RESUMEN
Organic polyradicals with a high-spin ground state and quantum magnetic properties suitable for spin manipulation are valuable materials for diverse innovative technologies, including quantum devices. However, the typically high reactivity and low stability of conventional polyradicals present a major obstacle to such applications. In this study, a highly stable carbon-centered triradical TR with a quartet ground state and excellent stability (τ1/2 of â¼90 days in air-saturated toluene at room temperature) is achieved, which shows apposite magnetic anisotropy and Zeeman splitting partition with favorable addressability. By virtue of the optimal stability, thorough structural and magnetic characterizations are realized. With X-ray crystallography unambiguously proving the molecular structure, the quartet ground state (ΔED-Q = 0.78 kcal/mol) is confirmed by the SQUID measurements, while the cw- and pulsed EPR techniques offer additional supportive evidence for the high-spin nature. Remarkably, owing to the easily attained magnetic anisotropy, selective excitations between different Zeeman splitting levels are successfully demonstrated with TR in its frozen toluene solution without the requirement for special alignment, which is unprecedented for organic polyradicals. Along with the millisecond spin-lattice relaxation and microsecond coherence time manifested by TR, this triradical is promising for potential coherent spin manipulation applications as a multienergy-level quantum information carrier.
RESUMEN
BACKGROUND AND AIM: Two oral antivirals (Nirmatrelvir- ritonavir and Azvudine) are widely used in China practice during the Omicron wave of the pandemic. However, little evidence regarding the real-world effectiveness of these two oral antivirals in in-hospital patients. We aimed to evaluate the clinical effectiveness of nirmatrelvir-ritonavir versus azvudine among adult hospitalized patients with COVID-19. METHODS: This retrospective cohort study used data from three Chinese PLA General Hospital medical centres. Hospitalized patients with COVID-19 treated with azvudine or nirmatrelvir-ritonavir from Dec 10, 2022, to February 20, 2023, and did not require invasive ventilation support on admission were eligible for inclusion. RESULTS: After exclusions and propensity-score matching, the final analysis included 486 azvudine recipients and 486 nirmatrelvir-ritonavir recipients. By 28 days of initiation of the antivirus treatment, the crude incidence rate of all-cause death was similar in both types of antivirus treatment (nirmatrelvir-ritonavir group 2.8 events 1000 person-days [95% CI, 2.1-3.6] vs azvudine group 3.4 events/1000 person-days [95% CI, 2.6-4.3], P = 0.38). Landmark analysis showed that all-cause death was lower in the nirmatrelvir-ritonavir (3.5%) group than the azvudine (6.8%, P = 0.029) within the initial 10-day admission period, while no significant difference was observed for results between 10 and 28 days follow-up. There was no significant difference between the nirmatrelvir-ritonavir group and the azvudine group in cumulative incidence of the composite disease progression event (8.6% with nirmatrelvir-ritonavir vs. 10.1% with azvudine, HR, 1.22; 95% CI 0.80-1.86, P = 0.43). CONCLUSION: Among patients hospitalized with COVID-19 during the omicron wave in Beijing, similar in-hospital clinical outcomes on 28 days were observed between patients receiving nirmatrelvir-ritonavir and azvudine. However, it is worth noticing that nirmatrelvir-ritonavir appears to hold an advantage over azvudine in reducing early mortality. Further randomized controlled trials are needed to verify the efficacy of those two antivirus medications especially in early treatment.
