RESUMEN
Owing to the rapid increase in anthropogenic emission of carbon dioxide (CO2) in the atmosphere, which has resulted in a number of global climate challenges, a decrease in CO2 emissions is urgently needed in the current scenario. This study focuses on the development and characterization of composites for carbon dioxide (CO2) separation. The composites consist of two task-specific ionic liquids (TSILs), namely, tetramethylgunidinium imidazole [TMGHIM] and tetramethylgunidinium phenol [TMGHPhO], impregnated in ZIF-8. The performance of CO2 separation, including sorption capacity and selectivity, was evaluated for pristine ZIF-8 and composites of TMGHIM@ZIF-8 and TMGHPhO@ZIF-8. To demonstrate the thermal stability of the material, thermogravimetric analysis (TGA) was performed. Additionally, powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) were utilized to showcase the crystal structures and morphology. Fourier transform infrared spectroscopy (FTIR) and BET were also utilized to confirm the successful incorporation of TSILs into ZIF-8. The composite synthesized with TMGHIM@ZIF-8 demonstrated superior CO2 sorption performance as compared with TMGHPhO@ZIF-8. This is attributed to its strong attraction toward CO2, resulting in a higher CO2/CH4 selectivity of 110 while pristine MOFs showed 12 that is 9 times higher than that of the pristine ZIF-8. These TSILs@ZIF-8 composites have significant potential in designing sorbent materials for efficient acid gas separation applications.
RESUMEN
Aromatic monomers obtained by selective depolymerization of the lignin ß-O-4 motif are typically phenolic and contain (oxygenated) alkyl substitutions. This work reveals the potential of a one-pot catalytic lignin ß-O-4 depolymerization cascade strategy that yields a uniform set of methoxylated aromatics without alkyl side-chains. This cascade consists of selective acceptorless dehydrogenation of the γ-hydroxy group, subsequent retro-aldol reaction cleaving the Cα-Cß bond followed by in situ acceptorless decarbonylation of the formed aldehydes. This three-step cascade reaction, catalyzed by an iridium(I)-BINAP complex, resulted in 75% 1,2-dimethoxybenzene from G-type lignin dimers alongside syngas (CO:H2 ≈ 1.4:1). Applying this method to a synthetic G-type polymer, 11 wt% 1,2-dimethoxybenzene was obtained. This versatile compound can be easily transformed into 3,4-dimethoxyphenol, a valuable precursor for pharmaceutical synthesis, through enzymatic catalytic approach. Moreover, the hydrodeoxygenation potential of 1,2-dimethoxybenzene offers a pathway to produce valuable cyclohexane or benzene derivatives, presenting enticing opportunities for sustainable chemical transformations without the necessity for phenolic mixture upgrading via dealkylation.
RESUMEN
The halide anions present in the electrolyte improve the Faradaic efficiencies (FEs) of the multi-hydrocarbon (C2+ ) products for the electrochemical reduction of CO2 over copper (Cu) catalysts. However, the mechanism behind the increased yield of C2+ products with the addition of halide anions remains indistinct. In this study, we analysed the mechanism by investigating the electronic structures and computing the relative free energies of intermediates formed from CO2 to C2 H4 on the Cu (100) facet based on density functional theory (DFT) calculations. The results show that formyl *CHO from the hydrogenation reaction of the adsorbed *CO acts as the key intermediate, and the C-C coupling reaction occurs preferentially between *CHO and *CO with the formation of a *CHO-CO intermediate. We then propose a free-energy pathway of C2 H4 formation. We find that the presence of halide anions significantly decreases the free energy of the *CHOCH intermediate, and enhances desorption of C2 H4 in the order of I- >Cl- >Br- >F- . Lastly, the obtained results are rationalized through Bader charge analysis.
