Transient nuclear deformation primes epigenetic state and promotes cell reprogramming.

Cell reprogramming has wide applications in tissue regeneration, disease modelling and personalized medicine. In addition to biochemical cues, mechanical forces also contribute to the modulation of the epigenetic state and a variety of cell functions through distinct mechanisms that are not fully understood. Here we show that millisecond deformation of the cell nucleus caused by confinement into microfluidic channels results in wrinkling and transient disassembly of the nuclear lamina, local detachment of lamina-associated domains in chromatin and a decrease of histone methylation (histone H3 lysine 9 trimethylation) and DNA methylation. These global changes in chromatin at the early stage of cell reprogramming boost the conversion of fibroblasts into neurons and can be partially reproduced by inhibition of histone H3 lysine 9 and DNA methylation. This mechanopriming approach also triggers macrophage reprogramming into neurons and fibroblast conversion into induced pluripotent stem cells, being thus a promising mechanically based epigenetic state modulation method for cell engineering.

Mechanical stretch induces osteogenesis through the alternative activation of macrophages.

For reconstructive surgeons, critically skeletal damage represents a major challenge. Growing evidence indicate that bone repair is dynamically regulated by the mesenchymal stem cell (MSC)-macrophage interaction. Mechanical strain plays a fundamental role in bone repair and regeneration by influencing MSCs differentiation. Recently, a few findings indicate that macrophages may be mechanically sensitive and their phenotype can be regulated, in part, by mechanical cues. However, how macrophages subjected mechanical stretch influence the osteogenic differentiation of MSCs remain unclear. Thus, the purpose of this study is to explore the effect of macrophages stimulated with mechanical stretch on MSCs osteogenesis. By using a coculture system, we discover that macrophages efficiently induce osteogenic differentiation of MSCs under specific stretch conditions. A synergy mechanism between M2 polarization and YAP/BMP2 axis are identified through molecular and genetic analyses. Macrophages are activated by cyclic stretch and polarized to M2 phenotype that produce anti-inflammatory cytokines such as IL-10 and TGF-ß to regulate the local inflammatory microenvironment. Furthermore, mechanical stretch induces YAP activation and nuclear translocation, subsequently regulates downstream BMP2 expression to facilitate MSCs osteogenesis. These findings not only advance our understanding of the complex influence among the mechanical strain, macrophage inflammatory response as well as the osteogenic differentiation of MSCs, but also reveal a control system from mechanical signals to chemical response then to cell behaviors during bone repair and regeneration.

Diffusion tensor imaging and electrophysiology as robust assays to evaluate the severity of acute spinal cord injury in rats.

BACKGROUND: Diffusion tensor imaging (DTI) is an effective method to identify subtle changes to normal-appearing white matter (WM). Here we analyzed the DTI data with other examinations, including motor evoked potentials (MEPs), histopathological images, and behavioral results, to reflect the lesion development in different degrees of spinal cord injury (SCI) in acute and subacute stages. METHOD: Except for 2 Sprague -Dawley rats which died from the anesthesia accident, the rest 42 female rats were randomized into 3 groups: control group (n = 6), moderate group (n = 18), and severe group (n = 18). Moderate (a 50-g aneurysm clip with 0.4-mm thickness spacer) or severe (a 50-g aneurysm clip with no spacer) contusion SCI at T8 vertebrae was induced. Then the electrophysiological assessments via MEPs, behavioral deterioration via the Basso, Beattie, and Bresnaha (BBB) scores, DTI data, and histopathology examination were analyzed. RESULTS: In this study, we found that the damage of WM myelin, MEPs amplitude, BBB scores and the decreases in the values of fractional anisotropy (FA) and axial diffusivity (AD) were more obvious in the severe injury group than those of the moderate group. Additionally, the FA and AD values could identify the extent of SCI in subacute and early acute SCI respectively, which was reflected in a robust correlations with MEPs and BBB scores. While the values of radial diffusivity (RD) showed no significant changes. CONCLUSIONS: Our data confirmed that DTI was a valuable in ex vivo imaging tool to identify damaged white matter tracts after graded SCI in rat, which may provide useful information for the early identification of the severity of SCI.

Autophagy promotes osteogenic differentiation of human bone marrow mesenchymal stem cell derived from osteoporotic vertebrae.

