Gas-phase F-atom migration reaction of deprotonated N-fluoroarenesulfonamides.

RATIONALE: Recently N-Fluoroarenesulfonamides (ArSO2 NHF) were found to be promising precursors for the preparation of N-fluorobenzenesulfonimide derivatives without applying F2 . However, very few studies have discussed the mass spectrometric behaviors of ArSO2 NHF with N-F structure. METHODS: In this article, we applied high-resolution electrospray ionization tandem mass spectrometry (HR-ESI-MS/MS) to study the effect on the mass spectrometric behaviors of ArSO2 NHF after the introduction of the F-atom to the N-atom of ArSO2 NH2 . RESULTS: High-resolution electrospray ionization mass spectrometry (HR-ESI-MS) experiments showed that ArSO2 NHF produced only good signals in negative ion mode, and the dominating product ion SO2 F- at m/z 83 was observed in all HR-ESI-MS/MS of ArSO2 NF- with different substituents in the Ar group. The formation of the product ion SO2 F- was proof of the gas-phase F-atom migration rearrangement from the N-atom to the S-atom in ESI-MS/MS of ArSO2 NF- . CONCLUSION: To fully explain the gas-phase reaction mechanism from ArSO2 NF- to SO2 F- , we studied the HR-ESI-MS/MS of deprotonated ArSO2 NHF and also performed theoretical calculations. Both results confirmed that ArSO2 NF- first underwent Smiles rearrangement to yield intermediate I (INT1) ArNFSO2 - , and then the F-atom of ArNFSO2 - migrated from the N-atom to the S-atom to form intermediate II (INT2) ArN- SO2 F, which finally dissociated to SO2 F- at m/z 83 with loss of a neutral nitrene (ArN). All these results showed that the formation of the product ion SO2 F- from ArSO2 NF- was a common and intrinsic gas-phase reactivity of ArSO2 NF- .

Reversal of the Regioselectivity of Iron-Promoted Hydrogenation and Hydrohalogenation of gem-Difluoroalkenes.

The reaction regioselectivity of gem-difluoroalkenes is dependent on the intrinsic polarity. Thus, the reversal of the regioselectivity of the addition reaction of gem-difluoroalkenes remains a formidable challenge. Herein, we described an unprecedented reversal of regioselectivity of hydrogen atom transfer (HAT) to gem-difluoroalkenes triggered by Fe-H species for the formation of difluoroalkyl radicals. Hydrogenation of the in situ generated radicals gave difluoromethylated products. Mechanism experiments and theoretical studies revealed that the kinetic effect of the irreversible HAT process resulted in the reversal of the regioselectivity of this scenario, leading to the formation of a less stable α-difluoroalkyl radical regioisomer. On basis of this new reaction of gem-difluoroalkene, the iron-promoted hydrohalogenation of gem-difluoroalkenes for the efficient synthesis of aliphatic chlorodifluoromethyl-, bromodifluoromethyl- and iododifluoromethyl-containing compounds was developed. Particularly, this novel hydrohalogenation of gem-difluoroalkenes provided an effect and large-scale access to various iododifluoromethylated compounds of high value for synthetic application.

Tunable Interband Transitions in Twisted h-BN/Graphene Heterostructures.

In twisted h-BN/graphene heterostructures, the complex electronic properties of the fast-traveling electron gas in graphene are usually considered to be fully revealed. However, the randomly twisted heterostructures may also have unexpected transition behaviors, which may influence the device performance. Here, we study the twist-angle-dependent coupling effects of h-BN/graphene heterostructures using monochromatic electron energy loss spectroscopy. We find that the moiré potentials alter the band structure of graphene, resulting in a redshift of the intralayer transition at the M point, which becomes more pronounced up to 0.22 eV with increasing twist angle. Furthermore, the twisting of the Brillouin zone of h-BN relative to the graphene M point leads to tunable vertical transition energies in the range of 5.1-5.6 eV. Our findings indicate that twist-coupling effects of van der Waals heterostructures should be carefully considered in device fabrications, and the continuously tunable interband transitions through the twist angle can serve as a new degree of freedom to design optoelectrical devices.