RESUMEN
Toluene is a prevalent pollutant in indoor environments and its removal is essential to maintain a healthy environment. Adsorption is one of the best alternatives for organic vapours removal, specially at low indoor concentrations. Metal Organic Frameworks (MOFs) and Ionic Liquids (ILs) are potential materials for this mean. In this work, the synthesis and application of IL/MOF composite materials for toluene removal is reported. Loading [BMIM][CH3COO] ionic liquid into MIL101 porous structure improves parent materials affinity towards toluene capture by two orders of magnitude (as Henry's constants, attesting to their synergy). MIL101(Cr) and absorption in [BMIM][CH3COO] IL is best described by Henry's Law, while the Langmuir adsorption model predicts toluene adsorption on [BMIM][CH3COO]/MIL101(Cr) better than Freundlich and Toth equations. Diffusional and kinetics models revealed that toluene diffusion is the rate limiting step for pristine MIL101. Kinetic and diffusion rates were systematically improved upon the incorporation of the ionic liquid due to shorter toluene hops with the adsorbed IL and the increased hydrophobicity in the composites making the sorption more favourable. This study provides a systematic analysis and modelling of the toluene capture process in IL/MOF composites aiding a better understanding of the sorption process in these novel materials.
Asunto(s)
Contaminantes Ambientales , Líquidos Iónicos , Estructuras Metalorgánicas , Tolueno/química , Líquidos Iónicos/química , GasesRESUMEN
OBJECTIVE: Particulate matter with an aerodynamic diameter ≤2.5 µm (PM2.5) is a public health risk. We investigate PM2.5 on metabolites in cardiomyocytes and the influence of vitamin C on PM2.5 toxicity. MATERIALS AND METHODS: For 24 hours, H9C2 were exposed to various concentrations of PM2.5 (0, 100, 200, 400, 800 µg/ml), after which the levels of reactive oxygen species (ROS) and cell viability were measured using the cell counting kit-8 (CCK-8) and 2',7'-dichlorofluoresceindiacetate (DCFH2-DA), respectively. H9C2 were treated with PM2.5 (200 µg/ml) in the presence or absence of vitamin C (40 µmol/L). mRNA levels of interleukin 6(IL-6), caspase-3, fatty acid-binding protein 3 (FABP3), and hemeoxygenase-1 (HO-1) were investigated by quantitative reverse-transcription polymerase chain reaction. Non-targeted metabolomics by LC-MS/MS was applied to evaluate the metabolic profile in the cell. RESULTS: Results revealed a concentration-dependent reduction in cell viability, death, ROS, and increased expression of caspase-3, FABP3, and IL-6. In total, 15 metabolites exhibited significant differential expression (FC > 2, p < 0.05) between the control and PM2.5 group. In the PM2.5 group, lysophosphatidylcholines (LysoPC,3/3) were upregulated, whereas amino acids (5/5), amino acid analogues (3/3), and other acids and derivatives (4/4) were downregulated. PM2.5 toxicity was lessened by vitamin C. It reduced PM2.5-induced elevation of LysoPC (16:0), LysoPC (16:1), and LysoPC (18:1). DISCUSSION AND CONCLUSIONS: PM2.5 induces metabolic disorders in H9C2 cardiomyocytes that can be ameliorated by treatment with vitamin C.
RESUMEN
The separation of dimethyl carbonate (DMC) and methanol is of great significance in industry. In this study, ionic liquids (ILs) were employed as extractants for the efficient separation of methanol from DMC. Using the COSMO-RS model, the extraction performance of ILs consisting of 22 anions and 15 cations was calculated, and the results showed that the extraction performance of ILs with hydroxylamine as the cation was much better. The extraction mechanism of these functionalized ILs was analyzed by molecular interaction and the σ-profile method. The results showed that the hydrogen bonding energy dominated the interaction force between the IL and methanol, and the molecular interaction between the IL and DMC was mainly Van der Waals force. The molecular interaction changes with the type of anion and cation, which in turn affects the extraction performance of ILs. Five hydroxyl ammonium ILs were screened and synthesized for extraction experiments to verify the reliability of the COSMO-RS model. The results showed that the order of selectivity of ILs predicted by the COSMO-RS model was consistent with the experimental results, and ethanolamine acetate ([MEA][Ac]) had the best extraction performance. After four regeneration and reuse cycles, the extraction performance of [MEA][Ac] was not notably reduced, and it is expected to have industrial applications in the separation of methanol and DMC.
