Fracture-driven power amplification in a hydrogel launcher.

Robotic tasks that require robust propulsion abilities such as jumping, ejecting or catapulting require power-amplification strategies where kinetic energy is generated from pre-stored energy. Here we report an engineered accumulated strain energy-fracture power-amplification method that is inspired by the pressurized fluidic squirting mechanism of Ecballium elaterium (squirting cucumber plants). We realize a light-driven hydrogel launcher that harnesses fast liquid vapourization triggered by the photothermal response of an embedded graphene suspension. This vapourization leads to appreciable elastic energy storage within the surrounding hydrogel network, followed by rapid elastic energy release within 0.3 ms. These soft hydrogel robots achieve controlled launching at high velocity with a predictable trajectory. The accumulated strain energy-fracture method was used to create an artificial squirting cucumber that disperses artificial seeds over metres, which can further achieve smart seeding through an integrated radio-frequency identification chip. This power-amplification strategy provides a basis for propulsive motion to advance the capabilities of miniaturized soft robotic systems.

Triazine and Fused Thiophene-Based Donor-Acceptor Type Semiconducting Conjugated Polymer for Enhanced Visible-Light-Induced H2 Production.

Conjugated polymers have attracted significant attention in the field of photocatalysis due to their exceptional properties, including versatile optimization, cost-effectiveness, and structure stability. Herein, two conjugated porous polymers, PhIN-CPP and ThIN-CPP, based on triazines, were meticulously designed and successfully synthesized using benzene and thiophene as building blocks. Based on UV diffuse reflection spectra, the photonic band gaps of PhIN-CPP and ThIN-CPP were calculated as 2.05 eV and 1.79 eV. The PhIN-CPP exhibited a high hydrogen evolution rate (HER) of 5359.92 µmol·g-1·h-1, which is 10 times higher than that of Thin-CPP (538.49 µmol·g-1·h-1). The remarkable disparity in the photocatalytic performance can be primarily ascribed to alterations in the band structure of the polymers, which includes its more stable benzene units, fluffier structure, larger specific surface area, most pronounced absorption occurring in the visible region and highly extended conjugation with a high density of electrons. The ΔEST values for PhIN-CPP and ThIN-CPP were calculated as 0.79 eV and 0.80 eV, respectively, based on DFT and TD-DFT calculations, which revealed that the incorporation of triazine units in the as-prepared CMPs could enhance the charge transfer via S1 ↔ T1 and was beneficial to the photocatalytic decomposition of H2O. This study presents a novel concept for developing a hybrid system for preparation of H2 by photocatalysis with effectiveness, sustainability, and economy.

Insights into the Origin of Activity Enhancement via Tuning Electronic Structure of Cu2O towards Electrocatalytic Ammonia Synthesis.

The insight of the activity phase and reaction mechanism is vital for developing high-performance ammonia synthesis electrocatalysts. In this study, the origin of the electronic-dependent activity for the model Cu2O catalyst toward ammonia electrosynthesis with nitrate was probed. The modulation of the electronic state and oxygen vacancy content of Cu2O was realized by doping with halogen elements (Cl, Br, I). The electrocatalytic experiments showed that the activity of the ammonia production depends strongly on the electronic states in Cu2O. With increased electronic state defects in Cu2O, the ammonia synthesis performance increased first and then decreased. The Cu2O/Br with electronic defects in the middle showed the highest ammonia yield of 11.4 g h-1 g-1 at -1.0 V (vs. RHE), indicating that the pattern of change in optimal ammonia activity is consistent with the phenomenon of volcano curves in reaction chemistry. This work highlights a promising route for designing NO3-RR to NH3 catalysts.

Large-fused-ring-based D-A type electrochromic polymer with magenta/yellowish green/cyan three-color transitions.