Hepatocyte-derived MANF mitigates ethanol-induced liver steatosis in mice via enhancing ASS1 activity and activating AMPK pathway.

Hepatic steatosis plays a detrimental role in the onset and progression of alcohol-associated liver disease (ALD). Mesencephalic astrocyte-derived neurotrophic factor (MANF) is an evolutionarily conserved protein related to the unfolded protein response. Recent studies have demonstrated that MANF plays an important role in liver diseases. In this study, we investigated the role of MANF in ethanol-induced steatosis and the underlying mechanisms. We showed that the hepatic MANF expression was markedly upregulated in mouse model of ALD by chronic-plus-single-binge ethanol feeding. Moreover, after chronic-plus-binge ethanol feeding, hepatocyte-specific MANF knockout (HKO) mice displayed more severe hepatic steatosis and liver injury than wild-type (WT) control mice. Immunoprecipitation-coupled MS proteomic analysis revealed that arginosuccinate synthase 1 (ASS1), a rate-limiting enzyme in the urea cycle, resided in the same immunoprecipitated complex with MANF. Hepatocyte-specific MANF knockout led to decreased ASS1 activity, whereas overexpression of MANF contributed to enhanced ASS1 activity in vitro. In addition, HKO mice displayed unique urea cycle metabolite patterns in the liver with elevated ammonia accumulation after ethanol feeding. ASS1 is known to activate AMPK by generating an intracellular pool of AMP from the urea cycle. We also found that MANF supplementation significantly ameliorated ethanol-induced steatosis in vivo and in vitro by activating the AMPK signaling pathway, which was partly ASS1 dependent. This study demonstrates a new mechanism in which MANF acts as a key molecule in maintaining hepatic lipid homeostasis by enhancing ASS1 activity and uncovers an interesting link between lipid metabolism and the hepatic urea cycle under excessive alcohol exposure.

Structure of Amorphous Two-Dimensional Materials: Elemental Monolayer Amorphous Carbon versus Binary Monolayer Amorphous Boron Nitride.

The structure of amorphous materials has been debated since the 1930s as a binary question: amorphous materials are either Zachariasen continuous random networks (Z-CRNs) or Z-CRNs containing crystallites. It was recently demonstrated, however, that amorphous diamond can be synthesized in either form. Here we address the question of the structure of single-atom-thick amorphous monolayers. We reanalyze the results of prior simulations for amorphous graphene and report kinetic Monte Carlo simulations based on alternative algorithms. We find that crystallite-containing Z-CRN is the favored structure of elemental amorphous graphene, as recently fabricated, whereas the most likely structure of binary monolayer amorphous BN is altogether different than either of the two long-debated options: it is a compositionally disordered "pseudo-CRN" comprising a mix of B-N and noncanonical B-B and N-N bonds and containing "pseudocrystallites", namely, honeycomb regions made of noncanonical hexagons. Implications for other nonelemental 2D and bulk amorphous materials are discussed.

Intrinsically Honeycomb-Patterned Hydrogenated Graphene.

Since the advent of graphene ushered the era of 2D materials, many forms of hydrogenated graphene have been reported, exhibiting diverse properties ranging from a tunable bandgap to ferromagnetic ordering. Patterned hydrogenated graphene with micron-scale patterns has been fabricated by lithographic means. Here, successful millimeter-scale synthesis of an intrinsically honeycomb-patterned form of hydrogenated graphene on Ru(0001) by epitaxial growth followed by hydrogenation is reported. Combining scanning tunneling microscopy observations with density-functional-theory (DFT) calculations, it is revealed that an atomic-hydrogen layer intercalates between graphene and Ru(0001). The result is a hydrogen honeycomb structure that serves as a template for the final hydrogenation, which converts the graphene into graphane only over the template, yielding honeycomb-patterned hydrogenated graphene (HPHG). In effect, HPHG is a form of patterned graphane. DFT calculations find that the unhydrogenated graphene regions embedded in the patterned graphane exhibit spin-polarized edge states. This type of growth mechanism provides a new pathway for the fabrication of intrinsically patterned graphene-based materials.