Osteoporosis is one of the most prevalent age-related diseases worldwide, of which vertebral fracture is by far the most common osteoporotic fracture. Reduced bone formation caused by senescence is a main cause for senile osteoporosis, however, how to improve the osteogenic differentiation of osteoporotic bone marrow mesenchymal stem cells (BMSCs) remains a challenge. This study aimed to investigate the autophagic level changes in osteoporotic BMSCs derived from human vertebral body, and then influence osteogenesis through the regulation of autophagy. We found that hBMSCs from osteoporotic patients displayed the senescence-associated phenotypes and significantly reduced autophagic level compared to those derived from healthy ones. Meanwhile, the osteogenic potential remarkably decreased in osteoporotic hBMSCs, suggesting an inherent relationship between autophagy and osteogenic differentiation. Furthermore, rapymycin (RAP) significantly improved osteogenic differentiation through autophagy activatoin. However, the osteogenesis of hBMSCs was reversed by the autophagy inhibitor 3-methyladenine (3-MA). To provide more solid evidence, the hBMSCs pretreated with osteogenesis induction medium in the presence of 3-MA or RAP were implanted into nude mice. In vivo analysis showed that RAP treatment induced larger ectopic bone mass and more osteoid tissues, however, this restored ability of osteogenic potential was significantly inhibited by 3-MA pretreatment. In conclusion, our study indicated the pivotal role of autophagy for the osteo-differentiation hBMSCs, and offered novel therapeutic target for osteoporosis treatment.

[Research Progress of Graphene and Derivatives Nanocomposite in Orthopedics Application].

Graphene and its derivatives have good physical and chemical properties and biological properties,which can promote stem cell proliferation and osteogenic differentiation,and it has antibacterial properties and drug release property.Therefore,it has broad application prospects in the field of orthopedic biomaterials.This paper mainly introduces the research progress of graphene nanocomposite materials applied in the aspects of bone tissue engineering scaffold,bone repair,bone graft materials,etc.in order to provide desirable information for the future application basis and clinical research.

Construction of Integral Decellularized Cartilage Using a Novel Hydrostatic Pressure Bioreactor.

The decellularized extracellular matrix (ECM) of cartilage is a widely used natural bioscaffold for constructing tissue-engineered cartilage due to its good biocompatibility and regeneration properties. However, current decellularization methods for accessing decellularized cartilaginous tissues require multiple steps and a relatively long duration to produce decellularized cartilage. In addition, most decellularization strategies lead to damage of the microstructure and loss of functional components of the cartilaginous matrix. In this study, a novel decellularization strategy based on a hydrostatic pressure (HP) bioreactor was introduced, which aimed to improve the efficiency of producing integral decellularized cartilage pieces by combining physical and chemical decellularization methods in a perfusing manner. Two types of cartilaginous tissues, auricular cartilage (AC) and nucleus pulposus (NP) fibrocartilage, were selected for comparison of the effects of ordinary, positive, and negative HP-based decellularization according to the cell clearance ratio, microstructural changes, ECM components, and mechanical properties. The results indicated that applying positive HP improved the efficiency of producing decellularized AC, but no significant differences in decellularization efficiency were found between the ordinary and negative HP-treated groups. However, compared with the ordinary HP treatment, the application of the positive or negative HP did not affect the efficiency of decellularized NP productions. Moreover, neither positive nor negative HP influenced the preservation of the microstructure and components of the AC matrix. However, applying negative HP disarranged the fibril distribution of the NP matrix and reduced glycosaminoglycans and collagen type II contents, two essential ECM components. In addition, the positive HP was beneficial for maintaining the mechanical properties of decellularized cartilage. The recellularization experiments also verified the good biocompatibility of the decellularized cartilage produced by the present bioreactor-based decellularization method under positive HP. Overall, applying positive HP-based decellularization resulted in a superior effect on the production of close-to-natural scaffolds for cartilage tissue engineering. Impact statement In this study, we successfully constructed a novel hydrostatic pressure (HP) bioreactor and used this equipment to produce decellularized cartilage by combining physical and chemical decellularization methods in a perfusing manner. We found that positive HP-based decellularization could improve the production efficiency of integral decellularized cartilage pieces and promote the maintenance of matrix components and mechanical properties. This new decellularization strategy exhibited a superior effect in the production of close-to-natural scaffolds and positively impacts cartilage tissue engineering.