RESUMEN
Liquid-liquid extraction (LLE) is an important technique to separate aromatics from aliphatics since these compounds have very similar boiling points and cannot be separated by distillation. Ionic liquids (ILs) are considered as potential extractants to extract aromatics from aliphatics. In this paper, molecular dynamics (MD) simulations were used to predict the extraction property (i.e., capacity and selectivity) of ILs for the LLE of aromatics from aliphatics. The extraction properties of seven different ILs including [C2mim][Tf2N], [C2mim][TFO], [C2mim][SCN], [C2mim][DCA], [C2mim][TCM], [C4mim][Tf2N], and [C8mim][Tf2N] were investigated. Results show that ILs with shorter alkyl chain cations and [Tf2N]- anion exhibit better extraction efficiency than other ILs, which is in agreement with previously reported experimental data on the extraction of toluene from aliphatics and further validated the reliability of the proposed model. The binding energies between ILs and organic molecules were calculated by the density functional theory, which help explain the different extraction behaviors of different ILs. The symmetry-adapted perturbation theory analysis was performed to further understand the interaction mechanisms between ILs and organics. Our study shows that the [Tf2N]- anion also has the best extraction capability for heavier aromatics (o-xylene, m-xylene, and p-xylene) from common aliphatics (heptane and octane). The MD modeling approach can be a low-cost in silico tool for the high-throughput fast screening of ILs for the LLE of aromatics from aliphatics.
Asunto(s)
Líquidos Iónicos , Aniones , Extracción Líquido-Líquido , Simulación de Dinámica Molecular , Reproducibilidad de los ResultadosRESUMEN
Hydrogen bonds (HBs) play a crucial role in the physicochemical properties of ionic liquids (ILs). To date, HBs between cations and anions (Ca-An) or between cations (Ca-Ca) in ILs have been reported extensively. Here, we provided DFT evidence for the existence of HBs between anions (An-An) in the IL 1-(2-hydroxyethyl)-3-methylimidazolium 4-(2-hydroxyethyl)imidazolide [HEMIm][HEIm]. The thermodynamic stabilities of anionic, cationic, and H2O dimers together with ionic pairs were studied using potential energy scans. The results show that the cation-anion pair is the most stable one, while the HB in the anionic dimer possesses similar thermodynamic stability to the water dimer. The further geometric, spectral and electronic structure analyses demonstrate that the inter-anionic HB meets the general theoretical criteria of traditional HBs. The strength order of four HBs in complexes is cation-anion pair > H2O dimer ≈ cationic dimer > anionic dimer. The energy decomposition analysis indicates that induction and dispersion interactions are the crucial factors to overcome strong Coulomb repulsions, forming inter-anionic HBs. Finally, the presence of inter-anionic HBs in the ionic cluster has been confirmed by a global minimum search for a system containing two ionic pairs. Even though hydroxyl-functionalized cations are more likely to form HBs with anions, there are still inter-anionic HBs between hydroxyl groups in the low-lying structures. Our studies broaden the understanding of HBs in ionic liquids and support the recently proposed concept of anti-electrostatic HBs.
RESUMEN
Construction of single atom catalysts (SACs) with high activity toward electroreduction of CO2 still remains a great challenge. A very simple and truly cost-effective synthetic strategy is proposed to prepare SACs via a impregnation-pyrolysis method, through one-step pyrolysis of graphene oxide aerogel. Compared with other traditional methods, this process is fast and free of repeated acid etching, and thus it has great potential for facile operation and large-scale manufacturing. Both X-ray absorption fine structure and high-angle annular dark-field scanning transmission electron microscopy images confirm the presence of isolated nickel atoms, with a high Ni loading of ≈2.6 wt%. The obtained 3D porous Ni- and N-codoped graphene aerogel exhibits excellent activity toward electroreduction of CO2 to CO, in particular exhibiting a remarkable CO Faradaic efficiency of 90.2%. Density functional theory calculations reveal that free energies for the formation of intermediate *COOH on coordinatively unsaturated NiN sites are significantly lower than that on NiN4 site, suggesting the outstanding activities of CO2 electroreduction originate from coordinatively unsaturated NiN sites in catalysts.