Observation of an Incommensurate Charge Density Wave in Monolayer TiSe_{2}/CuSe/Cu(111) Heterostructure.

TiSe_{2} is a layered material exhibiting a commensurate (2×2×2) charge density wave (CDW) with a transition temperature of ∼200 K. Recently, incommensurate CDW in bulk TiSe_{2} draws great interest due to its close relationship with the emergence of superconductivity. Here, we report an incommensurate superstructure in monolayer TiSe_{2}/CuSe/Cu(111) heterostructure. Characterizations by low-energy electron diffraction and scanning tunneling microscopy show that the main wave vector of the superstructure is ∼0.41a^{*} or ∼0.59a^{*} (here a^{*} is in-plane reciprocal lattice constant of TiSe_{2}). After ruling out the possibility of moiré superlattices, according to the correlation of the wave vectors of the superstructure and the large indirect band gap below the Fermi level, we propose that the incommensurate superstructure is associated with an incommensurate charge density wave (I-CDW). It is noteworthy that the I-CDW is robust with a transition temperature over 600 K, much higher than that of commensurate CDW in pristine TiSe_{2}. Based on our data and analysis, we present that interface effect may play a key role in the formation of the I-CDW state.

Polymelamine Formaldehyde-Coated MIL-101 as an Efficient Dual-Functional Core-Shell Composite to Catalyze the Deacetalization-Knoevenagel Tandem Reaction.

Porous organic polymer (POP) coated on a metal-organic framework (MOF) has the functions and advantages of MOF and POP at the same time and has excellent catalytic ability. In this study, an efficient dual-functional core-shell composite MOF@POP with Lewis acid and Brønsted base sites was synthesized using the impregnation method in which MIL-101(Cr) was the core component and polymelamine formaldehyde (PMF) was the shell component. Most importantly, the obtained MIL-101(Cr)@PMF showed perfect catalytic activity in the deacetalization-Knoevenagel tandem reaction. In addition, it could still maintain ultrahigh physical and chemical stability.

Sizable Band Gap in Epitaxial Bilayer Graphene Induced by Silicene Intercalation.

Opening a band gap in bilayer graphene (BLG) is of significance for potential applications in graphene-based electronic and photonic devices. Here, we report the generation of a sizable band gap in BLG by intercalating silicene between BLG and Ru substrate. We first grow high-quality Bernal-stacked BLG on Ru(0001) and then intercalate silicene to the interface between the BLG and Ru, which is confirmed by low-energy electron diffraction and scanning tunneling microscopy. Raman spectroscopy shows that the G and 2D peaks of the intercalated BLG are restored to the freestanding-BLG features. Angle-resolved photoelectron spectroscopy measurements show that a band gap of about 0.2 eV opens in the BLG. Density functional theory calculations indicate that the large-gap opening results from a cooperative contribution of the doping and rippling/strain in the BLG. This work provides insightful understanding on the mechanism of band gap opening in BLG and enhances the potential of graphene-based device development.

Insulating SiO2 under Centimeter-Scale, Single-Crystal Graphene Enables Electronic-Device Fabrication.

Graphene on SiO2 enables fabrication of Si-technology-compatible devices, but a transfer of these devices from other substrates and direct growth have severe limitations due to a relatively small grain size or device-contamination. Here, we show an efficient, transfer-free way to integrate centimeter-scale, single-crystal graphene, of a quality suitable for electronic devices, on an insulating SiO2 film. Starting with single-crystal graphene grown epitaxially on Ru(0001), a SiO2 film is grown under the graphene by stepwise intercalation of silicon and oxygen. Thin (∼1 nm) crystalline or thicker (∼2 nm) amorphous SiO2 has been produced. The insulating nature of the thick amorphous SiO2 is verified by transport measurements. The device-quality of the corresponding graphene was confirmed by the observation of Shubnikov-de Haas oscillations, an integer quantum Hall effect, and a weak antilocalization effect within in situ fabricated Hall bar devices. This work provides a reliable platform for applications of large-scale, high-quality graphene in electronics.