Progress in regulating inflammatory biomaterials for intervertebral disc regeneration.

Intervertebral disc degeneration (IVDD) is rising worldwide and leading to significant health issues and financial strain for patients. Traditional treatments for IVDD can alleviate pain but do not reverse disease progression, and surgical removal of the damaged disc may be required for advanced disease. The inflammatory microenvironment is a key driver in the development of disc degeneration. Suitable anti-inflammatory substances are critical for controlling inflammation in IVDD. Several treatment options, including glucocorticoids, non-steroidal anti-inflammatory drugs, and biotherapy, are being studied for their potential to reduce inflammation. However, anti-inflammatories often have a short half-life when applied directly and are quickly excreted, thus limiting their therapeutic effects. Biomaterial-based platforms are being explored as anti-inflammation therapeutic strategies for IVDD treatment. This review introduces the pathophysiology of IVDD and discusses anti-inflammatory therapeutics and the components of these unique biomaterial platforms as comprehensive treatment systems. We discuss the strengths, shortcomings, and development prospects for various biomaterials platforms used to modulate the inflammatory microenvironment, thus providing guidance for future breakthroughs in IVDD treatment.

Insight the long-term biodegradable Mg-RE-Sr alloy for orthopaedics implant via friction stir processing.

Magnesium alloys, noted for their substantial mechanical strength and exceptional biocompatibility, are increasingly being considered for use in biodegradable implants. However, their rapid degradation and significant hydrogen release have limited their applications in orthopaedics. In this study, a novel Mg-RE-Sr alloy was created by friction stir processing to modify its microstructure and enhance its degradation performance. Through microstructural characterization, the friction stir processing effectively refined the grains, accelerated the re-dissolution of precipitates, and ensured a uniform distribution of these phases. The processed alloy demonstrated improved comprehensive properties, with an in vitro corrosion rate of approximately 0.4 mm/y and increases in ultimate tensile strength and elongation by 37 % and 166 %, respectively. Notably, in vivo experiments involving a rat subcutaneous implantation model revealed a slower degradation rate of 0.09 mm/y and a uniform degradation process, basically achieving the requirements for ideal performance in orthopaedic applications. The superior degradation characteristics were attributed to the synergistic effect of attenuated galvanic corrosion and the formation of a dense Y(OH)3/Y2O3 film induced by an exceptional microstructure with a highly solid-soluted matrix and uniformly refined precipitates. Meanwhile, the alloys exhibited excellent biocompatibility and did not cause undesirable inflammation or produce toxic degradation products. These improvements in biocompatibility and degradation characteristics indicate great promise for the use of this friction stir processed alloy in osteosynthesis systems in the clinical setting.

LL-37 and bisphosphonate co-delivery 3D-scaffold with antimicrobial and antiresorptive activities for bone regeneration.

This study introduces a novel 3D scaffold for bone regeneration, composed of silk fibroin, chitosan, nano-hydroxyapatite, LL-37 antimicrobial peptide, and pamidronate. The scaffold addresses a critical need in bone tissue engineering by simultaneously combating bone infections and promoting bone growth. LL-37 was incorporated for its broad-spectrum antimicrobial properties, while pamidronate was included to inhibit bone resorption. The scaffold's porous structure, essential for cell infiltration and nutrient diffusion, was achieved through a freeze-drying process. In vitro assessments using SEM and FTIR confirmed the scaffold's morphology and chemical integrity. Antimicrobial efficacy was tested against pathogens of Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). In vivo studies in a murine model of infectious bone defect revealed the scaffold's effectiveness in reducing inflammation and bacterial load, and promoting bone regeneration. RNA sequencing of treated specimens provided insights into the molecular mechanisms underlying these observations, revealing significant gene expression changes related to bone healing and immune response modulation. The results indicate that the scaffold effectively inhibits bacterial growth and supports bone cell functions, making it a promising candidate for treating infectious bone defects. Future studies should focus on optimizing the release of therapeutic agents and evaluating the scaffold's clinical potential.

Efficacy of Chinese herbal medicine for lumbar disc herniation: a systematic review of randomized controlled trials.