RESUMEN
Atorvastatin is a substrate of cytochrome P450 3a (CYP3a), organic anion-transporting polypeptides (OATPs), breast cancer-resistance protein (BCRP), and P-glycoprotein (P-gp). We aimed to develop a semiphysiologically based pharmacokinetic (semi-PBPK) model involving both enzyme and transporters for predicting the contributions of altered function and expression of CYP3a and transporters to atorvastatin transport in diabetic rats by combining high-fat diet feeding and low-dose streptozotocin injection. Atorvastatin metabolism and transport parameters comes from in situ intestinal perfusion, primary hepatocytes, and intestinal or hepatic microsomes. We estimated the expressions and functions of these proteins and their contributions. Diabetes increased the expression of hepatic CYP3a, OATP1b2, and P-gp but decreased the expression of intestinal CYP3a, OATP1a5, and P-gp. The expression and function of intestinal BCRP were significantly decreased in 10-day diabetic rats but increased in 22-day diabetic rats. Based on alterations in CYP3a and transporters by diabetes, the developed semi-PBPK model was successfully used to predict atorvastatin pharmacokinetics after oral and intravenous doses to rats. Contributions to oral atorvastatin PK were intestinal OATP1a5 < intestinal P-gp < intestinal CYP3a < hepatic CYP3a < hepatic OATP1b2 < intestinal BRCP. Contributions of decreased expression and function of intestinal CYP3a and P-gp by diabetes to oral atorvastatin plasma exposure were almost attenuated by increased expression and function of hepatic CYP3a and OATP1b2. Opposite alterations in oral plasma atorvastatin exposure in 10- and 22-day diabetic rats may be explained by altered intestinal BCRP. In conclusion, the altered atorvastatin pharmacokinetics by diabetes was the synergistic effects of altered intestinal or hepatic CYP3a and transporters and could be predicted using the developed semi-PBPK.
Asunto(s)
Atorvastatina/farmacocinética , Diabetes Mellitus Experimental/metabolismo , Hipercolesterolemia/tratamiento farmacológico , Modelos Biológicos , Miembro 1 de la Subfamilia B de Casetes de Unión a ATP/metabolismo , Transportador de Casetes de Unión a ATP, Subfamilia G, Miembro 2/metabolismo , Animales , Atorvastatina/uso terapéutico , Células Cultivadas , Citocromo P-450 CYP3A/metabolismo , Diabetes Mellitus Experimental/complicaciones , Diabetes Mellitus Experimental/etiología , Dieta Alta en Grasa/efectos adversos , Hepatocitos/metabolismo , Humanos , Inhibidores de Hidroximetilglutaril-CoA Reductasas/farmacocinética , Inhibidores de Hidroximetilglutaril-CoA Reductasas/uso terapéutico , Hipercolesterolemia/etiología , Mucosa Intestinal/metabolismo , Masculino , Microsomas Hepáticos/metabolismo , Cultivo Primario de Células , Ratas , Miembro 1B3 de la Familia de los Transportadores de Solutos de Aniones Orgánicos/metabolismo , Estreptozocina/toxicidadRESUMEN
Ionic liquids (ILs) offer a wide range of promising applications because of their much enhanced properties. However, further development of such materials depends on the fundamental understanding of their hierarchical structures and behaviors, which requires multiscale strategies to provide coupling among various length scales. In this review, we first introduce the structures and properties of these typical ILs. Then, we introduce the multiscale modeling methods that have been applied to the ILs, covering from molecular scale (QM/MM), to mesoscale (CG, DPD), to macroscale (CFD for unit scale and thermodynamics COSMO-RS model and environmental assessment GD method for process scale). In the following section, we discuss in some detail their applications to the four scales of ILs, including molecular scale structures, mesoscale aggregates and dynamics, and unit scale reactor design and process design and optimization of typical IL applications. Finally, we address the concluding remarks of multiscale strategies in the understanding and predictive capabilities of ILs. The present review aims to summarize the recent advances in the fundamental and application understanding of ILs.
RESUMEN
The inherent structure tunability, good affinity with CO2, and nonvolatility of ionic liquids (ILs) drive their exploration and exploitation in CO2 separation field, and has attracted remarkable interest from both industries and academia. The aim of this Review is to give a detailed overview on the recent advances on IL-based materials, including pure ILs, IL-based solvents, and IL-based membranes for CO2 capture and separation from the viewpoint of molecule to engineering. The effects of anions, cations and functional groups on CO2 solubility and selectivity of ILs, as well as the studies on degradability of ILs are reviewed, and the recent developments on functionalized ILs, IL-based solvents, and IL-based membranes are also discussed. CO2 separation mechanism with IL-based solvents and IL-based membranes are explained by combining molecular simulation and experimental characterization. Taking into consideration of the applications and industrialization, the recent achievements and developments on the transport properties of IL fluids and the process design of IL-based processes are highlighted. Finally, the future research challenges and perspectives of the commercialization of CO2 capture and separation with IL-based materials are posed.