Asunto(s)
COVID-19 , Adulto , Humanos , Estudios Retrospectivos , Ritonavir/uso terapéutico , Tratamiento Farmacológico de COVID-19 , Pacientes Internos , Hospitales Generales , Antivirales/uso terapéuticoRESUMEN
Stable carbon-based polyradicals exhibiting strong spin-spin coupling and slow depolarization processes are particularly attractive functional materials. A new molecular motif synthesized by a convenient method that allows the integration of stable, high-spin radicals to (hetero)aromatic polycycles has been developed, as illustrated by a non-Kekulé diradical showing a triplet ground state with long persistency (τ1/2 ≈31â h) in air. Compared to the widely used 1,3-phenylene, the newly designed (diaza)pyrene-4,10-diyl moiety is for the first time demonstrated to confer ferromagnetic (FM) spin coupling, allowing delocalized non-disjoint SOMOs. With the X-ray crystallography unambiguously proving the diradical structure, the triplet ground state was thoroughly characterized. A large ΔES-T of 1.1â kcal/mol, proving the strong FM coupling effect, was revealed consistently by superconducting quantum interference device (SQUID) measurements and variable-temperature electron paramagnetic resonance (EPR) spectroscopy, while the zero-field splitting and triplet nutation characters were examined by continuous-wave and pulsed EPR spectroscopy. A millisecond spin-lattice relaxation time was also detected. The current study not only offers a new molecular motif enabling FM coupling between carbon-based spins, but more importantly presents a general method for installing stable polyradicals into functional π-systems.
RESUMEN
Legionella pneumophila widely exists in natural and artificial water environments, which enables it to infect people. L. pneumophila infection causes Legionnaires' disease (LD), which is a significant but relatively uncommon respiratory infection. Approximately 90% of LD is caused by L. pneumophila serogroup 1 (Lp1). Meteorological conditions may affect the infectivity and virulence of Lp1, but the exact relationship between them is still unclear. In this study, we evaluated the virulence of Lp1 by screening of total 156 Lp1 strains isolated from cooling tower water in different regions of China by detecting their abilities to activate NF-κB signaling pathway in vitro. In addition, we screened the distribution of some selected virulence genes in these strains. The virulence, virulence gene distribution, and the meteorological factors were analyzed. We found that both the virulence and the distribution of virulence genes had a certain regional and meteorological correlation. Although the loss of several virulence genes showed significant effects on the virulence of Lp1 strains, the distribution of virulence genes had very limited effects on the virulence of Lp1. IMPORTANCE LD is likely to be underrecognized in many countries. Due to the widespread existence of L. pneumophila in natural and artificial water environments and to the lack of cross-protection against different strains, L. pneumophila is a potentially serious threat to human health. Therefore, effective monitoring of the virulence of L. pneumophila in the water environment is very important to prevent and control the prevalence of LD. Understanding the virulence of L. pneumophila can not only help us to predict the risk of possible outbreaks in advance but can also enable more targeted clinical treatment. This study highlights the importance of understanding the epidemiology and ecology of L. pneumophila isolated from public facilities in terms of public health and biology. Due to the potential for water sources to harbor and disseminate L. pneumophila and to the fact that geographical conditions influence the virulence of L. pneumophila, timely and accurate L. pneumophila virulence surveillance is urgently needed.
Asunto(s)
Legionella pneumophila , Enfermedad de los Legionarios , China/epidemiología , Brotes de Enfermedades , Ecología , Humanos , Enfermedad de los Legionarios/epidemiología , Microbiología del AguaRESUMEN
Polycyclic aromatic hydrocarbon (PAH) structures with suitable electron-withdrawing groups are useful building blocks for developing optical and electron-transporting materials. Here, we report the application of a double benzannulation process to the syntheses of PAH diimides with enlarged π-frameworks featuring a central anthracene moiety. The preparations are realized by copper-catalyzed [4+2] cycloaddition of ethynyl-substituted aromatic dicarboximide to 2,5-bis(phenylethynyl)terephthalaldehyde, followed by intramolecular photocyclization or direct arylation via Heck cross coupling. A central symmetric benzo[1,2-k:4,5-k']-bis(fluoranthene)-3,4,12,13-tetracarboxyl diimide (BFDI) is acquired, with the single crystal structure revealing its completely planar polycyclic skeleton. Such a shape-persistent PAH expectedly exhibits a tendency to stack face-to-face and forms J-aggregates. Moreover, BFDI can be difunctionalized site-selectively at the reactive 9 and 10 positions of the anthracene unit and then applied to prepare conjugated polymers. When coupled with 1,4-diketopyrrolo[3,4-c]-pyrrole (DPP) via thiophene and dithiophene linkers, two polymers with significantly broadened absorption bands extended to the near-infrared regime are obtained, evidencing the effective π-conjugative extension ability of BFDI unit.