OBJECTIVE: This is a review of the effects of Chinese herbal medicine (CHM) used alone to treat lumbar disc herniation (LDH). METHODS: A literature search of the following electronic databases from their inception to February 2013 was conducted: Chinese Biomedical databases, Chinese National Knowledge Infrastructure, Wanfang Database, China Science and Technology Journal Database, Cochrane Library, Web of Science, MEDLINE, and EMBASE. Randomized controlled trials where CHM had been used to treat LDH were selected. Data extraction, quality assessment, and data analysis were carried out by two independent reviewers. RESULTS: Of the 2415 studies identified, eight with complete data on 1146 patients were selected. The methodological quality was poor in all trials. Five studies reported that CHM was better than Western Medicine [OR = 2.81, 95% CI (1.27, 6.18); OR = 3.34, 95% CI (1.92, 5.79); OR = 2.22, 95% CI (1.08, 4.57); OR = 6.67, 95% CI (1.34, 33.28); and OR = 1.94, 95% CI (1.23, 3.06)]. Two studies reported that the clinical outcome was better in CHM groups than in physiotherapy and placebo groups, [OR = 3.02, 95% CI (1.08, 8.46); and OR = 2.67, 95% CI (1.26, 5.64), respectively], whereas one study reported no difference between CHM and physiotherapy groups. One study reported that CHM resulted in higher Japanese Orthopedic Association scores [MD = 7.78, 95% CI (6.67, 8.89)] than in a control group and another that participants treated with CHM had lower Visual Analogue Scale scores [MD = -0.72, 95% CI (- 0.86, -0.58)] than those in a control group. Three studies reported that the adverse effects of CHM and Western Medicine did not differ significantly [OR = 0.10, 95% Cl (0.01, 1.85); OR = 0.19, 95% CI (0.01, 4.07); and OR = 0.07, 95% CI (0.00, 1.32)]. CONCLUSION: CHM may be more effective than other interventions for LDH; however, methodological weaknesses in the studies assessed in this review prevent a definitive conclusion. More high-quality large-scale studies are required to clarify this matter.

Multifunctional Polymer Restraint of the Agglomeration of SnO2 Nanocrystals for Efficient and Stable Planar Perovskite Solar Cells.

The aggregation of SnO2 nanocrystals due to van der Waals interactions is not conducive to the realization of a compact and pinhole-free electron transport layer (ETL). Herein, we have utilized potassium alginate (PA) to self-assemble SnO2 nanocrystals, forming a PA-SnO2 ETL for perovskite solar cells (PSCs). Through density functional theory (DFT) calculations, PA can be effectively absorbed onto the surface of SnO2. This inhibits the agglomeration of SnO2 nanocrystals in solution, forming a smoother pinhole-free film. This also changes the surface contact potential (CPD) of the SnO2 film, which leads to a reduction in the energy barrier between the ETL and the perovskite layers, promotes effective charge transfer, and reduces trap density. Consequently, the power conversion efficiency (PCE) of PSCs with a PA-SnO2 ETL increased from 19.24% to 22.16%, and the short-circuit current (JSC) was enhanced from 23.52 to 25.21 mA cm-2. Furthermore, the PA-modified unpackaged device demonstrates better humidity stability compared to the original device.

Mechanical Cues Regulate Histone Modifications and Cell Behavior.

Change of biophysical factors in tissue microenvironment is an important step in a chronic disease development process. A mechanical and biochemical factor from cell living microniche can regulate cell epigenetic decoration and, therefore, further induce change of gene expression. In this review, we will emphasize the mechanism that biophysical microenvironment manipulates cell behavior including gene expression and protein decoration, through modifying histone amino acid residue modification. The influence given by different mechanical forces, including mechanical stretch, substrate surface stiffness, and shear stress, on cell fate and behavior during chronic disease development including tumorigenesis will also be teased out. Overall, the recent work summarized in this review culminates on the hypothesis that a mechanical factor stimulates the modification on histone which could facilitate disease detection and potential therapeutic target.

Intramuscular delivery of neural crest stem cell spheroids enhances neuromuscular regeneration after denervation injury.

