structures and unraveling their dynamic changes and working mechanism. Herein, highly active Ag/Cu/Cu2O heterostructures are in situ electrochemically restructured from Ag-incorporating HKUST-1, a Cu-based metal-organic framework (MOF), and accomplish efficient CO2-to-C2H4 conversion with a high faradaic efficiency (57.2% at -1.3 V vs. RHE) and satisfactory stability in flow cells, performing among the best of recently reported MOFs and their derivatives. The combination of in/ex situ characterizations and theoretical calculations reveals that Ag plays a crucial role in stabilizing Cu(i) and increasing the CO surface coverage, while the active Cu/Cu2O interfaces significantly reduce the energy barrier of C-C coupling toward the boosted ethylene production. This work not only proves MOFs as feasible precursors to derive efficient electrocatalysts on site, but also provides in-depth understanding on the working interfaces at an atomic level.

Influence of bio-coupling agent on interfacial interlocking compatibility and toughness of ultrafine bamboo charcoal/polylactic acid composite film.

Applications for polylactic acid (PLA) are significantly impacted by its poor mechanical properties and lack of thermal stability. The goal of this work is to bridge the gap of poor compatibility among the components and enhance their interface interlocking capability to improve the toughness and thermal stability. Ultrafine bamboo charcoal (UFBC) was treated through deep eutectic solvent (DES) method to deposit sodium lignosulfonate (LS) on its surface. LS was used with PLA as a bio-coupling agent to create an eco-friendly PLA composite film with a wide range of characteristics. Benefiting from the penetration of PLA to the internal pores in UFBC, the resultant L-UFBC/PLA film has a good mechanical interlocking structure. Ls can increase the compatibility and strengthen the interface interlocking capability through DES method, which greatly improves the mechanical properties of the system. In comparison to pure PLA one, the elongation at break was 136.24 % greater, and the crystallinity (Xc) increased from 1.09 % to 3.33 %. Furthermore, the thermal stability of the system was also improved, and the residual at 600 °C rose by 4.83 %. These characteristics offer the prepared L-UFBC/PLA film a wide range of potential applications in the packaging, medical, agricultural, and other sectors.