RESUMEN
Gold nanoclusters (AuNCs) are attractive electrochemiluminescence (ECL) emitters because of their excellent stability, near IR emission, and biocompatibility. However, their ECL quantum yield is relatively low, and our limited fundamental understanding has hindered rational improvement of this parameter. Herein, we report drastic enhancement of the ECL of ligand-stabilized AuNCs by on-electrode pre-oxidation with triethylamine (TEA) as a co-reactant. The l-methionine-stabilized AuNCs resulted in a record high ECL yield of 66 %. This strategy was successfully extended to other AuNCs, and it is more effective for ligand shells that allow more effective electron transfer. In addition, excitation of the pre-oxidized ECL required a lower potential than conventional methods, and no additional instrument was required. This work opens avenues for solving a challenging problem of AuNC-based ECL probes and enriches fundamental understanding, greatly broadening their potential applications.
RESUMEN
Enterovirus 71 (EV-A71) and coxsackievirus A16 (CV-A16) are major pathogens of hand, foot, and mouth disease (HFMD) and have been associated with consecutive outbreaks of HFMD in China over the past years. Although several other human enteroviruses (HEVs) have also acted as causative agents of HFMD, published information on their roles in the prevalence of HFMD is limited. This study was conducted to reveal the characteristics of the pathogenic spectrum and molecular epidemiology of the non-EV-71 and -CV-A16 HEVs in Anyang City, which is located in north-central China and has a population of five million. From 2011 to 2015, 2270 samples were collected from HFMD patients (3.89 ± 1.06 years of age), and 1863 HEV-positive samples, including 524 samples with 23 non-EV-71 and non-CV-A16 serotypes, were identified. Based on the nucleotide sequence of the VP1 gene, 6 common non-EV-71 and non-CV-A16 HEVs, including coxsackievirus A2, A6, A10, A14, B2, and B5, were studied to determine their phylogenies and selective pressures. Phylogenetic analyses revealed a high level of genetic divergence and a pattern of lineage replacement over time in Mainland China. Selective pressure analyses showed that purifying selection was predominant in the evolution of the VP1 gene, whereas positive selection acted on individual codons. Overall, non-EV-71 and non-CV-A16 HEVs were important constituents of the pathogenic spectrum of HFMD in Anyang City during 2011-2015. Some of these HEVs with complex and active phylogenies represent a potential threat to public health, suggesting that long-term monitoring of these pathogens should be implemented to prevent HFMD outbreaks.
Asunto(s)
Enterovirus/genética , Enfermedad de Boca, Mano y Pie/epidemiología , Enfermedad de Boca, Mano y Pie/virología , Proteínas de la Cápside/genética , Preescolar , China/epidemiología , Brotes de Enfermedades , Enterovirus/patogenicidad , Femenino , Pruebas Genéticas , Genotipo , Humanos , Masculino , Filogenia , Prevalencia , ARN Viral/genética , Reacción en Cadena en Tiempo Real de la Polimerasa , SerogrupoRESUMEN
Due to their attractive physico-chemical properties, ionic liquids (ILs) are increasingly used as deposition electrolytes. This review summarizes recent advances in electrodeposition in ILs and focuses on its similarities and differences with that in aqueous solutions. The electrodeposition in ILs is divided into direct and template-assisted deposition. We detail the direct deposition of metals, alloys and semiconductors in five types of ILs, including halometallate ILs, air- and water-stable ILs, deep eutectic solvents (DESs), ILs with metal-containing cations, and protic ILs. Template-assisted deposition of nanostructures and macroporous structures in ILs is also presented. The effects of modulating factors such as deposition conditions (current density, current density mode, deposition time, temperature) and electrolyte components (cation, anion, metal salts, additives, water content) on the morphology, compositions, microstructures and properties of the prepared materials are highlighted.