Visualizing Anisotropic Oxygen Diffusion in Ceria under Activated Conditions.

Oxygen reactivity plays a key role in the performance of ceria-based catalysts. Aberration-corrected transmission electron microscopy and molecular dynamics simulations were used to study the oxygen atom diffusion in ceria under activated conditions. Reactive oxygen atom and its real-time diffusion were visualized. The interplay between cerium and oxygen atoms originating from a Coulomb interaction was revealed by the out-of-plane buckling of cerium atoms associated with oxygen transport. Anisotropic oxygen atom diffusion that depends on crystal orientations was discovered, demonstrating a preferential [001] crystallographic diffusion pathway. These findings reveal prospects for applications of anisotropic orientation-relevant fluorite-structured oxides.

Spontaneous Formation of 1D Pattern in Monolayer VSe2 with Dispersive Adsorption of Pt Atoms for HER Catalysis.

Creation of functional patterns in two-dimensional (2D) materials provides opportunities to extend their potential for applications. Transition-metal dichalcogenides (TMDCs) are suitable 2D materials for pattern generation because of properties including alterable polymorphic phases, easy chalcogen-vacancy formation, metal-atom insertion, and alloying. Such patterning can be used for selective functionalization. Here we report the spontaneous formation of long-range, well-ordered 1D patterns in monolayer vanadium diselenide (VSe2) by a single annealing stage during growth. Atomic-resolution images in real space combined with density-functional-theory (DFT) calculations reveal the 1D features of patterned VSe2. Further experimental characterization of the intermediate states in the growth process confirm the spontaneous formation of the 1D pattern by annealing-induced Se-deficient linear defects. The 1D pattern can be reversibly transformed to homogenous VSe2 monolayer by reintroducing Se atoms. Moreover, additional experiments demonstrate that a dispersive deposition of Pt atoms along the 1D structures of patterned VSe2 is achieved, while DFT calculations find that their catalytic activity for hydrogen evolution reaction (HER) is as good as that of Pt surfaces. The formation of long-range, well-ordered 1D patterns not only demonstrates an effective way of dimension modulation in 2D materials but also enriches the potential of intrinsically patterned 2D materials for promising catalytic activities.

Direct Cation Exchange in Monolayer MoS_{2} via Recombination-Enhanced Migration.

In addition to their unique optical and electronic properties, two-dimensional materials provide opportunities to directly observe atomic-scale defect dynamics. Here we use scanning transmission electron microscopy to observe substitutional Re impurities in monolayer MoS_{2} undergo direct exchanges with neighboring Mo atoms in the lattice. Density-functional-theory calculations find that the energy barrier for direct exchange, a process that has only been studied as a diffusion mechanism in bulk materials, is too large for either thermal activation or energy directly transferred from the electron beam. The presence of multiple sulfur vacancies next to the exchanged Re-Mo pair, as observed by electron microscopy, does not lower the energy barrier sufficiently to account for the observed atomic exchange. Instead, the calculations find that a Re dopant and surrounding sulfur vacancies introduce an ever-changing set of deep levels in the energy gap. We propose that these levels mediate an "explosive" recombination-enhanced migration via multiple electron-hole recombination events. As a proof of concept, we also show that Re-Mo direct exchange can be triggered via controlled creation of sulfur vacancies. The present experimental and theoretical findings lay a fundamental framework towards manipulating single substitutional dopants in two-dimensional materials.

Discovery of ß-arrestin-biased ß2-adrenoceptor agonists from 2-amino-2-phenylethanol derivatives.