RESUMEN
A molecule featuring two distinct cooperatively grown J-aggregates is investigated. Interestingly, when cooling a hot monomer solution, the thermodynamically less stable J1 is exclusively formed even at a particularly slowed temperature dropping rate, which transforms to the more stable J2 at room temperature with very slow kinetics. This observation is ascribed to the differed nucleus sizes of J1 and J2 . During the cooling process, smaller J1 nuclei are formed first at a higher temperature, favored by the entropy effect. At intermediate temperatures, the elongation of J1 out-competes the nucleation of J2 . Then, below the elongation temperature of J2 , the formation of this thermodynamically stable aggregate is hindered kinetically, due to the depletion of monomer by the slow dissociation of J1 . Additional evidence proving the larger nucleus size of J2 is also identified with the varied-temperature spectral analyses and mathematic simulations.
Asunto(s)
Calor , Cinética , Transición de Fase , TemperaturaRESUMEN
To investigate the capability of π-π stacking motifs to enable spin-spin coupling, we designed and synthesized three pairs of regio-isomers featuring two radical moieties joined by a [2.2]paracyclophane (CP) unit. By fusing indeno units to CP, two partially stacked fluorene radicals are covalently linked, exhibiting evident antiferromagnetic (AFM) coupling regardless of the orientation of two spins. Remarkably, while possessing high diradical indices of 0.8 and 0.9, the two molecules demonstrate good air stability by virtue of their singlet ground state. Single crystals help unravel the structural basis of their AFM coupling behaviors. When two radical centers are arranged at the pseudometa-positions around CP, the face-to-face stacked phenylene rings intrinsically confer orbital interactions that promote AFM coupling. On the other hand, if two radicals are directed in the pseudopara-orientation, significant orbital overlapping is observed between the radical centers (i.e., C9 of fluorene) and the aromatic carbons laid on the side, rendering AFM coupling between the two spins. In contrast, when two fluorene radicals are tethered to CP via C9 through a single C-C bond, ferromagnetic (FM) coupling is manifested by both diradical isomers featuring pseudometa- and pseudopara-connectivity. With minimal spin distributed on CP and thus limited contribution from π-π stacking, their spin-spin coupling properties are more similar to a pair of nitroxide diradical analogues, in which the two spins are dominantly coupled via through-space interactions. From these results, important conclusions are elucidated such as that although through-space interactions may confer FM coupling, with weakened strength shown by PAH radicals due to their lower polarity, face-to-face stacked π-frameworks tend to induce AFM coupling, because favorable orbital interactions are readily achieved by PAH systems hosting delocalized spins that are capable of adopting varied stacking motifs.
RESUMEN
Polymerization sites of small molecule acceptors (SMAs) play vital roles in determining device performance of all-polymer solar cells (all-PSCs). Different from our recent work about fluoro- and bromo- co-modified end group of IC-FBr (a mixture of IC-FBr1 and IC-FBr2), in this paper, we synthesized and purified two regiospecific fluoro- and bromo- substituted end groups (IC-FBr-o & IC-FBr-m), which were then employed to construct two regio-regular polymer acceptors named PYF-T-o and PYF-T-m, respectively. In comparison with its isomeric counterparts named PYF-T-m with different conjugated coupling sites, PYF-T-o exhibits stronger and bathochromic absorption to achieve better photon harvesting. Meanwhile, PYF-T-o adopts more ordered inter-chain packing and suitable phase separation after blending with the donor polymer PM6, which resulted in suppressed charge recombination and efficient charge transport. Strikingly, we observed a dramatic performance difference between the two isomeric polymer acceptors PYF-T-o and PYF-T-m. While devices based on PM6:PYF-T-o can yield power conversion efficiency (PCE) of 15.2 %, devices based on PM6:PYF-T-m only show poor efficiencies of 1.4 %. This work demonstrates the success of configuration-unique fluorinated end groups in designing high-performance regular polymer acceptors, which provides guidelines towards developing all-PSCs with better efficiencies.