BACKGROUND: Muscle denervation from trauma and motor neuron disease causes disabling morbidities. A limiting step in functional recovery is the regeneration of neuromuscular junctions (NMJs) for reinnervation. Stem cells have the potential to promote these regenerative processes, but current approaches have limited success, and the optimal types of stem cells remain to be determined. Neural crest stem cells (NCSCs), as the developmental precursors of the peripheral nervous system, are uniquely advantageous, but the role of NCSCs in neuromuscular regeneration is not clear. Furthermore, a cell delivery approach that can maintain NCSC survival upon transplantation is critical. METHODS: We established a streamlined protocol to derive, isolate, and characterize functional p75+ NCSCs from human iPSCs without genome integration of reprogramming factors. To enhance survival rate upon delivery in vivo, NCSCs were centrifuged in microwell plates to form spheroids of desirable size by controlling suspension cell density. Human bone marrow mesenchymal stem cells (MSCs) were also studied for comparison. NCSC or MSC spheroids were injected into the gastrocnemius muscle with denervation injury, and the effects on NMJ formation and functional recovery were investigated. The spheroids were also co-cultured with engineered neuromuscular tissue to assess effects on NMJ formation in vitro. RESULTS: NCSCs cultured in spheroids displayed enhanced secretion of soluble factors involved in neuromuscular regeneration. Intramuscular transplantation of spheroids enabled long-term survival and retention of NCSCs, in contrast to the transplantation of single-cell suspensions. Furthermore, NCSC spheroids significantly improved functional recovery after four weeks as shown by gait analysis, electrophysiology, and the rate of NMJ innervation. MSC spheroids, on the other hand, had insignificant effect. In vitro co-culture of NCSC or MSC spheroids with engineered myotubes and motor neurons further evidenced improved innervated NMJ formation with NCSC spheroids. CONCLUSIONS: We demonstrate that stem cell type is critical for neuromuscular regeneration and that NCSCs have a distinct advantage and therapeutic potential to promote reinnervation following peripheral nerve injury. Biophysical effects of spheroidal culture, in particular, enable long-term NCSC survival following in vivo delivery. Furthermore, synthetic neuromuscular tissue, or "tissues-on-a-chip," may offer a platform to evaluate stem cells for neuromuscular regeneration.

Distinct patterns of responses in endothelial cells and smooth muscle cells following vascular injury.

Vascular smooth muscle cells (SMCs) are heterogeneous, and their differential responses to vascular injury are not well understood. To address this question, we performed single-cell analysis of vascular cells to a ligation injury in mouse carotid arteries after 3 days. While endothelial cells had a homogeneous activation of mesenchymal genes, less than 30% of SMCs responded to the injury and generated 2 distinct clusters - i.e., proinflammatory SMCs and stress-responsive SMCs. Proinflammatory SMCs were enriched with high levels of inflammatory markers such as vascular cell adhesion molecule-1 while stress-responsive SMCs overexpressed heat shock proteins. Trajectory analysis suggested that proinflammatory SMCs were potentially derived from a specific subpopulation of SMCs. Ligand-receptor pair analysis showed that the interaction between macrophages and proinflammatory SMCs was the major cell-cell communication among all cell types in the injured arteries. In vitro coculture demonstrated that VCAM1+ SMCs had a stronger chemotactic effect on macrophage recruitment than VCAM1- SMCs. Consistently, the number of VCAM1+ SMCs significantly increased in injured arteries and atherosclerotic lesions of ApoE-/- mice and human arteries. These findings provide insights at the single-cell level on the distinct patterns of endothelial cells and SMC responses to vascular injury.

In Vitro Studies on Mg-Zn-Sn-Based Alloys Developed as a New Kind of Biodegradable Metal.