ß-Arrestins are a small family of proteins important for signal transduction at G protein-coupled receptors (GPCRs). ß-Arrestins are involved in the desensitization of GPCRs. Recently, biased ligands possessing different efficacies in activating the G protein- versus the ß-arrestin-dependent signals downstream of a single GPCR have emerged, which can be used to selectively modulate GPCR signal transduction in such a way that desirable signals are enhanced to produce therapeutic effects while undesirable signals of the same GPCR are suppressed to avoid side effects. In the present study, we evaluated agonist bias for compounds developed along a drug discovery project of ß2-adrenoceptor agonists. About 150 compounds, including derivatives of fenoterol, 2-amino-1-phenylethanol and 2-amino-2-phenylethanol, were obtained or synthesized, and initially screened for their ß-adrenoceptor-mediated activities in the guinea pig tracheal smooth muscle relaxation assay or the cardiomyocyte contractility assay. Nineteen bioactive compounds were further assessed using both the HTRF cAMP assay and the PathHunter ß-arrestin assay. Their concentration-response data in stimulating cAMP synthesis and ß-arrestin recruitment were applied to the Black-Leff operational model for ligand bias quantitation. As a result, three compounds (L-2, L-4, and L-12) with the core structure of 5-(1-amino-2-hydroxyethyl)-8-hydroxyquinolin-2(1H)-one were identified as a new series of ß-arrestin-biased ß2-adrenoceptor agonists, whereas salmeterol was found to be Gs-biased. These findings would facilitate the development of novel drugs for the treatment of both heart failure and asthma.

Epitaxial growth and physical properties of 2D materials beyond graphene: from monatomic materials to binary compounds.

The discovery of graphene opened a door for manufacturing and investigating two-dimensional (2D) materials. After more than ten years of development, 2D materials have become one of the most important topics in materials research, with dozens of new materials having been synthesized experimentally and even more predicted theoretically. In this review, we provide a comprehensive overview of the fabrication of 2D materials based on epitaxial growth in an ultra-high vacuum (UHV) experimental environment and the investigation of their physical and chemical properties. In particular, we focus on techniques like intercalation, templated molecular adsorption, and direct selenization and tellurization of metal substrates. We discuss progress in fabrication methods of monatomic and binary 2D materials and highlight their interesting and quite unusual physical properties. Finally, we assess future directions of research in this field, where breakthroughs can be expected, and indicate where investments in additional research might be most rewarding scientifically.

Protective effects of a novel water-soluble biphenyl compound WLP-S-14 against acute-on-chronic liver failure in rats.

This study investigated the therapeutic effects of a water-soluble biphenyl compound, WLP-S-14, in acute-on-chronic liver failure (ACLF). Wistar rats were injected intraperitoneally with porcine serum twice a week for 8 weeks prior to administration of 600 mg/kg D-galactosamine and 50 µg/kg lipopolysaccharide to induce ACLF. Study groups were treated intravenously with saline or with 100 or 200 mg/kg WLP-S-14. WLP-S-14 ameliorated ACLF with significant reductions in the mortality rate and transaminase levels, indicating improved liver function. The mechanism underlying these effects may involve decreased levels of tumor necrosis factor-α and interleukin-6, with associated inhibition of apoptotic pathways.

Mo-Terminated Edge Reconstructions in Nanoporous Molybdenum Disulfide Film.

The catalytic and magnetic properties of molybdenum disulfide (MoS2) are significantly enhanced by the presence of edge sites. One way to obtain a high density of edge sites in a two-dimensional (2D) film is by introducing porosity. However, the large-scale bottom-up synthesis of a porous 2D MoS2 film remains challenging and the correlation of growth conditions to the atomic structures of the edges is not well understood. Here, using molecular beam epitaxy, we prepare wafer-scale nanoporous MoS2 films under conditions of high Mo flux and study their catalytic and magnetic properties. Atomic-resolution electron microscopy imaging of the pores reveals two new types of reconstructed Mo-terminated edges, namely, a distorted 1T (DT) edge and the Mo-Klein edge. Nanoporous MoS2 films are magnetic up to 400 K, which is attributed to the presence of Mo-terminated edges with unpaired electrons, as confirmed by density functional theory calculation. The small hydrogen adsorption free energy at these Mo-terminated edges leads to excellent activity for the hydrogen evolution reaction.