RESUMEN
In this study, two novel QSPR models have been developed to predict the viscosity of ionic liquids (ILs) using multiple linear regression (MLR) and support vector machine (SVM) algorithms based on Conductor-like Screening Model for Real Solvents (COSMO-RS) molecular descriptors (Sσ-profile). A total data set of 1502 experimental viscosity data points under a wide range of temperatures and pressures for 89 ILs, is employed to train and verify the models. The Average Absolute Relative Deviation (AARD) values of the total data set of the MLR and SVM are 10.68% and 6.58%, respectively. The results show that both the MLR and SVM models can predict the viscosity of ILs, and the performance of the nonlinear model developed using the SVM is superior to the linear model (MLR). Furthermore, the derived models also can throw some light onto structural characteristics that are related to the viscosity of ILs.
RESUMEN
Deep eutectic solvents (DESs) have emerged as promising alternative candidates for CO2 capture in recent years. In this work, several novel DESs were firstly prepared to enhance CO2 absorption. Structural and physical properties of DESs were investigated, as well as their absorption performance of CO2. A distinct depression in the melting point up to 80 K of DESs was observed compared with that of BMIMCl. The observed red shifts of the C2H group in an imidazolium ring and its chemical shifts downfield in NMR spectra are indicative of a hydrogen bond interaction between BMIMCl and MEA. In particular, CO2 uptake in MEA : ILs (4 : 1) at room temperature and atmospheric pressure is up to 21.4 wt%, which is higher than that of 30 wt% MEA (13%). A hydrogen bond related mechanism was proposed in which ILs act as a medium to improve CO2 uptake through hydrogen bonds. Finally, the firstly reported overall heat of CO2 absorption is slightly higher than that of 30 wt% MEA, implying that the hydrogen bonds of DESs contribute to the overall heat of CO2 absorption. This study reveals that the heat of CO2 absorption can be tailored by the proper molar ratio of MEA and ILs.
RESUMEN
Potential applications of ILs require the knowledge of the physicochemical properties of ionic liquid (IL) mixtures. In this work, a series of semi-empirical models were developed to predict the density, surface tension, heat capacity and thermal conductivity of IL mixtures. Each semi-empirical model only contains one new characteristic parameter, which can be determined using one experimental data point. In addition, as another effective tool, artificial neural network (ANN) models were also established. The two kinds of models were verified by a total of 2304 experimental data points for binary mixtures of ILs and molecular compounds. The overall average absolute deviations (AARDs) of both the semi-empirical and ANN models are less than 2%. Compared to previously reported models, these new semi-empirical models require fewer adjustable parameters and can be applied in a wider range of applications.
RESUMEN
Acidic and basic sites of catalysts are essential for CO2 capture and activation. In this work, Zr, N-ZnO/ZnAl-LDH-IL composites in ionic liquid and methanol systems were fabricated, and applied to catalyze the synthesis of ethylene carbonate (EC) from ethylene glycol (EG) and CO2 with about 4.76 mmolEC gCat.-1 h-1. The composites showed more strong basic sites due to the effective induction of reactive groups on the catalyst surface by Zr doping, resulting in an increase of pyridinic-N groups from 5.48% to 22.25%. More C atoms adjacent to pyridinic-N as strong basic sites was conducive to the activation of CO2 and EG. In addition, the possible catalytic pathway and mechanism of the composites for synthesizing EC as well as the doping of La, Fe, Ce, and Cu were also investigated, which provides an effective strategy for regulating the acid-base centers on the catalyst surface through ionic liquids and methanol solvents.
RESUMEN
Recycling flexible polyurethane foam (F-PUF) scraps is difficult due to the material's high cross-linking structure. In this work, a wedge-block-reinforced extruder with a considerable enhanced shear extrusion and stretching area between the rotating screw and the stationary wedge blocks was utilized to recycle F-PUF scraps into powder containing surface-active hydroxyl groups. The powder was then utilized for the quantitative replacement of polyol in the foaming process. Characterizations showed that the continuous shear extrusion and stretching during the extrusion process reduced the volume mean diameter (VMD) of the F-PUF powder obtained by extruding it three times at room temperature to reach 54 µm. The -OH number (OHN) of the powder prepared by extruding it three times reached 19.51 mgKOH/g due to the mechanochemical effect of the powdering method. The F-PUF containing recycled powder used to quantitively replace 10 wt.% polyol was similar in microstructure and chemical structure to the original F-PUF, with a compression set of 2%, indentation load deflection of 21.3 lbf, resilience of 43.4%, air permeability of 815.7 L/m2·s, tensile strength of 73.0 Kpa, and tear strength of 2.3 N/cm, indicating that the recycling method has potential for industrial applications.