Large-fused-ring-based conjugated polymers possess wide application prospects in optoelectronic devices due to their high charge transport and wide optical absorption. In this paper, three low-bandgap donor-acceptor (D-A) type polymers PBIT-X (X = 1, 2, 3) based on alkylated benzodithiophene and tris(thienothiophene) as donors and thiadiazol-quinoxaline as an acceptor were synthesized via Stille coupling polymerization at different (donor/acceptor) D/A molar feed ratios. The band gaps of PBIT-1, PBIT-2, PBIT-3 were 1.10 eV, 1.04 eV and 1.02 eV, respectively. Spectroelectrochemistry studies showed that the three D-A type polymers have dual bands located in visible and near-infrared regions in the neutral state. The three D-A type polymers possess good electrochromic properties, such as an optical contrast of 56% and response time of 0.3 s. In particular, PBIT-3 could achieve three color changes from magenta to yellowish green to cyan during the oxidation process. The results indicate that these D-A type conjugated polymers based on large fused-ring units exhibit multiple color changes, endowing them with huge potential applications in visible and near-infrared electrochromic devices.

LncRNA NEAT1 Regulates the Development of Parkinson's Disease by Targeting AXIN1 Via Sponging miR-212-3p.

Long non-coding RNA (lncRNA) nuclear-enriched assembly transcript 1 (NEAT1) has been reported to be highly expressed in Parkinson's disease (PD). However, the mechanism of NEAT1 in PD progression has not been fully elucidated. 1-methyl-4-phenyl-1, 2, 3, 6-tetrahydropyridine injection (MPTP) was used to construct PD mouse models in vivo, and 1-methyl-4-phenyl pyridine (MPP+) was used to build PD cell models in vitro. Quantitative real-time polymerase chain reaction (qRT-PCR) was employed to test the expression of NEAT1, microRNA (miR)-212-3p and axis inhibition protein 1 (AXIN1). The viability, apoptosis and inflammation of cells were determined using cell counting kit 8 (CCK8) assay, flow cytometry and enzyme-linked immunosorbent assay (ELISA), respectively. Then, the protein levels of apoptosis-related markers and AXIN1 were measured by western blot (WB) analysis. Furthermore, dual-luciferase reporter assay and RNA immunoprecipitation (RIP) assay were performed to verify the interaction between miR-212-3p and NEAT1 or AXIN1. NEAT1 was upregulated in PD mouse models and cell models. Function experiments confirmed that NEAT1 knockdown could promote the viability, suppress the apoptosis and inflammation of MPP+-stimulated SK-N-SH cells to restrain PD progression. MiR-212-3p was downregulated in PD, and its inhibitor could reverse the suppression effect of NEAT1 knockdown on PD progression. Additionally, AXIN1 was a target of miR-212-3p, and its overexpression could invert the inhibition effect of miR-212-3p mimic on PD progression. Furthermore, AXIN1 expression was inhibited by NEAT1 silencing and promoted by NEAT1 overexpression, while these effect could be recovered by miR-212-3p inhibitor and mimic, respectively. Our results demonstrated that NEAT1 knockdown suppressed PD progression through regulating the miR-212-3p/AXIN1 pathway, indicating that NEAT1 might be a therapeutic target for neuroprotection in PD.

Fluorometric sensing of pH values using green-emitting black phosphorus quantum dots.

A fluorometric method is described for "turn-on" sensing of pH values via black phosphorus quantum dots (BPQD). Water-stable BPQD were synthesized by a liquid exfoliation method and characterized by TEM, FT-IR, XPS, and absorption and fluorescence spectra. The nanoparticles of BPQD have a uniform distribution with an average size of 5.2 nm. They exhibit bright green fluorescence, with excitation/emission maxima at 420/515 nm. The fluorescence of the BPQD is likely to arise from the quasi-molecular fluorophores of polycyclic aromatic compounds carrying P-P, P-O-P, and PxOy functions on its surface. The protonation and deprotonation of hydroxyl groups of BPQD causes a different degree of quenching of the BPQD. At pH values below 4.0, protons bind to BPQD to form non-fluorescent ground state complexes. At pH values above 4.0, the hydroxyl groups become deprotonated, and this induces the recovery of fluorescence. The sensor has a linear response in the pH range of 1.0-9.0. It was successfully applied to the determination of the pH values in human urine and serum samples. Graphical abstract Schematic representation of the preparation of black phosphorus quantum dots (BPQDs) from powdered BP crystals using liquid-phase exfoliation in N-methyl-2-pyrrolidone solution. The BPQDs display green fluorescence at high pH values but no fluorescence at very low pH values.

Multiple biological processes may be associated with tumorigenesis under NUP88-overexpressed condition.