Mg-Zn-Sn-based alloys are widely used in the industrial field because of their low-cost, high-strength and heat-resistant characteristics. However, their application in the biomedical field has been rarely reported. In the present study, biodegradable Mg-1Zn-1Sn and Mg-1Zn-1Sn-0.2Sr alloys were fabricated. Their microstructure, surface characteristics, mechanical properties and bio-corrosion properties were carried out using an optical microscope (OM), X-ray diffraction (XRD), electron microscopy (SEM), mechanical testing, electrochemical and immersion test. The cell viability and morphology were studied by cell counting kit-8 (CCK-8) assay, live/dead cell assay, confocal laser scanning microscopy (CLSM) and SEM. The osteogenic activity was systematically investigated by alkaline phosphatase (ALP) assay, Alizarin Red S (ARS) staining, immunofluorescence staining and quantitative real time-polymerase chain reaction (qRT-PCR). The results showed that a small amount of strontium (Sr) (0.2 wt.%) significantly enhanced the corrosion resistance of the Mg-1Zn-1Sn alloy by grain refinement and decreasing the corrosion current density. Meanwhile, the mechanical properties were also improved via the second phase strengthening. Both Mg-1Zn-1Sn and Mg-1Zn-1Sn-0.2Sr alloys showed excellent biocompatibility, significantly promoted cell proliferation, adhesion and spreading. Particularly, significant increases in ALP activity, ARS staining, type I collagen (COL-I) expression as well as the expressions of three osteogenesis-related genes (runt-related transcription factor 2 (Runx2), osteopontin (OPN), and osteocalcin (Bglap)) were observed for the Mg-1Zn-1Sn-0.2Sr group. In summary, this study demonstrated that Mg-Zn-Sn-based alloy has great application potential in orthopedics and Sr is an ideal alloying element of Mg-Zn-Sn-based alloy, which optimizes its corrosion resistance, mechanical properties and osteoinductive activity.

Surface modification of electrospun fibers with mechano-growth factor for mitigating the foreign-body reaction.

The implantation of synthetic polymeric scaffolds induced foreign-body reaction (FBR) seriously influence the wound healing and impair functionality recovery. A novel short peptide, mechano-growth factor (MGF), was introduced in this study to modify an electrospun polycaprolactone (PCL) fibrous scaffold to direct the macrophage phenotype transition and mitigate the FBR. In vitro studies discovered the cell signal transduction mechanism of MGF regulates the macrophage polarization via the expression of related genes and proteins. We found that macrophages response the MGF stimuli via endocytosis, then MGF promotes the histone acetylation and upregulates the STAT6 expression to direct an anti-inflammatory phenotype transition. Subsequently, an immunoregulatory electrospun PCL fibrous scaffold was modified by silk fibroin (SF) single-component layer-by-layer assembly, and the SF was decorated with MGF via click chemistry. Macrophages seeded on scaffold to identify the function of MGF modified scaffold in directing macrophage polarization in vitro. Parallelly, rat subcutaneous implantation model and rat tendon adhesion model were performed to detect the immunomodulatory ability of the MGF-modified scaffold in vivo. The results demonstrate that MGF-modified scaffold is beneficial to the transformation of macrophages to M2 phenotype in vitro. More importantly, MGF-functionalized scaffold can inhibit the FBR at the subcutaneous tissue and prevent tissue adhesion.

Improving in vitro and in vivo corrosion resistance and biocompatibility of Mg-1Zn-1Sn alloys by microalloying with Sr.

Magnesium (Mg) and its alloys have attracted attention as potential biodegradable materials in orthopedics due to their mechanical and physical properties, which are compatible with those of human bone. However, the effect of the mismatch between the rapid material degradation and fracture healing caused by the adverse effect of hydrogen (H2), which is generated during degradation, on surrounding bone tissue has severely restricted the application of Mg and its alloys. Thus, the development of new Mg alloys to achieve ideal degradation rates, H2 evolution and mechanical properties is necessary. Herein, a novel Mg-1Zn-1Sn-xSr (x = 0, 0.2, 0.4, and 0.6 wt%) quaternary alloy was developed, and the microstructure, mechanical properties, corrosion behavior and biocompatibility in vitro/vivo were investigated. The results demonstrated that a minor amount of strontium (Sr) (0.2 wt %) enhanced the corrosion resistance and mechanical properties of Mg-1Zn-1Sn alloy through grain refinement and second phase strengthening. Simultaneously, due to the high hydrogen overpotential of tin (Sn), the H2 release of the alloys was significantly reduced. Furthermore, Sr-containing Mg-1Zn-1Sn-based alloys significantly enhanced the viability, adhesion and spreading of MC3T3-E1 cells in vitro due to their unique biological activity and the ability to spontaneously form a network structure layer with micro/nanotopography. A low corrosion rate and improved biocompatibility were also maintained in a rat subcutaneous implantation model. However, excessive Sr (>0.2 wt %) led to a microgalvanic reaction and accelerated corrosion and H2 evolution. Considering the corrosion resistance, H2 evolution, mechanical properties and biocompatibility in vitro and in vivo, Mg-1Zn-1Sn-0.2Sr alloy has tremendous potential for clinical applications.