RESUMEN
With the aim to achieve air-stable polyradical species manifesting strong spin coupling, synthetic endeavors are made toward triradical molecules featuring a truxene-triyl skeleton. Commonly used steric-hindering side groups such as 2,4,6-trichlorophenyl and 9-anthracenyl are both found to be incompetent at stabilizing the targeted truxene triradical, which appears to be elusive from isolation and characterization. Nonetheless, single-crystal structures of adducts formed by relevant radicals are obtained, which strongly suggests the transient existence of the designed triradicals. Finally, a truxene triradical comprising 1-anthracenyl along with two 9-anthracenyl substituents is successfully isolated and found to exhibit decent stability in air. We propose that because of the smaller dihedral angle assumed by 1-anthracenyl with respect to the plane of truxene-triyl, more effective π-conjugation allows the spin density to be more widely delocalized and distributed to the anthracenyl side groups. Thus, higher stability is gained by the triradical molecule.
RESUMEN
By harnessing a highly efficient metal-catalyzed tandem cycloaddition reaction as the key benzannulation step, a series of cyclopolyarene nanorings of varied sizes are obtained from poly(arylene-butadiynylene) macrocyclic precursors, which can be synthesized relatively conveniently. Interestingly, due to the nonparallel bond connectivity of the repeat unit, unique Möbius topology is manifested by the cyclopolyarene nanorings composed of an odd number of repeat units, whereas cylindrical tubular structures with radial conjugation are formed with those consisting of an even number of repeat units.
RESUMEN
The mechanism of aggregation-induced emission, which overcomes the common aggregation-caused quenching problem in organic optoelectronics, is revealed by monitoring the real time structural evolution and dynamics of electronic excited state with frequency and polarization resolved ultrafast UV/IR spectroscopy and theoretical calculations. The formation of Woodward-Hoffmann cyclic intermediates upon ultraviolet excitation is observed in dilute solutions of tetraphenylethylene and its derivatives but not in their respective solid. The ultrafast cyclization provides an efficient nonradiative relaxation pathway through crossing a conical intersection. Without such a reaction mechanism, the electronic excitation is preserved in the molecular solids and the molecule fluoresces efficiently, aided by the very slow intermolecular charge and energy transfers due to the well separated molecular packing arrangement. The mechanisms can be general for tuning the properties of chromophores in different phases for various important applications.
RESUMEN
Completely understanding the working mechanisms of sophisticated supramolecular self-assembly exhibiting competing paths is very important for chemists en route to acquiring the ability of constructing supramolecular systems with controlled structures and designed functions. Here, the self-aggregation behaviors of an N-heterocyclic aromatic dicarboximide molecule 1, boasting two competing paths that give rise to different supramolecular structures and exhibit distinct thermodynamic features, are carefully examined. First, a group of H-aggregates are observed when providing a medium driving force for aromatic stacking, and their formation is manifested as an anticooperative process. When exposed to enhanced strength of aromatic interactions, these H-aggregates are found to transform into J-aggregates via a cooperative assembly mechanism. With the assistance of a mathematic model accommodating two competing polymerization pathways, calculations are conducted to simulate and explain the thermodynamic equilibria of such a unique supramolecular system. The calculation results are highly consistent with the experimental observations, and some important properties are elucidated. Specifically, the anticooperative assembly mechanism generally promotes the formation of low to medium oligomers, whereas the cooperative path is more competent at producing high polymers. If the anticooperative and cooperative routes coexist and compete for the same molecule, the cooperative formations of high polymers are significantly suppressed unless a very high degree of polymerization can be achieved. Such a unique feature of concurring anticooperative and cooperative paths emerges to the H- and J-aggregates of molecule 1 and thus brings about the interesting sequential appearances of the two types of aggregates under conditions of continuously enlarged driving force for self-aggregation. Finally, based on the knowledge acquired from this study and by analyzing the steric features of 1 that influence its supramolecular packing motifs, a slightly modified molecular structure is designed, with which the intermediate H-aggregation state was successfully suppressed, and a single cooperative J-aggregation path is manifested.