Overexpression of the nucleoporin NUP88 has been observed in a large number of tumors and has been experimentally proven to promote tumorigenesis. However, the mechanism underlying the tumor-promoting activity of overexpressed NUP88 is not clear. To investigate the potential pathways that drive tumorigenesis under NUP88 overexpressed condition, we applied a proteomic approach to identify NUP88-associated proteins at a subcellular compartment level. Gene ontology analysis revealed significant associations between NUP88 interactome and biological processes that are related to nuclear transport, RNA processing, cell cycle progression, metabolic regulation, and viral infection. Moreover, we found that NUP88 interacts with MISP, a mitotic interactor and substrate of PLK1. Interestingly, NUP88 overexpression blocks MISP phosphorylation, which is known to be critical for normal spindle formation and accurate chromosome segregation during mitosis. In conclusion, our data for the first time provide a global view of biological processes that may drive tumorigenesis under NUP88 overexpressed condition, revealing a biological effect of NUP88-MISP interaction. Furthermore, identification of NUP88-associated proteins provides a valuable database for future studies. © 2016 Wiley Periodicals, Inc.

Lutein protects against ß-amyloid peptide-induced oxidative stress in cerebrovascular endothelial cells through modulation of Nrf-2 and NF-κb.

In the present study, we determined the protective role of lutein against Aß 25-35 peptide-induced oxidative stress and apoptosis in bEND.3 cells. Cell viability was determined through MTT assay. Reactive oxygen species, lipid peroxides, and antioxidant enzyme activities were evaluated to analyze the oxidative stress status. NF-κB and Nrf-2 downstream target protein expressions were determined through western blot. Apoptosis was analyzed through caspase activities and subG1 accumulation. The results showed that Aß 25-35 significantly increased (p < 0.001) oxidative stress biomarkers. Aß 25-35 significantly up-regulated NF-κB nuclear expression and down-regulated Nrf-2 levels and HO-1 and, NQO-1 expressions. Aß 25-35 induced apoptosis through decreasing mitochondrial membrane potential and increasing caspase 9 and 3 activities. Lutein pre-treatment significantly (p < 0.001) improved cell viability and decreased ROS levels (p < 0.001) and lipid peroxidation (p < 0.01). Lutein prevented Aß 25-35-induced NF-κB nuclear expressions and up-regulated Nrf-2 expressions. Further, lutein also improved mitochondrial membrane potential and down-regulated caspase activities and subG1 accumulation. The present study shows the protective role of lutein against Aß 25-35-induced toxicity by modulating Nrf-2 and NF-κB expressions in cerebrovascular endothelial cells.

Stroke related to androgen deprivation therapy for prostate cancer: a meta-analysis and systematic review.

BACKGROUND: Whether androgen deprivation therapy (ADT) leads to stroke morbidity is still unclear because of inconsistent evidence. We performed a systematic review and meta-analysis to evaluate if ADT used in men with prostate cancer (PCa) is associated with stroke. METHODS AND RESULTS: Medline, Embase and Cochrane Library databases up to September 30th 2014 were systematically searched with no date or language restriction, and reports from potentially relevant journals were complementally searched. Both randomized controlled trials and observational studies were included. Two reviewers independently extracted data and assessed study quality. Six observational studies finally met inclusion criteria, with 74,538 ADT users and 85,947 non-ADT users reporting stroke as an endpoint. Although no significant association was observed in pooled estimates, the incidence of stroke in ADT users was 12 % higher than control groups, (HR = 1.12, 95 % confidence interval [CI]: 0.95 to 1.32; P = 0.16). In subgroup-analyses of different ADT types, stroke was found to be significantly associated with gonadotropin-releasing hormone (GnRH) alone (HR = 1.20, 95 % CI: 1.12 to 1.28; P < 0.001), GnRH plus oral antiandrogen (AA) (HR = 1.23, 95 % CI: 1.13 to 1.34; P < 0.001) and orchiectomy (HR = 1.37, 95 % CI: 1.33 to 1. 46; P = 0.001), but not with AA alone (HR = 1.06, 95 % CI: 0.71 to 1.57; P = 0.78). CONCLUSIONS: GnRH alone, GnRH plus AA and orchiectomy is significantly associated with stroke in patients with PCa.