Prevalence of Salmonella infecting bacteriophages associated with Ontario pig farms and the holding area of a high capacity pork processing facility.

BACKGROUND: There is interest in applying bacteriophages to control Salmonella in pig production and pork processing. The following reports on the prevalence of Salmonella infecting bacteriophages within Ontario pig farms and associated with the holding area of a pork slaughterhouse. RESULTS: Salmonella infecting bacteriophages were present in 30 and 28 of the effluent manure samples collected from 36 farms using S. Typhimurium DT104 or S. Heidelberg as host cell respectively. Bacteriophages were recovered in 95-100% of the 48 samples taken from holding pens within a high capacity slaughterhouse over a 12 month period. Bacteriophages isolated from farms exhibited similar host ranges which differed to that of slaughterhouse isolates. Salmonella (n = 21) from the slaughterhouse were susceptible to the endogenous bacteriophages. Despite being susceptible to the resident phages, the Salmonella populations were found to be genetically stable with the same genotypes being recovered over successive visits. Salmonella isolated from the farms were frequently resistant to the endogenous phages. CONCLUSIONS: Bacteriophages are prevalent in the pig slaughterhouse environment although they do not have a significant impact on the genetic structure of Salmonella populations. However, there was evidence that the Salmonella population structure on farms is influenced by the presence of infecting phages.

In vitro and in vivo evaluations of nano-hydroxyapatite/polyamide 66/yttria-stabilized zirconia as a novel bioactive material for bone screws: Biocompatibility and bioactivity.

Zirconia and its derivatives have been receiving increased levels of attention with regard to their potential application in bone tissue engineering. These materials are of particular interest because of their excellent characteristics, such as superior biological and mechanical properties. In this study, yttria-stabilized tetragonal zirconia (YTZ)-reinforced nanohydroxyapatite/polyamide 66 (nHA/PA66) bone screws were prepared. The biocompatibility and bioactivity of nHA/PA66/YTZ were evaluated in vitro using MC3T3-E1 cells. Biocompatibility and bioactivity experiments (cell counting kit-8 tests, cell immunofluorescence analysis, and polymerase chain reaction) showed that nHA/PA66/YTZ could facilitate the biological functions of MC3T3-E1 cells. The attachment, proliferation, spreading, and expression of genes associated with osteogenesis (collagen 1, osteopontin, and osteocalcin) in cells cultured with the nHA/PA66/YTZ composite were all superior compared with the control groups (P < 0.05). In addition, nHA/PA66/YTZ bone screws were implanted into the femoral condyles of rabbits, and titanium screws were employed as a control group; postoperative histology and blood analysis revealed no obvious damage to the liver, kidneys, or any other major organs in either of the experimental groups. Moreover, nHA/PA66/YTZ screws resulted in significantly better bone-implant contact interfaces and enhanced formation of trabecular bone (P < 0.05); these characteristics were markedly better than those in the group that received titanium screws. These observations indicate that YTZ-reinforced nHA/PA66 composites have significant potential for applications in bone tissue engineering.

Controlled release of basic fibroblast growth factor from a peptide biomaterial for bone regeneration.

Self-assembled peptide scaffolds based on D-RADA16 are an important matrix for controlled drug release and three-dimensional cell culture. In this work, D-RADA16 peptide hydrogels were coated on artificial bone composed of nano-hydroxyapatite/polyamide 66 (nHA/PA66) to obtain a porous drug-releasing structure for treating bone defects. The developed materials were characterized via transmission electron microscopy and scanning electron microscopy. The proliferation and adhesion of bone mesenchymal stem cells (BMSCs) were examined by confocal laser microscopy and CCK-8 experiments. The osteogenic ability of the porous materials towards bone BMSCs was examined in vitro by staining with Alizarin Red S and alkaline phosphatase, and bioactivity was evaluated in vivo. The results revealed that nHA/PA66/D-RADA16/bFGF reduces the degradation rate of D-RADA16 hydrogels and prolongs sustained release of bFGF, which would promote BMSCs proliferation, adhesion and osteogenesis in vitro and bone repair in vivo. Thus, it deserves more attention and is worthy of further research.