RESUMEN
Attaining control on charge injection properties is significant for meaningful applications of organic field-effect transistors (OFETs). Here, molecular electron-doping is applied with an air-stable dimer dopant for n-type OFETs based on (naphthalene diimide-diketopyrrolopyrrole) polymer hosts. Through investigating the doping effect on contact and transport properties, it is found that the electron transport increases in n-doped OFETs at low doping regime with remaining large on/off ratios. These favorable meliorations are reconciled by the mitigated impacts of contact resistance and interfacial traps, as well as the surface morphology exhibiting features of increased ordering. The occurrence of doping in the presence of dimer dopants is evidenced by the observed shift of Fermi level toward vacuum level coupled with compositional analysis. Without applying vacuum-deposition-based contact doping, charge injection efficiencies are gained without losing OFET characteristics using the solution-based methodology.
Asunto(s)
Transporte de Electrón , Compuestos Orgánicos/química , Polímeros/química , Imidas/química , Cetonas/química , Naftalenos/química , Pirroles/química , Semiconductores , Transistores ElectrónicosRESUMEN
The activation of C-H bonds in terminal alkynyl groups at room temperature was achieved in the reaction of 2,5-diethynyl-1,4-bis(4-bromophenylethynyl)benzene on Ag(111). Scanning tunneling microscopy studies showed the formation of organometallic species, whose stabilization was confirmed by density functional theory calculations, at room temperature as the product of C-H bond activation. The partial conversion of organometallic structures into covalent products of the homocoupling between the terminal alkynes was achieved by further annealing the sample at 420 K. Detached Br adatoms were suggested to play a key role in promoting the C-H bond activation. This proposal was supported by the theoretical study based on a simplified model of the system, showing the weakening of the C-H bond in the alkynyl group by an approaching Br atom. The results provide a new strategy for on-surface C-H bond activation under mild conditions, which register great potential applications in on-surface synthesis and bottom-up preparation of functional nanomaterials.
RESUMEN
The photodynamic properties involving both intra- and intermolecular triplet energy transfers (ET) of a bichromophoric photosensitizer having a tris-cyclometalated Ir(III) tethered with a pyrene derivative are studied. Due to the triplet energy gap of the two chromophores, a reversible intramolecular triplet ET equilibrium is quickly established upon photoexcitation, with the triplet exciton mainly residing on the acceptor side in the photostationary state. By virtue of the very small decay rate of triplet pyrene, a considerably extended triplet lifetime (2 ms) is observed. Next, the intermolecular triplet-triplet ET properties are investigated. Using steady-state and time-resolved spectroscopy, the ET rate constants from the Ir complex and pyrene unit in the sensitizer to an external triplet acceptor (unattached, free pyrene derivative) in solution are found to be around 109 s-1 and 108 M -1 s-1, respectively. In spite of a lower ET rate constant, the tethered pyrene serves as the main intermolecular ET channel because of the large, favorable intramolecular ET equilibrium ( K â¼ 103). Importantly, this cascade ET process, from Ir complex to linked pyrene, and then to free pyrene, offers an overall improved ET efficiency than a direct ET from Ir complex to free pyrene, by virtue of the much smaller spontaneous decay rate compared to that of the metal complex. Finally, the more efficient ET ability is demonstrated experimentally by applying the molecule as sensitizer in a triplet-triplet annihilation upconversion. The bichromophoric sensitizer achieved upconverted emission intensity 5 times higher than a monochromophoric Ir-complex analogue.