Elf5 inhibits TGF-ß-driven epithelial-mesenchymal transition in prostate cancer by repressing SMAD3 activation.

BACKGROUND: The epithelial-mesenchymal transition (EMT) has been associated with the acquisition of migration, invasiveness, and metastasis traits. During tumor progression, EMT can be induced by transforming growth factor-ß (TGF-ß) signal that epithelial cells receive from their microenvironment. However, the master regulatory controls on TGF-ß-EMT axis are not understood. METHODS: The protein expression in human specimens was measured by immunohistochemical staining. E74-like factor 5 (Elf5) was silenced by short interfering RNAs in LNCaP cells and stably overexpressed by HA-tagged Elf5 cDNAs in 22Rv1 cells. These cells were used to study migration and anchorage-independent growth. RESULTS: Our data reveal that Elf5 results in the failure of mesenchymal morphogenesis, upregulation of EMT markers, spheres formation, and migration in the presence of TGF-ß. Furthermore, Elf5 blocks TGF-ß signaling, through decreasing drosophila mothers against decapentaplegic protein (SMAD3) activation by binding to it, one of the major effector of TGF-ß-induced EMT. Moreover, Elf5 can serve as a prognostic marker of metastasis-free survival in patients with TGF-ß-positive prostate cancer. CONCLUSIONS: Elf5 expression is inversely correlated with EMT. Elf5 inhibits TGF-ß-driven EMT via repressing SMAD3 phosphorylation in prostate cancer cells. In addition, Elf5 can be used as a biomarker of metastasis-free survival in patients with TGF-ß-positive prostate cancer.

A review of bioinspired dry adhesives: from achieving strong adhesion to realizing switchable adhesion.

In the early twenty-first century, extensive research has been conducted on geckos' ability to climb vertical walls with the advancement of microscopy technology. Unprecedented studies and developments have focused on the adhesion mechanism, structural design, preparation methods, and applications of bioinspired dry adhesives. Notably, strong adhesion that adheres to both the principles of contact splitting and stress uniform distribution has been discovered and proposed. The increasing popularity of flexible electronic skins, soft crawling robots, and smart assembly systems has made switchable adhesion properties essential for smart adhesives. These adhesives are designed to be programmable and switchable in response to external stimuli such as magnetic fields, thermal changes, electrical signals, light exposure as well as mechanical processes. This paper provides a comprehensive review of the development history of bioinspired dry adhesives from achieving strong adhesion to realizing switchable adhesion.

Effect of thermal treatment on microcracking characteristics of granite under tensile condition based on bonded-particle model and moment tensor.

It is known that the heterogeneity caused by thermally induced micro-cracks and thermal stress can affect the mechanical behavior of granite. The laboratory-scale tests have the intrinsic limitation of non-repeatability and lack of effective methods to characterize the interaction effect between thermal micro-cracks and thermal stresses. In this study, we demonstrate how advancements in particle bonded model and moment tensor can help better understand the roles of high temperature in weakening granite and thermally induced cracking process in Brazilian test. Our results show that the types of micro-cracks (intergranular, intragranular, and transcrystalline ones) are related to their thermal expansion coefficients of mineralogical compositions. The intergranular tensile micro-cracks are predominant during the heating and heating-cooling processes. An obvious weakening of granite and non-central initiation is associated with the heterogeneity caused by the thermal damage and thermal stress. We also quantitatively evaluate the thermal damage based on orientation distribution, b-value, and nature of the sources, which gives a new microcracking perspective on tensile characteristics subjected to high temperature.

Insect-Scale Biped Robots Based on Asymmetrical Friction Effect Induced by Magnetic Torque.

Multimodal and controllable locomotion in complex terrain is of great importance for practical applications of insect-scale robots. Robust locomotion plays a particularly critical role. In this study, a locomotion mechanism for magnetic robots based on asymmetrical friction effect induced by magnetic torque is revealed and defined. The defined mechanism overcomes the design constraints imposed by both robot and substrate structures, enabling the realization of multimodal locomotion on complex terrains. Drawing inspiration from human walking and running locomotion, a biped robot based on the mechanism is proposed, which not only exhibits rapid locomotion across substrates with varying friction coefficients but also achieves precise locomotion along patterned trajectories through programmed controlling. Furthermore, apart from its exceptional locomotive capabilities, the biped robot demonstrates remarkable robustness in terms of load-carrying and weight-bearing performance. The presented locomotion and mechanism herein introduce a novel concept for designing magnetic robots while offering extensive possibilities for practical applications in insect-scale robotics.