Palladium Nanoparticles Encapsulated in the MIL-101-Catalyzed One-Pot Reaction of Alcohol Oxidation and Aldimine Condensation.

A bifunctional catalyst, Pd nanoparticles (NPs) encapsulated in MIL-101, has been synthesized by capillary impregnation. The as-prepared Pd@MIL-101 was characterized by powder X-ray diffraction, N2 physisorption, X-ray photoelectron spectroscopy, transmission electron microscopy, and high-angle annular dark field scanning transmission electron microscopy, indicating that Pd NPs were highly dispersed in the pores of MIL-101 without deposition of the nanoparticles on the external surface or aggregation. The bifunctional catalyst of Pd@MIL-101 exhibited highly catalytic activity for alcohol oxidation and aldimine condensation one-pot reactions, where Pd NPs affords good oxidation activity and MIL-101 offers Lewis acidity. In particular, Pd@MIL-101 yielded an effective catalytic performance with toluene as the solvent, K2CO3 as the co-catalyst, and 353 K as the optimum reaction temperature for the one-pot reaction. After five cycles of reuse, Pd@MIL-101 still shows high catalytic performance. Above all, it is found that the enhanced catalytic performance was achieved via the synergistic cooperation of MIL-101 and Pd NPs.

Direct Four-Probe Measurement of Grain-Boundary Resistivity and Mobility in Millimeter-Sized Graphene.

Grain boundaries (GBs) in polycrystalline graphene scatter charge carriers, which reduces carrier mobility and limits graphene applications in high-speed electronics. Here we report the extraction of the resistivity of GBs and the effect of GBs on carrier mobility by direct four-probe measurements on millimeter-sized graphene bicrystals grown by chemical vapor deposition (CVD). To extract the GB resistivity and carrier mobility from direct four-probe intragrain and intergrain measurements, an electronically equivalent extended 2D GB region is defined based on Ohm's law. Measurements on seven representative GBs find that the maximum resistivities are in the range of several kΩ·µm to more than 100 kΩ·µm. Furthermore, the mobility in these defective regions is reduced to 0.4-5.9‰ of the mobility of single-crystal, pristine graphene. Similarly, the effect of wrinkles on carrier transport can also be derived. The present approach provides a reliable way to directly probe charge-carrier scattering at GBs and can be further applied to evaluate the GB effect of other two-dimensional polycrystalline materials, such as transition-metal dichalcogenides (TMDCs).

Sequence of Silicon Monolayer Structures Grown on a Ru Surface: from a Herringbone Structure to Silicene.

Silicon-based two-dimensional (2D) materials are uniquely suited for integration in Si-based electronics. Silicene, an analogue of graphene, was recently fabricated on several substrates and was used to make a field-effect transistor. Here, we report that when Ru(0001) is used as a substrate, a range of distinct monolayer silicon structures forms, evolving toward silicene with increasing Si coverage. Low Si coverage produces a herringbone structure, a hitherto undiscovered 2D phase of silicon. With increasing Si coverage, herringbone elbows evolve into silicene-like honeycomb stripes under tension, resulting in a herringbone-honeycomb 2D superlattice. At even higher coverage, the honeycomb stripes widen and merge coherently to form silicene in registry with the substrate. Scanning tunneling microscopy (STM) was used to image the structures. The structural stability and electronic properties of the Si 2D structures, the interaction between the Si 2D structures and the Ru substrate, and the evolution of the distinct monolayer Si structures were elucidated by density functional theory (DFT) calculations. This work paves the way for further investigations of monolayer Si structures, the corresponding growth mechanisms, and possible functionalization by impurities.