RESUMEN
A heavy-atom-free triplet sensitizer suitable for triplet-triplet annihilation-based photon upconversion was developed from the thermally activated delayed fluorescence (TADF) molecule 4CzPN by covalently tethering a pyrene derivative (DBP) as a triplet acceptor. The triplet exciton produced by 4CzPN is captured by the intramolecular pyrenyl acceptor and subsequently transferred via intermolecular triplet-triplet energy transfer (TTET) to freely diffusing pyrenyl acceptors in toluene. Transient absorption and time-resolved photoluminescence spectroscopy were employed to examine the dynamics of both the intra- and intermolecular TTET processes, and the results indicate that the intramolecular energy transfer from 4CzPN to DBP is swift, quantitative, and nearly irreversible. The reverse intersystem crossing is suppressed while intersystem crossing remains efficient, achieving high triplet yield and long triplet lifetime simultaneously. The ultralong excited state lifetime characteristic of the DBP triplet was shown to be crucial for enhancing the intermolecular TTET efficiency and the subsequent triplet-triplet annihilation photochemistry. It was also demonstrated that with the long triplet lifetime of the tethered DBP, TTET was enabled under low free acceptor concentrations and/or with sluggish molecular diffusion in polymer matrixes.
RESUMEN
In this investigation, the two-dimensional (2D) self-assembly nanostructures of a series of cyclic oligo(phenylene-ethynylene) (OPE) molecules (L1, L2-6 and L2-12) at the 1-phenyloctane/highly oriented pyrolytic graphite (HOPG) interface were thoroughly studied using scanning tunneling microscopy (STM). Comparative STM studies with their triangular Pt(ii) diimine complexes (C1, C2-6 and C2-12) were also carried out. Based on careful measurements on single molecule level STM images and density functional theory (DFT) calculations, the formation mechanisms of the nanoarrays formed were revealed.
RESUMEN
The folding and aggregation behavior of a pair of oligo(phenylene ethynylene) (OPE) foldamers are investigated by means of UV/Vis absorption and circular dichroism spectroscopy. With identical OPE backbones, two foldamers, 1 with alkyl side groups and 2 with triethylene glycol side chains, manifest similar helical conformations in solutions in n-hexane and methanol, respectively. However, disparate and competing folding and aggregation processes are observed in alternative solvents. In cyclohexane, oligomer 1 initially adopts the helical conformation, but the self-aggregation of unfolded chains, as a minor component, gradually drives the folding-unfolding transition eventually to the unfolded aggregate state completely. In contrast, in aqueous solution (CH3 OH/H2 O) both folded and unfolded oligomer 2 appear to undergo self-association; aggregates of the folded chains are thermodynamically more stable. In solutions with a high H2 O content, self-aggregation among unfolded oligomers is kinetically favored; these oligomers very slowly transform into aggregates of helical structures with greater thermodynamic stability. The folded-unfolded conformational switch thus takes place with the free (nonaggregated) molecules, and the very slow folding transition is due to the low concentration of molecularly dispersed oligomers.
RESUMEN
The self-assembly behaviors of two series of monodispersed oligomers consisting of perylenediimide (PDI) linked by ethynylene and butadiynylene spacers are investigated in solutions. In spite of the very similar chemical structures, the two sets of oligomers manifest completely different optical properties upon self-aggregation, implying differed aggregate structures. While the oligomers containing butadiynylene spacers form H-aggregates, those featuring ethynylene linkers display J-aggregation characteristics. Thermodynamic analysis revealed that the self-association constants of both series of oligomers increase with the number of PDI units in the backbones. Oligomers containing the same number of PDI units but different spacers display nearly identical enthalpy changes. According to the molecular exciton theory, the observed H- and J-aggregates are suggested to comprise similar packing motifs with slightly varied slipping angles, giving rise to greatly disparate optical properties.
RESUMEN
The nanostructures of a series of conjugated oligo(p-phenylene-ethynylene)s (OPE) adsorbed on a surface were thoroughly studied using scanning tunneling microscopy (STM). These oligomers have different backbone lengths and side chains. As a result, various nanostructures displaying periodic linear patterns at a single molecule level were obtained. Based on careful measurements on the STM images in combination with density functional theory (DFT) calculations, it could be found that the vertical and parallel distances between neighboring oligomers were responsible for the specific arrangement of the backbone and side chains. The results showed that these molecular designs strongly affect their self-assembled structure, which is important to clarify the structure-property relationship in the nanoscience field.