Effects of astragaloside IV on action potentials and ionic currents in guinea-pig ventricular myocytes.

Astragaloside IV (AS-IV) is one of the main active constituents of Astragalus membranaceus, which has various actions on the cardiovascular system. However, its electrophysiological mechanisms are not clear. In the present study, we investigated the effects of AS-IV on action potentials and membrane currents using the whole-cell patch clamp technique in isolated guinea-pig ventricular myocytes. AS-IV prolonged the action potential duration (APD) at all three tested concentrations. The peak effect was achieved with 1×10(-6) M, at which concentration AS-IV significantly prolonged the APD at 95% repolarization from 313.1±38.9 to 785.3±83.7 ms. AS-IV at 1×10(-6) M also enhanced the inward rectifier K(+) currents (I(K1)) and inhibited the delayed rectifier K(+) currents (I(K)). AS-IV (1×10(-6) M) strongly depressed the peak of voltage-dependent Ca(2+) channel current (I(CaL)) from -607.3±37.5 to -321.1±38.3 pA. However, AS-IV was not found to affect the Na(+) currents. Taken together, AS-IV prolonged APD of guinea-pig ventricular myocytes, which might be explained by its inhibition of I(K). AS-IV also influences Ca(2+) signaling through suppressing ICaL.

Advancing Energy Storage and Catalysis with Novel Nanomaterials.

In the dynamic realm of materials science, novel nanomaterials possess the transformative potential to reshape various industries, ranging from energy storage to catalysis [...].

Synthesis and Characterization of Solution-Processible Donor-Acceptor Electrochromic Conjugated Copolymers Based on Quinoxalino[2',3':9,10]phenanthro[4,5-abc]phenazine as the Acceptor Unit.

Donor-acceptor (D-A) type conjugated polymers are of high interest in the field of electrochromism. In this study, three novel conjugated copolymers (PBPE-1, PBPE-2 and PBPE-3) based on quinoxalino[2',3':9,10]phenanthro[4,5-abc]phenazine (A) as the acceptor unit and 4,8-bis((2-octyldodecyl)oxy)benzo[1,2-b:4,5-b']dithiophene (D1) and 3,3-didecyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine (ProDOT-decyl2, D2) as the donor units with different donor-to-acceptor ratios were successfully synthesized through Stille coupling polymerization. The polymers were then characterized by cyclic voltammetry (CV), fourier transform infrared (FT-IR) spectoscopy, X-ray photoelectron spectroscopy (XPS), spectroelectrochemistry, thermogravimetry (TG), electrochromic switching and colorimetry. Optical band gap values were calculated as 1.99 eV, 2.02 eV and 2.03 eV, respectively. The three copolymers have good solubility, distinct redox peaks, wide absorption spectra, good thermal stabilities, bright color changes and significant electrochromic switching properties. Compared to the other two copolymers, the PBPE-3 film exhibited high coloration efficiency values of 513 cm2·C-1 at 504 nm and 475 cm2·C-1 at 1500 nm. The films have the advantage of exhibiting cathodic and anodic coloration.

Enhancing the Electrochemical Performance of High Voltage LiNi0.5Mn1.5O4 Cathode Materials by Surface Modification with Li1.3Al0.3Ti1.7(PO4)3/C.

A novel method for surface modification of LiNi0.5Mn1.5O4 (LNMO) was proposed, in which a hybrid layer combined by Li1.3Al0.3Ti1.7(PO4)3 (LATP) and carbon (C) composite on LNMO material were connected by lithium iodide. Structure and morphology analyses illustrated that a higher contact area of active substances was achieved by the LATP/C composite layer without changing the original crystal structure of LNMO. XPS analysis proved that I- promoted the reduction of trace Mn4+, resulting in a higher ion conductivity. Galvanostatic charge-discharge tests exhibited the capacity of the LNMO with 5% LATP/C improved with 35.83% at 25 °C and 95.77% at 50 °C, respectively, compared with the bare after 100 cycles, implying the modification of high-temperature deterioration. EIS results demonstrated that one order of magnitude of improvement of the lithium-ion diffusion coefficient of LATP/C-LNMO was achieved (3.04 × 10-11 S cm-1). In conclusion, the effective low-temperature modification strategy improved the ionic and electronic conductivities of the cathode and suppressed the side reactions of high-temperature treatment.

Preparation of CuO@humic acid@carbon nanotube composite material using humic acid as a coupling agent and its lithium-ion storage performance.

The conventional Li-ion battery composite electrode material composed of CuO and carbon nanotubes (CNTs) suffer from poor contact between CuO and CNTs. This results in high electrode resistance and poor electrochemical performance. To solve this problem, CuO@humic acid (HA) @CNT anode material with cross-linked network structure was generated by linking CuO and CNT with HA as a coupling agent. For comparison, CuO@HA or CuO@CNT were also prepared in the absence of CNT or HA, respectively. The results showed that CuO@HA@CNT had lower charge transfer resistance, higher conductivity, lithium-ion diffusion coefficient, specific capacity, and rate capability than CuO@HA and CuO@CNT. The specific capacity of the CuO@HA@CNT electrode was significantly better than that of the composite electrode materials of CuO and CNT, which have been prepared by scientists using various methods. Due to the introduction of HA, not only was the uniformly distributed flower-like CuO obtained, but also the specific capacity and rate capability of the electrode material were substantially improved. This study thus provides a good strategy to optimize the capability of transition metal oxide lithium-ion anode materials.

Enhanced photocatalytic hydrogen evolution activity of co-catalyst free S-scheme polymer heterojunctions via ultrasonic assisted reorganization in solvent.

In this work, two donor-acceptor linear conjugated polymers were designed and synthesized based on thianthrene-5,5,10,10-tetraoxide (TTO) as the acceptor unit, benzo[1,2-b:4,5-b']dithiophene derivative (Py1) and thiophene (Py2) as the donor units, respectively. The Py1/Py2 composite was prepared by physical ball milling of the two polymers in a mixture, which was further treated with a N-methyl-2-pyrrolidone (NMP)-assisted sonication treatment, and the obtained catalyst was named N-Py1/Py2. Compared with the single polymer or Py1/Py2, the FTIR characteristic peaks of O=S=O have a red shift for N-Py1/Py2, accompanied by a profound change in morphology. Furthermore, N-Py1/Py2 has a broader light response and more efficient separation and transport of charge carriers, and as a result it exhibits a higher photocatalytic hydrogen evolution rate (26.5 mmol g-1 h-1) without the involvement of any co-catalyst than Py1/Py2 catalyst (3.56 mmol g-1 h-1). The underlying mechanism for the enhanced photocatalytic activity by the sonication treatment in NMP is discussed based both on experimental and theoretical calculation data.

Efficient photocatalytic hydrogen evolution: Linkage units engineering in triazine-based conjugated porous polymers.

Conjugated porous polymers (CPPs) have been widely reported as promising photocatalysts. However, the realization of powerful photocatalytic hydrogen production performance still benefits from the rational design of molecular frameworks and the appropriate choice of building monomers. Herein, we synthesized two novel conjugated porous polymers (CPPs) by copolymerizing pyrene and 1,3,5-triazine building blocks. It is found that minor structural changes in the peripheral groups of the triazine units can greatly affect the photocatalytic activity of the polymers. Compared with the phenyl-linkage unit, the thiophene-linkage unit can give CPP a wider absorption range of visible light, a narrower band gap, a higher transmission and separation efficiency of photo-generated carriers (electrons/holes), and a better interface contact with the photocatalytic reaction solution. The catalyst containing thiophene-triazine (ThPy-CPP) has an efficient photocatalytic hydrogen evolution rate of 21.65 and 16.69 mmol g-1h-1 under full-arc spectrum and visible light without the addition of a Pt co-catalyst, respectively, much better than the one containing phenyl-triazine (PhPy-CPP, only 5.73 and 3.48 mmol g-1h-1). This study provides a promising direction to design and construct highly efficient, cost-effective CPP-based photocatalysts, for exploring the application of noble metal-free catalysts in photocatalytic hydrogen evolution.